System help pleace disabled code 59795137

Similar Questions

• How to solve "System disabled Code 00291"

  HP Pavillion Zd8060USA Llaptop Pentiun 4 HT processor 3.2GHz

  P/N PR315UA #ABA

  S/N CNF5020QT1

  I had entered the password password BIOS enter in the box, then again in the confirmation box.  I stopped and restarted the system and entered the password.  The system would not take the password I just entered.

  I received the error code: "system disabled Code 00291".   I was not able to enter the system.  I released the 100 GB hard drive and replaced by another HD 160 GB that had the original MS Media Center Edition 2005 top and restarted the system.  I got the same error code.

  Please provide instructions on how to start the system.  The system doesn't have a floppy drive.  How can I get the system to set the boot order sequence to leave the cd rom drive and be the first boot device and then Player 8 GB flash as the second boot device, the hard disk as the third boot device?

  No other changes was to the prior agreement of the system to set up the BIOS or security password.

  I tried to password protect the system to prevent my young daughter to access.  She broke down 4 systems in which I had reload and configure each of them. Now, I fell it.

  Please help me! Send replies to [email protected]

  Hi John,.

  You must open a session an official request to support lines HP (phone/email), provide them with a proof of ownership of the product, authority letter and hash code global disable. the post, HP can give you another password that unlocks the BIOS and you can set the password again.

  It will be useful.

  Kind regards

  Waseem,

  I work for HP.

  * Click on the star of CONGRATULATIONS on the left say "thank you."
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• Compaq preserio cq57: System disabled code 65045889

  I'm either 32 or 64-bit but certainly 10 windows and my laptop was stolen I got it back but the system off with the code 65045889. Ask me for password 3 times then gives the code. Help!

  When you are prompted for the password try 70923209 this should clear the password.

• Compaq Presario CQ57: compaq Presario cq57 forgotten system password disabled code: 77564960

  Compaq Presario cq57 forgotten system password disabled code: 77564960

  At the password prompt, try 68442366

• HP 15-r210dx: System disabled code forgotten BIOS admin password

  I forgot the password for admin to access BIOS. System disable code is 77135872.  Never I would never forget with a mind like a steel trap but, lately, the trap of thinking was rust. Thank you!

  @shortcircut

  Enter 68893274

• j9h22ua: System disabled Code: 56953032

  My system has been disabled. The code is 56953032. Is there a way to reset this?

  @PPMILLC

  Enter 49631014

  Kind regards

  DP - K

• Hi I have the same problem that many system disable code is 86331623 on a hp paviliondv6-6135dx

  Hi I have the same problem that many system disable code is 86331623 on an hp pavilion dv6-6135dx

  @uprecious_58

  With this code it should automatically remove it.

  REO

• c6n76ua #aba: dv7 hp envy system disabled code 85764819...

  dv7 .hp want disabled code 85764819 system...

  Hello

  Enter: 30642239

  Kind regards

  DP - K

• HP pavilion dv7-1150us locked / disable Code

  Disable Code-65729445

  Help, please

  Try > 70681481

• I get system off with the code 68072590 after 3 failed attempts

  I get system off with the code 68072590 after 3 failed attempts

  AM trying.

  77950516

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  IF demand for CURRENT password using this code.

  REQUEST NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• my system restore is disabled, how do I turn it back on?

  my system restore is disabled, how do I turn it back on?

  This article should help you:

  "How to disable and enable the system restore in Windows XP"
    <>http://support.Microsoft.com/kb/310405 >

  HTH,
  JW

• An internal system component has disabled the hibernation. How can I solve this? __

  > I went through all the steps and not the powercfg h on and it says this:
  > hibernation failed with the following error: the request is not supported.
  >
  > The following preventing hibernation on this system.
  > one or more older drivers are installed:
  > VgaSave
  > An internal system component has disabled hibernation.

  I was told of pilots video what is the problem of the VGASave but I have the latest drivers.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  A Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 'ink system failure' error with code oxc19e0023 on a HP Photosmart Premium all-in-One Printer - C309

  'ink system failure' error with code oxc19e0023 on have a HP Photosmart Premium all-in - One Printer - C309g - did all resets and reinstall the ink also tried to replace ink with new carts HP... frustrated please help

  Have you tried the steps outlined in this article:
  http://support.HP.com/us-en/document/c03081973

  If not try the steps and tell us if it helps.

  Good luck!

• Your system administrator has disabled launching of the display settings control panel.

  I get the following message when I try to change the screen saver in the control panel:

  "Your system administrator has disabled launching of the display settings control panel."

  I am the administrator. My computer was before my husband, but he doesn't remember to disable anything until he gave it to me. What can I do to restore it?

  Please help, I deeply appreciate.

  Ah, sorry. Try this instead.

  Its a link to specific steps to solve this kind of problem.
  I hope this helps!

  http://social.technet.Microsoft.com/forums/en-us/itprovistaie/thread/58946fa0-80d7-4a5f-b9ac-16d3ca1587d7
  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help me disable ease of access.

  You have problems with programs

  • Help me disable ease of access on my acer 1557. I use Windows Vista Home Premium. It drives me crazy, I'm ready to destroy my computer and never buy another on or show me how to go back to the factory setting. Thank you.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Narrator:

  Click on start > go neglects Panel > accessibility > Ease of Access Center > explore all settings > use the computer without a display > untick the checkbox on Narrator byTurn > click Save.

  http://www.Vistax64.com/tutorials/124575-Narrator-turn-off.html

  Read the tutorial above re turning power switch of the Narrator.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  On the keyboard of the screen:

  Click Start > Control Panel > accessibility > ease of access Center > use the computer without a mouse or keyboard > uncheck use on-screen keyboard > click Save.

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  Read the info in the tutorial above re turn the on / off of the keyboard on the screen.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Magnifying glass:

  Click Start > go to control panel > accessibility > Ease of Access Center > make computer easier to see > now uncheck turn on Magnifier > Finally, click on apply.

  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  Read the tutorial above re turning Magnifier on / off.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  You have to press F10 or F11, Acer is normally Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  See you soon.

  Mick Murphy - Microsoft partner