Text to create a point of entry in OTL create time card page.

Similar Questions

• slideshow of the entire width of the images and text with switch small points

  Hi!, I'm going crazy trying to do something I think should be really easy and simple:

  a full-width or full-screen composition or a slideshow of images and text with little switch points instead of thumbnails.

  I guess everyone nows what I'm talking about... because all of a sudden he's everywhere!

  
  Something like this QooQee model: http://www.qooqee.com/templates/sense/sense-qooqee-slideshow.html

  I tried the compositions, but they cannot be expanded full-width...

  then I tried to slide shows, but they do not have triggers... they have thumbnails...
  I tried to fill points picture slideshow thumbnails too (I know that is not the best way to do this, but...). He did not, the filling will not appear unless I low opacity... Why is this?

  I also noticed that the example of sense QooQee is something complicated... text is displayed as 'on-off', but images do their entry by a transition melted... are you looking for they combining 2 widgets for this?

  Any help is appreciated! : )

  Hello

  What you're trying to achieve is possible in the Muse by using the Fullscreen Slideshow option.

  I created a video showing how it can be done. Please download it using this link:- http://adobe.ly/1mp5X84

  Please let me know if this worked for you.

  Kind regards

  Rohit Nair

• MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more

  My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.

  I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.

  Any thoughts on how to solve this problem?

  Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...

  I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry

  Now it does not work for everyone but I fixed it on my machine with the following

  now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type

  in my machine's plug

  Reference Dell d6420

  Win7

  Msoft word 2007

  printer itself is

  HP laserjet 200 color m276

  printer driver is

  HP LaserJet 200 color MFP M276 PCL 6

  I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you

  If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Running the background (sms listening thread) connected to the GUI (another point of entry) application thread

  Hi, I'm new to the development of Blackberry, I read everything on the application running at startup and have a different point of entry for this application. I still need help with my application

  I use BB JDE 4.7

  Simulator: BB 9530 4.7.0

  I'm developing an application of SMS. (extends UiApplication)

  1) there is a thread that listens for incoming messages

  2) there is a wire which is a SMS sender

  3) there is a main screen and two full screens. for example, when the user clicks a button in one of the screens full... I send you a message

  (4) when a message is received, based on the content of the message I push either a full screen

  (5) I have, all the wires and screens as the class internal to the main class that extends from the UiApplication.

  I got the basic features. I need help making that demand the application of autostartup

  (1) I need to start listening to the sms thread when the BB phone starts

  (2) I need to have the application icon in the applications screen as another entry point for the application (only for the GUI), and the listening thread must remain active in the background.

  (3) when an incoming message is detected, the application GUI should be brought to the foreground (if it isn't already forground) after posting a popup (instead of bring the application to the foreground, is it better to display a flashing icon in the status bar of the home screen blackberry and perhaps global popup)

  (4) when the GUI of the application part is closed, I need to stop the sms sending thread, and when the system shuts down, I need to stop the listening thread.

  Please help me guys... I have read many articles and discussions regarding the automatic start-up of applications, another point of entry, the # of background threads...

  but I couldn't find how to implement my needs.

  (1) should I need to create two different projects (applications [GUI thread, a sender] and one for the listening thread)? or I can achieve in single application?

  (2) should I have to sign in the background thread to the GUI app? If so, how?

  (3) it is necessary to use the RunTimeStore object? If so, I don't know how I can bring to the foreground the application GUI of the background thread.

  (4) if I have to stop the thread of listening by overiding onExit() method, the important question I have is, if the onExit() method is only for applications that extends from the Application class and not for the UiApplication class?

  (5) if I should have two projects (one main and the other as a spare point entry), which project should I do as "autorun at startup" and a "system module".

  As I need to have the background still running thread when the GUI application is active. I don't know how I do.

  Hello world...

  I reached my needs thanks to a single application. I used an other entry point.

  To refer to chk my other post

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-avoid-creating-two-instances-of-the-a...

• Can I launch multiple points of entry from a ThinApp shortcut?

  Hi all

  I'm packing a call Team Viewer application. How does traditional enforcement work is a little strange. It requires that you run an executable file to use the software, but an additional executable if you want to run the management console. This is necessary because the management console is responsible for logging and others.

  When I package the application with ThinApp I get two entry points. What I want to do is to create a single entry that launches two executables at the same time (or sequence). In fact, I would prefer that the GPMC open and reduced to a minimum, but that part is not critical.

  Does anyone have suggestions as to how I might accomplish this? I tried to add the two executable files to a single point of entry like this:

  http://team Viewer.exe

  Shortcut = TeamViewer.dat

  Source=%ProgramFilesDir%\TeamViewer\Team Viewer.exe

  Source=%ProgramFilesDir%\TeamViewer\Team Viewer Manager.exe

  When I do this no error is thrown, but only Team Viewer Manager.exe is started. If I change to:

  http://team Viewer.exe

  Shortcut = TeamViewer.dat

  Source=%ProgramFilesDir%\TeamViewer\Team Viewer Manager.exe

  Source=%ProgramFilesDir%\TeamViewer\Team Viewer.exe

  only then the team Viewer.exe is launched.

  Thanks in advance for your suggestions!

  ~ spence

  You can accomplish this by including a VBScript with your package. The entry point would be for Team Viewer, the VBScript code accompanying the package ThinApp will then launch the management console. See http://pubs.vmware.com/thinapp4/help/wwhelp/wwhimpl/js/html/wwhelp.htm?href=scripts_using.html for more information on the use of scripts with ThinApp.

• Skype error: "Skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport...". »

  Sorry for the ridiculously long title, but that is exactly the error I get.  When I contacted my friends @ Skype that they just told me it's associated windows problem.  I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...

  Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.

  Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question.  It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.

  Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted.  Again, try if you wish.  When you uninstall Skype, you will not lose your contacts.

  Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung.  You have this installed on your system?  If so (or even if not), go to C:\Windows\system32 and rename avrt.dll.  You can call it avrt.dlX or something else you like.  Reset.  Let us know if that fixes the problem.  If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).

  Reference: http://forum.renoise.com/index.php?/topic/31412-solved-ntdlldll-ntalpcsendwaitreceiveport-error-on-startup/

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• .exe error] is not found the procedure entry point AddAtomW Entry Point not found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I have

  Original title: [ProgramName] .exe Entry Point not found

  I get this message: the point procedure entry AddAtomW could not be found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I don't know what to do. Help please!

  Hello

  1. did you of recent changes on the computer?

  Method 1:
   
  It is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you put the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  See the link below to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  (a) click Start, type msconfig in the search box and press ENTER.
  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  (c) under the general tab, click the Normal startup option, and then click OK.
  (d) when you are prompted to restart the computer, click on restart.

  Method 2:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Error, "the point procedure entry SUnMapLS_IP-EBP_28 be found in the dynamic library KERNEL32.dll." during installation "manufacturer of T-Shirt Hanes.

  Original title: Point of entry not found

  I'm trying to run an old program, Manufacturer of T-Shirt Hanesand get the error, "the entry point of procedure SUnMapLS_IP-EBP_28 not found in KERNEL32.dll dynamic link library.
  I'm running Vista 32 bit.
  Any help would be greatly appreciated.

  Hello

  1 see if that helps you.

  Right-click on the setup.exe > and then select run as administrator to install it.

  2. ask the manufacturer to program if it is Vista Compatible.

  We can not help you with that that Microsoft no longer has the link Vista Compatibility Center available.

  3. If the program is not Compatible Vista, install in Windows Compatibility Mode

  "Using Windows 7 or Vista Compatibility Mode.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  See you soon.

• Thread in another point of entry of spawning

  I'm looking to develop an application that has a background service and a front end GUI (2 points of entry).  I understand how to have a runtime shared store so that the GUI can access data/events from the basic service.  But how do I generate a thread in the background entrypoint, while in the entrypoint GUI.  Should I call app.invokeLater () on the background application?  Is - illegal to do if you're not in the context of this application?

  Send your background request a notification using the global event.

  invokelater on the instance of the application should also work, but seems a little dirty to me

• Iexplore.exe: point of entry not found

  Hello

  I tried to fix this error: " iexplore.exe: point of entry not found." The procedure entry point SpoolerInit be found in the dynamic link WINSPOOL library. DRV "but could not find anything useful. He was 4-5 months because I'm having this error message appears whenever I start my laptop. It would really help if someone help me with this. I use Windows 7.

  Thank you!

  Frozen5

  Original title: iexplore.exe error

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing this problem, for some time.

  I'll try my best to help you in the matter of fixing.

  But I would like to know some information to help you better.

  (1) where do you get this error message?

  (2) that you get this message while accessing any program or Internet Explorer?

  (3) don't you make changes before this problem?

  (4) have you any questions of access to the Internet through Internet Explorer?

  At the same time, I suggest you follow the following suggestions to solve the problem.

  Method 1: I wish that you start the computer in safe mode and then try to check the question because, in safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started.

  Step 1: See the link to start in safe mode.

  Startup options (including safe mode).

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If you are able to turn off the computer in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair .

  Additional information:

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  I hope this helps. Otherwise, feel free to write us again with the required information and we will be happy to help you.

  Thank you

• Bb-ant-tool to implement using point of entry

  Hello

  I am able to build one application to another point of entry with JDE...

  But does require no special configuration if I use bb-ant-tool to build?

  Problem solved.

  http://BB-Ant-tools.sourceforge.NET/docs

• I am trying to create dynamic landing pages that reflect the locations of my Google ads. How can I create a dynamic text on my landing page to specify the location in the title?

  I am trying to create dynamic landing pages that reflect the locations of my Google ads. How can I create a dynamic text on my landing page to specify the location in the title?

  Thanks a lot for your answer. I've sorted it now.

  Kind regards

  Gill

• Masking of the Format of the text in Oracle forms point

  Hello Experts, I use forms of oracle 11 g with windows 7.i do a text field for an account (with a length of 10-digit) number. That when I type the entry number (assume it is a length of 8 digits), there is a prefix (two zeros according to fill the maximum length of the text box counts) added to the entry. I did this using a logic in pl/sql, but I want to know that it is a built-in function or any other feature of pl/sql in oracle for this feature. thnk you.

  Hello

  go to the range of the property account number and select format mask enter 10 zeros (ie) "0000000000".  Then your problem will be solved.

  In sql, you can use the lpad function integrated to perform the above task.

  Example:

  Select LPAD (12345678,10,0) double acc_no;

  OUTPUT

  Acc_no

  ----------------

  0012345678