view iBooks after update

Similar Questions

• Team Viewer crashes after update 11/11/15

  FYI after execution of updates today, Team Viewer crashes at launch.

  Name: APPCRASH application name: TeamViewer.exe Application Version: 10.0.47484.0...

  I have this resolved for now by running the system restore and have opened a support ticket with Team Viewer for them to consider.

  I'm writing this for the benefit of third parties who may run into this.  I will you update when Team Viewer responds.

  I received the following response today from Team Viewer

  "Thank you for your message. Windows has released another update to correct the problem.

  Could you please update Windows with the latest version and try again?

  If the problem persists after the update, feel free to contact us again. »

  I have conducted an audit of the updates refresh the list pending and then ran 25 updates.  This time, they do not cause a problem with team Viewer.

  I suspect that the problem was in KB3097877 that caused other issues.

  Fix security Microsoft reissues after reports of bugs, crashes

  http://www.ZDNet.com/article/Outlook-crashing-after-Windows-security-updates-you-are-not-alone/

• There is no such thing as a black line on the content of folio in the viewer adobe after update.

  Several days after an update of a shared folio in the viewer Adobe (iPad Retina), there is a black line on the content on the right side of the screen (possibly a the scroll bar that no scrolling). There was also a notification that an update was available (downloaded very quickly, no updates had been pushed in days). This line does not exist when you use the Office Viewer, non-retine iPad or iPhone.

  Please see other threads on the subject.

  It is currently under review

  This seems to be a problem with Content Viewer (v32.5) in the App Store.

  If I build one from the App 32.4.4 Constructor (same v32.5), the bar is in its original position.

  Not a solution, but could be a workaround for some until this problem is corrected.

• How to get back to save after update (IE add a url to the variable)

  I want to put a link to return to the page view record after update.  I followed the insrtuctio Dreamweaver one added after the url of the page in the update behaviors:

  ? recordID = <? PHP echo $row_ recordsetName [' fieldName '];? >

  However, the page does not load, but gives this error:

  Parse error: syntax error, unexpected T_ENCAPSED_AND_WHITESPACE, expected T_STRING or T_VARIABLE or T_NUM_STRING in C:\UwAmp\www\testmypms\update_spec_rx.php on line 77

  Here is the code in the page:

  <? php require_once('Connections/testmypms.php');? >

  <? PHP

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  $theValue = (! get_magic_quotes_gpc())? addslashes ($TheValue): $theValue;

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? « " ». doubleVal ($TheValue). "" "": "NULL";

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  $editFormAction = $_SERVER ['PHP_SELF'];

  If (isset {}

  $editFormAction. = « ? ». htmlentities($_SERVER['QUERY_STRING']);

  }

  If ((isset($_POST["MM_update"])) & & ($_POST ["MM_update"] == "updateSpecRx")) {}

  $updateSQL = sprintf ("UPDATE spec_rx SET spec_rx_date = %s FK_user_id = %s spec_rx_rsph = %s, spec_rx_rcyl = %s, spec_rx_raxis = %s, spec_rx_rhprism = %s, spec_rx_rhprismbase = %s, spec_rx_rvprism = %s, spec_rx_rvprismbase = %s, spec_rx_rnadd = %s, spec_rx_rnhprism = %s, spec_rx_rnhprismbase = %s, spec_rx_rnvprism = %s spec_rx_rnvprismbase = %s spec_rx_rintadd = %s spec_rx_rinthprism = %s, spec_rx_rinthprismbase = %s, spec_rx_rintvprism = %s, spec_rx_rintvprismbase = %s, spec_rx_lsph = %s, spec_rx_lcyl = %s, spec_rx_laxis = %s, spec_rx_lhprism = %s, spec_rx_lhprismbase = %s, spec_rx_lvprism = %s, spec_rx_lvprismbase = %s, spec_rx_lintadd = %s, spec_rx_linthprism = %s, spec_rx_linthprismbase = %s spec_rx_lintvprism = %s spec_rx_lintvprismbase = %s spec_rx_lnadd = %s, spec_rx_lnhprism = %s, spec_rx_lnhprismbase = %s, spec_rx_lnvprism = %s spec_rx_lnvprismbase = %s ext_rx = %s spec_rx_id = %s WHERE',

  GetSQLValueString ($_POST ['rHprism'], 'day'),

  GetSQLValueString ($_POST ["userID"], "int").

  GetSQLValueString ($_POST ['rsph'], "double").

  GetSQLValueString ($_POST ['rcyl'], "double").

  GetSQLValueString ($_POST ['raxis'], "double").

  GetSQLValueString ($_POST ['rHprism'], "double").

  GetSQLValueString ($_POST ['rHprismbase'], "text").

  GetSQLValueString ($_POST ['rVprism'], "double").

  GetSQLValueString ($_POST ['rVprismbase'], "text").

  GetSQLValueString ($_POST ['rNradd'], "double").

  GetSQLValueString ($_POST ['rNrHprism'], "double").

  GetSQLValueString ($_POST ['rNrHprismbase'], "text").

  GetSQLValueString ($_POST ['rNrVprism'], "double").

  GetSQLValueString ($_POST ['rNrVprismbase'], "text").

  GetSQLValueString ($_POST ['rIntadd'], "double").

  GetSQLValueString ($_POST ['rIntHprism'], "double").

  GetSQLValueString ($_POST ['rIntHprismbase'], "text").

  GetSQLValueString ($_POST ['rIntVprism'], "double").

  GetSQLValueString ($_POST ['rIntVprismbase'], "text").

  GetSQLValueString ($_POST ['lsph'], "double").

  GetSQLValueString ($_POST ['lcyl'], "double").

  GetSQLValueString ($_POST ["'laxis"], "double").

  GetSQLValueString ($_POST ['lHprism'], "double").

  GetSQLValueString ($_POST ['lHprismbase'], "text").

  GetSQLValueString ($_POST ['lVprism'], "double").

  GetSQLValueString ($_POST ['lVprismbase'], "text").

  GetSQLValueString ($_POST ['lIntadd'], "double").

  GetSQLValueString ($_POST ['lIntHprism'], "double").

  GetSQLValueString ($_POST ['lIntHprismbase'], "text").

  GetSQLValueString ($_POST ['lIntVprism'], "double").

  GetSQLValueString ($_POST ['lIntVprismbase'], "text").

  GetSQLValueString ($_POST ['lNradd'], "double").

  GetSQLValueString ($_POST ['lNrHprism'], "double").

  GetSQLValueString ($_POST ['lNrHprismbase'], "text").

  GetSQLValueString ($_POST ['lNrVprism'], "double").

  GetSQLValueString ($_POST ['rNrVprismbase'], "text").

  GetSQLValueString (isset($_POST['extRx'])? ('true': ' ', 'definition', '1', '0').

  GetSQLValueString ($_POST ['SpecRxID'], "int"));

  @mysql_select_db ($database_testmypms, $testmypms);

  $Result1 = mysql_query ($updateSQL, $testmypms) or die (mysql_error ());

  $updateGoTo = "spec_rx4.php";

  If (isset {}

  $updateGoTo. = (strpos ($updateGoTo, '?'))? « & » : « ? » ;

  $updateGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $updateGoTo));

  }

  / * date_default_timezone_set('Europe/London');

  $date = strtotime($_POST['specRxDate']);

  $_POST ['specRxDate'] = date("Y-m-d",$date); */

  $currentPage = $_SERVER ['PHP_SELF'];

  $maxRows_spec_rx = 1;

  $pageNum_spec_rx = 0;

  If (isset($_GET['pageNum_spec_rx'])) {}

  $pageNum_spec_rx = $_GET ['pageNum_spec_rx'];

  }

  $startRow_spec_rx = $pageNum_spec_rx * $maxRows_spec_rx;

  $colname_spec_rx = "1";

  If (isset($_GET['spec_RxID'])) {}

  $colname_spec_rx = (get_magic_quotes_gpc())? $_GET ['spec_RxID']: addslashes($_GET['spec_RxID']);

  }

  @mysql_select_db ($database_testmypms, $testmypms);

  $query_spec_rx = sprintf ("SELECT demographics.px_id, demography. FK_title_id, demographics.firstname, demographics.surname, title.title, title.title_id, spec_rx.spec_rx_id, spec_rx. FK_px_id, DATE_FORMAT (spec_rx.spec_rx_date, ' % d-% m-% Y') as formatted_rx_date, spec_rx. FK_user_id, spec_rx.spec_rx_rsph, spec_rx.spec_rx_rcyl, spec_rx.spec_rx_raxis, spec_rx.spec_rx_rhprism, spec_rx.spec_rx_rhprismbase, spec_rx.spec_rx_rvprism, spec_rx.spec_rx_rvprismbase, spec_rx.spec_rx_rnadd, spec_rx.spec_rx_rnhprism, spec_rx.spec_rx_rnhprismbase, spec_rx.spec_rx_rnvprism, spec_rx.spec_rx_rnvprismbase, spec_rx.spec_rx_rintadd, spec_rx.spec_rx_rinthprism, spec_rx.spec_rx_rinthprismbase spec_rx.spec_rx_rintvprism, spec_rx.spec_rx_rintvprismbase, spec_rx.spec_rx_lsph, spec_rx.spec_rx_lcyl, spec_rx.spec_rx_laxis, spec_rx.spec_rx_lhprism, spec_rx.spec_rx_lhprismbase, spec_rx.spec_rx_lvprism, spec_rx.spec_rx_lvprismbase, spec_rx.spec_rx_lintadd, spec_rx.spec_rx_linthprism, spec_rx.spec_rx_linthprismbase, spec_rx.spec_rx_lintvprism, spec_rx.spec_rx_lintvprismbase, spec_rx.spec_rx_lnadd, spec_rx.spec_rx_lnhprism spec_rx.spec_rx_lnhprismbase, spec_rx.spec_rx_lnvprism, spec_rx.spec_rx_lnvprismbase, spec_rx.ext_rx FROM spec_rx, demographics, title WHERE spec_rx.spec_rx_id = %s AND spec_rx. FK_px_id = demographics.px_id AND demography. (FK_title_id = title.title_id", $colname_spec_rx);

  $query_limit_spec_rx = sprintf ("%s LIMIT %d, %d", $query_spec_rx, $startRow_spec_rx, $maxRows_spec_rx);

  $spec_rx = mysql_query ($query_limit_spec_rx, $testmypms) or die (mysql_error ());

  $row_spec_rx = mysql_fetch_assoc ($spec_rx);

  If (isset($_GET['totalRows_spec_rx'])) {}

  $totalRows_spec_rx = $_GET ['totalRows_spec_rx'];

  } else {}

  $all_spec_rx = mysql_query ($query_spec_rx);

  $totalRows_spec_rx = mysql_num_rows ($all_spec_rx);

  }

  $totalPages_spec_rx = ceil($totalRows_spec_rx/$maxRows_spec_rx)-1;

  @mysql_select_db ($database_testmypms, $testmypms);

  $query_users = "SELECT users.user_id, users.username FROM users";

  $users = mysql_query ($query_users, $testmypms) or die (mysql_error ());

  $row_users = mysql_fetch_assoc ($users);

  $totalRows_users = mysql_num_rows ($users);

  $queryString_spec_rx = "";

  If (! empty($_SERVER['QUERY_STRING'])) {}

  $params = explode ("&", $_SERVER ['QUERY_STRING']);

  $newParams = array();

  {foreach ($params as $param)

  If (stristr ($param, "pageNum_spec_rx") == false & &)

  stristr ($param, "totalRows_spec_rx") == false) {}

  return ($newParams, $param);

  }

  }

  If (count ($newParams)! = 0) {}

  $queryString_spec_rx = '& '. htmlentities (implode ("&", $newParams));

  }

  }

  $queryString_spec_rx = sprintf ("& totalRows_spec_rx = %d %s", $totalRows_spec_rx, $queryString_spec_rx);

  ? >

  < ! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN" "http://www.w3.org/TR/html4/loose.dtd" > ""

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 ">"

  < title > change Rx Spec < /title >

  < / head >

  < body >

  < p > modify Spec Rx < /p >

  < p > <? PHP echo $row_spec_rx ["px_id"];? > < / p >

  < p > <? PHP echo $row_spec_rx ['title'];? > <? PHP echo $row_spec_rx ["FirstName"];? > <? PHP echo $row_spec_rx ['name'];? > < / p >

  < form action = "<?" PHP echo $editFormAction;? ">" method = "POST" name = "updateSpecRx" id = "updateSpecRx" >

  < table border = "1" cellpadding = "5" cellspacing = "1" >

  < b >

  < td > < table >

  < td >

  < td > <? php date_default_timezone_set('Europe/London');? >

  < input name = "specRxDate" type = "text" id = "specRxDate" value = "<?" PHP echo $row_spec_rx ["formatted_rx_date"];? ">" size = "10" maxlength = "10" <? PHP echo "value ="'.date("d-m-Y"). "" » ' ; ? > > < table >

  < td > < input name = "SpecRxID" type = "text" id = "SpecRxID" value = "<?" PHP echo $row_spec_rx ["spec_rx_id"];? ">" size = "2" maxlength = "2" > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < /tr >

  < b >

  < td > < table >

  SPH < td > < table >

  Cyl < td > < table >

  Axis of < td > < table >

  HPrism < td > < table >

  HPrismBase < td > < table >

  VPrism < td > < table >

  VPrismBase < td > < table >

  NrAdd < td > < table >

  NrHPrism < td > < table >

  NrHPrismBase < td > < table >

  NrVPrism < td > < table >

  NrVPrismBase < td > < table >

  IntAdd < td > < table >

  IntHPrism < td > < table >

  IntHPrismBase < td > < table >

  IntVPrism < td > < table >

  IntVPrismBase < td > < table >

  < /tr >

  < b >

  < td > < table > R

  < td > < input name = "rsph" type = "text" id = "rsph" value = "<?" PHP echo $row_spec_rx ["spec_rx_rsph"];? ">" size = "6" maxlength = "6" >

  < table >

  < td > < input name = "rcyl" type = "text" id = "rcyl" value = "<?" PHP echo $row_spec_rx ["spec_rx_rcyl"];? ">" size = "6" maxlength = "6" >

  < table >

  < td > < input name = "raxis" type = "text" id = "raxis" value = "<?" PHP echo $row_spec_rx ["spec_rx_raxis"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < input name = "rHprism" type = "text" id = "rHprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_rhprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "rHprismbase" id = "rHprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_rhprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'OUT' <? PHP if (!) () strcmp ("OUT", $row_spec_rx ['spec_rx_rhprismbase']))) {echo "SELECTED" ;}? > > OUT </option >

  < option value = 'IN' <? PHP if (!) () strcmp ("IN", $row_spec_rx ['spec_rx_rhprismbase']))) {echo "SELECTED" ;}? > > IN </option >

  < / select > < table >

  < td > < input name = "rVprism" type = "text" id = "rVprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_rvprism"];? ">" Size = "5" maxlength = "5" >

  < table >

  < td > < select name = "rVprismbase" id = "rVprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_rnvprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'UP' <? PHP if (!) () strcmp ("UP", $row_spec_rx ['spec_rx_rnvprismbase']))) {echo "SELECTED" ;}? > > UP </option >

  < option value = "DN" <? PHP if (!) () strcmp ("DN", $row_spec_rx ['spec_rx_rnvprismbase']))) {echo "SELECTED" ;}? > > DN </option >

  < / select > < table >

  < td > < input name = "rNradd" type = "text" id = "rNradd" value = "<?" PHP echo $row_spec_rx ["spec_rx_rnadd"];? ">" size = "6" maxlength = "6" > < table >

  < td > < input name = "rNrHprism" type = "text" id = "rNrHprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_rnhprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "rNrHprismbase" id = "rNrHprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_rnhprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'OUT' <? PHP if (!) () strcmp ("OUT", $row_spec_rx ['spec_rx_rnhprismbase']))) {echo "SELECTED" ;}? > > OUT </option >

  < option value = 'IN' <? PHP if (!) () strcmp ("IN", $row_spec_rx ['spec_rx_rnhprismbase']))) {echo "SELECTED" ;}? > > IN </option >

  < / select > < table >

  < td > < input name = "rNrVprism" type = "text" id = "rNrVprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_rnvprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "rNrVprismbase" id = "rNrVprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_rnvprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'UP' <? PHP if (!) () strcmp ("UP", $row_spec_rx ['spec_rx_rnvprismbase']))) {echo "SELECTED" ;}? > > UP </option >

  < option value = "DN" <? PHP if (!) () strcmp ("DN", $row_spec_rx ['spec_rx_rnvprismbase']))) {echo "SELECTED" ;}? > > DN </option >

  < / select > < table >

  < td > < input name = "rIntadd" type = "text" id = "rIntadd" value = "<?" PHP echo $row_spec_rx ["spec_rx_rintadd"];? ">" size = "6" maxlength = "6" > < table >

  < td > < input name = "rIntHprism" type = "text" id = "rIntHprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_rinthprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "rIntHprismbase" id = "rIntHprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_rinthprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'OUT' <? PHP if (!) () strcmp ("OUT", $row_spec_rx ['spec_rx_rinthprismbase']))) {echo "SELECTED" ;}? > > OUT </option >

  < option value = 'IN' <? PHP if (!) () strcmp ("IN", $row_spec_rx ['spec_rx_rinthprismbase']))) {echo "SELECTED" ;}? > > IN </option >

  < / select > < table >

  < td > < input name = "rIntVprism" type = "text" id = "rIntVprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_rintvprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "rIntVprismbase" id = "rIntVprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_rintvprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'UP' <? PHP if (!) () strcmp ("UP", $row_spec_rx ['spec_rx_rintvprismbase']))) {echo "SELECTED" ;}? > > UP </option >

  < option value = "DN" <? PHP if (!) () strcmp ("DN", $row_spec_rx ['spec_rx_rintvprismbase']))) {echo "SELECTED" ;}? > > DN </option >

  < / select > < table >

  < /tr >

  < b >

  < td > < table > L

  < td > < input name = "lsph" type = "text" id = "lsph" value = "<?" PHP echo $row_spec_rx ["spec_rx_lsph"];? ">" size = "6" maxlength = "6" >

  < table >

  < td > < input name = "lcyl" type = "text" id = "lcyl" value = "<?" PHP echo $row_spec_rx ["spec_rx_lcyl"];? ">" size = "6" maxlength = "6" >

  < table >

  < td > < input name = "laxis" type = "text" id = "laxis" value = "<?" PHP echo $row_spec_rx ["spec_rx_laxis"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < input name = "lHprism" type = "text" id = "lHprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_lhprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "lHprismbase" id = "lHprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_lhprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'OUT' <? PHP if (!) () strcmp ("OUT", $row_spec_rx ['spec_rx_lhprismbase']))) {echo "SELECTED" ;}? > > OUT </option >

  < option value = 'IN' <? PHP if (!) () strcmp ("IN", $row_spec_rx ['spec_rx_lhprismbase']))) {echo "SELECTED" ;}? > > IN </option >

  < / select > < table >

  < td > < input name = "lVprism" type = "text" id = "lVprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_lvprism"];? ">" Size = "5" maxlength = "5" >

  < table >

  < td > < select name = "lVprismbase" id = "lVprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_rvprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'UP' <? PHP if (!) () strcmp ("UP", $row_spec_rx ['spec_rx_rvprismbase']))) {echo "SELECTED" ;}? > > UP </option >

  < option value = "DN" <? PHP if (!) () strcmp ("DN", $row_spec_rx ['spec_rx_rvprismbase']))) {echo "SELECTED" ;}? > > DN </option >

  < / select > < table >

  < td > < input name = "lNradd" type = "text" id = "lNradd" value = "<?" PHP echo $row_spec_rx ["spec_rx_lnadd"];? ">" size = "6" maxlength = "6" > < table >

  < td > < input name = "lNrHprism" type = "text" id = "lNrHprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_lnhprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "lNrHprismbase" id = "lNrHprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_lnhprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'OUT' <? PHP if (!) () strcmp ("OUT", $row_spec_rx ['spec_rx_lnhprismbase']))) {echo "SELECTED" ;}? > > OUT </option >

  < option value = 'IN' <? PHP if (!) () strcmp ("IN", $row_spec_rx ['spec_rx_lnhprismbase']))) {echo "SELECTED" ;}? > > IN </option >

  < / select > < table >

  < td > < input name = "lNrVprism" type = "text" id = "lNrVprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_lnvprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "rNrVprismbase" id = "rNrVprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_lnvprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'UP' <? PHP if (!) () strcmp ("UP", $row_spec_rx ['spec_rx_lnvprismbase']))) {echo "SELECTED" ;}? > > UP </option >

  < option value = "DN" <? PHP if (!) () strcmp ("DN", $row_spec_rx ['spec_rx_lnvprismbase']))) {echo "SELECTED" ;}? > > DN </option >

  < / select > < table >

  < td > < input name = "lIntadd" type = "text" id = "lIntadd" value = "<?" PHP echo $row_spec_rx ["spec_rx_lintadd"];? ">" size = "6" maxlength = "6" > < table >

  < td > < input name = "lIntHprism" type = "text" id = "lIntHprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_linthprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "lIntHprismbase" id = "lIntHprismbase" >

  < option value = "" > < / option >

  < option value = 'OUT' > ON < / option >

  < option value = 'IN' > IN < / option >

  < / select > < table >

  < td > < input name = "lIntVprism" type = "text" id = "lIntVprism" value = "<?" PHP echo $row_spec_rx ["spec_rx_lintvprism"];? ">" Size = "5" maxlength = "5" > < table >

  < td > < select name = "lIntVprismbase" id = "lIntVprismbase" >

  < option value = "" <? " PHP if (!) () strcmp ("", $row_spec_rx ['spec_rx_lintvprismbase']))) {echo "SELECTED" ;}? > > < / option >

  < option value = 'UP' <? PHP if (!) () strcmp ("UP", $row_spec_rx ['spec_rx_lintvprismbase']))) {echo "SELECTED" ;}? > > UP </option >

  < option value = "DN" <? PHP if (!) () strcmp ("DN", $row_spec_rx ['spec_rx_lintvprismbase']))) {echo "SELECTED" ;}? > > DN </option >

  < / select > < table >

  < /tr >

  < b >

  < td > < table >

  < td > < input name = "pxID" type = "text" id = "pxID" value = "<?" PHP echo $row_spec_rx ["px_id"];? ">" size = "3" maxlength = "3" > < table >

  < td colspan = "4" > < input name = "Update" type = "submit" id = "Update" value = "Update" > < table >

  < td > < select name = "userID" id = "userID" >

  <? PHP

  {}

  ? >

  < option value = "<?" PHP echo $row_users ['user_id']? ' > ' > <? PHP echo $row_users ["username"]? > < / option >

  <? PHP

  } While ($row_users = mysql_fetch_assoc ($users));

  $rows = mysql_num_rows ($users);

  If ($rows > 0) {}

  mysql_data_seek ($users, 0);

  $row_users = mysql_fetch_assoc ($users);

  }

  ? >

  < / select > < table >

  < td > external

  < input <? PHP if (!) ((strcmp($row_spec_rx['ext_rx'],1)))) {echo 'checked' ;}? > name = "extRx" type = "checkbox" id = "extRx" value = "checkbox" > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < td > < table >

  < /tr >

  < /table >

  < input type = "hidden" name = "MM_update" value = "updateSpecRx" >

  < / make >

  < p > < / p >

  < / body >

  < / html >

  <? PHP

  mysql_free_result ($spec_rx);

  mysql_free_result ($Users);

  ? >

  Thanks for any help

  Resolves this post:

  How to pass a URL parameter after update?

• After effects CC 2015 viewer is not updated after ctrl + z

  After that effects CC 2015 viewer is not updated after ctrl + z.

  I have a simple rect form I've tried to convert using transformations Rect or transform effect. All working and trying to look at Ctr + Z does not change.

  Its impossible to work.

  The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

  Details: http://adobe.ly/1QqMMc6

  Let us know how things work after installing the update.

• NAV to and links page broken after update of the content viewer!

  I just put a message from my client asking why all the Nav and page links to the links do not work? She has just updated the Viewer on his ipad.

  After updating the content on my Ipad Viewer the same thing happened.  I now have to download each article again to see if this corrects the folio.

  I've updated the 1 article and this seems to have fixed the entire folio links. Signature and content viewer seems however to stop the links once again. At the moment I have everything works again. Is this a bug?

  The fix is now in place. Download the new version of DPS App Builder and edit or rebuild your single-folio application. The links on the page should function properly.

• After updating, my iphone blocked from Iphoto, itunes

  After updating my Iphone 5, it can more interact with Iphoto or Itunes on my laptop (2008 ongoing OSx 10.6.8). Macbook When I open Itunes, the error message reads "Itunes could not connect to the Iphone because an invalid response received from this device". When I run Iphoto, the error that says "Photos cannot be viewed or imported because the Iphone is blocked with an access code...". "but the password is disabled. When I plug the Iphone into the USB I am asked to trust/mistrust the phone, I choose the trust.

  Hello CA 22!

  Thank you for using communities Support from Apple! We see it in your post that you are having problems using your iPhone 5 that has been upgraded to iOS 10 with your Mac running Mac OS X 10.6.8.

  To use your iPhone 5 with iOS 10 with your Mac, you must first Download iTunes 12.5.1 which requires Mac OS X 10.9.5 Mavericks or later to install.

  Please let us know if that answers your question.

  Sincere greetings.

• After updating firefox, pages load correctly with windows 10

  Okay so after I upgraded to firefox with my windows 10 update, everything was fine. but lately I have had problems with some sites Web does not. so after updating firefox to its default settings, I uninstalled and reinstalled nothing works correctly in firefox. Since I did the update its maddening that nothing does not load. I have attached a picture of what look like my web pages. I tried to help, but everything is messed up on the pages. can someone help me with this?

  There are security software such as Avast and Kaspersky that intercepts secure connections and sends its own certificate.

  If you have Avast then try disabling the analysis of HTTPS in the Web Shield, Avast.

  • http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/
  • https://Forum.avast.com/index.php?topic=176073.0

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the "Add Security Exception" this URL chrome by pasting into the address bar of Firefox and check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field of location of this window, type or paste the URL of the Web site.

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  You can check details such as the issuer and the certificate chain in the Details tab of the certificate display.
  Check which is the issuer of the certificate.
  If necessary, you can attach a screenshot that shows the display of the certificate.

• "Secure connection failed" after update to firefox 39

  After update to firefox version 39 I am unable to pay the bill online, purchases invoices etc and received this message "secure connection failed".

  An error occurred during a connection to acs.onlinesbi.com. SSL has received a low ephemeral Diffie-Hellman key in the handshake message exchange the server key. (Error code: ssl_error_weak_server_ephemeral_dh_key)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Report this error.
  Please help me how to solve this problem. Thank you.

  This indicates that the site is by default an obsolete encryption encryption algorithm that is vulnerable to the attack of 'Blocking' which was in the news earlier this year.

  You can turn off these old present in Firefox to try to force the site to his game. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste dhe and make a pause so that the list is filtered

  (3) double-click the preference security.ssl3.dhe_rsa_aes_128_sha to true to false (disable Firefox to use this encryption)

  (4) double click on the security.ssl3.dhe_rsa_aes_256_sha preference from true to false (disable Firefox to use this encryption)

  Then try your payment site. Any improvement?

• Location (GPS) service no longer works after update of Os 9.3.2

  My GPS service does not work after update os on IPHONE 6 64 GB. Deleted, hard reboot as well os re - load os, I did, but still unresolved question and google Mao or Apple card does not. It seems that many Iphone user have the same problem after the Os update to 9.3.2.

  My wife also have the same model and updated to Os, but its Google map works perfectly. have online search of dome on the solution, but no luck.

  How to solve this problem?

  Hello, jayantg,

  Thank you for using communities of Apple Support.

  I see that your GPS service stopped working after the update to iOS 9.3.2. I use location Services on my iPhone, so I know how much it is important that we get this problem is solved. I have something I want you to try.

  Job to the subject of privacy and location Servicesand ensure that the location service is enabled and learn how the precision of GPS to improve, in particular, these two sections:

  Enable or disable location Services

  You can enable or disable location Services in settings > privacy > location Services. You can enable location-based Services during the wizard process of installation or later through the creation of location-based Services. You can individually control applications and system services have access to the data of location Services. When location Services are disabled, the apps can't use your position in the foreground or background. You will thus limit the performance of various Apple and third-party applications.

  

  Settings > privacy > location Services.

  

  Settings > privacy > location Services > System Services.

  Improve the accuracy of GPS

  GPS accuracy varies according to the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. Follow these tips to improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
    Important: Incorrect settings on your computer can sync to your device. Check the date, time and time zone on a computer that syncs with your device.
  • Restart your device.
  • Make sure you have a cell phone or Wi - Fi network connection. This allows assisted GPS (A - GPS) on the device to locate the fastest visible GPS satellites, in addition to providing information about the initial location using Wi - Fi or cellular networks.
    Microcells (sometimes called Femtocells) are not supported with location Services.
  • Keep a clear view of the horizon in several directions. Please keep in mind that walls, vehicle roofs, tall buildings, mountains and other obstacles can block the line of sight to GPS satellites. When this occurs, your device will automatically use a Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  All the best.

• 'between' column empty after updating

  Hello

  I have conversations 2.7 extension installed and enabled

  I after updating to TB 3.10, entre column went blank - there is no detail of the people involved in the conversation for each topic.

  Everything worked before the upgrade.

  If I disable the extension of field work conversations.

  Turning off and renabling the extension, as well as remove and re - install the extension does not solve the problem.

  Anyone has any ideas how to solve this problem?

  j

  I use the updated version of the 2.8 Conversations.

  When I walk it: display > display Conversation
  I noticed the same question about "Between" column.
  I also experienced other problems such as the buttons does not.
  Expand collapse has been blocked in compact mode and superimposed text.
  The "show this conversation in a new tab" did not work.
  opening in a tab is stuck "Loading" and the header area seemed wrong.

  This never happened before regardless of the version of TB.

  I had just updated to Thunderbird 31.0, but had closed and restarted since. Then, I selected the Conversation view to see the errors. But if necessary, to close and reopen to make it work.

  I closed Thunderbird, waited for the process to finalize and then open Thunderbird. Now it works well.

  Suggest that you get the latest version of Conversations first. Perform a restart.

• Firefox screen blew up after update

  After updating, the design, layout and the text of firefox "blew up." It is too big.

  The only advice that I have always after the search has been trying to view > Zoom etc.,.

  Only, this changed the screen I was and is returned after a change to a new page, open a new tab or restart firefox.

  I need a permanent solution where the firefox screen is where it was before.

  Amendments of the code regarding the HiDPI support high-resolution displays have landed at Firefox 22 and later (bug #844604).

  You can change the layout.css.devPixelsPerPx and increase or decrease the value of 0.1 or 0.05 as follows to adjust the size of fonts and other elements in Firefox.

  • The layout.css.devPixelsPerPx pref is a string parsed in float value and allows you to adjust the dimensions of all elements (user interface and web pages) specifically (resolution 0.1 or 0.05).
  • Change the default value of-1 to 1 to make it work as in previous versions of Firefox (100%)

  Start with a value of 1 and adjust this value with 0.1 or 0.05 for finer settings.

  • Use values between 1.0 and around 0.5 to reduce the size of the items (do NOT go all the way to 0.05!)
  • Use a value greater than 1.0 to grow and enlarge the elements (percentage divided by DPI, % / DPI).
  • http://KB.mozillazine.org/about:config

  _{EDIT by Chris_ilias: to summarize:}
  

  1. In the address barof Firefox, type Subject: config , then press the Enter key.
     If the "this might void your warranty!" warning appears, click on I'll be careful, I promise! to continue.
  2. Search for the preference layout.css.devPixelsPerPx
  3. Double-click the entry and change its value of-1.0 and 1.0
     (you can change this upward or downwards if necessary, for example, 1.1 to 0.9).

  Note that the changes take effect immediately. To its default value, right-click the preference and select Reset.

  If the web pages must be adjusted after changing this pref so you can watch the extension Default FullZoom Level or NoSquint.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  This extension allows to adjust the font size for the user interface:

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

• Checking update Java plug-in does not show latest version after update same

  Checking update Java plug-in does not show latest version after update same

  You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

  See also:

  • Article on Java Mozilla - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
  • VΘrifier versions on site Java - http://www.java.com/en/download/installed.jsp

  Other - you should check your Plugins and update as needed.

  • Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in, version 11.6.7.637 (aka Shockwave Player. Not the same as Flash/Shockwave Flash/Adobe Flash Player)
    • http://KB.mozillazine.org/Shockwave (mozillazine.org seems to be down at the moment (12/12/2012 11:34 am PDT), try again later)
    • Download, save, exit/close all browsers, run the installation program you just downloaded - http://get.adobe.com/shockwave/thankyou/
  • Adobe PDF plugin for Firefox and Netscape 10.1.4 (Adobe Reader 11 is the current version)
    • https://support.Mozilla.org/en-us/KB/use-Adobe-Reader-plugin-view-or-download-PDF-files

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!