Tecra A9 installed with Vista - need to downgrade to XP Corp. but I get an error.
I have A9 with Vista.
I put my XP Corp drive so I can downgrade to XP,
I press F2 on the screen of the Bios and boot from the disc.
I press a key to boot from cd - then the installer inspects the hardware configuration
then the Windows install blue screen, go to Setup starts windows...
Here comes prob.
I get to the screen:
"Welcome to setup".
1. to configure Windows P now, press ENTER
"
If I press Enter, and I get
"The establishment did not the hard drives installed on your computer. Make sure that the hard drives are powered on and properly connected to your computer.
Make sure that the hard drives are powered on and properly connected to your computer, and all disks associated hardware configuration is correct. This may involve running a manufacturer provided or set up diagnostic program. Implementation cannot continue
"
Could I have some advice, please
I know the drive works great, I used it on my PC wife recently.
Thanks in advance.
Luke
Hello
I know that the solution ;)
You must first install the Intel Matrix storage Manager!
You can find it here:
http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21
But a question; why don t search you in the forum of similar question?
I found this:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24901
First use the advanced search forum before you post a question!
Best regards
Tags: Toshiba
Similar Questions
-
ZOOSTORM DESKTOP PRE INSTALLED WITH VISTA
ZOOSTORM DESKTOP PRE INSTALLED WITH VISTA HOME COMES WITHOUT A VISTA CD OR RECOVERY DISK
YOU HAVE TO DO TO REINSTALL VISTA OR CAN I GET A COPY, WE HAVE THE KEY TO VISTA, THE OFFICE IS
ONLY 12 MONTHS OLD AND ZOOSTOP DO NOT PROVIDE A CD WITH DESKTOP COMPUTERS THERE IS MOREYou will need to contact the computer/Zoostorm manufacturer and ask how to do recovery disk/s.
Ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
Or borrow a good DVD (not Dell, HP, etc.) Vista.
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
See you soon. Mick Murphy - Microsoft partner
-
I need help about illustrator. I have the portable version of CS6, install and won't let me open the program. I get the error: 1 I have windows 7
Error code 1 is often associated with permission issues. Have you tried to install Illustrator in a new user account with admin rights? If you want to download CS6, here's how to get it through creative cloud: html http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications.
Let us know how it goes.
Concerning
Stéphane
-
I try to install the update update of security for SQL 2005 service pake 3. I have vista 2 this update applies to my computer I get an error code ff or c0000005
1. navigate to the following registry key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Setup)
2. find the "Summary" (REG_DWORD), and then change its decimal value from 1 to 0
3. restart the computer
4. install the same update. It should work.
-
I am trying to install Windows Vista SP1, but I get an error message.
I tried several times to install vista sp1 but I get an error - my habit Norten run because it has SP1 to exploit any help would be appreciated because I am really frustrated now
original title: Vista SP1 questionI tried several times to install vista sp1 but I get an error - my habit Norten run because it has SP1 to exploit any help would be appreciated because I am really frustrated now
It would be in your best interest to post your question in a "technical" forum, which specializes exclusively service pack issues section.
Try this one:
Windows Vista IT Pro - Windows Vista Service Packs Forumhttp://social.technet.Microsoft.com/forums/en-us/itprovistasp/threads
-
original title: error with ehshell.exe
I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?
This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.
You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.
-
I am trying to install a software that is available, but I get this error error 1330
Matter of trust ERROR 266 WinVerify
I am trying to install a software that is available, but I get this error 1330 error message: a file that is requires cannot be installed because the file E:\data1.cab has an invalid digital signature. This may indicate that the cab file is correct: error 266 was returned by Win check Trust. The company sent me an another install disc, but the same error message. Is it matter of certificate authentication if yes, how can I fix. Thank youI am trying to install a software that is available, but I get this error 1330 error message: a file that is requires cannot be installed because the file E:\data1.cab has an invalid digital signature. This may indicate that the cab file is correct: error 266 was returned by Win check Trust. The company sent me an another install disc, but the same error message. Is it matter of certificate authentication if yes, how can I fix. Thank you
They should be able to guide you through some sokution for this.
(The Publisher of the software).
If you have this update installed:
http://support.Microsoft.com/kb/978601you could try removing it, restart, install this:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=29434... restart and then try again to your installation. Otherwise they may need to view your certificates and remove/install-some manually for their product (if it is supported under Windows XP.)
-
Can help please I want to play freecell and solitaire that came with my pc but I get this error message... Why would he do that? How can I solve this problem?
original title: windows cannot open this file: free cell.exe.mui.Hello
1. don't you make changes to the computer?
These can help you:
Method 1: Perform a system restore
To get the procedure perform system restore, open the site mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Method 2: Clean boot
For the procedure to place the computer in a clean boot, open the site mentioned below
http://support.microsoft.com/kb/929135.
Note: To set the computer back to start normally, use the step 7 in the same link.
Method 3: Check the new user account
Open the site mentioned below for steps to create a new user account
http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account.
I hope this helps.
-
I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I noticed that my repertoire records in library view LR does not show images correctly: If there is a folder with subfolders, the folder contains 0 images, but sub records show the correct number of images. What happened and is there a solution? I tried to uninstall Lightroom and re - install, but the problem persists.
Here is a screenshot of the error message:
Post edited by: Joseph Costanza, Jr.
See here for a solution.
-
Trying to access the electronic books in the library of our audience. Downloaded the software, (Overdrive Media Console) but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.5.0.1. How to do only what I can read ebooks? People have suggested using IE, but I prefer to much HELP Firefox!
Try to update the media player while using Internet Explorer. Windows Updates site uses ActiveX to perform "duties. Firefox does not support ActiveX.
-
I would like to install the trial version of Illustrator but I get an error 213:11 output
I would like to install the trial version of Illustrator but I get an error 213:11 output
Not exactly the same error code, but it can help
Error 213:19 license https://forums.adobe.com/thread/1907953 because of write permissions
-
I try to install Captivate on my computer, but I get an error that this product cannot be installed on a 64-bit system...
Not continue where to go from here?
Hi Maurice.
Thanks for the answer, I believe, a 32-bit operating system. I ended up searching on Google I found a download for 8 Captivate for 32-bit, but I can't find 9 Captivate to download 32 bit...
-
I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?
Hello
Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.
Hope that helps!
Kind regards
Sheena
-
Have set up my own domain and linked to my portfolio but I get an error message when I type the URL, y at - it somewhere I need to "publish" the site?
To all those who have suffered from this problem of background, there is a "Publish" button down green...
-
I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error
Hello
This link may help: the application failed to start properly (0xc0000022).-Microsoft Community
Kind regards
Sheena
Maybe you are looking for
-
I connected my iPhone to my Mac and opened iTunes, I found to try to synchronize files from my Mac to my phone, but it came with an error message saying that my phone is synchronized with an iTunes library on an old computer I had, I never connected
-
Contact Express Outlook Mobile
HelloHow can I import my contacts from outlook express (wab file) from an old XP to my Thunderbird machine newly installed on my machine Win7The Thunderbird import function does not specify a file
-
Satellite Pro A120 - Second hard drive on secondary IDE channel
Hello I have a Satellite Pro A120 xp sp3.I tried so it can recognize a 2nd hard drive on the secondary ide channel, but it will not. CD player has been removed and replaced by one of them, the with the pata to sata interface. [http://newmodeus.com/sh
-
Selection problem 2014 Mac mini disk system
Hello l have a 2014 mini Mac I used Bootcamp to install Windows 7. However it is unable to boot into OSX or Win7 institutionalized. It gets stuck at startup screen saying that you normally only see the option key. Have tried to adjust the correct ope
-
Hello I'm trying to update the value of a control on a Panel, when the value of another control on another Panel is changed. The two panels are saved in two .uir different files, so there are two associated .h files generated by CVI. The problem is