Tables and table data

Similar Questions

• Table attached using CHAR and VARCHAR data indicator type

  Hi all
  
  I would like to bring together 3 tables, but I am unable to get a perfect match (using =) between the CHAR and VARCHAR data type.
  
  A command exists to get impartially all data treated as CHAR or VARCHAR?
  
  Thank you in advance for your help!

  Apart from the fact that it's the wrong forum...
  Just use:
  Trim (your_char_column) = TRIM (your_varchar2_column)
  However, it is bad practice because it is a showstopper for the optimizer and will probably lead to poor performance.
  Consider re-thing your data model PK - FK relationships.

  Concerning

• Reading file from the ftp server and importing data into the table

  Hi experts,
  
  Well, basically, I text with different layout files have been uploaded to an ftp server. Now, I must write a procedure to recover these files, read and insert data into a table... what to do?
  
  your help would be greatly helpful.
  
  Thank you

  user9004152 wrote:
  http://it.Toolbox.com/wiki/index.php/Load_data_from_a_flat_file_into_an_Oracle_table

  See the link, hope it will work.

  It is an old method, using the utl_file_dir parameter that is now obsolete and which is frankly a waste of space when external tables can do exactly the same thing much more easily.

• copy and paste the table data

  Hi all
  
  I'm trying to convert some WinHelp files old HTMLHelp format. All files have as subjects with the same tables of three columns.
  
  Part of the done conversion tables look more "pretty", then we have a new scheme of formatting of table together upwards in a model of .htt file.
  
  It is, I can copy the new table and its formatting in my editor WYSIWYG RoboHelp... but to transfer DATA from the old table, I have to cut and paste data from each cell individually. I can just select the table of old (and its data) "in mass" and paste the data into the new table snazzy. Because the tables have three columns and up to 30 lines, it can become quite painful, cut and paste data from each cell in the corresponding cell in the new table.
  
  Is it possible to make this process faster? Ideally, I'd like to just reduce the process steps:
  
  (1) copy a blank version of the table of new, prettier in RoboHelp WYSIWYG.
  (2) cut out of the old table data.
  (3) paste the data into the new table.
  
  I hope I do my question clearly...
  
  Thanks in advance!
  Dave

  Colum, I think that his anxiety is caused by not being not able to copy/paste the content in multiple cells, you can in Word.

  Unfortunately, Dave, that is not possible...

  Leon

• Select the name of the table and some data in the same sql

  If anyone can help with this?
  
  I need the name of the selection table that have columns called col1 (which could be done with the help of dba_tab_columns) and col1 data itself.
  
  Here is my desired outcome:
  
  table_name col1
  
  alex tab1
  tab2 bob
  .... ....
  Tabn sue
  
  TIA.

  You can use a cross join, like this...

  SELECT ut.table_name
  x.column_name
  OF some_table_name x
  ut user_tables
  WHERE ut.table_name = upper ('some_table_name');

  or...

  SELECT ut.table_name
  x.column_name
  OF some_table_name x CROSS JOIN user_tables ut
  WHERE ut.table_name = upper ('some_table_name');

  This will work if you have one or more column value returns. Basically, a table name is multiplied by the number of lines found in the table. I hope this helps.

• Using af:poll to refresh and send data in table page and bound to the data in ADF

  Hi all

  Today, I practiced component survey. I'm going with blog post.

  JDeveloper, Oracle ADF & amp; amp; Java: The use of af: poll to refresh and send data in the page and databound chart in ADF

  all feature fine work. but where I stuck in this stage

  • Start your application and make changes to database and see the new user interface in every 4 seconds.

  but reloaded data seems to be always 1.

  I make the changes 3 or four times in db.i may be able to see the changes. but data reloaded always showing me 1.

  public class Mbeans {
      private RichActiveOutputText activeoutputtext;
      private String refreshinfo;
      private int i = 0;
      private RichPanelCollection pcl;
  
  
      public Mbeans() {
      }
  
  
      public void setActiveoutputtext(RichActiveOutputText activeoutputtext) {
          this.activeoutputtext = activeoutputtext;
      }
  
  
      public RichActiveOutputText getActiveoutputtext() {
          return activeoutputtext;
      }
  
  
      public void polllistener(PollEvent pollEvent) {
          // Add event code here...
          BindingContext bindingContext = BindingContext.getCurrent();
          DCDataControl dc = bindingContext.findDataControl("AppModuleDataControl");
          AppModuleImpl am = (AppModuleImpl)dc.getDataProvider();  
          am.getEmployeesView1().executeQuery();
          i = i+1;
          refreshinfo =  "Data Reloaded-" + i+"  Total Row-->"+am.getEmployeesView1().getRowCount();
          AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();
          adfFacesContext.addPartialTarget(pcl);
          adfFacesContext.addPartialTarget(activeoutputtext);
          
      }
  
  
      public void setRefreshinfo(String refreshinfo) {
          this.refreshinfo = refreshinfo;
      }
  
  
      public String getRefreshinfo() {
          return refreshinfo;
      }
  
  
      public void setPcl(RichPanelCollection pcl) {
          this.pcl = pcl;
      }
  
  
      public RichPanelCollection getPcl() {
          return pcl;
      }
  
  
      public void setI(int i) {
          this.i = i;
      }
  
  
      public int getI() {
          return i;
      }
  }
  

  Thank you

  HM, I do not have the sample

  What place is the bean in? It should be at least in viewScope...

  Timo

• Is it possible to record the interview in cloud Service Oracle table data before submitting

  Hello

  We use customer portal application and would like to save data in Oracle Service cloud tables between interview, before submitting.

  Y at - it an option to save the data?

  the cloud of 12.2 current supports, pre loading data and submitted data. Please help on this.

  Thank you

  Vivek

  Thanks for the inputs.

  We strive to implement save button and button Save & continue on each page, because we have many issues to be resolved.

  In our scenario, a folder must be created for all the session data.

  Thank you
  Vivek

• Loading XML into the relational Table data

  Hello

  I get a generated XML file to other tools (Windows), I am trying to create a Linux shell script that will gather the necessary XML file to my Linux server, then ask Oracle to use this file to load the XML data into a relational table. This activity and the data will be needed on an ongoing basis.

  I tried two ways. First, I loaded the XML document into the database and tried to extract the data directly from the document, but it does not work. Now I want to try to read the data directly from the file on the server through select, however I don't get all the returned data. In the Select statement below, I am trying to query the data to see what is returned for my tests.

  Create Table ci_results_table (transactionID Varchar2 (100), //transactionID should be PrimaryKey but became errors in test of insert, PK so deleted NULL value)

  message Varchar2 (200),

  This Varchar2 (50).

  XMLType of the ProcessedDate,

  status Varchar2 (50).

  sourceFile VarChar2 (100));

  Select x.*

  from XMLTable)

  ' TSPLoadResults/results '.

  PASSAGE xmltype (bfilename('CMDB_DEVADHOCRESULTS_DIR','LoadResults-HP_146.results.xml'), nls_charset_id ('AL32UTF8'))

  COLUMNS

  transactionID PATH Varchar2 (100) 'TransactionID '.

  Result XMLType PATH 'result ',.

  Message Varchar2 (200) PATH "Message."

  PrimaryKey Varchar2 (50) PATH "PrimaryKey"

  Date of ProcessedDate path "ProcessedDate."

  Status Varchar2 (50) PATH "Status."

  SourceFile VarChar2 (100) PATH "SourceFileName.

  ) x

  ;

  Eventually, I'll have to build on that to limit the returned data to records where SourceFileName is like '% PA' and insert what is returned in to the ci_results_table. Attached is an example of the XML results file I am trying to load, it is named "ResultsTransformedtoUnix" because I used dos2Unix to convert Unix which can be good or bad. (I send the output file must be converted to the format BACK until the other application can read). Original (before converting Unix) file named in the script is also attached.

  Help, please. Thank you!

  Hello

  I see some bad things in your query.

  (1) obvious one, explaining why you get all the data: there is a typing error in the XQuery expression, there 'result' not'slead.

  (2) ProcessedDate can be extracted as a date (at least not directly) because it actually represents a timestamp, use the TIMESTAMP WITH time ZONE HOURS and cast back to DATE data type in the SELECT clause

  (3) transactionID is an attribute, it must be accessible with ' @' (or ' attribute:' axis)

  (4) if the encoding of file really is ISO-8859-1 as suggested in the prologue, then do not use AL32UTF8 but the name of the corresponding character set: WE8ISO8859P1

  Here is the query to work:

  select x.transactionID
       , x.Message
       , x.Primarykey
       , cast(x.ProcessedDate as date) ProcessDate
       , x.Status
       , x.SourceFile
  from XMLTable(
         '/TSPLoadResults/Result'
         PASSING xmltype(bfilename('XML_DIR','LoadResults-HP_146.results.xml'), nls_charset_id('WE8ISO8859P1'))
         COLUMNS
           transactionID Varchar2(100)            PATH '@transactionID',
           Message       Varchar2(200)            PATH 'Message',
           PrimaryKey    Varchar2(50)             PATH 'PrimaryKey',
           ProcessedDate timestamp with time zone PATH 'ProcessedDate',
           Status        Varchar2(50)             PATH 'Status',
           SourceFile    VarChar2(100)            PATH 'SourceFileName'
       ) x
  ;
  

  Directly on the file using this query will only be decently (for large files) on 11.2.0.4 and beyond.

  On older versions, first load the file into a (temporary) XMLType column with binary XML storage and CHOOSE from there.

  because I used dos2Unix to convert Unix which can be good or bad.

  This conversion should not be necessary.

• Detail table data control not insert data

  Hello

  I use JDev 11.1.2.4 and fusion web application, I have 2 main table and, when I run APP module and insert data in the table in detail its registered successfully, but when I drag the VO of the data control to af:form some data and other will be null.

  Any suggestion?

  Concerning

  Finally I found the solution

  https://forums.Oracle.com/message/10493807

• external table data with several locations pump

  Hello
  I'm on:
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - 64biit
  SunOS 5.10
  
  I am trying to create a table of data pump external at the same time, with the location of the files previously created using pump.
  This is the same as the example given in step 10-13 here:
  http://docs.Oracle.com/CD/B19306_01/server.102/b14215/et_dp_driver.htm#i1007502
  
  But when I do this and select all the lines in the resulting table, I get the error:
  
  ORA-29913: error in executing ODCIEXTTABLEFETCH legend
  ORA-29400: data cartridge error
  KUP-11011: file / < filepath > sys_tables.dmp is not valid for this load operation
  ORA-06512: at "SYS." ORACLE_DATAPUMP', line 52
  
  Can anyone help?
  Here is a script of what I do...
  
  
  create the directory message_archive_dir as ' / your/path/directory "; -change default directory
  -chmod 777 your way
  
  create the sys_tables table
  external organization
  (type ORACLE_DATAPUMP
  THE DEFAULT DIRECTORY MESSAGE_ARCHIVE_DIR
  LOCATION ("sys_tables.dmp"))
  AS
  Select object_id, object_type
  of object
  where owner = 'SYS '.
  and object_type = 'TABLE '.
  and rownum < 11;
  
  create the table sys_indexes
  external organization
  (type ORACLE_DATAPUMP
  THE DEFAULT DIRECTORY MESSAGE_ARCHIVE_DIR
  LOCATION ("sys_indexes.dmp"))
  AS
  Select object_id, object_type
  of object
  where owner = 'SYS '.
  and object_type = 'INDEX '.
  and rownum < 11;
  
  Select * from sys_tables
  Union
  Select * from sys_indexes;
  
  -all 20 rows returned!
  -now I combine the two dmp files in a single table...
  
  create the table sys_objects
  (
  object_id NUMBER (14).
  object_type VARCHAR2 (30)
  )
  EXTERNAL ORGANIZATION
  (
  TYPE ORACLE_DATAPUMP
  THE DEFAULT DIRECTORY MESSAGE_ARCHIVE_DIR
  LOCATION ('sys_indexes.dmp', 'sys_tables.dmp')
  );
  
  Select *.
  of sys_objects
  where rownum = 1;
  
  -ok returnes one line (one of the dmp files work)
  --Choose so all lines...
  
  Select *.
  of sys_objects;
  
  ORA-29913: error in executing ODCIEXTTABLEFETCH legend
  ORA-29400: data cartridge error
  KUP-11011: file / < filepath > sys_tables.dmp is not valid for this load operation
  ORA-06512: at "SYS." ORACLE_DATAPUMP', line 52
  
  Can you see what I'm doing wrong?
  
  Any help is greatly appreciated!
  Thank you.

  user9969845 wrote:
  ... Etc...

  TYPE ORACLE_DATAPUMP
  THE DEFAULT DIRECTORY MESSAGE_ARCHIVE_DIR
  LOCATION ('sys_indexes.dmp', 'sys_tables.dmp')

  Combination dump files

  Files dump populated by different external tables can all be specified in the LOCATION of another external table clause. For example, data from different databases can be unloaded in separate files, and these files can then be included in an external table defined in a data warehouse. This provides an easy way to aggregate data from multiple sources. The only restriction is that the metadata for all external tables is exactly the same. This means that the game characters, time zone, schema name, table name, and column names must match. In addition, the columns must be defined in the same order, and their data types must be identical. This means that after you create the first external table you must remove it so that you can use the same table name for the second outer table. This ensures that the metadata in two dump files is the same and they can be used together to create the external table even.
  8 2

• How to load data from matrix report in the base using ODI table data

  Hello
  
  How to load matrix report data in the base table data using oracle Data Integrator?
  
  Description of the requirement:
  
  This is the data from matrix report:

  JOB                       DEPT10                DEPT20  
  ___________________________ _____________
  ANALYST                                           6000
  CLERK                   1300                     1900 

  Need to convert it to the format below:
  

  JOB                             Dept                        Salary
  _____________________________________________
  ANALYST                  DEPT10      
  ANALYST                  DEPT20                     6000
  CLERK                       DEPT10                    1300
  CLERK                       DEPT20                    1900
      

  Thank you for your help in advance. Let me know if any other explanation is needed.

  Your list seems to be a bit restrictive, you can do much more with the procedures of ODI.

  If you create the new procedure and add a step. In the 'source' tab command you define technology and pattern according to your source database. Use the unpivot operator as described in the link, please, instead of using "SELECT *' use the column names and aliases for example:"

  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  Then in your tab 'command on target' defined technology and drawing on your target db, then put your INSERT statement for example:

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  VALUES
  (
  : job,.
  : deptsal,.
  : saledesc
  )

  That's why you use bind variables from source to load data into the target.

  Obviously if the source and target table is in the same database, you can have it all in a single statement to the "command on target' as

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  also assign the log count "Insert" on the tab corresponding to your INSERT statement, so that you know how many rows you insert into the table.

  I hope this helps.

  BUT remember that this feature is out in Oracle 11 g.

• Table data type

  Is there any equivalent data type to create a table inside a stored procedure or a package, and the table is only valid in the stored procedure or package.
  Something like this [http://www.developer.com/db/article.php/3414331/Using-the-Table-Data-Type-in-SQL-Server-2000.htm] what we have in sql server.
  
  I'm pretty new in Oracle world.
  
  Any help will be much appreciated.
  
  Thanks in advance.

  Yes... You can declare a record type in the package body

  TYPE rec_type () IS RENDERING
  NUMBER of col1,
  col2 VARCHAR2 (2 CHAR)
  ....
  );

  then simply declare a type of table top the record type

  TYPE tab_type IS TABLE OF THE rec_type;

  You can make statements within the body to keep it private, or in the spec to make it public

  It could be that useful...

• build a dynamic array to an array of 1 D of waveforms 4 graphics, including time and all data information

  Hallo!

  I tried to put entries generated in a table with the current value of the time stamp in the first column and the data of a table 1 d of waveforms of 4 cards in the other 4 columns.

  I have some difficulties to match the data in the table. I ve simulated the code I've written and I see that the time stamp but I ve got none of the values of data in my table. I want to ask you what you think of my code and how can I achieve my goal?

  Corresponding VI is attached below.

  Thanks in advance for the answer.

  I think you're looking for it.

• Open the spreadsheet at the request and add data

  Using a cDAQ 9172 and Labview 8.2, I collect four channels of noisy pressure and temperature data collected during a product test.  The data are shown live on the band on the front panel cards after be smoothed by the average feature of the sample Compression Express vi.  All this works pretty well.

  Data are presented to the test operator so that he can see when the test conditions have stabilized, which usually takes 3 to 5 minutes.  After stabilization, I want to be able to press a button on the front panel so that a spreadsheet is open (ideally, with the original opening time as part of the file name) and a scan of the four data channels are added to the spreadsheet (with a timestamp).  Then, ongoing test for 1 or 2 minutes, I want to again push the button every 10 or 15 seconds or so to add more data analysis, so that we can see later that the conditions had really stabilized.  The exact date and the number of analyses of additional data is not critical, I just want to be able to connect to another 4 to 8 lines of data before you complete the test.

  I have a kind of sort of do this, shown on the seal 'on demand spreadsheet.vi' below.  Noisy signals are shown here numbers just under the random name embedded in a table (which is how my data writing to a spreadsheet file in my actual program).  The problem with this arrangement is that the spreadsheet file is created each time that I start the vi and there are several times during execution of tests and data are not collected for some reason any.  Accordingly, we would end up with a large number of files with no or data without meaning .xls.  I just want to create the worksheet file when I press the button (s) during a successful test after conditions have stabilized.

  

  I tried a slightly different approach in the joint 'on demand spreadsheet 2.vi' below where I added a switch to toggle to activate a case to open the spreadsheet, and an additional button to save data.  It seems like it should work, but I don't get all the lines of data, only the headers.

  

  I'm still pretty new to all this and I have spent days trying to figure this out.  Any help is greatly appreciated.

  I don't have 8.2.  You can either save my vi and publish it on the thread Downconvert VI ask, or you could look at just the image:

  

• need help with hex and handling data extraction

  Hello

  I have able to transmit hexagonal commands on the serial port of my camera and receive responses in hex him successfully. I was able to confirm this by changing the display format to the spell for the control and the indicator. Now, I want to store the portion of the hexagonal received data and use it in my future orders. Example of received data as below:

  0001 1100 0010 E002 6 93 4D7E 2C4D AA66 F00D

  The red blocks will be incorporated in the next command so that when I sent this command it will look like this:

  F00D 0014 2000 0003 0000 0020 77AF E002 6 93 4D7E 2C4D

  In short, send the command and get response, extract and store data in red blocks, then send different control that contains the data that is stored. Everything is in hexadecimal format. Question is how can I extract/store the bytes wanted to and then rebuild a hex command containing these bytes? Can I convert it to normal string, byte array, or hexagonal table? If we use the latest methods of 2 conversion, I need to ensure that the zeros are not lost.

  I enclose my VI. Please take a look and help to provide a solution.

  Thanks in advance.

  Here, s what I had in mind (LabVIEW 2010):