Text Fade In / Fade Out different in the timeline to export

Similar Questions

• Crawl song fade out before reaching the top of the screen

  Dear all,

  I would like the title of my working capital to continue rolling but I want it to fade out until it reaches the top of the screen.  It seems that I can do it quite easily in Final Cut Pro, but maybe I'm wrong.  In other words, the full title keeps rolling until the end, but vanishes each lines up before reaching the top of the screen and roll out of sight.  Any suggestions?  Work in Premiere Pro CC 2014 on a Mac.  Thank you.

  Add a linear wipe with a border of feathers for the title of working capital.

• Display text after an interval of time on the timeline

  Hi all

  I have an audio file on a drag and drop quiz. I want to display a text caption a few seconds after the end of the audio, I noticed that 'something' is a break from the game header before either for text captions. Is it possible that I have that works on a quiz slide / move.

  Thank you!

  Will try with an image. You do not change the point of suspension of the D & D, which is located at 1.5secs. For this reason only the audio never played before that the user has submitted the D & D. There is not need to slide that long either. I created this for you, and it works perfectly. Text with audio 2secs, I changed the suspension point of the D & D at 4secs. It's not because of me that the point of suspension does not appear in the timeline panel, I very much regret and recorded a feature request to make it visible.

  

• Create a new sequence of IN & OUT points on the timeline

  I have a timeline with 6 hours of footage of an event. I want to be able to go in this chronology and, say, choose a 30-minute section and copy it into a new sequence. Is there a way I can mark the points of entry and on the timeline and then copy some lies on the timeline to a new sequence?

  I hope that makes sense!

  Thank you

  MrD

  The source monitor is basically a chronology, then what is the advantage of navigation on the clip in the editing window? After filing your source of 6 hours sequence in the source monitor, you should be able to view all of your six hours and select for new sequencesand exit points. This will not change the original order of six hours.

  And as Ann has said, if you add historical markers for the sequence of 6 hours, you will see them as clip markers when you drop the sequence in the source monitor.

• Poor quality of the sound in the timeline and export; very well in the Source?

  Hi all.

  Newbie-Pr but experienced pro audio digital. I am confused and I know I am missing just something somewhere.

  I made a video for one of my songs. The graphics are quite (in AE), imported Pr and everything what is superb. I import the final audio mix and it sounds very poor quality when played the chronology and the final output, regardless of the format (I tried several presets and custom as well settings). I played a bit and noticed that the audio sounds fine when played in the Source window inside the Prime Minister.

  The session of Pr is comrised of 18 video tracks (not all playing at the same time, of course) and a stereo audio track.

  I tried to re - export audio from logic to depths of different bits, sampling frequencies and formats of file (mp3, wav, AAC, etc.) but the results are the same each time: Source (Pr) sounds very good, logic output sounds very well made / reading of the timeline looks very bad quality mp3 and produces final sounds just as bad.

  I tried everything I can think of. I hope one of you can show me what I'm missing.

  TIA!

  Mark

  First Pro CC

  Processor 2 x 2.8 GHz Quad-Core Intel Xeon

  Memory 8 GB 800 MHz DDR2 FB-DIMM

  Graphics  ATI Radeon HD 2600 XT 256 MB

  Software  OS X 10.9.1 (B 13, 42)

  Thanks for the reply!

  I lived the same results, no matter what I used the export settings. In addition, the poor quality of the sound was present in the timeline itself, without even exporting the project.

  Finally, I lifted my hands, has launched a completely new project, the same audio file in drugs... sounded good. Copied / pasted the video clips in the project original, broken and boom, everything is fixed. Yes, corrupted file Pr, it turns out. All I had to do was start a new project and import all the old components.

  I had to do that in logic a lot (more and more these days). I wish just that I had tried 10 hours earlier! HA.

  Anyway, problem solved and many thanks!

• Modification of ProRes clips in the timeline, then export > media such as ProRes: fact first re-compress the ProRes clips?

  To clarify: ye olde Final Cut Pro 7, you were editing ProRes clips and then get out a Quicktime with the appropriate settings, it would NOT re - compress the source ProRes, just copy > paste individual images into a new Quicktime (ProRes intra-image).

  In Premiere Pro, it export media in the same way, if your source clips are ProRes and you export a ProRes Quicktime? Or does do a re coverage - compress to ProRes from the timeline to create the new ProRes?

  Thanks in advance for any ideas.

  If you only cut or edit the clip, do any other changes (for example: do not add effects, etc) and then export to the same codec with the clip settings (rate, size of the image, etc.), then Yes. First will be smart make the clip. For the record, once you select the corresponding ProRes codec, you can click on Source corresponds to match the parameters.

  Once you add effects or set up an export setting unmatched (frame rate, etc.), then first you have to re - compress.

• flickering video in the timeline and export of first

  I called tech support, and they said Friday (07.18.2014) that they'd call me back Monday and then never heard back talking about them.

  In any case, I need to downgrade Adobe first CC2014 back to the previous version first, and do it immediately. The upgrade of CC CC2014 led video flicker in the timeline and final rendering, I can't understand what it is to say that he didn't do it until I upgraded.

  If someone can tell me how to revert to a more stable, lower, I would appreciate it. I don't want to use a crack and I pay for the service - I need this matter to be addressed immediately, or return to a stable version while I wait for them to make CC 2014 more stable. If my only choice is to use a crack, someone put it simply, and when upgrading to become more stable, I'll come back.

  So I was never really provided with a patch to do this, make just a workaround solution that really does conform to the outside to get a clean. They had me change my settings in sequence to 25 FPS (?), which I never thought to try it on my own because I don't shoot, edit or output in this environment. That said, if I change in a sequence of 25 FPS, but export at the 23.976 I draw, I get a clean record. This own rendering, however, happened only once, and I don't know if it's going to be consistent. The reason it works has never been quite clear to me.

  That said, I'm sticking with first CC for now, until Adobe can fix the software to work the way it's supposed to. I honestly don't expect this to be fixed, so it is next year before update. I have also received bad advice from the person running the twitter account (they told me I could "save under" to get a file off CC 2014 that would work in CC), and I lost about three days of work, trying to render less flicker (1.5 days trying to fix it myself and the other almost 1.5 days in total ", trying to get results out of technical support which has said they'd call back Monday, but never made).

  No shot right here, these are the facts. Buyer warned on upgrading... Make sure you have an installer backup to an earlier version if you want to try the upgrade.

  Finally, the link posted by John Smith does not work for the first time, although the link I posted in response to him, don't.

• Is it necessary to return the timeline before exporting?

  I read some people say in order to get a faster export, you need to make your timeline. I always thought that this is just the preview files and exports would use these files if you export directly from first. Am I wrong? ARN ' t these lower export anyway files? I'm down for any how speed up exports, but do not want to waste time on the provision of a timetable for 2 h if it does not actually using all.

  Thank you!

  It is not necessary.

  Rendering of previews can help speed up the export process, if you have the box checked Previews use.  However, once you add time to the previews at the time of export, it's a wash.  Which means you could theoretically get an export from 1 hour to 10 minutes, but it will take 50 minutes to render previews first.

  Most of the preview files are not a sufficient quality to be used for exports, so even if you don't usually want to use.  I would like to change that and could use your help...

  http://forums.Adobe.com/thread/1371240?TSTART=60

• Fade Out transition at the exit of the framework

  Hey guys,.

  Really quick questions.  When a button is clicked on the im of creating flash site, which links to the next page, IE portfolio comments/contact/etc...  I need the current movieclip fadeout framework, and then move to the next page.

  This is my code so far

  Stop(); imports import fl.transitions.Tween; Fl.transitions.easing import. *; Import fl.transitions.TweenEvent; the value of the alpha to 0 index_mc.alpha = 0; Code to animate the index page to fade in the var indexTween:Tween = new Tween (index_mc, "alpha", None.easeIn, 0, 1, 3, true); event for fadeout about.addEventListener (MouseEvent.CLICK, fadeOut) listener; function for fadeout and variable int fadeOut(e:MouseEvent):void {var alphaTweenOut:Tween = new Tween (index_mc, "alpha", None.easeOut, 1, 0, 3, true) ;} //listener buttons about.addEventListener (MouseEvent.CLICK, navigate);} contact.addEventListener (MouseEvent.CLICK, navigate); portfolio.addEventListener (MouseEvent.CLICK, navigate); Create a function for the navigation function navigate (evtObj:MouseEvent) {//create a trace trace ("the" + evtObj.target.name + "button was clicked!") in section //go clicked gotoAndStop (evtObj.target.name)}

  
  I created the function of fadeout and tween, but im not really sure where to go from there: s

  Any help would be great.

  See you soon

  Climo

  It should already do.  Read through what I have offered and try to see it.  You click any button will have his name stored in this variable, as well as your image tags are the names of button, the code should work for any of them.

• My photo slide show came out different than the original slideshow in Chrome and Firefox

  My main slideshow output differently Muse for Chrome/Firefox, but it seems OK in Safari. Uploaded images are those used in the screenshot of the Safari, but for some reason any that a green tint comes in addition to the presentation of Chrome/Firefox. How can I get rid of this?

  <-this is the Version of Chrome

  <-safari version

  Help, please!

  Can not say with certainty without the URL of the page, but the first thing I would check is that the color profile for the original JPG is sRGB.

• RH 8 HTML - fonts displayed in HS expansion out different from the font used to create

  In RH 8 when I use a DHTML hotspot in expansion, the selected font that I use to put some text in the box is not the text that appears when I generate the output.

  I just use 12pt Verdana, and that's what I see in the output.

  until the owner of the document submitted for review

  It doesn't matter what I do to change the font - type, size or any other attribute.  When I save the project and regenerate it, it looks the same.  "Is there something that.

  I don't understand?  I'd like to see a correct output in HTML 7 HR.  Thanks in advance.

  VIC

  Hello

  You probably need to change your style sheet. Open the Styles Editor and search for Drop Down text. When I looked at mine, I saw the expansion text and it has been formatted as you listed it above.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Fade out doesn't show when you export as a JPEG sequence?

  I export my video as a jpeg sequence because I can't get rid of artifacts when exporting in format .mov, no matter how much I mess with the settings. The JPEG sequence works fine the only problem is that the fadeouts in the video are not displayed. Someone knows how to change that?

  Or how to get the video export to a file .mov without artifacts otherwise in addition to change quicktime settings.

  JPEG files don't support transparency.

  use the png or gif.

• Time out function on the timeline...

  Hi all!

  can someone help me with script for a time-out on my calendar feature?

  I have some tasks in my scenario where I want a timeout to happen after 5 seconds the user click anywhere or do anything.

  I am familiar with mouse functions listener... but they only use them for something that I would do the time-out after a predetermined time already...

  Thanks for any help.

  Pat

  imports must be placed at the top of your codes. Sorry also forgot to tell you that you must activate the timer by calling the setUserActivityTimeout function whenever you intend to start checking for the activity of the user. Then, each mouse click resets the timer. If no more clicks are detected after the last click (in 5 sec), it calls onUserInactivity, which will remove the _root.onMouseDown Manager so that the timer is not recalled when clicked. But you can re - activate the timer by setting his manager with setUserActivityTimeout.

  Import mx.utils. Delegate; Should be at the top of the code

  var nTimeoutId:Number;

  var nTimeTolerance:Number = 5000; timeout of 5 seconds

  _root. OnMouseDown = Delegate.create (this, setUserActivityTimeout);

  setUserActivityTimeout ( ); Activate the timer

  function setUserActivityTimeout(): Void

  {

  clearTimeout() (nTimeoutId);

  nTimeoutId = setTimeout (delegate.create (this, onUserInactivity), nTimeTolerance);

  }

  function stopTimer(): Void

  {

  clearTimeout() (nTimeoutId);

  }

  function onUserInactivity(): Void

  {

  Delete, and then redefine it again if you want to activate again

  delete _root.onMouseDown;

  gotoAndStop ("exit_no");

  }

• Why the sound is different when the project is exported?

  Hi all. It's me again. Because you are always so useful, I need your help with another problem. I just finished a wedding, publishing and towards the end of the ceremony, the sound is fine when you work in Final Cut, but when I export, the game becomes heavy and distorted. Any suggestions on why this is happening and what to do? I've never had this happen before. It is a client, and to do here tomorrow afternoon at the latest. Thanks for your help!

  We have seen that this several times here on the forum but it's never happened to me. I believe that the proposed solution was to remove the shape clip your scenario and replace it form the browser; Make sure that the audio in the browser reference file is good before do you. You can export a range of test history.

  You can also try to delete the files of the project.

  It may take a few hours more for fans to offer other suggestions.

• Fade out effect when you change screens

  Hello world

  I have a screen (the sheet object) with some objects (labels, imageButton, etc.) and I need to change its background of fadeing effect, and if it is possible do not change objects.

  One of the ways I see to create a new page with the same elements, but I couldn't find how to change an effect that will use the system of switching screens.

  All advice?

  You can use a docklayout for this. Place a container at the bottom with the desired backgroundcolor. Put from another container on top of that with the controls of your choice. After that, you can disappear or fade in the container with backgroundcolor as you want by changing the opacity. In your case, you must use an explicit animation (https://developer.blackberry.com/cascades/documentation/ui/animations/explicit_animations.html). Fade out background, when the signal that the background is dimmed, change the background color and fade in.