Table in the MML markup

Similar Questions

• By the numbers, how do the list tables on the side?

  By the numbers, how do the list tables on the side? It used to be on the side, now it is on the top which is a huge pain.

  This changed in the transition from Numbers2.x too 3.x.

  Unless you explicitly removed numbers 2.x, it is always installed and usable on your computer.  You can locate it in the folder "/ Applications/iWork ' 09.

  You should be aware, that numbers 2.x cannot open files saved numbers 3.x - you can export files from Numers3.x back to Numbers2.x by using the item of menu numbers 3.x "file > export to > number ' 09»

• expand the category drop-down list table in the model of checkbook

  Using version 2.3 of numbers 09.  Try to understand the model section for checkbook and to expand the available categories in the menu drop-down allows to assign a category to an entry in the checkbook.  Where would we go to learn this procedure.

  Hi Robert,.

  This is as good one place as any.

  If you have started using the model and have defined categories for all operations, make changes to the cells in these rows. Fill the pop-up menu edited cells wil also reset the value of each cell filled to the currently selected value in the source cell to this filling.

  Add new categories to a cell in the context menu

  In the Transactions table, click any cell to the row and column reference tabs appear.

  Line control grip (red arrow in the image below) and drag to the bottom to add a new line. The new line will contain a new copy of the cell from the popup menu in the category column. Click this cell to select it.

  In the bar of buttons above the workspace, click the Inspector button to open the Inspector, and then click the format cell [42] button to go to the cell format Inspector.

  You will see the list of the menu items for the selected cell. The list below are a pair of buttons marked + and - (blue arrow). To add a new item to the menu, click on the button +.

  

  The new item appears at the bottom it has the list, with its highlighted text as shown. Type the new category name.

  Repeat for as many new features that you need.

  You can also edit the items already in the list.

  Double-click an existing item to select the text. Type the new name for the item.

  When you are finished, close the Inspector.

  The menu changes are applied immediately and affect only the menu in the modified cell, and cells, this version of the menu is filled in. If you add a new line to the bottom of the table, for example, the edition menu of line 15 will be filled in the new line.

  Add a new category to the account categories table

  The new category is not automatically added to the category table account. When you add it, ensure that there is an exact match between the label of the table and the category in the menu.

  Click any cell in the account categories table to select it.

  Enter the line control handle and drag down to add as many lines as necessary.

  Note that the totals in a footer line moves down and the new lines are added above it.

  Fill in the new lines of the new category (or categories). *

  If you have completed transactions for these categories, these will be totaled in the B column and adds the total in the footer line, but not yet appear on the pie chart.

  

  Add the new categories on the pie chart

  Click the pie chart to select it and show its data source.

  

  Data for the graph comes from the cells defined by the selection (in blue) rectangle. The cells shown in white on a background come from the chart legend labels black in column A of the table in the colors of the wedge can be seen in the box beside the category name (and can be changed by clicking on the box, and then choosing a new color in the fill color in the toolbar).

  To add the new category to the table, place the mouse pointer on the small handful (circle in the lower right corner of the selection rectangle. When the pointer changes into a Black plus sign, click and drag down to lock the new categories, which will be instantly assigned a color and added to the graph.

  Click anywhere outside the objects onscreen to deselect all objects, and then save your work.

  * To ensure matched spelling between the menus and the list of categories, select one of the new cells of menu and copy. Select one (or all) cells new category on the table of the types of accounts and paste. Specify each menu to the new categories, and then select all the cells in the new category. In the format of cell Inspector, use the context menu to change the format of these cells to the text. This removes the attribute from popup menu of the cells, leave the text as it was when the last value.

  Kind regards

  Barry

• How to create a second table containing the first?

  I have a table with data source. I would like to create a second table that feeds these data. I will use the second table for the filtered views, etc. I am currently copying a range of cells through, referring to table 1. However, if a new line is added to table 1, it does not table 2. How can I configure things so that any changes - including the new lines/columns would be automatically carried over to table 2?

  Table 2 cannot automatically grow the new rows or columns. If you want it to be completely 'automatic', your second table must be as large or larger than your first picture will be never. In other words, there need to additional rows and columns to allow growth. If is not bigger than 1 table, when you add rows or columns to the table 1, you must also manually add rows or columns to the table 2.  The problem is that all these lines/additional columns in table 2 will have formulas that are referred to non-existent rows/columns in table 1, which is a mistake. What you do next depends on what you do with table 2. If it is just for display of data and your existing formulas are all as = 1::A1 Table, you can change to = SIERREUR (array 1::A1, "") to get rid of the errors.  To hide all blank lines, you can set up a filter to show only the rows where column A is not a space (for example) character. There is no filter to hide additional columns, however.

• create containers in the table of the container in the locals or file globals in teststand through Labview

  Hello

  I'm trying create table containers and in different containers, which contains items with different values.

  For that I use for example Excel file and in it, I create a single table, first line is the element name and second row is the value of the element and even to the third row is also different values.

  I want to create under container in the tables of the container as first line must be the element and the second row's value and after reading the second row his creates the new container because again first row must be the element and third row should be the value of the elements and even for the next row.

  here as an attachment, I tried to do, but how I am not able to create one any container according to the line changes. Please guide me how to solve this problem

  Thank you much in advance.

  Kind regards

  Ankit.

  No, I have not found the right solution for it.

  I posted this in wrong thred, I wanted to just delet this post. but in some way, I have not found where delet.

  That's why I just mark it as resolved, if it is no more worth.

  But in any case here as an attachment it is vi, which is at least capable of create table containers in teststand.

  what I want is to create the table container, and teststand with subcontainers.

  Agin thanks for any help.

• How to add channels to a channel table in the display panel in the script

  Hi all

  We try to put in place a review tool video using DIAdem, and we want to fill the results which have already been analysed in a Panel. This means populating a channel table in this Panel with the necessary data, but we cannot find a way to add strings to a table in the script. It seems that it should be very simple, but we can not find!

  Thank you

  Peter

  Hi Peter,.

  Yes, it's simple. You prepare your VIEW with the channel table layout and use the add on the columns collection method.

  The command might look like this:

  VIEW. Sheets (1). Areas (1). DisplayObj.Columns.Add("myGroup/myChannel")

• How to remove columns from the table on the master 1-0?

  I have an array of 96 columns with strings. I also have the array of int 96-elemets (mask) with 1 and 0.

  What I want to do is to is to remove (or hide - but I read that it is not possible) all the columns with index corresponding to 0 in the mask table.

  example:

  columns in the table

  1 2 3 4 5

  mask

  0 1 0 0 1

  I want to remove the columns 1, 3 and 4 and leave only 2 and 5 in my table.

  How can I do?

  If I create loop for with i as the index of the column, when I do DeleteTableColumns() columns number decreases, and I get an error of range out of

  Or do I have an option to hide the unnecessary columns (not set their width to 1, it's very ugly-looking)?

  Please help me (())

  Hello rovnyart!

  1. removal of columns in the table:

  I suspect that the reason why you get the out-of-range error is due to fact that in your loop, you delete the columns in the table, you'll eventually end up by referring to a column that no longer exists, because the other columns before it have been deleted. While you remove each column of your table in the loop for example, the column index number will move, because you deleted the other columns in front of her.

  To resolve this, even if you delete a column in your loop, make sure that you take also into account that the index of the column is moved because of the removed columns.

  2 hide columns in table:

  You can use the ATTR_COLUMN_VISIBLE attribute to hide columns in the table:

  http://forums.NI.com/T5/LabWindows-CVI-idea-exchange/add-attr-column-visible-attribute-for-table-Col...

  http://zone.NI.com/reference/en-XX/help/370051Y-01/CVI/uiref/cviattrcolumnvisible_column/

  3 alternatives:

  Note that another alternative would also use a tree instead, control as the tree control also supports the hidable columns:

  http://forums.NI.com/T5/LabWindows-CVI/table-hide-column/TD-p/569773

  Best regards!

  -Johannes

• At all indexes on tables of the same value in the structure of the event

  Hello

  I have a panel with the four bays and I use a structure of the event.

  Now, I want that change of the index of array_1 also affects the index of 3 other tables at the same index.

  But there is only a property "value Exchange" and no property 'index-change' in the properties of the table.

  So I read the 'index' property and write in the other table.

  But: It seems as if I have to do so within the period of waiting-section of the structure of the event.

  Is there another way to do this?

  Thanks for help

  You can use the mouse event on each table to detec the event (of course, that will attract not only a change of index, but I don't think you care too) and then use the 'values of the indices' property on all the table to set.

  See annex VI (LV2012), hope this helps

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• How to print got string in buffer in a table at the front end?

  Hello. I want to print the string obtained in buffer in a table opposite end. I play serial with a machine, where I'm supposed to place an order to get the answer. The machine I'm trying to communicate has 6 cylinders, when I pass command 'b', it sends the values of the bottles as a string. Example: when 'b' is passed, I get "b 50.8 54.8 60.2 65.3 57.0 61.6" in buffer. I want to put these values in a table at the front end. Can you please give a tip / solution to my problem? I have attatched the vi. Thank you.

  Hi Madara77,

  Table is an array of shots, first think about how you can get the array from the string above,

  Here you need to parse the string correctly, for the string "b 50.8 54.8 60.2 65.3 57.0 61.6"

  1. remove the space first and the last, removal of b , (use the subset of the string function ( )

  2. now you have ' 50.8 54.8 60.2 65.3 57.0 61.6.

  3. now try to get the table on top of the string based on usage worksheet of array of strings

  (a) use the delimiter as space constant.

  Table 2D b) array type as a string

  Now, just wire this scoreboard table.

  It will be useful.

• Replace a table in the table of cluster! Possible?

  Hello

  I had a problem with the insertion of a table that I acquired from an another vi in the existing table in the cluster. My big table contains a set of 5 elements (name, value, save, current and position.) I want to connect my slot vi, whose output is a table of the number, in vi main by replacing only the values in the main draw. All values in the main draw are acquired from sub vi but the rest of the data remains the same. I also want my main table to look the same too, except the values have changed. I know this sounds simple enough, but I don't really know.

  Thanks in advance

  I guess that you need something like that. This will replace the values present in the main table with the values obtained from the Sub vi.

  

  Good luck

• kindly tell how to use the unique value of a table with the index 0

  kindly tell how to use the unique value of a table with the index 0

  Hi
  
   
  
  Yep, use Index Array as Gerd says. Also, using the context help ( + h) and looking through the array palette will help you get an understanding of what each VI does.
  
   
  
  This is fundamental LabVIEW stuff, perhaps you'd be better spending some time going through the basics.
  
   
  
  -CC
  

• Insert one table at the end of another...

  Hello, I have spent half a day to effectively solve this simple problem, but in vain... Perhaps you can point to the right direction...

  I have for loop that generates two tables... Each contains usually two or three hundred items... I want to paste these tables to gather in a 2D table long as shown on the attached figure.

  Like this? (assuming that the two small tables have the same length).

  

• Writing table to the selected line in the table table

  Hello

  im stuck on trying to display a line of data that I took from an excel file.

  display just the data on an array of table has no problem, BUT when I use the Index table and Replace the function subset of table, no data out.

  so, Table3 has the data I want but Table2 have no data at all.

  IM using the Index table and the function Replace subset of table to allow me to SELECT the LINE I want to be shown on

  any idea?

  

  Hey!

  Try this...

  I use the array function to remodel to change the extracted Excel from 2D to 1 d. Then you can replace all right in your table.

  -Rkll

• The doc for the function of the subset of the table shows the extensible function

  In LabView 2010 the doc for the function of the subset of the table shows that the function is expandable with indexes and multiple lengths. I can't expand the function for multiple indexes. How can I do this?

  Is the documentation for the function by mistake, or is there another function of a subset of the table somewhere that can do this?

  Subset of table details

  When wire you an array to the function, the function is automatically resized to display entries index for each dimension of the array. If wire you a table 1 d to the function, the function displays the index for an item entries. If wire you a 2D to function, the function table displays the entries index for a line and column, respectively. If wire you a 3D through the nD to the function, the function displays the index for a page entries.