Synchronize the object

Similar Questions

• store the object reference handle (MOR) to synchronize with the virtual center of vSphere

  Hello

  I am able to store a bit in my own DB and assume that they don't change, so that I can match the entities in the virtual centre with those of my database loading my application?

  Document best practices of Balaji Parimi (http://communities.vmware.com/docs/DOC-9912) States:

  Caching of managed object references rather than their
  Properties makes it easy to keep the cache to update. It is easier to maintain
  the cache, as the references remain unchanged until the managed object is removed from the inventory of managed object.

  Because of this comment, I am inclined to believe that I should be able to write the bit on my side in the DB and use them as described.

  Why I ask this is because:

  • It seems that a lot of people is keen to track VMs by uuid.  I'm guessing they are only followed VMs, otherwise they would probably have the same problem I'm having (ex: If a Resource Pool gets renamed while the application is down, how can you identify whether the same as the one you had).

  • The vSphere Web Services SDK Programming Guide seems to be confusing by having a section entitled Do not store Managed Object reference values.  This section seems just to point out that the MOR is not the same between the vCenter server and ESX box.  Because I don't like to manage the host communicating directly with it (and keep track of the GPR in this way), I don't see how this would apply.

  Has anyone been matching their own entities vmware with JAWS?  Is there a reason for (am I wrong something)?  Wouldn't be wonderful if this confusion has been cleared up by Balaji Parimi or VMware themselves.

  Thank you

  Ivan

  The recommendation contained in the best practices doc is right.

  You can store the MOR of an entity in your DB.

  For such objects as hosts, VMs data warehouses, etc... Essentially, this is the unique key that identifies the object.

  And the MOR will change during the lifetime of this object in the DB vCenter.

  The only way it modifies if it removes and adds the object. So for all practical purposes it is a new object anyway.

  What the program guide refers, is the fact that this MOR the 'ID' of the object is only within this system namespace.

  Thus, the VM MOR is unique within the Victoria Cross.

  That MOR are only may not or may not even be object even if you connect directly to the ESX host using the SDK.

  The guide is just trying to clarify that the MOR of a VMS in vCenter isn't the same as if you connect to the ESX host directly.

  That said, if you never connect to the ESX host directly you must not care about this specific recommendation in the guide.

  Hope that clarifies things.

• The object has in anticipation of m: n tasks of commissioning

  Synchronization log shows "the object (grp_name) (LDAPGroup) has been ignored during synchronization. "Reason: the object is in the expectation of m: n tasks of commissioning.

  In which tables are found these pending tasks?

  Thank you!

  

  You can see the DPRMemberShipActiontable. The XObjectKey of your group must appear in the ObjectKeyBaseproperty.

  Explanation you still provisioning of the jobs in the queue of work for these groups.

• work on deleting the object from the persistent store.

  Hello

  I use permanent storage to store custom objects, I am able to save, retrieve, and update object. I'm ranger object persistent using State figure "obj" below.here is my custom object that implements Persistable interafce.

  PersistentObject store = PersistentStore.getPersistentObject (0xa1a569278238dad2L);

  store.setContents (obj);

  Store.Commit ();

  But, when I'm trying to delete 'obj' to permanent storage, I found it is ignored, I use possible subsequently remove the object

  permanent storage.

  PersistentStore.destroyPersistentObject (0xa1a569278238dad2L);

  but when I try to get again in my code by using the following statement

  MyObject obj = store.getContents ();

  I get all the properties of 'obj', is there a programmatic way to destroy the object of permanent storage? or is it expected behavior?

  Make sure that you not only remove the store, but also get the new PersistentObject object thus:

  PersistentStore.destroyPersistentObject (key);

  PersistentObject persistObj = PersistentStore.getPersistentObject (key);

  Object myObject = persistObj.getContents ();

  If this does not work then you might have some problems with synchronization - remove any synchronization around this code and check again.

  See you soon

  Nik

• How do I synchronize the columns added in Jdeveloper Studio Edition Version 11.1.1.7.0 views

  Hello

  I added a few columns in the database Table and I want to synchronize my point of view on this basis. I am able to synchronize entities, but how do I synchronize the based entity views or views in general?

  Thank you

  Vicky

  And to display objects that are not based on an entity, you must change the query

  

  will appear as

  

  Timo

• SDDM 4.0 - synchronize the data dictionary can not detect existing CF

  I started a data model implemented in version 3 of SDDM somewhere, then had to ask for about 9 months and pick it back up.  When I picked up back, 4.0 RC3 shone, so I used to work on the old model.  Some problems have emerged, and one that is currently more frustrating is when I use the "Sync data dictionary" feature to create the DDL to change the physical table based on changes to the model that I made.

  I used to be able to just do a right-click on the table, choose Synchronize the data dictionary, and then only the changes I made would be generated.  Now, however, the function Compare seems to not be able to detect certain properties of the physical implementation table he is comparing it to.  For example, there is a table with FK 3 and compare it detects that one of them, then it attempts to create them from scratch.  Of course fails because there are actually the CF.  I tried not to drop and re-create the keys in the comics because I don't want to go to this effort for each table.

  I can post screenshots if you illustrate the problem like this.  Does anyone have advice?  It seems that there is a bug in the software.  Thank you.

  Hi Mike,.

  Thanks for reporting the problem. I logged a bug for this.

  The synchronization works without problem if all of the tables involved are included in the sync operation. The problem is caused by PK/UK constraints with system-generated names.

  You can call the synchronization on a selection of objects (one or more), on a subview or the entire model. You can use "Select neighbors" in order to obtain selected related objects or

  'Create subview with neighbors' available in the context menu for the table in the browser.

  Philippe

• Update the view of the objects when existing entity object is changed

  I created display objects of entity objects.  recently, I added a function that creates a guid in a field to these entity objects.  a little, I suppose that if I open the view related object, it would show this guid generator function in the default value field.  but it does not.

  so, you can synchronize the view objects and entity objects with the database, how you synchronize objects of respective view when their principal object attribute properties is changed?

  Thank you

  By default in EO and VO properties are not related.

  In OE, the default value is applied when you create a new line.

  Vo, the default value is applied to the transition attribute.

  Dario

• Synchronize the dictionary of data with model only works for models imported?

  When I imported data dictionary model (file-> import-> data dictionary) then in relational model the two buttons "Synchronize Data with Model Dictionary" and "Synchronize model with Data Dictionary" works very well.
  
  But when I model created from scratch and I'm clicking on the buttons "Synchronize data dictionary with the model" or "Synchronize model with Data Dictionary" nothing happens.
  
  It works only for models imported?
  
  (Data model EA 3.3)

  Hello

  Yes, Synchronize only works for objects that were imported to the original (like Synchronize uses the information entered during the import to determine which database connection and the database object to compare to).

  If your model is not imported, you can achieve the same effect as follows:
  -Open the template in Data Modeler and also open the relevant physical model.
  -Do an Import of data dictionary, select the objects you want to compare with that.

  After the import phase, this will display the dialog box to compare, showing the differences between the objects imported from the database and your model.

  Note that if you intend to generate the DDL to update your database of the difference (as in "synchronize with Model Data Dictionary"), you must select the "Swap Target Model" option in step 2 (select database schema) data dictionary import wizard.

  David

• Synchronize the table changes

  Hello
  
  OWB 11 g R2, oracle DB 11 g
  
  For some reason... I changed my table at the DB level definitions, added a few columns and load the data using some scripts in this table. I have this table in OWB (old version without these additional columns), is any way to synchronize table of DB to OWB definitions? or I have to redo all changes in OWB? If I deploy by changing the table in OWB manually and then deploy, I guess that it does not allow to upgrade, but if I do not replace, there is a risk of losing data.
  
  Is it possible to do that without losing data?
  
  
  Thank you
  HESH

  Hi Hesh,

  Yes, this applies if you have created the table through OWB or DB, if you have made changes to the DB level table you can reimport the table on OWB and synchronize, you must modify the object in OWB manually, it is a tedious process if the changes are enormous.

  Thank you and best regards,
  Pnreddy

• Master - Detail of the object View and Javabean

  I have a table with data from VO (database, let's say in table A). This table has Id, name and processId table. I also have a second table below the first table, what data comes from a javabean (source data not DB). I created this bean data control, which in turn, I created the second table.
  What I want to achieve, it is when a user to select a row in the first table, I wish that the second table is updated according to the processId value of the selected row in the first table.
  Would you share how to do it?
  
  Thank you.

  Hello

  my Oracle Magazine July/August 2012 column covers a similar use case of Web Services that work in a relationship master / detail with ADF business components view objects. In this article I recommend using the programmatic view objects and entities that this ensures the consistency of the master / detail is handled by the template and cannot be controlled manually on the view layer. I think that the possibility of using a JavaBean domain controller and synchronize it with the object View is a valid option, however, if the rest of your application using ADF business components then I would consider programmatic view objects (and entities if the app is CRUD to the POJO too)

  Here's a sample and a good report:

  http://jobinesh.blogspot.in/2011/06/building-programmatically-managed_25.html
  http://jobinesh.blogspot.in/2011/06/building-programmatically-managed.html

  Frank

• How to synchronize the data with the existing database maker?

  Hello
  
  is it possible to synchronize data with an existing database maker in data as Oracle designer maker
  -Connect to existing database
  -Generate a script (change if the object exist create if exists or not,...)
  -Run the script
  
  Thank you

  I created a quick demo and hung in [my blog: http://sueharper.blogspot.com/2009/08/updating-database-using-detail-from.html] or directly from [here: http://www.screentoaster.com/watch/stVEpWRUBIR11WRVlbXFpZVlRX/update_the_database_using_oracle_sql_developer_data_modeler]

  Sue

• Synchronize the Oracle database

  I have direct Oracle 9i R2 Database on TRU 64 Unix 5. 1 b and test\development environment on Windows 2003.
  
  The database is instant 2 months old, now we want to update the data with the latest news from live. I want to import the main schema with the setting ignore = y, but I see tables have no unique or primary key on the table and there are more than 10,000 tables in all, import can duplicate data.
  
  Exp/Imp same incremental might not help because there is no structural changes in the database.
  
  What is the best way to update/synchronize the database with the most recent data without duplicating records. ?
  
  Using an oracle/third party tools?
  
  Appreciate the comments.
  
  Thank you.

  To export only the data changed since the last export, you must ensure that all tables in the database contains a column that lists them when a row is inserted or updated, and a window of downtime in production for each update that makes sure that no data changes intervene during the time the export is run. That seems pretty unlikely.

  While replication is a theoretical possibility, which is probably not practical. You do not want the objects in lowest environments to be materialized views, you want that they act as matching the production items. Generally, you do not want to incur the overhead of tracking and storage of the changes in the production database in order to make updates in the lowest environments. In addition, you do development in the lowest environments, so you should have to constantly change the replication code to match the new environment.

  I guess you can register a third-party replication tool, but who will have the same scope of issues that would be to use the Oracle replication. You must have a staging area potentially huge staging all data changes, you put an overhead on all data bases of production, and you would still have issues with screwing the process of replication of schema changes.

  The safe and sane solution is almost always blow the less environment and do a complete refresh of production.

  Justin

• Synchronize the iPhone with pictures of Mac pictures

  Hi everyone, first post

  So my situation is I want to synchronize my Mac and my iPhone in such a way so that when I delete a photo of Photos from my Mac, he or she gets removed from my iPhone and visa versa - but there is a problem.

  I synced photos from my iPhone to my Mac in iTunes, hoping it would synchronize the actions so that I would be able to sort my content on my Mac and have everything what I remove synced to my phone, so it is deleted from there too. Unfortunately, which ended by happens is that many pictures on my phone have been reproduced and now I basically have 2 half of all my photos, a version which I am not able to remove. I can't simply delete the half that's disposable, because not all of them have been reproduced. I'm a little puzzled.

  So my question to you all is how to sync Photos to my phone with pictures of my Mac so that when a picture is deleted one, it is also deleted the other?

  Thank you!

  In addition, Mac running macOS Sierra and the iPhone is running iOS 10

  This using the library to iCloud. For questions about the Photos.app and the iCloud library find the Photos for Mac forum, here:

  Photos for Mac

• Can I synchronize the activity of health between two watches from Apple?

  I have two Apple - one for work, one for out watches. If I change watches in the middle of the day, the follow-up of the first watch of activity is not synchronized with the second watch. Is it possible to enable this so that the follow-up activity is specific for the whole day?

  Thank you!

  N ° it is not possible to synchronize the activity of health between two watches from Apple.

• How drag and drop a picture into a shape of the object?

  On my old Lion system that I used to be able to drag a picture from iphoto in the shape of the object open in Pages.  I can't be able to do more.  The system changed?  I tried to use Inspector (under help), but it won't let me access the file of the photo on the right.

  You can drag and drop a picture in a form in v4.3 Pages ' 09, but this can be done in any version of v5 Pages. Quite different applications, as well as more recent Pages has lost about 100 features that were in its antecedent.

  Check if you have Pages ' 09 v4.3 in your Applications: iWork ' 09 file. If so, use it.

  Pages v5 requires that you select a shape, and then on the Image tab in the right panel, you choose Image, scale to fill fill, and then select your image for the background. You cannot select this image from the inside, but you can add text to the form that will appear on your image.