The administrator cannot connect to the Internet

Similar Questions

• My laptop cannot connect to wireless internet. Ethernet works fine. Wireless is enabled on the laptop.

  original title: portable wireless problems

  Hi guys, my laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too. Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the wireless internet just yesterday. I know that my router is not the problem because I have a laptop connected to her brother. Also, I tried the FN + F8 key on my Toshiba laptop. Thank you in advance.

  Hello

  Is this also your thread with a different name?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/wireless-Internet-on-laptop-not-working/aedbda38-a56e-E011-8dfc-68b599b31bf5

  ====================================================================

  To do a hard reset on the router and the modem, you must feed their STOP, wait 3 minutes,
  then then turn on the modem on - when it comes back - router - when it is set to zero
  computers.
  ----------------------------------------------

  Anyway the same answer applies: update WiFi driver that something has probably
  He touched. Make sure that the wireless device is turned on, if there is a switch on the computer.
  Many Toshiba have a WiFi switch on the front or side.

  Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
  system and your transfer on removable media such as CD, DVD or a USB key.

  Control Panel - device - network - WiFi note the brand manager and full
  model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »

  Then on the tab driver, click Update driver (this can do nothing as MS is far behind
  drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
  update the driver stack.

  Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
  where you put it - make a right click on it - RUN AS ADMIN - REBOOT

  Then go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
  the device) and try the install again.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ====================================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

• the administrator cannot connect to the internet, but other users?

  the administrator cannot access internet, but other users on the same computor? all ideas

  Hi David,

  ·         What happens when the administrator tries to access the internet?

  ·         You receive an error?

  ·         Since when are you facing this problem?

  Respond with more information so we can help you best.

• Satellite M30-154 cannot connect to wireless internet (wifi)

  Hello

  I did a recovery of product on my m30 - 154 a couple of days, and now it doesn't connect to the internet wireless, we have in our House. He sees the SSID, but it just connect, I have already made an update of the BIOS and an Intel update and I don't know what to do now. Can someone help me?

  see you soon

  > he sees the SSID, but it is enough to connect

  The SSID is secure. Right?
  Can you connect to open Wlan?

• Suddenly cannot connect to wireless internet

  All of a sudden, my laptop does not connect to the internet.  I did nothing different and same fact a system restore from a month ago, but nothing has changed.    Use the Atheros AR 5005 G wireless network adapter.  Recently moved to Cleveland, OH, Houston, TX, and given that the move will not connect.  I tried to configure using the Wireless Zero Configuration (WZC) in accordance with article 871122, but it still doesn't work.  Help, please!

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• administrator cannot connect to my computer toshiba laptop

  There are 2 accounts on my laptop... me and my husband... I am the administrator, and it is a standard account... today when I tried to open my acct model showed this: the user profile Service has no logon.  User profile cannot be loaded.

  What happened I disconnected and closed as usual last night... why I can't go on.

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• WRT150N could not connect to the internet!

  My uncle gave me a new internet router WRT150N. When installing, I get all the way to step 11, when I get a window that opens and tells me that my router cannot connect to my internet. He said to turn my modem on and apart and start over. First of all, my moden is not one we or off button, so I just unplugged and plugged again. Nothing happened. I called the number of Linksys, and the guy made me do all this just to tell me that I already knew information (that my IP address was on my computer and my modem IP address (or router, do not remember who he is) who is 192.168.1.101) on step 10, I entered the IP 192169.1.101 and it did not work. The man on the phone then told me how my warranty has expired and I have to pay 29.99 for him to set up on the phone. I said no, he said, then do it yourself and hung up. Very rude, me leaving with apsolutely no idea what to do or what the problem is. I tried almost everything. Resetting, turning on and out, enter my IP of the computer, nothing works! It will not always connect to the internet! And BTW, when on step 11, I get no internet (as if I try to open the Solution Explorer, the page is available).

  Help, please! What should I do so that it can connect and work!

  Connect the Modem to the router on the Internet Port and the computer to the router on Ethernet Port1... Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the Configuration tab, click the sub-tab ""clone MAC address ". Click Activate... Click Clone My PC MAC & click on save settings... try to go online. If it is not then power cycle the network and try again.

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir

• I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  Please see this link in the topic "successful."

  Creative cloud using Enterprise | Applications and updates

  You can use managed delivery of applications for the following:

  • If you need to exercise strict control over the applications installed on client computers.
  • If end-users have administrator privileges on the computer.
  • To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
  • If there is no Internet access on client computers.

• Cannot connect Tecra M10 to the Internet

  My wife has a TecraM10 with an Intel 82567LM gigabit wired network adapter. It cannot connect to the Internet via either wired LAN by plugging directly into the container of Cat 5 to the rear of the machine or the thorugh a docking station.

  A diagnosis indicates that the LAN switch is turned off and check the manual as to his location to turn it on.

  I can't find a reference to a LAN switch in the manual. I checked TCP/IP protocols and they progress ste correctly and the device manager says it's working properly.

  Any ideas? Thank you. John

  Hello John

  Card LAN installed and listed correctly in the Device Manager?
  >... LAN switch is off
  Laptops doesn t have LAN switch. WLAN spend only so I t understand how you can get this message.

  Please check device manager first and let me know if the network card is OK here?
  When you connect the LAN cable to your Tecra is green LED ON?

  By the way: did you test connecting to the local network using another PC/computer laptop?

• iPhone says it cannot update OS because I'm not connected to the internet

  iPhone says it cannot update OS because I'm "not connected to the internet", but I'm still able to search, go to web pages etc.

  At first, I tried with just plugged phone into a charger, but then tried to connect to my iMac via iTunes. He picked up the phone, said I had to update the operating system, made me enter and access code... still the same message "not connected to the internet. HA!

  It is a known problem. Apple has just released the 9.3.1 to fix this and other problems. Check the software update on the phone or in iTunes.

• All in a single 228 MS cannot find my router/modem to connect to the internet

  I just replaced the hard drive on my desktop MS 228 All In One. I installed windows 7 Home Edition premium and everything seems ok. The computer displays any internet connection included, even though we have a laptop computer and two tablets
  Connected wireless to our router / modem box. I got this computer connected wireless, until the hard disk is dead. I do not understand why it cannot locate the internet now. I get the message to connect to the computer with a cable, but I need a Wi - Fi connection because the internet area is some 3 meters across the room!
  What should I do for a wireless connection? I must have done a few years ago, when I first installed this computer... but
  Do not remember how I did it... Help please...

  Thank you very much Dunibar, all this work after having followed your instructions... your a star.

  Very much appreciated. What ABOUT James... Maxiboy.

• My iPad will not update because updating cannot be verified, because he says that I am not connected to the Internet, but I am?

  I can't update my iPad to ios9 because the error message says that my update cannot be verified because I am not connected to the Internet, but I am logged in?

  Annoying, isn't it? I have the same problem but technical support person responded with a solution. Or maybe it's just too messed up a forum to find the answer? No m

  or by e-mail. There are problems with Safari as well...