Table of contents does not work correctly. Help!

Similar Questions

• Restore to factory content does not work correctly

  Help, please!

  I had a 'Blue Screen of Death' on my T42. I decided to use the button "Access IBM" and to "restore the contents of the factory.

  However, once I did this, different devices (listed in the Device Manager) were not working properly. The its (SoundMax) did not work at all (no sound from the computer). The INTEL 2200BG wireless network card does not work. I even installed the driver (downloaded on the IBM Web site) and install the driver. Then the noise started working (but the volume buttons on the keyboard do not always work.) I have a little trouble getting all the devices to work.

  I had restored the contents of factory once before, and I don't remember the devices does not. Shouldn't this operation set all devices to work correctly?

  OK, I solved my problem.

  It turns out that the procedure to "Restore the content of the plant" is not complete. A lot of the never executed restore procedure and so many devices were missing (and many pre-installed software).

  I don't know why this happened, but my best guess is that I have accidentally hit the "ESC" key or something like that and who may have quit the restore process.

• Table of contents does not work - it does not show the unique points

  Hey, I'm lost - I work as a designer of book and it's on the 2000th book I did with indesign - and suddenly - this is a update new version problem or I'm suddenly stupid? -It seems no longer works...

  problem: I have two formats for the titles, both are used correctly in the entire document. I add in the table of contents, give them their own formats and so on... and when I genereate the thing, nothing. no points, no page numbers only, only the head... and there is also

  No any hidden text, it simply does not create this shit

  Excuse my language, I tried for two days now...

  I add a screenshot, maybe I'm completely blind? can someone help me?

  

  Thank you! I solved it just... it was missing a link in the pages of text (sorry, I don't know the English terms for this) and after I plugged - VOILA! Two days of lost, but a new experience...

• Table of contents does not work

  InDesign cs6, windows XP

  I have a book created with 16 documents (so far). I tried to create a Table of contents (TOC); He's not well.

  In the document that I put to the table of contents (in the book), the OCD side is open after the chapters of books have been digitized. I selected the paragraph Styles to include in the table of contents of the list of styles, discovered in the documents. I selected OK. I got the text icon. I placed the TOC and... nothing. (Finally, I got the title of "Content"). I expected a little more.

  What Miss me?

  http://help.Adobe.com/en_US/InDesign/CS/using/WS49FB9AF6-38AB-42fb-B056-8DACE18DDF63a.html

  I think you need to follow the steps with a lot of attention.

• My MOMENTUM PS/2 port touchpad touchpad does not work correctly.

  I'm using acer aspire laptop v3. My MOMENTUM PS/2 port touchpad touchpad does not work correctly. It stops working sometimes and automatically return to the action after a while. When he stops working, pointer can be moved but just click, left click, scroll etc. do not work... Help, please...

  Hi Anoop,

  This problem may occur because of incompatible or corrupted touchpad drivers. I suggest you to uninstall and reinstall the drivers and see if it helps.

  To uninstall the device drivers, follow these steps:

  a. drag the mouse down to the left and right click on the Start icon.

  b. Select Device Manager.

  c. right-click on the device driver, and then click Uninstall.

  Check out the link to install the drivers:

  http://www.Acer.co.in/AC/en/in/content/drivers

  It will be useful. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• My Phlinxtogo game does not work correctly

  Original title: "C:\Program Files (x 86) \Pogo Games\Phlinx Go\PhlinxToGo.exe" __My Phlinxtogo game does not work correctly ".

  \Pogo Games\Phlinx to Go\PhlinxToGo.exe

  Hello
   
  1. what operating system is installed on your computer?
  2. What is the exact error message you get?
  3. what happens when you try to run the game?
  4. has been the work of game much earlier?
   
  There is currently no information on the compatibility of Phlinxtogo with Windows 7.
   
  However, you can perform two or three steps and check if it helps.
   
  Step 1:
   
  Once the Phlinxtogo game is downloaded, right click on the .exe file and run as administrator.
   
  Step 2:
   
  If this does not help, run the game in Windows compatibility mode and check.
   
  If none of the suggestions work, I'm afraid you must contact the manufacturer of game for a better support.
  
  Aziz Nadeem - Microsoft

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Poloroid MP3 does not work correctly.

  Original title: connect a MP3 player to the poloroid mp3 files

  Sorry for the caps, my problem is I just got a Poloroid MP3 and it does not work correctly as no movement between the icons etc. Y at - it anykelp like a download or something I can put it on its feet again. Thank you very much

  Gary lumbard... e-mail * address email is removed from the privacy *.
  

  Hi Gary lumbard,.

  Thanks for posting your question in the Microsoft Community Forum.

  According to the information of Polaroid MP3 player does not work on your Windows XP computer.

  Since you are faced with the question with player MP3 of Polaroid, you can get in touch with ato Polaroid supported if verification updates is available for the player and for further assistance.

  Polaroid support

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• spell check does not work correctly. It highlights each word

  my spell checker does not work correctly. When I send a message it highlightes, virtually every word and all are spelled corectly - help please

  You use Outlook Express when you see this? Office Word 2007 or 2010 is installed?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The side-by-side function does not work correctly, windows overlap

  original title: sizing windows side-by-side

  The side-by-side function does not work correctly, windows overlap.  How do fix you this feature?

  Hello

  It is Aero Snap.  When you select a window how you "cutting" it in position?  You do not use the window key and the arrow left/right or are you drag / drop window?  If you drag / drop, using the keyboard shortcuts help to solve the problem?

  Kind regards
  Alex T.
  ~ 2007-2011 MVP Windows desktop experience ~

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows media Center does not work correctly.

  * Original title: Windows Media Center

  Downloaded 10 hated windows he returned to windows 7

  Now, windows media Center does not work correctly. Very slow to do anything whatsoever at all, let alone play music

  Any suggestions please

  Try to uninstall, reboot, reinstall, restart WMC according to the http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/ article is for WMPlayer but just to check the entry of WMCentre instead.

  If that doesn't help, try a SFC/scannow and see if it detects and corrects something - https://support.microsoft.com/en-us/kb/929833

• I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly.

  I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes.  Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?

  The last thing you want to do is install and run any third tuneup/Optimizer program.

  In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.

• Microsoft Teredo Tunneling adapter does not work correctly and my pc works too slowly to start and stop.

  Original title: hardware device

  Please help me...

  My Microsoft Teredo Tunneling adapter does not work correctly... I tried to reinstall it but it is impossible to install...

  So what to do so adpter may work correctly...

  And my pc runs too slowly (at startup and shutdown also)

  Help help me soon...

  Thank you...

  Hi Harshhh36,

  Usually, after the computer restarts, the drivers install automatically and it will stop the errors.

  You can also refer to the computer or the network card manufacturer's Web site to download and install the latest version of the drivers for the network card.

  You can also check in the updates of windows updates available for the network adapter driver.

  For more information, see the article:

  Automatically get recommended drivers and updates for your hardware