Table will not change its forced entry values.

Similar Questions

• My professional background of Windows 7 will not change.

  I have a Windows 7 Professional 32-bit computer, and will not change the background.  It is stuck on one front image, no matter what I did.  Now it is stuck on one color, I can change the color, but not to any real image.  I have a theme that has a slide show, but when I chose the theme, he said that my background is the photos for the slideshow, but when I look at its still a solid color.  If I right click on it does not give me the next opportunity to "change background".  There is an unsaved theme assigned a background in one color, but its not selected, and even if I select it and change the background it goes backward.  I can't even change the background, when I right click on an image and click on set as background.  If I save the theme, he recorded with the bottom, I wanted, and then creates a new theme unregistered with the solid as the background color and uses.  Any help would be appreciated.

  Hi, I found new information that might be useful.  It's in another thread, but I can't immediately find, but here is the important part:

  1 - Go to this folder: %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Themes\
  (copy and paste that in the start/search or Run box).

  2 - remove the TranscodedWallpaper.jpg file.

  3 try to set your wallpaper again.

  Sorry I can't find the link, but it was a confirmed a team of Microsoft TechNet blog.  I hope this helps!

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PS5 will not change the date registration

  PS5 will not change the date when I save a document I'm working. I tried save as and save and it keeps the date of the photo, in this case, a scanned image that swept the 09/07/11 @ 15:49. I saved many iterations of the PhotoShop photo and the date remains the same. I tried it with other photos and even once, it retains the original date. If I open in AI5 and save it, he recorded with the current date. Am I missing something here?

  I use the current build 12.0.4 x 64, Win7 Home Premium

  PAM

  Chances are Windows found the folder a folder "photo", and explore does NOT show you the date of the modified file.

  Personally, I hate having "automatically" selected multiple views for me, and I tweaked my copy of Windows so that it always shows me the "General items" view all records, be they full of photos or music or something else.

  You can check this by clicking on the name of the folder in the Navigation of Explorer (left), and then selecting Properties.  On the Customize tab, see what it says in the "optimize this folder for:"selector. ".  If it is different from the general items, change it to general Articles.  This gets you a good "Date Modified" column, indicating the date of the file.

  If you want to make a permanent change to Windows 7 (so all new folders are displayed in the form of General items in the folders, and automatic display selection is disabled), a value can be added to (or changed in) the registry as follows:

  Registry key: [HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\Shell\Bags\AllFolders\Shell]

  Name of the Data Type value

  FolderType REG_SZ NotSpecified

  -Christmas

• [CS4 |] JS] move anchored object does not change its geometricBounds

  Hello scripters.

  in my Indesign document I anchored objects like sidenotes, sometimes they are overlapping.

  To do this, I'm trying to move until they overlap, I used the following script:

  myInlineRectangles [k] .move (undefined, [0, -2]);

  I put this line in a while loop to move the object (until he do not overlap).

  It works, it moves the object (although I read that it is not possible). The only problem is that the geometricBounds remain the same.

  As I am comparing the geometricBounds in my "all-State" it ends in an infinite loop.

  Why the object does not change its geometricBounds after moving?

  How to avoid this?

  Thank you very much in advance for any response.

  Franzi_ska

  Hi franzi_ska,

  You will need the story containing the anchored object to recompose to get the new geometric limits (after each trip and assuming the anchored object can, indeed, move).

  Thank you

  OLE

• The default text alignment. Will not change despite the explicit specification.

  Recently converted to OBIEE 10.1.3.3.2.
  All alignemnt text in the PivotTable will not change to align "Left". I have put all possible horizontal alignments in the report between 'Left', but still shows as centered.
  
  Above applies to all reports (converted from Siebel or newly created).
  Am I missing something? Is there a global default value?
  
  Help, please.

  Hello

  Have you checked the file view.css and pivot.fst under... OracleBI\web\res\\b_mozilla_4.You can change the alignment of this file with PivotTable segment.

  Published by: TErsin Sep 3, 2008 10:57

• My your whatsapp will not change after update

  I'm back changing my tone whatsapp after the update, but it will not change back

  Greetings, cazrose. Thank you for the communities of Apple Support!

  I see that WhatsApp is not allowing you to change his ring back to what it was after upgrade your iPhone to iOS 10 6s. I'll be happy to help you!

  How can I change my ringtone for WhatsApp? -Follow the instructions of the support that I have found on the site of WhatsApp.

  Have a great day!

• How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  Click here and ask the staff of the iTunes Store to zero the balance of your account.

  
  (142584)

• Portege M700 will not change the screen orientation

  I installed the driver for the webcam for the M700, and every time I install it, I get the same error message:

  "Open Webcam driver fail - please restart camera or computer."

  I reinstalled the drivers of many times, and it still does not work.

  Therefore, I tried the msconfig method, disabled all the startup process and then reactivated their.

  The webcam shows the same error message, and now the screen will not change orientation when I rotate the screen.

  You try to use Windows XP Home edition or what? Generally, each laptop comes with preinstalled and configured operating system.

• iphone 6plus is configured to use the position landscape, like previous phones. mine does not change its position when changing phone flattened

  I have an Iphone 6plus will not change the position landscape by turning the phone just like my old 5. This can be corrected.

  Make sure that your phone is not locked in portrait mode.

  Slide upward to access the control center and make sure that the icon with the lock and semi circle is not enabled.

• Keyboard and spell check language will not change back to English after a stint at the French although everything changes again in English

  I changed language iPad in French (but not the region, which remains United Kingdom) in order to write an email in French.  Everything on the iPad changed in French as expected.  When I'm done I changed the language to English (UK) and everything changed in English unless the auditor keyboard and which remained in French.  I then changed to English (India) but the keyboard and spell checker is in French.  I have changed the language to the French and finally back to English (United Kingdom).  While everything on the iPad to the language changes expected, the keyboard and spell checker will not change to French.  How do go back to English?

  Press the 'globe' and select English.  It is the keyboard that determines the spell checker (not the language or region).

• Apple's music will not change the song on shuffle mode

  My iphone6 will not change the songs Apple music in shuffle mode. Once selected the song again and again.

  Hello

  update your iphone to ios9.2

  Settings > general > software update

• Mini 210-1080NR: down loaded Windows 10. view now showing BACK script and will not change. Mini 210-1080NR

  Try load W-10. Process appear to be normal. The display is now BACK showing script and will not change and cannot close the laptop down or off. Not a user made and do not want to complicate the issue.

  WAWood;

  The laptop has completed W - 10 download and installation seems to work as announced.

  The problem with the 1st attempt will be captured in Gremlins.

  Thank you for your quick response.

  Ben

• EA4500 will not change to the new public IP address

  I noticed that, after the new Firmware update, the EA4500 will not change to a new public address.  I check my logs and my IP address is the same that goes back to a 25/03/2012.  I changed my router to my old E4200V1 and it turns into a new address when the old one expires.   I tried several resets hard but in vain.

  Ask your ISP. The decision taken by the DHCP server from your ISP, what IP address it assigns. You must accept what they give.

• HP 15-r018dx Notebook PC brightness will not change

  Will not change the brightness on my HP 15-r018dx Notebook PC, without using the function keys or cursor in "Power Options." This started happening the day before yesterday; before that, I had no problem. I don't know what changed between yesterday and today.

  Could someone help me?

  Hi wkeyiosksol,

  Try using the Recovery Manager HP to restore the original drivers. Search for your graphics drivers and install them. Should be included as a high-definition or high-definition of NVIDIA Graphics Driver Intel graphics driver.