Table of channel adds channel list «»
Hello
I did apply for a measure of frequency via a HP34970A.
Closed HP34970A 101--> HP5313 port measures--> and then HP34970A open port 101 again. Continue to port 102.
I want to use #101 & #102 but # "" is added as well and gives me a timeout 50sec.
The probe for a list of the input channels watch 101, 102 & «»
On the output, it gives me
#101 5 bed, 8ms
#102 bed 1, 6ms
# "" bed 0,0000000
How can I remove ' ' from the list of channels? I don't know that it is not in the list itself, only 2 channels there.
Thank you
Hello again
I ended up remove the entry from the chain and recreate. There wasn't any 'spaces' or anything in the figure of an i, but recreate fixed.
Thanks for the comments.
Tags: NI Software
Similar Questions
-
I use Keithley 2750 DMM to the measures. The device is connected to the computer via the GPIB connection. 7700 two multiplexers are connected to the keithley.
My goal is to get the 4-wire resistance meter in a continuous or intermittent according to a reading of proximity to Labview 8.5 programminghelp. From Keithley 2750 project Style Labview Driver, I had the "continous multi read.vi". But here's the list of 101 to 110 channels, that is to say only 10.
Since uses two 7700 multiplexers, I can get a maximum of 20 values of resistance in trigger.
So What does take to read 20 resistance readings?
Fits the channel list be changed? If Yes to what?
Is there an separate for each 7700 multiplexer address present in the two slots?
I enclose the present common to all 2700, 2750 etc. vi that can measure up to only 10 readings in a single roll.
Don't answer.
Thanks in advance
Concerning
grugh
Hi grugh,
Looking at the context help, I believe that you do not want to 101:110, 201:210
I hope this helps!
-
Original title: Loss of registration
No apparent reason, I lost some of the channel list, significantly Channel 5 and Film 4 and a lot of other minor channels. Does anyone know why this is and how to fix it? I already tried "Get latest Guide listings" several times without success.
Hi Bryan,.
Sorry for the late reply. I suggest you consult the solutions provided by Nithyananda in the link below.
If the problem persists please answer us with the State of the question so that we can help you. -
How to get other channels in the channel list.
Hi experts,
How to get other channels in the channel list.
for example
"Country1, Italy countries2, India, countries3, paris, countries4, scottland, Canada5, rome"
in the list above, I need to get all the countries and their names separately.
as countries1, countries2, countries3 countries4 Canada5
India, paris, Scotland, Italy, rome
I try the one above in the fashion below
SELECT SUBSTR
("Country1, Italy, countries2, India, countries3, paris, countries4, scottland, Canada5, rome,
1,
INSTR
("Country1, Italy, countries2, India, countries3, paris, countries4, scottland, Canada5, rome,
',',
1,
1
)
-1
)
OF THE DOUBLE
everything please help me
If you want the data to be more structured and useful:
Column collar for a20
Col col_value to a20inlist var VARCHAR2 (2000)
exec: inlist: = 'Country1, Italy, countries2, India, countries3, paris, countries4, scottland, Canada5, rome;
exec: inlist: = replace (: inlist,' ')Select max (decode (mod(lvl,2), 1, value)) Column
, max (decode (mod(lvl,2), 0, value)) col_value
from (select substr (: InList, + 1 start_pos, end_pos-start_pos-1) value)
lvl
from (select: InList)
case when level = 1 then
0
on the other
InStr(:InList,',',1,Level-1)
end start_pos
case when instr(:InList,',',1,level) = 0
then length(:InList) + 1
on the other
InStr(:InList,',',1,Level)
end end_pos
level lvl
of the double
connect by level<>
)
)
ceil(lvl/2) group
order by 1;
COLUMN COL_VALUE
____________________ ____________________
Country1 Italy
countries2 India
countries3 paris
Scottland countries4
country5 romeNot tested on 10g
Then you could stragg lines together...
-
How to remove a program that is not in the Add/Remove list of
I deleted an add/remove program of & thought later that I had removed that badly. . I restored it from the trash, but it is not in the Add/Remove list.
Through 'search' I found but don't know where it is.in my files was my original action of removing correct & now I want to remove again but cannot find a way to get it uninstalled. Hope you can help thank you GormaurYou can use Revo Uninstaller to remove an installed program are not not in the control panel.
Revo Uninstaller - follow the link and download the free version:
http://www.revouninstaller.com/revo_uninstaller_free_download.html
I deleted an add/remove program of & thought later that I had removed that badly. . I restored it from the Recycle Bin
When you uninstall a program via Add/Remove Programs, it will not in the trash.
-
How to manually remove items in the Add/REMOVE list
I uninstalled a particular program, but it still appears in the Add/REMOVE list. It is still also in the folder programs. How can I manually remove this program in the Add/REMOVE list?
Hi Sweetpence51,
1. are you able to uninstall properly the other programs on the computer?
2. you use Windows vista or Windows XP operating system?
Method 1
First of all, make sure that you have followed the right instructions to remove the program from the computer.
If the program does not uninstall completely the first time, sometimes running the uninstall program a second time will succeed.
Troubleshoot installing or uninstalling programs
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs
Method 2
If you are unable to remove the program from the Add/Remove programs then you need to remove the keys associated with the program from the registry.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Note: In the procedure below, replace Add/Remove programs and features if you are using the Windows vista operating system.
(a) click Start and in the search box, type regedt32, and then click OK.
(b) in the registry editor, find the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall
(c) in the left pane, click the Uninstall registry key, and then click export on the file menu.
(d) in the export registry file dialog box that appears, click desktop in the list record in , type Uninstall in the file name box, and then click Save.
(e) each key listed under Uninstall in the left pane of Registry Editor represents a program that is displayed in the list of currently installed programs in the add tool / remove programs. To determine which program that represents each key, click the key and discovers the following values in the details on the right pane:
DisplayName: Data of the value of the DisplayName key is the name listed in Add / Remove programs.
- and -
UninstallString: The value of the UninstallString key data the program used to uninstall the program.(f) after you identify the registry key that represents the program that you removed but which is still displayed in the list of currently installed programs , add or remove programs, right-click the key in the left pane of the registry editor window, and then clickRemove.
(g) click Yes in response to the message "are you sure you want to delete this key and all of its subkeys?
(h) on the file menu, click Exit to quit the registry editor.
(i) click Start, click Control Panel, and then click on Add / Remove Programs.
In the currently installed programs list, verify that the program whose registry key you deleted is no longer listed.(j) do one of the following:
1. If the program list is not correct in Add / Remove Programs, double-click the file Uninstall.reg that you saved on your desktop in step 5 to restore the original list of programs in the registry.
-or-2. If the program list is correct in Add / Remove Programs, right-click the Uninstall.reg file on your desktop and then click Remove.
How to manually remove programs from the add tool / remove programs
http://support.Microsoft.com/kb/314481
Note: The preceding Microsoft article also applies to Windows vista operating systems.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How to add a list of users of Blackberry Messenger using Java?
Hi all
Do I want to, a Midlet Application to add a list of users to BB Messenger PIN or email. Is it possible using the Blackberry API?
If this is the case, could you please send me links or any other useful animals...
or
Is it possible to send contacts from this using BES BlackBerry BB Messenger?
Thank you
There is no API BlackBerry that allow you to add contacts to BlackBerry Messenger.
-
How to import a table from a drop down list?
I am very new to ColdFusion and learn things I want. I wonder how to import a table from a drop-down list. I created the table and the drop-down list but cannot make it work properly. I would like to see a small example.
Please help thanks...
Here is a very simplistic example. Please research each tag in the documentation to see how they can be used:
ArrayNew (1) > Sorry for formatting issues.
See you soon
Eddie
-
How to add the list to weed to pdf
Hello
In my code, I have a list of map of attachment and a pdf document. At runtime, I want to add this list of attachments to the pdf document. Please let me know what process or the api is available to do so.
I want to make the pdf to the browser of the client with an attachment.
Concerning
Sunil
Hi, I found the solution
the renderpdf process to add map of accessories. its nd of input parameter is not required can be taken along other input parameters.
There are also different APIs
like renderpdf, renderformhtmletc.
concerning
Sunil Gupta
-
TOSHIBA 32AV933G loses control of channel list
Hi, I bought this TV 3 months ago and I have a problem with SORTING CHANNEL function.
After reorganization channel as a result of my personal list (I use the same order with all my TV) the av933g has lost the order without apparent reason, forcing me to reorganize all the channels every time.
The order is usually 4 to 5 days before scramble
I installed the latest firmware but the rest of the problem
Hello
In my opinion, you should contact Toshiba service to verify your TV.
As much as I know there not many options that could enhance or fix this problem.
You can try to reset the TV and could update the firmware, but it's what you could do. Everything must be done by the technician. -
Toshiba 32EL933 - DVB - T channel list is not sorted in hotel mode
Hello
I have over 100 of these TVs, and I have problem with hotel mode.
I use USB drive and one TV (find paths and creating a new list of channels sorted, with my order), and then I use usb for programming other TV sets. And I have no problems with that...
But after a few hours/days, my list of created channel becomes not sorted. Without reason. I all schedule them again! We use the DVB - T signal. Poland in the country. And this problem does not appear on the 3 other TVs (not TOSHIBA)
Help, please
Sorry for my bad English
Chris
Hello
I read in a different thread that the activation of the option + "Control Panel lock" + menu would solve the problem with the chains unsorted.
Not sure if this would help you but it s worth a try.
-
Hello
is it possible to record the properties of the string selected in a channel table (view)?
Thank you
Yes,
If you customize your table and save the layout, you have the same settings at the beginning / the next load of this page layout file.
Kind regards
Philipp K.
AE | OR Germany
-
Rotate several tables of channels 1 d
Hello
I have a vi that eventually writes some data to a log (.txt) file. In the data that are written, there are a few tables. In a particular section, I have three arrays of strings that I try to handle it with no luck. Here is an example of what I have now, and subsequently, where I want to be:
Present:
x 1
x 2
x 3
Y1
Y2
Y3
Z1
Z2
Z3
Desire:
x 1 y1 z1
x 2 y2 z2
x 3 y3 z3
Where x, y and z represent the three tables of sepreate channels. These tables is then concatenated with other data to generate the log file. It seems that no matter what I do (build, transpose, index, etc...) I still end up with the vertical arrangement in my log file - I'm sure I'm overlokking something trivial, but it's deceiving me right now.
I cannot post my code because of security, but will provide any more detais needed. Thanks in advance.
I think you are looking to do a table build followed by a transposition.
Your build array must have 3 entries.
Feed it to X, Y and Z and you should get
x 1, x 2, x 3
Y1, y2, y3
Z1, z2, z3
Hit this result with the conversion and you should get
x 1 y1 z1
x 2 y2 z2
x 3 y3 z3
What do you use to write to the log file?
-
Devantech TPA81 read temperature table "physical channel be unspecified.
Hi, I'm new to Labview.
I need to use a heat of TPA81 sensor in my Dani robot project, so I found the 'Devantech TPA81 reading temperature table' example in examples of robotics. I connect my sensor with a USB - I2C converter and then connected to my PC. I run the program, but the problem "the physical channel is not specified" still exists. How to choose the physical channel in labview for the clock channel and the data channel?
Could someone please help me and thank you in advance.
Jason
Hello.
The example given here "Matrix of the temperature read Devantech TPA81", works with acquisition cards supported by the driver "DAQmx" therefore, I think that this will not work with a simple "USB - I2C" converter.
Now, on the other hand, if you just want to work with the "TPA81" sensor in the robot, DANI, you could see the example "Devantech TPA81 (FPGA). Lvprog' in the help of LabVIEW, where, in the "target FPGA", you will find the VI "Devantech TPA81 (FPGA). saw', where you can configure the channels (data and clock). -
How can I get the Windows 7 Media Center guide to update the channel list.
I noticed that lists of TV channels in Windows 7 Media Center guide are incomplete. Not all available channels are appearing. They disappeared for some time. I checked the lists online of zapsit and they contain the missing strings. The program zap2it descriptions are more precise than what appears in the Media Center guide.How can I get the added missing channels?Keep us on that.Please also post the questions toand do not forget to mention the Colossus when you post experts.BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question
Maybe you are looking for
-
Satellite Pro L650-1LP - changing language in the OS Win 7
Hello I have a Toschiba Satellite Pro L650-1LP with the Polish version of preinstalled Windows7. I want to have an English version. I understand that I must make a recovery disk and that re - install the system by choosing the language English, but I
-
Hi there, hope someone can help me with this: My son (10yo) has an iPod Touch - he had for a time signed in my wife iCloud account (so that actually, she sees and OKs all the apps he wants to put on there etc. We would like for him to have his own ac
-
I replaced Vista with a new version of windows 7 64-bit and cannot get my HP Photosmart B109 all-in-one a - m at the end of the installation I downloaded from the HP site. I uninstalled this printer as suggested before attempting the download. He get
-
Live Family Safety Service Windows causes my Vista computer to hang at startup
My computer hangs at startup / commissioning for about 5 min. This happens only to start initial and not when the disconnection / log - on different users, only the initial start-up of the machine. Event Viewer identifies the above error. How can
-
Service of TRACKING module cannot session in?
I installed 1.0 CUE as a NM in a 3745 once I try the module service-engine service session 4/0 Try 192.168.6.1, 2129... Connection refused by remote host % I used to be able to do it and now I can't? Are there commands I can use to see why she refuse