That really means the vertical range? And the gain factor?

Similar Questions

• Is someone can you please tell me what the 'I' attribute file 'Content not indexed' really means? I found countless contradictory explanations for it.

  After doing a system restore, I have questions using being hidden files that should not be and is not being hidden files indexed. Nothing seems to work for unmasking files. The file properties dialog box doesn't help, so I'm looking (once again) to use the attrib-H command. Wondering if the - I would help me as well, but I can't find any MS doc that really explains the attrib. This means the file that IS NOT indexed or that the file cannot be indexed?

  Kind regards
  then missing XP

  Here is the documentation for Microsoft

  http://msdn.Microsoft.com/en-au/library/ee332330 (v = VS. 85) .aspx

• Range and lines

  Hi people,
  
  I never used beach or front lines in analytical functions. I took the time to learn a little about them, but can't understand why would you need to use it? Most of the things that I needed I got in advance or delay functions. So what is the problem with window functions? Where are they useful?
  
  Best regards
  Igor

  Hi, Igor,.

  Igor S. wrote:
  Hi people,

  I never used beach or front lines in analytical functions. I took the time to learn a little about them, but can't understand why would you need to use it? Most of the things that I needed I got in advance or delay functions. So what is the problem with window functions? Where are they useful?

  What do you mean by "window function"?
  That commonly means the functions that allow you to specify a window of consecutive rows in your data set and the function will operate on the lines within this window. In this sense, the more analytical functions are functions of the window.

  The default window's RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW. You only need to specify a window clause (in other words, the BEACH or the LINES) If you want to replace.

  For example, the following query shows the weighted average of the table scott.emp and the number of treatments that contribute to this average, two different ways. The cnt_sal and avg_sal columns use the windowing by default, so the numbers on each line to include this line itself and all the previous lines (where hiredate determines what is earlier). The cnt_60 and avg_60 columns include only 60 days, not including the line itself. Note that sometimes there are 0 rows in this window.

  SELECT       ename
  ,       hiredate
  ,       sal
  ,       COUNT (sal) OVER ( ORDER BY  hiredate )     AS cnt_sal
  ,       AVG (sal)   OVER ( ORDER BY  hiredate     )     AS avg_sal
  ,       COUNT (sal) OVER ( ORDER BY  hiredate
                              RANGE BETWEEN  61 PRECEDING
                              AND          1 PRECEDING
                       )                    AS cnt_sal_60
  ,       AVG (sal)   OVER ( ORDER BY  hiredate
                              RANGE BETWEEN  61 PRECEDING
                              AND          1 PRECEDING
                       )                    AS avg_sal_60
  FROM      scott.emp
  ORDER BY  hiredate
  ;
  

  Note that the formula of cnt_sal is exactly the same as the cnt_sal formula, except that cnt_sal_60 specifies a RANGE. It goes the same for avg_sal and avg_sal_60.
  Output:

  ENAME      HIREDATE         SAL    CNT_SAL    AVG_SAL CNT_SAL_60 AVG_SAL_60
  ---------- --------- ---------- ---------- ---------- ---------- ----------
  SMITH      17-DEC-80        800          1        800          0
  ALLEN      20-FEB-81       1600          2       1200          0
  WARD       22-FEB-81       1250          3 1216.66667          1       1600
  JONES      02-APR-81       2975          4    1656.25          2       1425
  BLAKE      01-MAY-81       2850          5       1895          1       2975
  CLARK      09-JUN-81       2450          6     1987.5          1       2850
  TURNER     08-SEP-81       1500          7 1917.85714          0
  MARTIN     28-SEP-81       1250          8   1834.375          1       1500
  KING       17-NOV-81       5000          9 2186.11111          1       1250
  JAMES      03-DEC-81        950         11 2147.72727          1       5000
  FORD       03-DEC-81       3000         11 2147.72727          1       5000
  MILLER     23-JAN-82       1300         12 2077.08333          2       1975
  SCOTT      19-APR-87       3000         13 2148.07692          0
  ADAMS      23-MAY-87       1100         14 2073.21429          1       3000
  

  Published by: Frank Kulash on April 3, 2013 09:16
  Example added scott.emp

• I have an iMac 21.5 inch Mid 2010 OSX EL Capitan 10.11.6 Version and I get occasional yellow notes that appear on the display of the office telling my local name of the iMac 4 changed to local imac5 does that mean?

  I have an iMac 21.5 inch Mid 2010 OSX EL Capitan 10.11.6 Version and I get occasional yellow notes that appear on the display of the office telling my local name of the iMac 4 changed to local imac5 does that mean?

  Hi Clayton,.

  This means that some services has tried to open a connection & couldn't, possibly IPv4 vs IPv6 or iCloud/back to my Mac.

  Mifgt try the helpful message here...

  Name of my iMac computer continues to change automatically after Yosemite upgraded

• My taskbar is suddenly vertically on the right side of my screen instead of at the bottom. (default) Ive tried to bring it back to its original spot by clicking and now an empty space, but cannot get a reaction. How can I get that back to the default?

  My taskbar is suddenly vertically on the right side of my screen instead of at the bottom. (default) Ive tried to bring it back to its original spot by clicking and now an empty space, but cannot get a reaction. How can I get that back to the default?

  Right-click on the taskbar and make sure the taskbar are not locked. Then move it using the left mouse button. Microsoft® Security MVP, 2004-2009

• When I click on the download button opens a page with three small boxes, and I think that this means a wait, but they lasted more than two hours, unfortunately and I tried many things and each time gets the same, I work now want photoshop required a

  When I click on on the download button opens a page with three small boxes, and I think that it means a wait, but they lasted more than two hours, unfortunately and I tried much and each time gets the same thingit's working now, I want photoshop necessary and reminders even when I tried to buy the same thing happened to me Please I want to a quick solution

  Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

• Equal a comparison on DBL post in the range and force?

  Can I make and equal comparison between double when I use the upper or lower limit compared to the exit forced when the input value is not in the range? (Line and force function)

  I tried a little experiment with this idea and it seems to work very well, but... Although I like and respect Ben I really want to have to find a way to contribute a nickel to his pension fund.

  As far as I know, primitive equality simply compares the bits and since the antiderivative of coercion is officially (assuming that I understand the documentation) supposed to force up to the limit you specify, I guess this should always work (assuming you're really out of reach, of course). The question is what's the point?

• That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  My computer is having problems when I bought all first it was from another provider which came as a set overclocked PC up the unit everything needed had to be put in my case & add existing hard drives & DVD etc. readers added on the implementation. I used the same location for more than 10 years before that I always built them myself I can build a good setup computer I correspond to different parts inside each other, and then he tested & sent.
  Unfortunately, the store has closed & the owner is sick cannot get their hands on him more & I had to get some add on things like new SSDS & some other bits in my system & the young boy said he would could do this job, but everything went wrong & I lost all new so I decided to recycle me like I used to do it before windows 7-64 came out I was going through a rough patch with me being paraplegic in any case it is difficult to build a new PC, so I chose this store & their confidence that went wrong now & I've been research & learn to catch up with the new technology, I do what I do anyway.
  Thing is my system is never one that you can purchase a manufacturer & I left it with the young boy & it came out all memory & was not necessary but of course upset of that ruined the setting completely overclocked so I did it myself & I got the work faster than ever, & quieter PC I just got the score that he had now , so I'm happy with it, but the names I came across while overclocking I came across that I'm not average or really lot as were dealing with Fast CrossfireX DDR RAM 1600 MHz.
  Please don't tell me that I should not be messing around with what I made since 1989 & made great strides in how everything works, I am not aware about this sort of thing I know SATA what it is & done, but those responsible for setting came from the part of overclocking in the BIOS I put then correctly , but I wanted to know what they represent in more depth. Thanks to anyone who can put me wise on these 3 points only. Malcolm.

  I'm pretty sure that you are on the wrong "forum" for this type of topic. This forum is designed as a support Pro-type Surface ultrabook/tablets and tablet-like Surface.

  That said,

  AHCI - Advanced Host Controller Interface - this is a hardware mechanism that allows the software to communicate with the devices Serial ATA (SATA). It offers features such as connecting hot and native command queuing (NCQ).

  IDE - Integrated Drive Electronics - IDE is basically the 'old' version of AHCI without connection to hot and NCQ. (It is usually used during the era the Parallel ATA (PATA) hard drives)

  Now. Mode AHCI and IDE mode - what is - this? IDE mode is to give you the greatest compatibility with older operating systems. AHCI is as I mentioned above, a modern version of the IDE - use the AHCI mode if you are running recent operating systems (Windows Vista + and Linux kernel 2.6.19+).) IDE mode will allow you to connect older operating systems with SATA drives.

  As I mentioned above, SATA is Serial ATA and the replacement of hard drives Parallel ATA (PATA).

  RAID - this is a storage technology where combine you multiple disks in a unit of 'single', depending on the mode, there may be RAID-0 and RAID-6 and each with different hard drive configurations. I will explain the simple examples: RAID-0 , which is the distribution but no parity or mirroring, this means that there is no data redundancy, if there is a failure on a disc, it will cause the loss of data on the entire RAID array. Ex: You 0110 as writing the data, 01 goes on disk 1 and 10 goes on disc 2, allowing a faster data read/write access.

  RAID-1- This is the opposite of RAID-0, which is mirrored without interlacing (no parity or the other). Basically, this means that you have an exact clone of disk 1 disk 2 disk 1 failure.

  RAID0 + 1 is that both RAID 1 and 0 is, IE interlacing (write data simultaneously to two [or more]. disks more mirroring failure) the minimum amount of disks required for this type of installation is 4 IDENTICAL drives.

  There is also RAID 2, 3, 4, 5, 6. That is just more implemented different configurations of distribution/parity/mirroring on disks.

  That being said, your RAID mode will allow you for some type of RAID configuration, if you choose to do so.

  Supplement: Many SATA controllers can enable AHCI separately or in combination with RAID support. Recommend Intel choose RAID mode on their motherboards, allowing also the AHCI, rather than AHCI/SATA mode for maximum flexibility (in the case that you ever want to build a RAID array), because there are a few problems that occurs, usually BSOD, when you choose a different mode once an operating system is already installed.

• Updated the "vertical" turn and moves

  Hello

  I have a script for InDesign create a Vizier in a vertical line and the horizontal line. That works perfectly on a horizontal line, but he turns and moves the object from its current position while creating a vizier on the vertical line. Can someone help to stay on its original position.

  Here's the script I have. You can find the error image as well inside. Thanks a lot for your help in advance.

  var = half 0.07;

  Vee var = 0.0416666667;

  var obj = app.selection [0];

  if(App.Selection.Length == 0) {alert ("error: no row is selected;")} Please select a single line of Vizier. ») ; Exit (0) ;}

  If (obj.constructor.name! = "GraphicLine") {alert ("error: a line was unsuccessful;")} Please select a line of Vizier. ») ; Exit (0) ;}

  var limit = obj.geometricBounds;

  var width = [3] limits - limits [1];

  var height = [2] limits - limits [0];

  var midpoint_h = limits [2] - (height / 2.0);

  Var high = midpoint_h - half;

  var low = midpoint_h + half;

  var y1 = limits [2];

  midpoint var = limits [1] + (width / 2.0);

  var left = middle - half;

  var right = mid + half;

  var y = limits [0];

  If (app.selection.length! = 1) {alert ("error: more than one object has been selected;")} Please select a single line of Vizier. ») ; Exit (0) ;}

  If (height! = 0.0)

  {

  obj. Paths.Item (0) .entirePath = [[bounds [0], y1], [top of the page, y1], [midpoint_h, y1 + vee], [bottom, y1], [bounds [2], y1]];

  app.layoutWindows [0] .transformReferencePoint = AnchorPoint.TOP_LEFT_ANCHOR;

  obj.rotationAngle = 90;

  } Else if (width! = 0.0) {}

  obj. Paths [0] .entirePath = [[limit [1], y], [left, y], [midpoint, y + v], [right, y], [limits [3], y]];

  } else {alert ("error: the line is not horizontal.")} \nThis script only works on perfectly horizontal lines."); Exit (0) ;}

  

  Hello

  Definition of the properties of path.entirePath means deciding where the trail has been blazed - so no need to turn.

  Any notice entirePath values.

  I suggest you set vertLine like this:

  //...
  if(height != 0.0)
  {
  obj.paths.item(0).entirePath = [
    [bounds[1], bounds[0]],
    [bounds[1], top],
    [bounds[1]+vee, midpoint_h],
    [bounds[1], bottom],
    [bounds[1], bounds[2]]
    ];
  } else if(width != 0.0) {
  //...
  

  Notice the document horizontalMeasurementUnits and verticalMeasurementUnits thus, cause your change depends on current unit series.

  Jarek

• That means the "unexpected internal application error?

  Hello world
  
  I just saw this message for the first time tonight. Nobody knows what it really means?
  
  "An unexpected internal application error has occurred. Please contact < MyCompanyName > and provide reference # for further investigation. »
  
  This message seems not familiar to me at all. I do not know where Apex becomes my company name of. Any ideas?
  
  Thank you
  Kim

  Hi Kim,

  I assume you are using the example of database Application or similar application. This message is displayed by the 'manipulation function Error' demand. Go to "Edit Application Properties"-> "Error Handling"-> "error handling function. The referenced function is a stored function or package in the database that contains the code needed to handle the error in the application. It allows you to map errors in a new text of the error. See http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/ and http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-2/

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Vertical forms that parade with the tab to keep the cursor on the screen

  I have a high vertical shape that is roughly 2000px in height. If the user moves through the fields, they "fall" the bottom of the screen. Which means, the cursor moves in a field out of sight but the scroll bar will not push down automatically to compensate and keep the cursor in view. Ideally the scroll bars to move with the cursor as they do when a tab in a traditional html form. Any help is appreciated. Thank you.
  
  Lokesh-
  
  
  

  I had to do this thing myself. A bit like it to be registered in the normal...

  Anyway, here's an example application that does what you try to do:
  
  http://www.Adobe.com/2006/mxml">

  
  private void checkPos(target:Object=null):void {}
  var yPos:Number = target.y + target.height;
  Debug.Text = "";
  var shiftAmt:Number = 0;
  If {(yPos>cont.verticalScrollPosition+cont.height)}
  shiftAmt = yPos-(cont.verticalScrollPosition + cont.height);
  Debug.Text += "Move down: '+ shiftAmt + '\n';"
  } ElseIf (yPos<=cont.verticalScrollPosition)>
  shiftAmt = yPos-(cont.verticalScrollPosition + target.height);
  Debug.Text += "Move to the top: '+ shiftAmt + '\n';"
  }
  cont.verticalScrollPosition += shiftAmt;
  Debug.Text += "yPos:" + yPos + "display space: '+ cont.verticalScrollPosition +' - '+ (cont.verticalScrollPosition + cont.height);"
  }
  ]]>
  

  
  
  
  
  
  
  
  

  If your form has a TON of controls, then you can just make a function to automatically bind the listener in actionscript... dunno which is easier. Writing onFocus = 'blabla' for each component is a drag, but it's simple...

  If there is an easier way to do it, I hope that someone will say so, because this is how I do it and it's not very fun.

• Will correct the error between mac FF27, Silverlight, and Netflix, (FF26 works) and or error in "On Firefox" that ALWAYS install the new version?

  (personal information (password), removed by the moderator. Please see the guidelines and rules of the Forum -m)

  First of all, your field 'password' (in the registration form) will not work with the password *. What is legal by your definition. You guys are really slippery. Your work starts to suck, your incompatible and you make a lot of mistakes, maybe you should take a breath and aim at a stable platform instead of adding new bells and whistles every 15 minutes. I'm very sad to know where you filed as recently disappeared.

  This problem (see your question above line) has finally upset me so much that I take the time to let you know on the subject.

  If you go to the window "On Firefox" under OS X, just check the version of the software; It will ALWAYS be up-to-date. In the case of FF26 to FF27. This is regardless of what the update is defined in preferences! And of course that makes Netflix no functional (netflix) generates an error indicating that Silverlight must be uninstalled and reinstalled. However, what needs to be done is for FF27 to be trashed and FF26 be reinstalled.

  Please, if the product is not stable it is not usable, period.

  You can check for problems with preferences.

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  Try this > about: config check the settings for these prefs and reset by clicking twice if one is true (it is to stop the automatic updates)

  App.Update.auto - false
  App.Update.Enabled - false
  App.Update.Silent - false

  You said:

    First off, your "password" field (in the registration form) will not work with the password *****; which is legal by your definition.
  

  Can you elaborate more on what you're talking about? Your existing password does not work on this site (support.mozilla.org) or is it something else?

• After the download of 4.0 and when I'm ready to install it it tells me in may cause viruis. That should make the iI.

  After downloading 4.0 that I get a pop up screen that tell me that this download may contain viruses and it ask if I still have what it takes to move forward. I don't really have that any virus. What I would do.

  This is a standard message and apply it to any executable file. If you downloaded Firefox from Mozilla, you can ignore the message.

• I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. At the opening of th

  I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. When you open the zip files at this other app asked me if I wanted to extract zip files in a new folder, I have accepted, in both files .js (javascript) files there. I opened these .js inside this same application files and content files white text on black background and that seems to be a script file. My question is: my iPad Air has been compromised by a scam of viruses, such as the Trojan horse thieves and banking password especially as Dridex or Dyreza, the Trojans and ransomware as Locky, cryptolocker, or Teslacrypt. If that were the case, then what is the solution to get rid of these... Thank you.

  Simply delete them. It is not possible to install anything on iOS using this method. For good measure, you can remove and reinstall the application allowing you to open it with, but I don't really have that is actually needed.

• the white lines (with the key that don't meet pluse) comes and goes randomly

  Hello

  I have iphone 6 more.

  Sometimes vertical Whitelines light 1/random th of screen from the top.

  During this time they display, touchscreen doesn't work sometimes and sometimes it works out gibberish.

  I press somewhere else and something else is pressed.

  Then all of a sudden this problem disappears until I use the phone. (no whitelines or touch that do not meet, everything becomes perfect)

  Once I have it put to sleep or leave for some time the problem will come still sometimes.

  This isn't software issue since I reinstalled 9.2.1 ios again and again with full reset. (deleted all my apps just to be sure)

  There is no hardware failure, because the problem is not persistent and works of my screen and touch all the other times. I think that cables or the connection is loose. given that this problem comes and goes randomly. I can live with that, but its * boring. A sec I talk to someone and I can't cut the call.

  Please help me, Service Center said that I need to replace my phone. They will not understand this and I want to just replace it without reason.

  Tip: I live in India where these people are not able to diagnose even the question and want me to pay for something, I clearly did not cause.

  And since my warranty is out, I have to pay appx ~ $ 470 for a problem that no one can tell me and search the Internet or apply basic logic is simply because cable is at fault.

  Again, there is no hardware or software defect. Its a few wiring loose and noone at the apple repair center wants to diagnose what it is.

  All they want to do is replace the * phone without reason.

  I'm sorry, but the loose wiring is a hardware problem. Since there is no authorized Apple service provider who manage the repairs of the screen, their only alternative is one out of warranty replacement of the device, given that your warranty has expired. To be honest, even here in the United States, if Apple tries to replace the screen and it will not fix the problem, their answer would be the same, a replacement of the officer of the WATCH. They do no wiring at the Genius Bars. Your response is more disabled because of your location. You can see if there is a 3rd party competent repair facility that can run on the device. This decision is yours.