the agent requirements

Similar Questions

• The Agent AD requirements

  Can someone explain to me the need for 500 GB of disk space for the AD Agent.  It sounds like an incredible waste of resourses, especially if you are designing an application with a running backup agent... it's a terabyte of disk space... Reasons?

  CSCtw87812

  Documentation: AD agent of required disk space is incorrectly documented

  Symptom:

  Ad agent documentation indicates he needs 500 GB of disk space. This should indicate that the AD Agent requires 100 GB of space and recommend 500 GB

  Conditions:

  This is a bug in documentation to change the AD Agent to 100 GB disk space needs and recommend 500 GB

  Workaround solution:

  N/A

  I found the same bug adoc ob. According to the details of the bug. It should work with 100 GB file.

  "AD Agent didn't need 500 GB. I see the installation guide says, but this is incorrect. The majority of storage needed by AD Agent is for newspapers to customer is limited to 5 GB in this version. Other goods of space disk is Journal of debugging using the default value is around 200 MB. 64 K mappings are negligible in size compared to the newspapers. So I think it is safe to install the Agent AD with about 20-50 GB of available disk. But this limit must be verified by the test team. Compared to the new version will be a requirement of 100 GB only. »

  Jatin kone

  -Does the rate of useful messages-

• Several agents required for parallel (= asynchronous) execution of the script?

  Hi all
  
  We know how to simultaneously run multiple packages using scenarios and asynchronous execution mode. (See our wire [execution of multiple packages at the same time: http://forums.oracle.com/forums/thread.jspa?threadID=1045352 & tstart = 0])
  But when the choice of the agent in the properties panel, do we need to specify an exclusive agent for each scenario must be run simultaneously? Or we can use the same agent for all scenarios?
  
  Any help is appreciated.
  
  Kind regards
  Kai and Jan

  You can use the same agent, an agent must be able to handle multiple sessions.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to connect to the Agent to push with my credentials in the project PushCollector 10.1.

  Hi all!

  I am trying to create a client application to push to go with my project that I am creating a customer and am trying to learn how the PushCollector 10.1 functions to do this. I seem to have a problem, however, where the application may not be able to connect to the Agent to push after entering my credentials sent by the Services of Blackberry Push team showing.

  I logged into my account to make sure it is active and it is and have re-joined the AppID and the PPG URL 8 times literally!

  What I read I don't need to change anything in the file bar.xml for the PushCollector, but maybe I missed something.

  Can someone help me please?

  Thanks for your time,

  Rob

  Push requires a real device, so I think you have to find the cause of the problem.

• Possible bug? : External input (Type, number): failed to enable the 'Entry required' property presentation User Interaction tab

  Are people capable of reproducing the following, or is it just me?

  Problem:

  Impossible to activate the agent of property entry for an external input of type number in a user interaction as is not not but can define required entry of type string. This seems to affect interaction element user as well as the workflow if the number data type is used.

  Version: 4.2.1 but think it goes further than

  To reproduce for workflow entries:

  create a workflow, add entry named TestingNumber of type number and another called TestingString of type string.

  Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)

  Result: Unable to set the terms of ownership of number but cannot for string

  To reproduce the element of user interaction

  Drag a box to design workflow user interaction element aon add external called TestingNumber of type number of entry and another named TestingString of type string.

  Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)

  Result: Unable to set the terms of ownership of number but cannot for string

  It seems that it was possible before:

  In the workflow to Remove Instant excess in library/vCenter/Virtual Machine management / cliché. In the element of user interaction "Want to delete snapshots" the presentation tab has a number called "numberOfSnapshotLeft" which has a set of properties of entry required. screen attached.

  Meet others similar: http://communities.VMware.com/message/1848542#1848542 last posting mentions a similar case of not being able to establish the required entry of number but cannot string.

  Is this by design or a bug with my environment?

  Properties listed for number	Properties Sample referred to string

  
  Input parameter see theInput parameter see theHide the parameter inputHide the parameter inputPredefined responsesRequired entryPredefined list of itemsPredefined responsesDefault valuePredefined list of itemsMaximum number of valueDefault valueMinimum number of valueMaximum string lengthNumber formatMinimum length of the stringData binding.Custom validationData bindingCustom validationMulit

  It was available in earlier versions of the vCO and was withdrawn "by design". I don't remember what was the explanation. I worked around it by using other properties of validation such as min / max, or a custom validation.

  You can open a support call if you want the official response.

  Christophe.

• question about the deployment of the agent / agent.properties

  Hello
  
  I need to create a simplified agent deployment mechanism.
  Basically, I'm in an environment of the seller.
  I don't have access to the entire area where the agent must be installed and I can't use ssh / key mechanism.
  But still I want to reduce human intervention to a minimum.
  
  So I created my own tgz, including an agent.properites.
  agent.setup.camIP = x.x.x.x
  agent.setup.camSSLPort = 7443
  agent.setup.camSecure = yes
  agent.setup.camLogin = hqadmin
  agent.setup.camPword = xxxxxxxx
  agent.setup.agentIP = * default *.
  agent.setup.agentPort = * default *.
  agent.setup.resetupTokens = yes
  
  Please note that I've changed resetupTokensto Yes.
  
  But that's what I'm not sure. It seems to work. install the tgz and just run the script initialization and everything good, but will be him renegotiate a new token each time?
  
  Is it possible to have a sort of pre generated token that I could integrate into the tgz?
  tell genereate the token on the server and then copy it in everywhere wherever he goes?
  
  Thank you
  Ben

  Hey Ben,

  I'm a new technical writer Hyperic. I work on documentation of installation/configuration of new or improved and scouring the user forum so I can understand what lack us in the current literature.

  Don't know if this will help, but here is my understanding of the mechanism of token.

  The token is generated the first time that the Agent starts, regardless of the setting of agent.setup.resetupTokens.   Setting and let this property to 'Yes' will cause a new token to be generated whenever the Agent is started.  It would be useful if, for some reason, a token got corrupted or deleted.

  I'm not aware of any way to manually generate a token.

  There is a doc page that attempts to address about reducing the user intervention required for the deployment of the agent here: http://support.hyperic.com/display/DOC/HQ+Agent+Deployment. I did not approve this content yet, so consider it "FWIW.

• Server and the agent must be running as root (under centos linux)?

  I have not seen anything in the installation documentation that mentions that it is advisable to run the Actual process and agent as root.  I noticed that, when is not running as root, the agent was unable to analyze certain directories, which seems a bit undesirable.
  
  My plan was to create a simple script to call HQ - agent.sh power in /etc/init.d (for example) and then use symbolic links to standards in /etc/rc3.d to start and stop the agents and the server automatically.
  
  Is this normal practice?  A bad idea?
  
  Thanks for any advice.
  Jay

  As you have noted, there are many parts of the system that require privileges to access and monitor. The simplest solution seems to be to use the root user to run the agent, although more complex solutions using a properly assigned permissions, sudo for specific orders, or him are more synchronized with security best practices. I have personally not yet explored all the possibilities, but know has endeavoured to ensure the process is running as root is not a hard requirement.

  A start/stop script looks like a very good idea. All right, in fact, you should find an example called agent.rc in the hyperic-agent-2.x.x/rcfiles directory. A point of departure in any way.

• Remove the agent of converter without rebooting

  Hi all

  You can remove the agent of VM converter from a source without restarting so the next clone ends without error?

  Hello

  VM converter 3.0 version does not require a reboot. For more information please visit the link below.

  http://www.VMware.com/support/converter/doc/releasenotes_conv301.html

  Kind regards

  Aravind K

• Find the status of the Agent of the grid from the grid control repository

  Hello
  
  I need help on the extraction of repository of grid control. My database of the Grid control is 10.2.0.5 on Solaris 64-bit.
  In grid control, there is a report in the reports (installation of Enterprise Manager-> Agent information) tab that displays the status of all agents configured. I have the similar requirment but I will be filtering based on certain criteria and other factors, so I need a query sqlplus to extract information from the repository grid agent base of databases.
  Can someone please help to get information from the OMS using SQL repository Agent * MORE
  
  Kind regards
  Ajay

  Hi Ajay,
  Do you mean something like:
  SELECT
  M.TARGET_NAME, M.START_TIMESTAMP, M.AVAILABILITY_STATUS
  OF SYSMAN. MGMT$ AVAILABILITY_CURRENT M
  WHERE Mr. TYPE_DISPLAY_NAME = "Agent".
  AND M.TARGET_NAME NOT in ('erereeer', 'Scott', 'qwdasdasd')

  Eric

• ODI - cannot start the agent of

  Hi John,.
  
  I installed ODI 10.1.3.5 on windows server 2003. I followed the steps you mentioned in your blog. Now I'm like you try to start the agent, but get the following error in saying we need JDK:
  
  "" C:\OraHome_1\oracledi\bin > agentscheduler.bat '-port = 20300.
  A JDK is required to run Web Services with OracleDI. You are currently using
  a JRE.
  OracleDI: Starting the Scheduler Agent...
  java.lang.NullPointerException
  at com.sunopsis.d.a.f.b (f.java)
  at com.sunopsis.tools.core.SnpsStringTools.b (SnpsStringTools.java)
  at com.sunopsis.dwg.DwgObject.snpsDecypher (DwgObject.java)
  at com.sunopsis.dwg.DwgJv.treatCmd (DwgJv.java)
  at com.sunopsis.dwg.DwgJv.main (DwgJv.java)
  at oracle.odi.Agent.main (Agent.java)
  
  Please suggest how I can fix this problem.
  
  Thanks in advance

  user10994705 wrote:
  Hi John,.

  Even for this his throw the same JDK error. I tried to encode this password by following the steps in your blog but received error JDK. Here are the error messages:

  1st attempt:
  C:\OraHome_1\oracledi\bin>agent.bat encode the password
  A JDK is required to run Web Services with OracleDI. You are currently using
  a JRE.
  fDyp0E6KcOReErMpqzTl

  ^ There are coded password fDyp0E6KcOReErMpqzTl

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Questions the agent (minimum distance of installation orders)

  I have a few questions about agents for ODI.
  
  First of all, lets say that I have a couple of agents set up for a production environment. We're in a box of SQL Server and is on a box of Essbase (just as examples). If I run a batch of OS file using the agent on the box of Essbase, the operating system batch file is running on this box Essbase? In other words, I don't have to set up some kind of special software (such as PSEXEC) or a script from the window to make the batch file of the operating system running on the remote server, would I? I guess that if I use the agent on the box of Essbase, because he just listen to and then sends the compiled code, that code would be executed on the Essbase server.
  
  If I had but a single agent on SQL Server and you want to run a command on an Essbase server OS file, would be that batch file need to be put in place to be executed remotely?
  
  In the second place, which must at least be installed on a server to create an agent on this box? The software ODI must be installed (so that drivers, the odiparms.bat file etc will be available for the agent) and then the agent installed through the command line (set up as a service). I suppose that if this is the case, there would be no need to change anything in the modules of topology or security, just to make sure that the drivers folder is updated and the odiparms.bat file is updated. However, is there a minimum amount of software that can be installed (essentially, the minimum of crude to get the agent works correctly).
  
  Hope I'm being clear in my questions.
  
  Thanks for your help,
  
  Matt

  Matt
  You seem to have got it. An agent is a process that runs on a server. If you run an OSCommand of this agent, it is called on that server. So if you for example want to run an excerpt from SQL Server using BCP, you will have performed by the agent in your SQL Server box. The output file "land" on the server where the command was executed.

  To install an agent, you must still libraries etc. It runs as a Java application on this platform and requires the same etc. jdbc driver libraries that you use on the development environment. Use the Setup program to install, and there is only one installation of the agent. (if you cannot run the Setup program on your platform, then just move the directory oracledi to your installation media and configure the ODI_JAVA_HOME variable, and you are away.
  C

• What is absolute minimum Plug and the memory required for the performance of modern editions of Firefox?

  I am running a machine Windows XP Service Pack 3 on 512 MB of ram and I am perfectly happy with Firefox 28. But I considered up-to-date. However I'm not sure that my machine can handle anything beyond version 28 and 29 (which I didn't like and so back to 28 anyway) it is interesting trying to update, or do I stay with what I have?

  Hello

  You can check the system requirements here:

  • https://www.Mozilla.org/en-us/Firefox/32.0.3/system-requirements/

  It is highly recommended that you update to the latest Firefox to keep up-to-date with security updates. Note that if you don't like the interface for Firefox 29 +, there are extensions that can return the theme of an interface, you are more at ease.

  • The Restorer of classic theme to bring back the old design. Learn more here: How to make the new look of Firefox as the old Firefox.

  For more information on the themes of Firefox, see the article use themes to change the appearance of Firefox.

• "How to stop this message"do you want to install the plugin required to view media on this page.

  How to stop this message "do you want to install the plugin required to view media on this page.

  I don't need the plugin to play the video ok

  If it comes from the Flash plugin you can switch pref plugins.notifyMissingFlash false on the topic: config page.

  You can open the topic: config page via the bar of address and you can accept the warning and click "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• I don't want the password requirement but impossible to turn it off. iPad Air v. 9.3.2

  I won't have the password requirement. How can I disable it? iPad Air v. 9.3.2

  I tried to go to the settings and password. No luck.

  What happens when you try to turn it off?

  Settings > password. Enter your secret code. Then, tap on disable password. You will need to enter your password again, if I remember. Note: If you have a corporate email account on your device, you can stop to remove the password.

• 15.0.1 Firefox what are the system requirements for Mac?

  I use Mac OS 10.6.8 and I can't install Firefox v 15.0.1. What are the system requirements for this new version of Firefox running on a Mac?

  Firefox should work fine on Mac OS X 10.6.8

  See:

  • http://www.Mozilla.org/en-us/Firefox/15.0.1/system-requirements/

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Basket of the current application of Firefox (for example, open the Applications folder in Finder and drag the Firefox application to the trash) to do a clean install (re) -
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox