Test the Boolean function

Similar Questions

• How can I test the Boolean State of the button action?

  Hello
  in as2.0, how can I test the Boolean value if a key has been pressed or not?
  
  I have a function simple im trying to work with like that...
  
  button_btn.onRelease = function (success: Boolean) {}
  If (success) {}
  trace ("we pressed the button value is true");
  }
  else {}
  trace ("value is false");
  }
  };
  
  working with Boolean values in this way is new to me - pointers will do - thanks!
  

  I got it! Here's a quick run down in a table format, hehe

  cry [0]...
  [1] create a Boolean variable
  [2] create your switch case statements correctly //which I have...
  [3] condition your Boolean in case statements
  [4] and then create your button managers
  [5] if the Boolean value is true, then say stream_ns.seek (0)
  [6] happy!

  Thanks again K - have a nice day.

• Count when the boolean function is true / complete the table

  Hi all

  I think that this is a task fairly easy, but for some reason, I can't get it to work.

  The problem is explained below:

  I have 3 slider that gives either 0,1,2. I have a button "next" which is actually a Boolean button. Every time I click on the 'next' button, I want the values of the scabbard 3 (0,1,2) to go into a table. The array index is decided by how many times I clicked on the button "next". Basically if I click Next the first time, the values should go to the 0th row, when I clicked on the second time, he should go to the first line, etc... This should continue to happen until I click on the button stop, when it should display the table populated with its index corresponding to me.

  I tried to use a program for a Boolean County who continually keeps count how many times I pressed the next button. But this loop continues indefinitely. Otherwise, it starts from 0. I don't know how to do it well.

  The program is presented here with comments.

  Help, please

  Gayatri

  You should really use a structure of the event.  Keep the table in a shift register and simply use table build to y to add whenever the next value change event will occur.  Have another event for the stop button.

  

• pass the Boolean parameter?

  I need to pass a Boolean (true/false) for a full load, so I can shrink down tons of codes.

  But it's not working.

  How should the code look like?

  function myLoad() {}

  load codes

  var pass: Boolean = new Boolean (true);

  myLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, function(e:Event) {loadComplete (e, col)});

  }

  function loadComplete(e:Event,_pass:Boolean):void {}

  If (pass = true) {}

  trace ("doing something");

  } ElseIf (pass = false) {}

  trace ("do something else");

  }

  }

  I don't know about the passage of the arguments by the listeners, but as far as contingency go, '=' is not what you want to use... "is" is for comparison.  And if you test the Boolean values you do not need to write the comparison...

  {if (Pass)}

  } else {}

  }

  And as I said, I know not for the passage of the arguments through designations of listener function, so if you've had success before, then very well.  I was led to believe that it's more complicated a case to solve.  Without knowing how, while it might involve more lines of code, I would use the conditional test to assign the listener rather than deciding which code to use the function loadComplete.  So I would like to use one of the two headphones and one of two complete functions through the...

• Don't know how to test the output of the PL/SQL function

  I have a function in the package '. " XCCC_PO_APPROVALLIST_S1' called 'does_cpa_exist ':
  

     FUNCTION does_cpa_exist(
        p_document_id              IN       NUMBER
     )
        RETURN BOOLEAN
     IS
        l_cpa_exists VARCHAR2(100);
     BEGIN
        SELECT 'Y'
          INTO l_cpa_exists
          FROM po.po_requisition_lines_all prla
             , ap.ap_suppliers pv
             , ap.ap_supplier_sites_all pvsa
         WHERE prla.vendor_id = pv.vendor_id
           AND prla.vendor_site_id = pvsa.vendor_site_id
           AND pv.vendor_id = pvsa.vendor_id
           AND prla.requisition_header_id = p_document_id
           AND EXISTS(
                  SELECT pha.vendor_id
                    FROM po.po_headers_all pha
                   WHERE pv.vendor_id = pha.vendor_id
                     AND pvsa.vendor_site_id = pha.vendor_site_id
                     AND pha.org_id = fnd_profile.VALUE('ORG_ID')
                     AND pha.type_lookup_code = 'CONTRACT'
                     AND pha.authorization_status = 'APPROVED');
  
        RETURN TRUE;
  
        IF (p_document_id IS NULL)
        THEN
           RETURN FALSE;
        END IF;
     EXCEPTION
        WHEN OTHERS
        THEN
           RETURN FALSE;
     END does_cpa_exist;

  The pl/sql valid and commits OK in TOAD.
  
  I ran the sql in the EBS, and took the path of the workflow looks like that function returned a value of false.
  
  I pass to the function a document_id.
  
  I was wondering how I might test the output of the function from TOAD?
  
  I tried:
  

  select XCCC_PO_APPROVALLIST_S1.does_cpa_exist(1017934) from dual;

  But get errors:
  

  ORA-06552: PL/SQL: Statement ignored
  ORA-06553: PLS-382: expression is of wrong type

  I do probably bad 101 things here, but I would still ask thinking and risk of being shouted at.
  
  Any advice appreciated,
  
  Thank you

  I was wondering how I might test the output of the function from TOAD?

  Try

  begin
    if xccc_po_approvallist_s1.does_cpa_exist (1017934)
    then
      dbms_output.put_line ('True');
    else
      dbms_output.put_line ('False');
    end if;
  end;
  /
  

• How to connect the parallel test using the logarithmic function Teststand database result

  Hello

  How can I connect a test result of 4 EHR tested in parallel using the logarithmic function Teststand database

  I use Labview 2013, 2013 Teststand and sequential model.

  The test is performed using a single digital card (SMU-6556). The FSD 4 is connected to the port of the digital map and is tested in parallel.

  Currently at the end of the test, I would have a report with all the measures, but I need 4 reports (1 report / dut)

  TKS

  
  

• How to change the number of items in number to Boolean, function VI table

  Hi, I'm working on using the digital output of data acquisition to control the digital input of a DAC, and I used the Number function in Boolean table. VI to convert the number to a Boolean array. The maximum number is 4096, so it must be composed of 12 elements.

  For the description of the VI, it is said that Boolean matrix returns a table of 8, 16, 32 or 64 elements, according to the number of bytes in the whole. Therefore, I change the number of channels in the task to 16, but it still does not work. The suggesitions are greatly appreciated.

  Thank you!

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 12
  Number of data channels : 32

  Task name: _unnamedTask<1B>

  Once you have the array of Boolean, you can resize using table tools. For example you can use the "new range" with a length of 12 to pad the table of 12 elements of Boolean values (you can also use a subset of table).

• For the Boolean result of a numerical limit test success/failure

  Hello

  Requirement

  My main sequence, I would like to call a subsequence of steps. If one of these tests in the subsequence fails, the main sequence must ignore all remaining events for this object to be measured.

  Plan

  I intend to have the subsequence return a Boolean flag in the main sequence, which would check this flag and jump to the group stage of cleaning if necessary. Most subsequence of testing is performed in a loop, so I thought of this approach:

  bool allPassed = true;
  foreach (itemsToTest) {
      allPassed = allPassed && currentTestResult;
  }
  
  return allPassed;
  

  Question

  It's easy to do with a pass/fail test, I couldn't find a way to get the Boolean result of a numerical limit test.

  Questions

  1. Is there a way to get this Boolean result?
  2. Is there a better way to meet my needs?

  Thank you!

  Using the Post Actions would be so much easier.  You can configure the sequence to do various things in failure, including a step you specify (that is, cleaning).

• Is it possible to an array of Boolean function number in a case without the table of Boolean structure?

  Hi guys! In my program, my "robot" (lego mindstorms EV3) has essentially read a code bar and do different things according to the codes bar, he reads and so I have an array of Boolean, and basically I need compare to the other Boolean tables. First of all, I used the "Boolean chart at number" function and then just put it in a structure of the case, but it turns out that the Boolean value to number function is not compatible with my Lego EV3 brick, so I have to find another way to do this. Any ideas?

  Help is appreciated! If you have any questions or if my question is confusing, just ask!

  Thank you.

  
  

• Can I use Boolean operators, nested expressions, and generic expressions in the search function of the outputs of the HTML5?

  I come to the world CHM HTML5. Is there a way to enable/activate my audience to use:

  • Advanced (i.e. other than AND & OR) of the Boolean operators, e.g., CLOSE or NOT
  • Nested expressions, for example, newsletter AND ('formula design' OR 'form')
  • Generic expressions, for example, network * or MD5?

  I am currently using RoboHelp 10.

  This version runs (and if not, then don't RoboHelp 2015) support the ability to activate one of these in RoboHelp (via a parameter of GUI or even by manually changing the search.js or another file in the output of HTML5)?

  At present, RoboHelp (2015) only supports simple AND & OR operators if I'm not mistaken. If you need an advanced search, I advise you to look in the Zoom website search engine

  You can edit the mhfhost.js file. The search mechanism is quite complex, so I don't think it's a viable solution. Of course, please fill out a request for functionality with Adobe Adobe - feature request/Bug Report Form

• How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/

  Setting up substitute again tab

  After installing this extension, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab override and click the Options button. (See first screenshot attached).

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Success?

  Once you have set it as you wish, you can close the Add-ons page (or use the back button to return to the list of Extensions of this Options page).

• Appropriate use of the specific functions of IVI Driver

  Hello

  I have to call niDMM driver specific functions, for example the diode test function and source of current value. I am able to do using IVI step types. I just input function and the ID attribute of the niDMM header files. I would use the IVI drivers, but I need the specific functions of the device in some applications. I tested it and it works well, but is it the right way to do it? What is the recommended approach?

  My IVI not look like this when usig own functions and attributes: I don't like typing in numbers, but I've not found a way to use the header file definitions (see below).

  

  Diode test ID is defined by nidmm.h:

  #define NIDMM_VAL_FUNC_SPECIFIC_EXT_BASE IVIDMM_VAL_FUNC_SPECIFIC_EXT_BASE

  #define NIDMM_VAL_DIODE (NIDMM_VAL_FUNC_SPECIFIC_EXT_BASE-2L)

  defined by IviDmm.h

  #define IVIDMM_VAL_FUNC_SPECIFIC_EXT_BASE (1000L)

  Current source attribute ID is defined in nidmm.h:

  #define NIDMM_ATTR_BASE IVI_SPECIFIC_PUBLIC_ATTR_BASE

  #define NIDMM_ATTR_CURRENT_SOURCE (NIDMM_ATTR_BASE-25L) / * ViReal64 * /.

  ini.h:

  /*****************************************************************************/
  #define IVI_ATTR_BASE 1000000
  #define IVI_ENGINE_PRIVATE_ATTR_BASE (IVI_ATTR_BASE + 00000) / * base for private motor IVI attributes * /.
  #define IVI_ENGINE_PUBLIC_ATTR_BASE (IVI_ATTR_BASE + 50000) / * base for the public attributes of the IVI engine * /.
  #define IVI_SPECIFIC_PUBLIC_ATTR_BASE (IVI_ATTR_BASE + 150000) / * base for specific drivers public attributes * /.

  I prefer to use a code module and call the NIDMM functions in there. You can use the type rather than the identification number definitions.

• What does not restart in the FFT functions way?

  Hi all

  I would like to know what that "restart average" made for the FFT functions. According to aid,"reboot on average indicates if the VI restarts the process chosen medium." If restart on average is set to TRUE, the restart of the VI the selected with an average of process. If reboot on average is set to FALSE, the VI does not restart the process chosen sprawl. The default value is FALSE. When you call this VI for the first time, the averaging process restarts automatically. A typical case when you need to reboot on average is when a major change of entry occurs in the middle of the averaging process"

  I realized that the FFT function takes in an array of values and perform the FFT on it. If the FFT function keep a buffer previous values and clears when restart average = true? Because the FFT functions are not Point by point and they take both in all the data to deal with, "a major change of entry occurs in the middle of the averaging process" can be true?

  Thank you!

  Sigh.  I really tried to explain what was going on (probably) with this function, you use (and, I thought naively, you understand), but you got me wrong.

  

  This VI creates a zero average noise signal, providing 1024 points per second.  Do you know what should be the power spectrum of the signal?  Due to the randomness of the input signal, the power (for a small finished sample) spectrum will also have a random component.  If you had several ghosts of power on average, the average would begin to converge with the expected for random noise power spectrum.

  If you run this VI and look at the Spectra resulting (on average), you will notice that the first spectrum is the most "spice" and that spectra are averaged, the variation is reduced and diminishes the value of crete (shown by looking at the scale of Amplitude).  At any time, you can press "Reset average" and see this... reset the average, the following spectrum shows the growing nose, etc.

  It shows the right way to test the function of the power spectrum and discover what he does. My suggestion as to what makes this function seems to be largely correct.

  Bob Schor

• reset the boolean output when the elapsed time is reset

  Hello

  I used the function time successfully, but after a reset, the Boolean result is still high.

  Can someone tell me the best way to reset this please?

  Thank you very much

  OK - sorting, thank you

• Digital output frequency seems to be twice the frequency generated by the basic function generator

  Hi Labview forum,

  I wrote a program (attached) Labview to generate 3 PWM, square wave, signals that has the same frequency and phase delay right (so that when a signal is off, the other signal is lit. Then the next signal). Everything seems to work fine except that the frequency of the PWM signals generated seems twice as the frequency given to the basic function generator. Anyone have any idea why this is happening? Anyhelp would be greatly appreciated.

  Thank you!

  Totally agree with the advice of all GerdW than the hardware timing of your hardware DAQ will be much more reliable.  That said, part of what you are probably hitting is a little quirk of the primitive delay msec.   Requests for 1 msec have long been particularly little reliable (although they * seem * to have improved in recent years, probably due to the better OS support in Win 7 or something).

  I did minimal mods to your code with comments from you switch to a timed loop.  My quick test showed he is good enough to hit the 1 length of loop of target msec.

  -Kevin P