Different and several BSOD problem

Similar Questions

• Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

  Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

  If you had probably two problems

  Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

• Several BSOD and wifi disconnects

  I own an acer aspire E1 - 570

  Specifications:-Intel i3-3217U(1.8Ghz, 3MB L3 cache)

  4 GB of ram DDR3, 500 GB HDD. Graphics Intel hd 4000. Windows 8

  It is almost 2 years old laptop everything worked and the laptop is not repaired as a result of any problem. 2 portable weeks ago freezes a bit and the wireless adapter has disappeared suddenly. I used windows 8.1 right here

  Since that day I am faced several BSOD with different errors for example whea of incorrigible error, memory management to name a few, because I remember not all of them like every day, I see a new BSOD about 2 - 3 times a day. I tried all the simple, suggestion, troubleshooting advice literally all update the driver to install a copy of glass clean but wireless problem is unresolved and BSOD comes again.

  After all that I did including my laptop and my laptop fan, the ram and the wireless card, that the problem got

  resolved for a day, but again once she returned.

  The current scenario is that now wifi disappears it shows connected but frequently shows limited conmection and is practically unusable because every minute I disconnect and reconnect to use it. And this morning, it worked well or a time and again started to do the same things. Sometimes it doesn't find any network and say no networks detected and reconnects automatically after a certain time.

  Also today new problem appeared. It freezes and is a hum coming from the speaker for a minute and it starts to work again and he has also restarted once during this freeze moments.

  Problems remain in windows 8 and windows 8.1.

  Convenience store usually shows problem with wireless adapter or acess point and connect it again, but the next minute the same thing repeats, with limted connection wireless network.

  Please if someone can help out me. Thanks in advance.

  Hi Aditya,

  Thank you for the update.

  You should not have to reinstall Windows. However, if SFC displays corrupted files and failed to remedy, I suggest you run the DISM tool and check.
  Refer to this article:
  Difficulty of Windows Update errors by using the DISM tool / System Update Readiness
  https://support.Microsoft.com/en-us/KB/947821

  It allows to correct certain errors of corruption of Windows.

  Please keep us informed.

  Thank you

• Windows registry is linked to the .dll files? HELP several BSoD and browse... crashed during post! for the love of God

  Must be quick, title says it all
  Windows registry is responsible for the .dll files?
  SFC shows SEVERAL DLLs not missing, no installation CD.
  Not good recovery CD.
  I have the copy of the registry before changes but online before browser support multiple and many BSOD.
  Will post now as browser crashed early in post and the 5 th time in half an hour.

  Thanks for the reply Elizabeth23, but I finally found the part of the SFC.

  SFC showed 167 system missing files - if you continue to press Cancel > continue every time SFC tells you to put in your Windows installation CD eveeentually happen to you at the end of his race - and I ran 3 times and each time got 167.
  Now I had some of the 'missing' located in System32 .dll files, but some were also in i386 and the drivercache but I had not located a bit; but I knew that something is not right I had found some system 'missing' files and after that a few hunting came across a site that said to check the registry key
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
  CurrentVersion\Setup

  and under SourcePath my entry is a file that does not exist 'Temp' so I changed the entry to C:\WINDOWS rebooted and ran SFC/scannow and it scanned without stopping.
  Weird as the registry key was in a file that is no Temp because I ran many SFC
  times in the last 2 months and it always scanned all the files in the operating system without a hitch...

  My computer is still BSoDing out, had two after SFC took place without a hitch.

• blue screen nvlddmkm.sys for nVidia GeForce 9500 M on studio dell XPS 1340. recently upgradeed to windows 7, fine for a while but now cela and has many problems: BSOD, freezing, CPU utilization more... I DO __HOW FIX IT?

  Hi, well bad get right to it. I have a dell studio XPS 1340 and have recently upgraded to Windows 7 last week. everything was fine until last Monday. When I switched high performance mode for my battery, my nVidia card also goes to Boost Performance. but this time, I got a blue screen with this:

  nvlddmkm.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  Since then I tried to update the video driver from the dell site and even the nVidiasite. one of them gives me a blue screen as soon as I get to the windows login screen. and the other divides my GeForce 9500 M into its two parts > GF 9400 MG + GF 9200 AMS. When this happens, I can't use the nvidia Control Panel and I can't go to boost performance. I have uninstalled and installed these drivers in safe mode too, but no luck. I system restored before the weekend, when everything was fine, but still the same problem. so now, I have the driver 8.15.11.8633 version

  other side effects I've noticed is that Skype does not work either. When I first upgraded to win 7, Skype has worked well. but now, when I run a video or normal call, my computer completely freezes. In addition, the games I play seem to decrease in performance. I used to be able to play very good Burnout Paradise, but now there is a significant drop in fps. also, the computer seems to use more cpu and heats more quickly. The battery life has decreased too. and when I use windows media center to connect with my xbox360, my phone freezes when I try to access a video.

  I tried the diagnostics start and the only problem was:

  Error code: 0F00:133 media suitible C Msg:No drive is present

  and today, I used the windows debugger and it came with it. im sure this is good information, but I don't know how interperate it. Please help and thanks in advance!

  Microsoft (R) Windows debug 6.11.0001.404 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\111409-21434-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug_symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  The kernel version of Windows 7 7600 SQUARE free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02e0d000 PsLoadedModuleList = 0xfffff800' 0304ae50
  The debugging session: 11:03:52.777 sat 14 Nov 2009 (GMT-5)
  System Uptime: 0 days 1:03:33.572
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .......................................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88007000000, 0, fffff880047d5b1e, 0}

  Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys

  Could not read the name of the problem driver
  Probably caused by: nvlddmkm.sys (nvlddmkm + 135b1e)

  Follow-up: MachineOwner
  ---------

  KD >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88007000000, memory referenced.
  Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
  Arg3: fffff880047d5b1e, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  READ_ADDRESS: fffff88007000000

  FAULTING_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: System

  CURRENT_IRQL: 0

  TRAP_FRAME: fffff88009d7fdf0-(.trap 0xfffff88009d7fdf0)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff88007000000 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffffa80057a7270 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff880047d5b1e rsp = fffff88009d7ff88 rbp = 0000000000000000
  R8 = 0000000000000000 r9 = 0000000000000000 r10 = 0000000000000003
  R11 = fffffa80057a7298 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  nvlddmkm + 0x135b1e:
  fffff880 '047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4] ds:5110:fffff880' 07000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80002efe1e4 to fffff80002e7ef00

  STACK_TEXT:
  "fffff880 '09d7fc88 fffff800' 02efe1e4: 00000000'00000050 fffff880 ' 07000000 00000000 00000000' fffff880 ' 09d7fdf0: nt! KeBugCheckEx
  fffff880 '09d7fc90 fffff800' 02e7cfee: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 047d60b0: nt! : FNODOBFM: 'chain' + 0 x 42907
  fffff880 '09d7fdf0 fffff880' 047d5b1e: fffff880'04824f5e fffff880'04 c 72260 00000000'00000000 00000000'00000001: nt! KiPageFault + 0x16e
  fffff880 '09d7ff88 fffff880' 04824f5e: fffff880'04 c 72260 00000000'00000000 00000000'00000001 00000000'00000000: nvlddmkm + 0x135b1e
  fffff880'09d7ff90 fffff880'04 c 72260: fffffa80 00000000'00000000 00000000'00000001 00000000'00000000 ' 04ef9000: nvlddmkm + 0x184f5e
  fffff880 '09d7ff98 00000000' 00000000: 00000000'00000001 00000000'00000000 fffffa80 '04ef9000 fffffa80' 057a 7270: nvlddmkm + 0x5d2260

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nvlddmkm + 135b1e

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a4fbef6

  FAILURE_BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  Follow-up: MachineOwner

  Hi anchit02,

  Thanks for posting.

  The page fault has a high probability to be RAM or hard drive related.

  You can test the computer memory using the memory diagnostic tool.

  You can start the memory Diag tool by clicking the ORB start and type 'Memory diagnostic tool' in the search box, clicking on the entry that is displayed.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the store and several questions.

  I tried all the methods listed below:

  Method 1: Make sure that User Account Control (UAC) is enabled.

  Press the Windows key and from the splash screen, type "UAC" and on the right, select settings.
  Select change user account control settings and check here.

  Method 2: Check the date & time zone is correct:

  Follow these steps to change the time.

  a. double-click the current time on the lower right of your screen.

  b. then click Change hour date, then click on the button to change time zone

  c. Select your time zone and the tick to automatically adjust clock for the time being, then press OK

  d. press on apply, then OK.

  Method 3: Run the network troubleshooting and check if you can connect to store.

  Follow the steps to run the network troubleshooter utility:

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, tap network troubleshooting in the optionSearch .

  d. clickutility troubleshooting networkto run the troubleshooter.

  Method 4: If you use a proxy connection, then try to disable the proxy and then check if the problem persists.

  Follow the steps to disable the proxy:

  a. open Internet Explorer

  b. click on the Tools buttonand then click onInternet Options

  c. click on the Connections taband then clickLAN settings

  d. uncheck it Server Proxy use.

  e. click on apply then Ok to save the changes.

  Now, check if you can access store.

  Method 5: Cache reset Store.
  Follow the steps and check out them.
  (a) right click on the start screen
  (b) click on run
  Type c) in WSReset.exe
  (d) press enter
  (e) restart the computer and check.

  Method 6: analysis Run SFC
  (a) right click on the lower left corner of the screen and select 'Admin command prompt.
  (b) type following command, and then press ENTER: "sfc/scannow".

  Method 7: I suggest that you disable the antivirus installed on the computer.

  Method 8: CDevil Windows Firewall settings

   

  (a) Type in the Panel on the Start Page.

  (b) on the left side, click on Control Panel.

  (c) click on Windows Firewall.

  (d) in the left pane, click "allow an app or feature through Windows Firewall."

  (e) under the features and applications allowed, look for store.

  (f) make sure that you have a click in private or Public.

  (g) then see if you can open the Windows store.

  Not a SINGLE one of these methods have worked. When I go to my home screen and click on store, he told me 'we could not connect to the Bank. This could have happened due to a server problem or a network connection has expired. Please wait a few minutes and try again. "I did it on my network troubleshooting, all right, I am able to connect to everything, but I've NEVER been able to connect to the store. Not only can I not connect to the store to upgrade to 8.1 Windows, but I can't create restore points. Not only that, but the backlight on my keyboard, no matter which option to choose, is always on when I type, even if I say it stays off. In addition, with Windows 8, I was promised the "quick start" where he takes no time to start, it takes more to start my computer windows 8 as it did my 4 years updated to the windows computer 7. Also, I can't start in Safe Mode or the clean boot. Whenever I try to perform the clean boot by using the options in the window manager and the configuration tasks system, when the computer reboots, everyone who opens are reset to zero and it doesn't work. I can also perform an update of the system. I want to just upgrade to 8.1 windows, but I'm not without the WS and NONE of the methods I have found work. I'm about to say the hell with windows 8 and make a downgrade from the system to an OS that actually works. I had nothing else problems since I bought this computer with windows 8. I don't have time to deal with these questions. It is clear that appropriate testing procedures were followed before the release of Windows 8. Please help, I am very frustrated with all of this.

  I also tried before asking this question. I don't know what happened, or how he did it, but the store has started working when I was on other networks, he didn't always works at home well. I finally download and install windows 8.1 and it fixed the issue together.

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• Several BSOD on Asus laptop

  Hello all, recently I've known several BSOD since 2 weeks ago & I never installed any other software this month. I'm kinda new to this problem so please help me to solve this problem, thanks in advance.

  Here's the report from WhoCrashed dump files
  (Local) information system
  name of the computer: PC-HOME
  version of Windows: Windows 7, 6.1, build: 7600
  Windows dir: C:\Windows
  Material: K46CM, ASUSTeK COMPUTER INC..
  CPU: GenuineIntel Intel (r) Core i5-3317U CPU @ 1.70 GHz Intel586, level: 6
  4 logical processors, active mask: 15
  RAM: 4174868480 total
  VM: 2147352576, free: 1994543104

  Crash Dump Analysis
  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Wednesday, January 29, 2014 15:51:33 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012914-15288-01.dmp
  This was probably caused by the following module: win32k.sys (0xFFFFF960002AC69D)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF960002AC69D, 0xFFFFF900C2C21CF0, 0x0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\win32k.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: Multi-User Win32 Driver
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Wednesday, January 29, 2014 15:51:33 GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: win32k.sys (win32k! BRUSHOBJ_hGetColorTransform + 0x8A8D1)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF960002AC69D, 0xFFFFF900C2C21CF0, 0x0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\win32k.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: Multi-User Win32 Driver
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Wednesday, January 29, 2014 0:41:41 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012914-17347-01.dmp
  This was probably caused by the following module: win32k.sys (0xFFFFF9600027C69D)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF9600027C69D, 0xFFFFF900C0BFDCF0, 0x0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\win32k.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: Multi-User Win32 Driver
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.

  
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Sunday, January 26, 2014 19:54:58 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012714-16114-01.dmp
  This was probably caused by the following module: c:\windows\system32\cdd.dll (cdd + 0x6D15)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF960006F6D15, 0xFFFFF8800A62E0D0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\cdd.dll
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: Canonical Display Driver
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Sunday, January 26, 2014 14:59:54 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012614-18361-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x71F00)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000305B01E, 0xFFFFF8800A48F0A0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Sunday, January 26, 2014 7:56:35 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012614-15693-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x71F00)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000309D01E, 0xFFFFF8800C28EC70, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, January 25, 2014 1:21:36 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012514-16801-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x71F00)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000304101E, 0xFFFFF88008D960A0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  These accidents were related to the management of the memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.  Because it seems to be a driver that I would run to check first.
  

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  1-Memtest. (You can learn more about running memtest here)

  2-Driver Verifier (for full instructions, see our wiki here)

  Co-written by JMH3143

  .

• Several bsod after clean windows 7 installed

  Hi everyone, I was hoping to find a solution to the crashes in my computer, still, I was not very successful.
  I changed my cpu and ram, motherboard after getting several bsod, especially whenever I tried to use the internet, but it seems to change my material wasn't the answer. I have a clean install of windows 7 Ultimate edition, and the problem will still...

  My physical characteristics are: Intel core i3-4330 cpu, 4 GB of RAM, nvidia geforce 250 gts and my motherboard is a MSI H81M - E33 V2.
  The bsod I get is: Page_Fault_in_non_paged_area; Kernel_mode_exception; Bugcode_usb_driver; Irql_not_less_or_equal; Bad_pool_header
  and someone without description, it only shows numbers.
  If someone is willing to help me I would be very grateful.

  BTW, I noticed there are some older drivers such as the driver Atheros WiFi dated dated 2007 which
  should be updated as I mentioned above.

  Drivers Atheros WiFi.
  http://www.Atheros.cz/Atheros-wireless-drivers.php

  DriverView execution - set VIEW to hide Microsoft drivers - update those without DRAIN in their
  names. First check MSI, then real device indicated on the even newer version sites.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on
  your system. For each driver in the list, additional useful information is displayed:
  load address of the driver, description, version, name of the product, the company that
  created the pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
  and complete the model of your video - double click - tab of the driver card-
  Note the version information. Now click on UPdate Driver (this can do nothing
  that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
  will update the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No more BSOD problems!

  A few days ago, I thought that my BSOD problem have been resolved. See the thread below for more details.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/BSOD-driver-power-state-failure/cf94a0ac-d58b-421d-A548-2acaa3c6185e

  I just did make several windows updates, so the next step was to restart my computer. After a few minutes, I got another BSOD.
  Here is my file minidump below:------.
  https://SkyDrive.live.com/redir?RESID=6768C1B15998D5BB! 118 & authkey =! APTkKp0mpx6Ejf8
  Please and thanks in advance!

  Hi Jessica,.

  Method 1: Remove all devices (except keyboard and mouse) external connected to the computer and check if it helps.

  Method 2: Perform the steps from the link below and see if it helps.

  Resolve stop (blue screen) error in Windows 7

  Stop (sometimes called blue screen or black screen error) error may occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem.

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Note: make a backup of all your data on an external drive before you perform an upgrade in-place, as this may result in loss of data.

  Hope this information helps.

  Answer please if you have any questions.

• Re: BSOD problem was detected on the Satellite L40 - 14N

  Hello

  have been unable to fix a fault on my laptop. BSOD problem has been detected and windows has shut down. I was told by someone that this was resolved when they replaced their hard drive.

  Could someone tell me what hard drive I need to get?
  Once I have to get one and put it in the machine should it restarts just using the system recovery disk, because it is what I have provided with or will it get other new software?

  I hope someone can help. Really lost without a laptop!

  Hello Netties

  Please do not be angry on me, but I do not understand why you start the second wire on the same issue. All this can be clarified on your original on this BSOD problem thread.

  In any case, if you have a warranty valid, please don't spend your money for the new hardware before clarify you this with maintainer authorized Toshiba. Maybe you are right on HARD drive, but please first check with the ASP.

• Slow APEVIA CYBERPOWER, 4-core, Windows 7 Home premium-slow two start and several popups asking me to change the settings

  I followed all the directions to Norton Support staff, but windows won't let me access the 'C:\Users\Chris>chkdsk.  My machine is slow and several companies have informed me serious problems.  (In the black box) of "Start - Search says chkdsk " access denied because you don't have enough privileges. " You have to invoke this utility running in elevated mode.  I used the system and Defragmenter tools.  The "USER ACCOUNT" of my control panel lists ' Chris as administrator, still will not allow me access!  Neither I nor Tech Norton can understand this one.  CAN ANYONE?

  My problem is that now I'm quite cash and poor credit and I can not find a freeware without scanner is not a costly record for the fix.  Now I wonder if they still exist.  Can someone help an old man handicapped with nothing in his life to do than to play Flight Simulator-X.

  Signed

  Out-Of-Commission-Without-Some-Help.

  I bought a computer from them 4 years ago and my experience was not very good.  I had to replace the motherboard and power supply and while I was there I replaced the RAM sticks because they were not compatible with the jury as well the only thing original is the case, and the microphone on the front panel is not working still I have not tried yet the helmet.

  I don't know what the problem with your machine, but it is possible that it is hardware or software partners. I suggest that you post in the forums there is someone out there can help you out. If your machine is still under warranty I contact them or take it to a reputable repairshop. Just to let you know I was really sick and I couldn't return my machine within a period of one month return policy, and they told me to come any time to get my computer fixed.
  I rode it five times and was always a problem. The only solution was to fix it myself.

• Whenever the system is booted it shutsdown and the BSOD right before seeing the screen Ctrl Alt Del to log on. STOP: 0 X 05001210 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000)

  Original title: Stop: 0 x 05001210

  On a Toshiba Portege M700 with Windows XP, I get a BSOD with the following:

  STOP: 0 X 05001210 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000)

  There is no further information on what happened, it just says: a problem has been detected and windows has shut down to prevent damage to your computer.

  I don't know any specs on the system (processor, memory, ect) I was given this laptop from edge of my guy on the ground.  I searched and I can't find any info on this Stop error message.  It was not a new hardware or software installed on the laptop recently, other than a possible update of Windows, I'm not sure.

  Whenever the system is booted it shutsdown and the BSOD right before seeing the screen Ctrl Alt Del to log on.  I tried the Safe Mode, Mode safe mode with network and command prompt.  Each instance you get to the log in window, but when after entering my info and loggging stop immediately with the same BSOD.  I also tried the last good Config known with no luck.

  Also, the hard drive is encrypted so I can just shoot and get a backup of it before you try to reinstall the operating system.  I have not tried to repair windows, yet, I'm waiting to try other solutions if they are there.

  If anyone can point me in the right direction I would really appreciate it.  If you need any other information, just ask and I'll give you everything I can.

  Hello Jordan,.

  Have you been able to get into the recovery console?

  If so, I would recommend running the CHKDSK command of it followed by the Enter key:

  CHKDSK C:/P

  Let us know.

  Best regards

  Matthew_Ha

• BSOD problem

  Hi, my computer still restarts and the Bsod was asked to stop 0x0000D1 and ktqttf.sys.

  I googled several site, but he said to solve 0x0000D1 need to check the hardware and software. I don't know what hardware or software should remove. And I can not find and solve the ktqttf.sys. Please! I need HELP!

  APCK5555

  I also suggest that you download the free Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• get different and independent, URL script errors as adware, how can I remove?

  get different and independent, URL script errors as adware, virus protection does not help, have changed the advanced options in IE, how to remove or stop the script errors?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the above does not correct it transfer your question in the internet Explorer forums

  http://answers.Microsoft.com/en-us/IE