Table return more on iPhone

This is not very well on Andnroid but not on iPhone, where it spills outside the viewport:

http://www.aptcoweb.com/dev/VIP/reservations.htm#RateTable

It is defined as the width of 80%, do I need anything else?

It's one of the problems with sensitive layouts in tables. They correspond to content & not enough on resizing smaller devices. I try to avoid the use of tables in RWD.

Nancy O.

Tags: Dreamweaver

Similar Questions

A row of Sub query returns more than 1 row!
I'm trying to update the values in one table from another table and get the error: void line query returns More Than 1 row.

I want to PRV_NAME B chart updated in the table A PRV_NAME where A.PRVID = B.PRVID where B.PRV_TYPE = M"

The two paintings were all unique PRVID, however, table B has PRVID that have the same name. So the data in table B can look like this:

PRVID PRV_NAME
1234 PHOENIX MED
1235 MED BAG
1236 MED BAG
1237 OVERLAND
etc...

So, as you can see are the unique PRVID, but not the PRV_NAME. Is this the reason why I get this error?

I do not build the tables and have no control over what is put in them. If this is the reason for the error, is there a way to fix this?

For reference, here's the request. Maybe there's something wrong with that?

Update msb_prv_source ps
Set ps.prv_name =

(select prv00.prv00_prv_name
of prv00_prv prv00
Join msb_prv_source ps
On prv00.prv00_prv_id = ps.prvid
where prv00.prv00_prv_type = am')

Published by: user12296489 on April 19, 2013 10:46
```
/* Formatted on 4/19/2013 2:00:43 PM (QP5 v5.185.11230.41888) */
MERGE INTO msb_prv_source a
     USING (SELECT *
              FROM prv00_prv
             WHERE prv00_prv_type = 'M') b
        ON (a.prv00_prv_id = b.prvi)
WHEN MATCHED
THEN
   UPDATE SET a.prv_name = prv00_prv_name
```

Error ORA-01422 apex: exact fetch returns more than the required number of line
Hi people,

Apex 4.1
I have a page that works like a charm.

Based on my application I need I have to perform the same operation for the different regions. As a quick and better method, I copied the page and branched, it inspires tab for this region.

The problem is that the original page works fine.
I haven't changed anything except the parent set to this copied page tab and works that I find with the above error.

It allows me to make the first entry on this page, but when I try to access the page again it gives me this error.

The error in detail is as below:

is_internal_error: false
ora_sqlcode:-1422
ora_sqlerrm: ORA-01422: exact fetch returns more than number of lines
Component.type: APEX_APPLICATION_PAGE_PROCESS
Component.ID: 214936714355373108
Component.Name: EMP_LEAVE_INFO line
error_backtrace:
ORA-06512: at line 1
ORA-06512: at "SYS." DBMS_SYS_SQL", line 1926
ORA-06512: at "SYS." WWV_DBMS_SQL', line 973
ORA-06512: at "SYS." WWV_DBMS_SQL', line 999
ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 806
ORA-06512: at "APEX_040200.WWV_FLOW_DML", line 336
ORA-06512: at "APEX_040200.WWV_FLOW_PROCESS", line 332
>
As a quick and better method, I copied the page and branched, it inspires tab for this region.
>

Copy paste is never advisable. It can be fast in some cases, there is an anti-pattern.

Be aware that the automatic extraction of the APEX line is based on a component of demand.

It is possible that your automatic rowfetch is based on the element of your previous page. If you for example to change the name of the table, but do not change the reference is the primary key value, then you can pass a value to your table that was not unique. This would result in ORA-01422.

Find the value of the session element and run your query.

Concerning

Nico

Error - ORA-01422: exact fetch returns more than number of lines
Hello

I get the error when running script below. Please help me.

/****************** ERROR ******************/

Error report:
ORA-01422: exact fetch returns more than number of lines
ORA-06512: at line 71
01422 00000 - "exact fetch returns more than number of lines."
* Cause: Exact extraction specified number is less than the returned rows.
* Action: Rewrite the query or change the number of rows requested

/****************** SCRIPT ******************/

DECLARE

l_xml XMLTYPE: = XMLTYPE ("< LoggingInformation >
< commandeEmplacement >
< name > ServiceCall1 < / name >
< StartTime > 2010-01-18T 11: 11:41.570664 - 00:00 < / StartTime >
< EndTime > 2010-01-18T 11: 11:43.8987741 - 00:00 < / EndTime >
< ElapsedTime > 00:00:02.3281101 < / ElapsedTime >
< status > completed < / status >
< ExceptionMessage > error here... < / ExceptionMessage >
< ExceptionStackTrace > Stack Trace here... < / ExceptionStackTrace >
< ServiceLoggingEntries >
< item >
< foo > 1 < / foo >
< / ServiceInformation >
< item >
< foo > 2 < / foo >
< / ServiceInformation >
< / ServiceLoggingEntries >
< InformationLoggingEntries >
< ProcessInformation >
< bar > 1 < / >
< / ProcessInformation >
< ProcessInformation >
< bar > 2 < / >
< / ProcessInformation >
< / InformationLoggingEntries >

< / commandeEmplacement >
< commandeEmplacement >
< name > ServiceCall2 < / name >
< StartTime > 2010-01-18T 11: 11:41.570664 - 00:00 < / StartTime >
< EndTime > 2010-01-18T 11: 11:43.8987741 - 00:00 < / EndTime >
< ElapsedTime > 00:00:02.3281101 < / ElapsedTime >
< status > completed < / status >
< ExceptionMessage > error here... < / ExceptionMessage >
< ExceptionStackTrace > Stack Trace here... < / ExceptionStackTrace >
< ServiceLoggingEntries >
< item >
< foo > 3 < / foo >
< / ServiceInformation >
< item >
< foo > 4 < / foo >
< / ServiceInformation >
< / ServiceLoggingEntries >
< InformationLoggingEntries >
< ProcessInformation >
< bar > 3 < / >
< / ProcessInformation >
< ProcessInformation >
< bar > < / > 4
< / ProcessInformation >
< / InformationLoggingEntries >
< / commandeEmplacement >

< commandeEmplacement >
< name > ServiceCall3 < / name >
< StartTime > 2010-01-18T 11: 11:41.570664 - 00:00 < / StartTime >
< EndTime > 2010-01-18T 11: 11:43.8987741 - 00:00 < / EndTime >
< ElapsedTime > 00:00:02.3281101 < / ElapsedTime >
status of <>failed < / status >
< ExceptionMessage > error here... < / ExceptionMessage >
< ExceptionStackTrace > Stack Trace here... < / ExceptionStackTrace >
< / commandeEmplacement >
(< / LoggingInformation > ');

v_txt VARCHAR2 (2000);

BEGIN

SELECT XMLTYPE. Extract (value (TT),'/ CommandInformation/Name/Text () '). GETSTRINGVAL()
IN v_txt
TABLE (XMLSEQUENCE (l_xml. Extract('/LoggingInformation/CommandInformation'))) tt;

DBMS_OUTPUT. Put_line (v_txt);

END;
Select...

means only 1 row can be returned.

Your select returns more than one line.
Change v_txt in a collection, define a cursor and the extraction of it or change the statement, i.e. it returns a single line.

---------
Sybrand Bakker
Senior Oracle DBA

"Getting the error 'exact fetch returns more than number of lines.
Hi try to run a query of Iam
but when I run what it it gives an error

Error report:
ORA-01422: exact fetch returns more than number of lines
ORA-06512: at line 9 level
01422 00000 - "exact fetch returns more than number of lines."
* Cause: Exact extraction specified number is less than the returned rows.
* Action: Rewrite the query or change the number of rows requested
here's my querey

SET SERVEROUTPUT ON
DECLARE
Emp_table_type TYPE IS an ARRAY OF
hr_api_transactions % ROWTYPE INDEX BY PLS_INTEGER;
my_emp_table emp_table_type;

BEGIN
I'm in 1.53
LOOP
SELECT * INTO my_emp_table (i) FROM hr_api_transactions
WHERE transaction_ref_table = 'PER_ALL_VACANCIES ';
END LOOP;
BECAUSE me IN my_emp_table. FIRST... my_emp_table. LAST
LOOP
DBMS_OUTPUT. Put_line (my_emp_table (i) .transaction_document);
END LOOP;
END;

Hello

'Re missing you the bulk of the Collections. Ask that you well want to have a glance on manual of oracle collections.
Replace your code...
```
DECLARE
TYPE emp_table_type IS TABLE OF
hr_api_transactions%ROWTYPE INDEX BY PLS_INTEGER;
my_emp_table emp_table_type;
BEGIN
SELECT *
BULK COLLCT INTO my_emp_table
FROM hr_api_transactions
WHERE transaction_ref_table = 'PER_ALL_VACANCIES';
FOR i IN my_emp_table.FIRST..my_emp_table.LAST
LOOP
DBMS_OUTPUT.PUT_LINE(my_emp_table(i).transaction_document);
END LOOP;
END;
```
Before you run the above script, don't forget to run the
```
set serveroutput on
```
I hope this helps.

PS-> mark as Complete/useful, if the apporoach above meets the expected result

Kind regards
Claudy

exact fetch returns more than requested number: retrieve first row
I have this statement:
```
FOR l IN C1 LOOP
 select amount,customer_id   INTO F_AMT,I_custid from zerorize where doc_id = l.doc_id and trans_type = C_py;
END LOOP;
```
I got this error:
```
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at line 172
```
I want to change my sql statement in such a way, it gets the first line. How am I suppose to add my where clause condition?
If you don't have a way to restrict your query to return only 1 row according to the data, you can use the line number...
for example
```
select data, data2, .....
from (
select data, data2, ....., rownum rn
from table
)
where rn = 1
```

5.6.1 pages: How to create a table with more than 999 lines?

5.6.1 pages: How to create a table with more than 999 lines?

The table on Pages v5.6.1 line selector is limited 3-digit, as it is in Pages ' 09 v4.3. Either use LibreOffice Writer, who does not have any constraint line on processing tables 3-digit, or any application spreadsheet for top 3-digit row needs.

Table manipulation more

Hello

In the attached VI, I look for one labeled byte 'CC' and build a subarray of length 5 begins at byte CC. I'm doing this research in the 1 d table that updates from an external source. 1 d table may contain incomplete data, where the first three octets, I need to build my subarray may appear to the top end of the table 1 d and the two bytes can show up at the beginning of the next table 1 d. But always successively...

If the five bytes are not present in the table 1 d, I want to keep what I have 'memory' and fill in the rest of the table using the next table 1 d that updates.

In the end, each subarray of 5 bytes will go through another logic to convert them into engineering units and display on the control panel. Since also, there may be several bytes labeled CC in the 1 d table, I have to be able to capture each value and not only the last reading.

Thank you for your help.

We want to include a value only if the CC was actually found and there are still 5 bytes for.

1. If the CC not found, searching D 1 table returns - 1. After adding 1, we will have a 0. If it is 0, do not understand.

2 If the CC has been found, but there are not enough bytes, the size of the sub-table would be less than 5. But we do not want to understand it because we need the full message.

If one of these two cases, we do not want to include. Thus, the OR (OR Not) will become a REAL only when these conditions are FALSE. The loop also stops when one of these conditions are fulfilled (conditional is continuous While true).

ORA-01422: exact fetch returns more than number of lines

Hello world
I want to create a procedure only allows me to perform selection et Update in my database, I have already create the procedure and compiled without problems but when I want to run this procedure, I have this error
ORA-01422: exact fetch returns more than number of lines
This syntax of my procedure
create or replace procedure app is
i nombre := 100 ;
o_username employees.first_name% TYPE ;
o_lastn employees. Last_name %TYPE
o_sal. employees % of SALARY TYPE ;
Start
loop
/ * display * /.
Select first_name, LAST_NAME, SALARY
in o_username, o_lastn, o_sal
of admin.employees where employee_id = i;
DBMS_OUTPUT. Put_line (' name: ' | o_username);
DBMS_OUTPUT. Put_line (' first name: ' | o_lastn);
DBMS_OUTPUT. Put_line (' salary: ' | o_sal)
/ * put a days * /.
Update employees
put salary = salary + salary *0.25 where employee_id = i;
commit;
/ * dbms_put.put_line (' new salary is: ' | ') sell2_tab (i)); * /
i := i + 1 ;
/ * list the data * /
/ * dbms_put.put_line (' new salary is: ' ") ;*/
output when i = 200;
end loop;
end app;
thnx

create or replace procedure APP is

Constant START_ID EMPLOYEES. EMPLOYEE_ID % TYPE: = 100;

Constant END_ID EMPLOYEES. EMPLOYEE_ID % TYPE: = 200;

O_USERNAME EMPLOYEES. Type % name;

O_LASTN EMPLOYEES. Last_name type %;

O_SAL EMPLOYEES. Kind of % of SALARY;

Start

for rec (select FIRST_NAME, LAST_NAME, salary

the admin. EMPLOYEES

where EMPLOYEE_ID between START_ID and END_ID)

loop

DBMS_OUTPUT. Put_line (' name: ' | rec. NAME);

DBMS_OUTPUT. Put_line ("first name:" | ") Rec. LAST_NAME);

DBMS_OUTPUT. Put_line (' salary: ' | rec. SALARY) / * setting days * /.

end loop;

Update EMPLOYEES

Set SALARY = SALARY + SALARY * 0.25

where EMPLOYEE_ID between START_ID and END_ID;

commit;

end app;

Error creating a salary. ORA-01422: exact fetch returns more than the requested number of rows in the hr_maintain_proposal_swi procedure insert_salary_proposal package

Hi all
We try to add new proposal for a salary of some employees from form August 1, 2015 (the Date of the beginning of employee)
There is no existing salary proposal doesn't exist for these employees.
We get below error.

ORA-01422: exact fetch returns more than the requested number of rows in the hr_maintain_proposal_swi procedure insert_salary_proposal package

Help, please.
Thank you
Tarun

Hi John,.

If it helps, take a look at the following note:

ORA-01422 exact Fetch returns more than number of lines requested in Hr_maintain_proposal_swi (Doc ID 1673527.1)

Kind regards

Rajen

Single - row subquery returns more than one line.

Hi Experts

I am faced with error

ORA-01427: single - row subquery returns more than one line.

MyQuery is:

select
   TO_CHAR(T.MR_REG_DATE,'DD')                     "DATE"
   ,CASE  
     WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) between 0 and 1 THEN ' 01'||'  - ('||'0 - 1 Month)'
     WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) BETWEEN 2 AND 12 THEN ' 02'||'  - ('||'2 - 12 Months)'
     WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) BETWEEN 13 AND 60 THEN ' 03'||'  - ('||'1 - 5 Years)'
     WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) BETWEEN 61 AND 120 THEN ' 04'||'  - ('||'5 - 10 Years)'
     WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) > 120 then ' 05'||'  - ('||'> 10 Years)'
    END age
  ,count(T.Mr_Code) No_of_Patient
  ,(  SELECT count(x.mr_code) mr_code
         FROM HMIS_MRINFO X
         where X.mr_reg_date between &FRM_DATE AND &TO_DATE
           and X.mr_code NOT in (select Y.mr_code from hmis_pat_add_dis_detail Y
                                  WHERE Y.mr_reg_date between &FRM_DATE AND &TO_DATE
                                )
        GROUP BY CASE  
                   WHEN trunc((MONTHS_BETWEEN(X.MR_REG_DATE,X.MR_DOB))) between 0 and 1 THEN ' 01'||'  - ('||'0 - 1 Month)'
                   WHEN trunc((MONTHS_BETWEEN(X.MR_REG_DATE,X.MR_DOB))) BETWEEN 2 AND 12 THEN ' 02'||'  - ('||'2 - 12 Months)'
                   WHEN trunc((MONTHS_BETWEEN(X.MR_REG_DATE,X.MR_DOB))) BETWEEN 13 AND 60 THEN ' 03'||'  - ('||'1 - 5 Years)'
                   WHEN trunc((MONTHS_BETWEEN(X.MR_REG_DATE,X.MR_DOB))) BETWEEN 61 AND 120 THEN ' 04'||'  - ('||'5 - 10 Years)'
                   WHEN trunc((MONTHS_BETWEEN(X.MR_REG_DATE,X.MR_DOB))) > 120 then ' 05'||'  - ('||'> 10 Years)'
                  END 
  ) Missing_MR
from hmis_mrinfo T,hmis_pat_add_dis_detail M
where T.mr_code = M.mr_code(+)
  and T.mr_reg_date between &FRM_DATE AND &TO_DATE
  &AGE_GRP
GROUP BY T.MR_REG_DATE
         ,CASE  
           WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) between 0 and 1 THEN ' 01'||'  - ('||'0 - 1 Month)'
           WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) BETWEEN 2 AND 12 THEN ' 02'||'  - ('||'2 - 12 Months)'
           WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) BETWEEN 13 AND 60 THEN ' 03'||'  - ('||'1 - 5 Years)'
           WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) BETWEEN 61 AND 120 THEN ' 04'||'  - ('||'5 - 10 Years)'
           WHEN trunc((MONTHS_BETWEEN(T.MR_REG_DATE,T.MR_DOB))) > 120 then ' 05'||'  - ('||'> 10 Years)'
          END 
ORDER BY T.MR_REG_DATE;

Please give some advice / solution.

I think this might do it for you

Select

TO_CHAR (T.MR_REG_DATE, 'DD') "DATE."

CASE

WHEN trunc ((MONTHS_BETWEEN (T.MR_REG_DATE, T.MR_DOB))) between 0 and 1 THEN ' 01' |'. - ('||' 0-1 month)"

WHEN trunc ((MONTHS_BETWEEN (T.MR_REG_DATE, T.MR_DOB))) BETWEEN 2 AND 12 THEN ' 02' |'. - ('||' 2-12 months)"

WHEN trunc ((MONTHS_BETWEEN (T.MR_REG_DATE, T.MR_DOB))) BETWEEN 13 AND 60 THEN ' 03' |'. - ('||' 1-5 years)"

WHEN trunc ((MONTHS_BETWEEN (T.MR_REG_DATE, T.MR_DOB))) BETWEEN 61 AND 120 THEN ' 04' |'. - ('||' 5-10 years)'

WHEN trunc ((MONTHS_BETWEEN (T.MR_REG_DATE, T.MR_DOB))) > 120 then ' 05' |'. ' - ('| ' > 10 years).

Age of the END

count (T.Mr_Code) No_of_Patient

, count (case when t.mr_code NOT in (select Y.mr_code from hmis_pat_add_dis_detail Y))

WHERE Y.mr_reg_date between & FRM_DATE AND & TO_DATE)

then t.mr_code

(end) Missing_MR

of hmis_mrinfo T, hmis_pat_add_dis_detail M

where T.mr_code = M.mr_code (+)

and between T.mr_reg_date & FRM_DATE AND & TO_DATE

& AGE_GRP

T.MR_REG_DATE GROUP