The AIA question: COM and SOM are in different instances of the OSM
Hi all!I tried to install control components to enable it in my local environment.
When I set up "OracleComms_OSM_O2A_COMSOM_TypicalSolution" in the same server, the order of implementation of the SOM was created successfully.
But during the installation of control components to enable it in the step "Setup of WebLogic Server resources", I decided to use the typical topology, deployment, central order (COM) management and management service (SMO) order in different instances of the OSM.
After configure WebLogic Server Components in both machines (COM - SOM) I have been "OracleComms_OSM_O2A_COM_TypicalSolution" in my local computer and 'OracleComms_OSM_O2A_SOM_Solution' in the other machine. But when I'm in the tests of time that COM order cannot create the order of implementation of the SOM in the other machine.
I need to configure to be available to create orders of Provisioning SOM in a different machine according to the proposed model?
Best regards
AndresG
Hi Andres,
Please check two things if you did that you have two separate instances
(1) in the ProvisioningSITask, please check if 'WebServiceCreateProvisioningOrderQueue' has any published without any error message.
(2) If a 1 is Yes, then please check if you have created a JMS bridging between the two instances of the OSM. As the COM message should sink to SOM per JMS Bridging.
Thank you
Native Jacques
Tags: Oracle
Similar Questions
-
I hope you can help me. I bought adobe captivate 8 online and when I click the e-mail link for download, it comes up with 7 programs, some are 64-bit and some are not, my computer is 32-bit. I don't know which of these 7 to download? All or just the 4 non 64-bit?
I tracked down the problem with the download and installation, my windows 7 was missing a file and everything worked after reinstalling windows. The first 32-bit program in their list was used. I hope this can help others.
-
I recently changed my ISP because I had connectivity problems. Especially my router would be closed sporadically. As part of my attempt to identify issues, I ran some spyware that I was told that I could trust. Since then, I have a problem looking at many websites as much (but not all) images are missing, even on websites that I know very well, including my own. What is odd, is that on one site each page has an image jpg under the navigation bar and all these jpg appear except for one who does not even appear when I reload images. This problem also makes security of sensitive sites as my amateur full site look Bank that scares me. The problem does not occur on other web browsers.
What spyware software do you run?
Make sure that allow you pages to choose their colors and you have not enabled high contrast in the Windows accessibility settings.
- Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
- Check that the images are enabled: Tools > Options > content: [X] loading images automatically
- Check exceptions in "tools > Options > content: Load Images > Exceptions.
- See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).
If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.
There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.
-
Some files are show in blue color and others in black, how do I change the color?
Thank you.By default, the files on a NTFS drive are displayed in
Black for normal files
Blue for compressed NTFS files
Green for the encrypted files (Windows Encrypting File System)If you don't like it, open a Windows Explorer window, click Tools > Folder Options > view and uncheck the box for "Show encrypted or NTFS compressed in color." If you wish, click on the "Apply to all folders" button (you will apply all the settings for any folder you have open to all records).
-
When I type some letters are ignored and some are spaced Word
When I type a letter or e-mail it ignores certain letters and sometimes will put words together instead of spacing on their part. If I go in the message box and hold down the space bar, the cursor stops and passes directly instead of gtoing regularly across the page. What causes this.
Hello!
Click on this link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/scrolling-and-keyboard-have-a-delay-of-maybe-1-to/dfcb0e48-9817-46d1-82f5-7fad53e3580bI hope this helps!
-
The colors on my monitor and cintiq are slightly different, how can I fix?
Hi, I'm on Adobe Photoshop cc and I noticed that when I move the window between each monitor changes color, it can be seen when quickly slide between each monitor the last color a little trolling.
Gyazo - 7f75625d110da10e8d8cef43e19eecea.gif
What was wrong with the response that you got in this same thread two days ago?
-
Can I move multiple layers and some keys to different layers along the timeline?
I'm a newbie trying to achieve and can not find how to do it in one step.
You can move selected keyframes left or right simply by dragging keyframes. Make sure that you're hovering directly over a keyframe. When you make this Layer 3 will become deselected and will only move keyframes.
If you take just the layer 3, then all the keyframes will move.
You can move the CTI to the first keyframe in layer 5, then set a layer marker on the layer 3, then do drag the layer 3 to its new position, and then select the keyframes on the 5 and 2 layer and drag them to align it with the layer marker. Hold down the SHIFT key will make keyframes align with the mark.
It does not work the other way around. If you move keyframes, so try and align the guide layer to keyframes, it won't work, or at least not work reliably.
I hope this helps.
-
Screen and keyboard are showing different letters
as the title suggests some letters are mixed up when I type someone can help thanks.
What language do you use for your type of keyboard? I know that in Widows XP I had the same problem when you try to use the Romanian. Z Y and Z and so on.
-
Installation of vmotion when management network and vmotion are on different subnets
I have vswitch0 which is located on the 172.18.9.x subnet and has my management interface with a gateway of 172.18.9.1 vkernal using 0 and 4 Teddy
When I create vswitch2 which is on the 172.18.10.x subnet and is for vmotion using Teddy 1 and 5, but the front door must be 172.18.10.1
It seems that I can have only a vkernal gateway. So I don't I get the vmotion switch to use a different gateway?
These are my first boxes of ESXi and I've not enabled ssh, so I only have the vi client to configure with.
You might have a network problem. Have you tried with just a single teddy bear in the vswitch and used a cross on the cable? Virtual LANs in use?
-
Some of the files in my files are blue and others are black. What does that mean?
original title: list of foldersWhen I view any folder, some elements are in BLUE , and some are Black. All of a sudden, it started a few days ago. Whats up with that?
Refer to this article on the files, and compressed files:
"How to use file Compression in Windows XP"
<>http://support.Microsoft.com/kb/307987 >HTH,
JW -
I built a Web site in a muse to adobe for the office and tried to convert to mobile but all of my pages are blank and I want to edit the pages, because the elements of the page are more running and some are even cutting and it's ugly. can I just change the site or what I need to build a whgole new Web site from scratch?
Hi John,.
Please refer to cannot do Tablet and desktop phone versions
Kind regards
Akshay
-
Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages, and some of them are constantly a quantity apparently without end on top of the other. For example, I replace to change the color of the border and notice a black there's below him so I deleted the extra and there is another and another and another... EEK. I can easily hide them, BUT I fear they will lead to complications in the case of pre-press printing. What is the cause? What can I do to prevent it? How can I get rid of the stack-up?
It's always haapening, if you substitute any element on the page and later master you reapply the same or another master. I would NEVER say to replace any itme master page in the page. Instead create another master based on the first, make the substitutions and apply this master. Substitutions on the pages should be avoided in all cases, not only for the problem you described above, other issues of accessibility will also come into play.
-
I'm lost here. I left a message in the discussions [4 years PS E7 problems developing -?] and he was moved to the "Forum elements. Yes, I was wrong. I come here and there are about a dozen question back 4 hours and no sign of page numbers. Not a total newbie to forums, but I'm lost. 8-)
I searched "4 years PS E7 developing problems...» "and couldn't find even in Discussions and notifications that it has been moved. I would have thought that a search would have led me on the Forum of items with notes as to how much, if any, had read it. This is what I'm used to. As I said, I'm lost. Sorry if it should be obvious, and if I look like a whiner.
Viewerx wrote:
Oh, so it has been moved, but still listed in the Discussions? You could say that.
When a thread is moved, it will also appear in its place of origin for a short period in order to allow the original poster to find.
I didn't know where it was posted. I'm not a moderator and couldn't have moved it. Only, I went to your profile and watched your activity:
-
There are 15 albums that I tried to transfer the 'library of windows' to 'windows media player' on my PC, but the duplicate folder and some files were empty. What should I do?
Hi David,
There can be several causes for this problem which are preventable
I suggest to follow the steps provided and we update on the State of the question.
Method 1: Run the troubleshooters and check if the problem is resolved.
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Method 2: If the problem persists, then clear the database of Windows Media Player. To do this, follow these steps:
a. exit Windows Media Player.
b. for Windows 7: click Start, run, %LOCALAPPDATA%\Microsoft\Media Player and then click on OK.
c. Select all files in the folder, and then click delete on the file menu.
Note: You don't have to remove the folders that are in this folder.
d. restart Windows Media Player.
Note Windows Media Player automatically rebuilds the database.
Method 3: If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
a. exit Windows Media Player.
b. If you run Windows 7, click Start, run, % LOCALAPPDATA%\Microsoft, and then click OK.
c. Select the folder Media Playerand then click delete on the file menu.
d. restart Windows Media Player.
Note: Windows Media Player automatically rebuilds the database.
For all windows questions do not hesitate to contact us and we will be happy to help you.
-
After you download the security update 2015-008 I lost the function of the function keys and some other functions. Have already played with the keyboard f nothing helps. Are also past system on and outside... need help pls
PS noticed the update downloaded twice
disregard my previous question... I found the answer: F1, F2 has been ticked on.
Maybe you are looking for
-
Open photo of Photos in the Preview app? Need info GPS and maps!
Hello! I write trip review and to see where my photo was taken (in the maps application), and what is digital gps coordinates for each image. Search on google - go, I got that via this pic of opening in 'Preview' app. But - I have all my pic in Photo
-
Satellite L500-19 - no Win10 says Toshiba
Hi - the user of the Forum. Win10 list of compatibility of Toshiba for portable Satellite L500 Series! Why? Look at: http://win10upgrade.Toshiba.com/swup...=de&country=de ConcerningChris
-
Hello I have the Toshiba Qosmio G30 trying to upgrade to Windows 7. I get a message telling me that it cannot find RAID drivers. I ve updated the Toshiba does site still no luck. A no matter what you have an idea how to fix this?
-
HP Envy 23-d270er (problem with adapter Ralink Wi - Fi RT5390R)
Hello I just bought this touch smart (E8V92EA) 8 Win, which came with adapter Ralink WiFi RT5309R (driver 5.0.25.0 DT. 12.04.2013). The problem is with the slow speed of connection Wi - Fi this is 3 times more slow, then with a another USB adapter, I
-
Hello What is the default TCP on ACE time and how I can check it out. I have the sticky time set to 720 minutes. It applies to TCP timeout as well.