Synchronization object between vROPS and vCenter

Similar Questions

• How to synchronize data between essbase and planning?

  I have an essbase database and a classic of planning an application. They're all two-dimensional entity, year, period and account. I want to synchronize these dimensions. For example, new essbase created members are automatically copied into the planning. Should what tool I use? Dimensions can be shared between essbase and planning?

  To be honest it looks like you after some of the features within the EPMA, although if you have an essbase database then you will certainly be a source for dimensions for this can be used to fill the demand for planning as well.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Firewall between ESX and vCenter vLAN & Production vLAN

  Hello

  Scenario:

  2 ESX hosts with Teddy bear 6. 2 to vLAN S.C. & VMotion, 2 to vLAN DMZ and 2 for the Production of vLAN.

  There are 2 pSwitches to battery-Mode Cluster, having 4 VLANS.

  1. Production of vLAN1

  2. vLAN2 DMZ

  3. Service vLAN3 console

  4. vLAN4 VMotion

  Connectivity is fine no problem. All VLAN works them very well. Service console and VMotion they fold each other so pSwitch failure failure or Teddy bear.

  Requirements:

  Service console is connected in vLAN3 which is 172.16.20.0/24 network under vSwitch0 contains 2pNICs & 3 exchanges.  Service Console PortGroup, VMotion PortGroup & vCenter PortGroup. vCenter PortGroup I want to place the VirtualCenter VM & I'll put the virtual computer's firewall.

  Currently, the Center Virtual under vCenter PortGroup, which is 172.16.20.55. Communication to ESX all very well.

  How I connect to VirtualCenter & ESX host while I am putting in the Production vLAN? I added a static Route in my P.C. 172.16.20.0 to go via 128.104.145.149 "this is the IP address pSwitch" I connect very well without any problems. Of course that does not protect the farm ESX and virtual Center.

  I want to secure the connection between the Production vLAN & Console of service of VMotion vLAN & get rid of the Static Route in the computers in the Admin.

  Bypass the Options:

  1. Physics MS ISA Server with 2 natachasery one be connected in the vCenter PortGroup & to be connected in the Production vLAN & open ports to demand it.

  2. Physical firewall of Teddy 2 a be connected in the vCenter PortGroup & to be connected in the Production vLAN and open ports require.

  3. Virtual Firewall 'SmoothWall or ISA Server' with 2 teddy bears that are connected in the vCenter PortGroup & to be connected in the Production vLAN and open ports require.

  Please take a look at the diagram attached & tips.

  Best regards

  Hussain Al Sayed

  Hello

  On your diagram, I would change your colors. Orange traditionally involves a DMZ not green, but it is up to you. I use Smoothwall for exactly the same behavior.

  Network <-> pNIC1 <-> vSwitch1 <-> vFW (smoothwall) <-> DMZ Network
  ....................................................<-> Green Network
  

  If your front firewall controls access to everything. You can use 'two' firewalls so if you just want to have a set of Red<->Green Networks. On the first, the Red network is outside, green is the demilitarized zone, in the second, red is the demilitarized zone and the ESX hosts are green.

  To grant access to your ESX hosts from a system outside the firewall, you must enable and redirect port 443 to the appropriate location. In fact, I wouldn't do that, create a virtual machine or physical box that is inside the firewall, use the VPN and OpenVPN Tarek Smoothwall addon in the internal location or create a pinhole that allows RDP access to this host/VM and then use the VIC of in the "green network". You must put the kingpins holes in your firewall to grant access you need, so a VPN works much better. You want to limit the number of holes of PIN you use.

  What you describe is quite feasible, but without the holes of the kingpins and proper routing through the firewall is not possible.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• ? How to synchronize Notes between iPhone and Macbook

  I can't get Notes on my iPhone 6 to synchronize with Notes on my MacbookPro OS Yosemite, or the other way around. I have them both set in place with iCloud. I want the Notes I put on my iPhone appears on the Notes on my Macbookpro and vice versa. Is this possible?

  Thanks in advance,

  NanaCA

  See quote below until you upgrade your notes - Apple Support

  While you can upgrade your notes now on your iPhone, iPad or iPod touch with iOS 9, you will not see the new features on your Mac until you download El Capitan. Notes on your Mac will remain the same, and they are used to sync with your iPhone, iPad or iPod touch that have updated notes.

• Synchronize Notes between Mac and iphone

  How can I synchronize Notes created on my MacAir to my iphone and vice versa? I have active iCloud but still does not.

  The following contains information that can help. iCloud: overview of Notes

  ALS see the following quote from the link above:

  However, if you upgrade your iCloud of Notes on an iOS device account 9 or a Mac with OS X v10.11:

  • Your notes on these devices and iCloud.com keeps them abreast of the notes on any of your devices with iOS 8.4.1 or an earlier version, OS X v10.10.5 or earlier, or Windows.

• How to synchronize contacts between WM and WLM

  Vista Home Premium SP2
  WM and WLM 14.0.0726

  I'm not sure this is the right forum, but the answers doesn't have a section of Windows Live Mail.
  Anyway, WLM is my default and I rarely use WM.
  I have more contacts in WLM in WM.
  I thought the 2 to synchronize the contacts list. Obviously not.
  Sort can I sync them?

  t-4-2

  Hello

  The question you have posted is related to Windows Live mail and would be better suited to the online Windows Live community. Please visit the link below to find a community that will provide the support you want.

  http://windowslivehelp.com/

  Concerning
  Anthony.

• How to synchronize video between iPhone and creative cloud

  I wonder how do I sync my video from my iPhone to creative cloud. Is this possible?

  Synchronization is not available but you can download a video using the iOS app Adobe Creative cloud on the App Store on iTunes here or active site in your browser to https://assets.adobe.com/.

• Required network ports between vCops and vCenter?

  What are the required ports enable vCops to manage vCenter in a service provider environment?

  Thank you

  -MattG

  vC Ops needs simply to connect to vCenter SDK on port 443

• iPhone 6 s + iOS 9.3.1 not synchronize photos between icloud/devices

  A week ago my iphone stopped synchronize photos between devices and, apparently, it is not synchronized with icloud at all. Just test it: I took a picture of my iphone and the ipad. iPhone does not have transfer the photo to icloud, made ipad. (checked on the web)

  I tried to turn off the icloud photo library and then he turned his back, did not help.  Photos iPhone app can say 'update now', but nothing really happens.

  iCloud works with my ipad (ios 931) air2 if.

  iPhone 6s +.

  iOS 931

  iCloud

  Have you tried signing off iCloud on the phone, wait a few minutes and then reconnect?

• Data transfer between PC and device

  Hello

  I need an advisor. I was wondering what would be the best way to transfer data from the PC to a connected device?

  Here's the scenario: I need to download a large amount of data from a web service. To do this, I use a small application installed on the user's PC. Once the data is downloaded and converted, the application converts it to an xml file. I would push this file or string with the XML itself to the device that will be connected through the USB port.

  In addition, the scenario reversed: I can access the PC to the device file system?

  Thank you

  Daniel

  Hi Daniel,.

  You just need to synchronize data between PC and device and device to the PC. I'm wrong?

  There are 2 ways to do it.

  (1) Intellisync APIs, (Director of office requires)-net.rim.device.api.synchronization

  (2) USB connection. (Doesn't require no Office Manager)-use streamConnection

  You will get the USBsample in samples of JDE. I guess that as the example of synchronization is in examples of JDE applications.

  Please reply,

• Open connections of hosts and vCenter Server Appliance

  We have number of ESXi hosts configured in our environment with vCenter 5.1, far ssh is open to all in order to access all hosts via SSH. Although authenticating the users available but, even then, the issue raises so bound / restrict administrators IPs or subnet of the network for security reasons. Will be the same for vCenter Server Appliance.

  Also can we restriction of IP level for the Vmware Client users, good that now everyone can make the connection between vSphere and vCenter cleint. Please advice

  Hi friend

  Please see below the resources needed to achieve the same on ESXi

  http://www.definit.co.UK/2013/10/vSphere-Security-Advanced-SSH-configurations/

  Restrict access to the ESXi host Console - see the lock Mode. VMware vSphere Blog - VMware Blogs

  Limit the vSphere Client access to IP or network - Firewall 5 ESXi & raquo; System administrators

• Synchronize the beetween HSS and planning question

  Hi all
  
  Product: Planning 11.1.1.2
  
  We had a problem on the server HSS and we cannot restore file OpenLdap.
  We had to re-create groups on HSS, but these groups are not synchronized with the planning groups (I guess that different SID)
  
  Do you know if the UpdateUsers utility I synchronize SID between HSS and planing?
  If this is not the case, do you think I can change the SID directly in the tables of HSS or repository of planning so that the two will be the same?
  
  Is there another solution?
  
  Thank you very much
  
  Sébastien

  If users were the provision of Shared Services, then you can give the utility updateusers a go and see if it syncs the planning tables save with Shared Services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Problems using rpc between Flex and CF

  Hello
  I have a problem to send objects between Flex and Coldfusion using the gateway of the AUTHORITY of the new Version of Coldfusion.
  The transfer of CFCS to Flex works, but I can't send a complex object to a CFC.
  
  The Error Message is:
  faultCode:Client.Message.Encoding faultString:' cannot create class of type 'flex. HotlineSystem.bin.cf.Category'. ' faultDetail: 'Type' flex. HotlineSystem.bin.cf.Category' not found. »
  
  Im going totally nuts... the transfer of CF to Flex works very well, the mapping between category.cfc and category.as work of ist. But if I try to send a Flex object category to my CFC is not.
  
  I hope someone can help.
  
  Thank you!
  
  CFC function:
  < cffunction "insertCategory" access = "public" returntype = name = "Sub" output = "false" >
  < cfargument = "category" type name = 'flex. HotlineSystem.bin.cf.Category"required ="true">
  
  < cfquery name = "insertCategory" datasource = "hotline_system" >
  INSERT INTO category (category_idCategory, name)
  VALUES (#category.getCategory_IdCategory () #, ' #trim (category.getName ()) #')
  < / cfquery >
  
  
  Category.CFC:
  
  < cfproperty displayname = 'Category' alias = 'flex. Index HotlineSystem.bin.cf.Category"=" I model a single category ">
  < name cfcomponent = "idCategory" type = "numeric" default = "0" >
  < name cfcomponent = "category_idCategory" type = "numeric" default = "0" >
  < name cfcomponent = "name" type = "string" default = "" >
  
  < cfscript >
  Initialize the SWC with the default property values.
  variables.idCategory = 0;
  variables.category_idCategory = 0;
  variables. Name = "";
  < / cfscript >
  
  < name cffunction = "init" output = "false" returntype = "flex. HotlineSystem.bin.cf.Category">
  < cfreturn this >
  < / cffunction >
  
  < name cffunction output = "getIdCategory" = "false" access = "public" returntype = "any" >
  < variable cfreturn. IdCategory >
  < / cffunction >
  
  < name cffunction output = "setIdCategory" = "false" access = "public" returntype = "Cancel" >
  < name cfargument = "val" required = "true" >
  < cfif (IsNumeric (arguments.val)) or (arguments.val EQ "") >
  < cfset variables. IdCategory = arguments.val >
  < cfelse >
  < cfthrow message = "' #arguments.val #' is not a valid numeric" / >
  < / cfif >
  < / cffunction >
  
  < name cffunction output = "getCategory_idCategory" = "false" access = "public" returntype = "any" >
  < variable cfreturn. Category_idCategory >
  < / cffunction >
  
  < name cffunction output = "setCategory_idCategory" = "false" access = "public" returntype = "Cancel" >
  < name cfargument = "val" required = "true" >
  < cfif (IsNumeric (arguments.val)) or (arguments.val EQ "") >
  < cfset variables. Category_idCategory = arguments.val >
  < cfelse >
  < cfthrow message = "' #arguments.val #' is not a valid numeric" / >
  < / cfif >
  < / cffunction >
  
  < name cffunction = output "getName" = "false" access = "public" returntype = "any" >
  < variable cfreturn. Name >
  < / cffunction >
  
  < name cffunction = output "setName" = "false" access = "public" returntype = "Cancel" >
  < name cfargument = "val" required = "true" >
  < cfset variables. Name = arguments.val >
  < / cffunction >
  < / cfproperty >
  
  Category.As:
  
  package classes
  {
  [Bindable]
  [RemoteClass (alias = "flex. HotlineSystem.bin.cf.Category")]
  dynamic public class
  {
  public var idCategory:int;
  public var category_idCategory:int;
  public var name: String;
  
  public void category() {}
  
  }
  
  public void fill(idCategory:int,_category_idCategory:int,_name:String):void {}
  this.idCategory = idCategory;
  This.category_idCategory = category_idCategory;
  myIdName = name;
  }
  
  
  public function getIdCategory (): int {}
  Return this.idCategory;
  }
  
  public function setIdCategory (): void {}
  this.idCategory = idCategory;
  }
  
  public function getCategory_IdCategory (): int {}
  Return this.category_idCategory;
  }
  
  public void setCategory_IdCategory(category_idCategory:int):void {}
  This.category_idCategory = category_idCategory;
  }
  
  public void setName(name:String):void {}
  myIdName = name;
  }
  
  public function getName (): String {}
  Return myIdName;
  }
  }
  }
  

  Problem solved:
  Apparently, it is not possible to transfer an object from a class action script for coldfusion.

  The solution is to encapsulate the object (in my example category) in a table.

  Strange... but it works.

  Best regards

• Cache objects VI shared between 32 and 64 bit?

  Transferred into the LAVA: http://lavag.org/topic/16349-vi-object-cache-shared-between-32-and-64-bit/page__pid__99898

  I am currently working on a major project that is to be deployed in 32 - bit and 64-bit flavors. This means that I must periodically switch between installed versions of LV to build.

  It * seems * that if I work in 32-bit BT, and then I close and re-open my project in 64-bit BT, that everything needs to recompile... even if I had only changed a few things since the last, I worked in 64-bit.

  It seems that while LV keeps a Cache of objects VI separate for each version of LV, that it does NOT keep a cache separate for 32-bit versions and 64-bit. Is this really the case?

  Fabric Hello,

  LabVIEW maintain separate caches for versions 32-bit and 64-bit of the same version, but in the same file. They are separate entries in the objFileDB. Because 32-bit and 64-bit are very different beasts, the project must be recompiled in order to adapt to the new platform every time that you open in a new environment. It is possible to separate the compiled source code code. Research in the other forum posts, this separation likely to cause a higher risk of corruption VI.

  Best,

  tannerite

• Sync Center will synchronize MS Office files between HDD and USB/SD removable media?

  I use Windows Vista Ultimate SP 2 installed on a Dell laptop.  Can I use Sync Center to sync files between the HDD from the laptop and removable media USB/SD MS Office?

  I ask because the option 'Always available offline' does not appear when I right click on any folder to removable media connected to the laptop.

  Hi Patrick,

  You can synchronize files using Sync Center if you have a mobile device that supports this feature of Windows. However, Sync Center is designed primarily to synchronize files with a server on your network, rather than with a camera.

  Sync Center does not synchronize with external drives and USB key.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-frequently-asked-questions

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think