The color Panel offers only cursors in grayscale

Similar Questions

• Windows 10 Lightroom 6 (not CC) installed and reinstalled but still opens with a HUGE text in the two panels, leaving only a small space to see photos. Preferably and other screens also occupy more than full screen. Appears as tho Lightroom is in failure

  Windows 10 Lightroom 6 (not CC) installed and reinstalled but still opens with a HUGE text in the two panels, leaving only a small space to see photos. Preferably and other screens also occupy more than full screen. Appears as tho Lightroom is in failure Mode (failure mode). Can anyone help?

  Hello

  Click Edit > Preferences

  Go to the interface tab and check the font size: it should be automatic.

  Press enter

  Restart the Lightroom

  Thank you

• The program panel displays only the zoom-in video

  Hello!

  I just downloaded Adobe Premiere Pro CC 2014 and I can't view the video in the Panel of the program. The source of left panel shows full display while clip that the program on the right panel displays only the zoomed video (see below). Is it possible to change this? I am trying to edit the video in accordance with a separate audio file and need to see the entire video as I edit.

  Thank you!

  

  It seems that it is doing things and your fair sequence is not sized according to the vertically oriented video. The source monitor panel displays the whole image because it didn't fit in a sequence that does not match the press.

  You must determine which parameters you want for your sequence (e.g. 1080 p 30 fps), add media (within the parameters of sequence, you gave) and adapts the video to fit black leaving on each side. Alternately, you could just drag the video file on the "new element" in the bottom right of the project Panel to a new sequence with the settings automatically according to the media, but then you will end up either cropping when exporting, or with a record high rectangular movie that not match most of playback environments. It is a common problem with all the video side that people these days with their phones and others. The video is inherently horizontal unless you look at it on a handheld device that has no particular 'up' direction.

• Switching of the modes of color in the color Panel?

  When designing in the RGB color space, why spend you using the colors RGB and STL when applying colors to shapes?

  Thank you.

  Only the H cursor will change according to the document color mode because the RGB Spectrum has more colors in there.

• Play and rename the clip in the project Panel, using only the keyboard

  I want to use my keyboard to navigate through the items displayed in the thumbnail view in the Panel project (pictured below), play these clips and rename these clips. Already, I am able to up, down, left, right keys to navigate and can press ENTER to rename the clip. However, the space bar does not play the selected clip unless I use my mouse to click on it.

  

  I really want to avoid using my mouse in this process. This will greatly enhance the convenience of crosses a lot of clips and visualizing and renamed.

  Someone at - it suggestions? Open to workarounds or other ways to skin this cat.

  It is a problem I always had with first - I think that it is not a solution, but I wanted to ask the community to see if someone has found a way.

  Using Mac OS X 10.10, latest version of first CC

  Hey mammolastan,

  I don't think there is a way to play a clip with Sapcebar in the project without first Panel by clicking on it. You should have a demand: feature request/Bug Report Form

  There is a work around using only keyboard shortcuts, if you are interested. I prefer this workflow myself because you have to make the thumbnails big enough so that they can be useful, in my opinion.

  If you have already said, you can navigate with the arrow keys, press ENTER to return to rename and move to another clip or enter on the numeric keypad to not go to the next clip. When I do what you, I open my clips in the Source monitor and view them there, air conditioned and have no mice. SHIFT + O is the default shortcut to open an item in the Source monitor, but I've changed mine to Cmd + down arrow (as OS X). Then you can shuttle, set in/out points, make markers, etc., and then when you go to your next video you press SHIFT + 1 to return to your project Panel. It's more shortcuts, Yes, but given that you are looking for a KB option-driven, I feel you're fast enough with your fingers, and once you do it a few times, it is true no big thing at all.

• I have recently subscribed to the CC but offered only the trial versions of applications to download.

  I recently joined the creative cloud and wish to start to download all the applications I need; However, I am only offered for download trial versions.

  Thank you for your response, Mylenium.

  Turn on this morning, the question seems to have disappeared/rectified, unless I have to do or check anything.

• Adding swatches to the swatches Panel toolbar... takes default background color

  Hi I have some problems with the workflow in Photoshop. I'm new to Photoshop CC.

  I was previously using CS3

  I don't know why this is the case, but has been use to easily add the color of foreground for samples and now I have the colors of the foreground color, background to get the color I want in my color chart. It seems counter intuitive. Did I miss something or is there a switch to choose the color of the background instead of the foreground color when added to the swatches Panel?

  Choose the color Panel, and then click the foreground color

  Now, when you choose swatches > new nuance he must choose the foreground color

• How can I add lut to the lists in the new color Panel

  Is it possible to customize the list of read?  Release n the new 2015 CC, I wish I could add resembles the dropdown lists that appear in the color Panel.

  I have a lot of looks in different formats that I downloaded on my PC.  I know that I can navigate to them from the color Panel, but I would like to permanently add to the drop-down list so I can choose quickly between them.

  Is there a way to do this?  I tried to copy and paste the downloaded files in the same folder that the looks that are already listed.  This adds the new looks to the LUT under Basic Correction entry list, but not the list of Look under Creative, and it would be nice to make them appear under both.

  In addition, it would be even better to also remove lut that I won't use.

  I hope this question makes sense!

  addition of LUT Lumetri color? Adobe community

• How to set the STL as "Color Panel" method of collection of default?

  I prefer HSB for picking colors, if I'm in CMYK or RGB, but my choice does not stick. I'm changing it back to HSB. Is it possible to force the STL to be default in the color Panel?

  Thank you.

  Unfortunately, no.

  He always wants to go back to the color mode of the document. Nothing you can do about it.

• I need to know how to change the color of an image.

  I'm not a designer and do not pretend to be. Someone made a logo for me and gave me in photoshop. But I need to change the color of the logo. I bought the creative cloud and watched tutorials for days. I used the Replace Color tool and get out of there, but not really. Help, please. :/

  Hi Rachel, if you have the file have you can edit it directly in its native software that is Adobe Illustrator.
  To change the color to do the following.

  (1) open the file in Adobe Illustrator
  (2) once opened, select the white (or black) arrow tool in the upper left corner of the screen and click on the green lines. 90% this will select the entire line.
  (3) now, look at the bottom of the tools Panel on the left side of the screen, there are two colors. One is for the fill color and one for the color of the outline. One of these two is probably green. If so, double click it and choose the color you want. Click ok in the color Panel and you're done.
  (4) do the same thing on each side of the logo.

  There is a chance, the designer of the whole logo in groups. If this is the case (you will notice because you will not be able to select only the lines), take the black arrow tool and double click on the logo, until you'll be able to simply select the lines.

  Please let me know if it was clear and that you succeed.
  Kind regards

  Martin Benes
  Adobe Acp

• How to permanently change the color of a button

  I use an action to change the color of a button.  It works but the color changes for only about a second and then back to the original color.  How can I make the color change permanently?

  Sigh, if a question was clear, that he would not take as long to get a response. I knew there was more than simply by changing the color of a button, where my questions.

  Personally, I would never trust effects for this particular case. They do not always work as expected and even less in 8.0.1 then 7. In addition, as this has always been the case, the application of effects by a step (or shared action) has a lot of limitations, because you cannot set the duration of effect, or specify the path, if it is a motion effect. The only solution that I found and explained a long time ago was to create a custom effect to apply. But the workflow is quite heavy: first he must create the effect based on time with the correct time and settings, then you can save it, but it won't be available immediately in the drop-down list in the dialog of AA. You must apply the effect custom time once, before it becomes available. BTW, the default duration of the tint to apply is 2secs, which cannot be changed in the AA dialog box.

  I don't see your response to Ajit, for some reason, maybe because it is personal and I am just a user. My approach would be to replace the original button with a touch of the color that you want, something as I used in the dashboard in this blog: Captivate 8 - first adventures - Captivate blog

  Forums act as strangely today as effects in Captivate, now the answer to Ajit popped up.

  Text buttons will always have the appearance of the system buttons, you can not change their color. It can be done with text buttons but once again, I never use them more because the form buttons appeared. Those are much easier to style and offer more choices. Furthermore they can be used on master slides and timed for the rest of the project, and you can even insert on Question slides.

• Question of novice on the color in the document

  Need help please.  You figure at all now that I am a real novice here!

  I enclose you a screen shot of what I speak.

  I have 3 pieces that are the same color.  View where #1 is under #2 and it is all supposed to look like 1 room.  I tried moving it and moving back and the room always see in the background as a darker color.  What should I do?

  You work with transparency, I supoose you reduced opacity.

  Do you really want transparency or you want only a lighter color. You use a tone or a lighter color in the color Panel and not reduce opacity in the effect controls panel.

  When you're a novice, try to avoid the transparency at the beginning. Transparency is not a bad thing, but needs some information, that you have to learn before. I think that in the help file, you will find a lot of information about transparency.

• The color sampler tool display adjustments?

  If I place a point on an image and then making adjustments 10 is there a way to look at how the color sample will change with each setting?

  Now I have to go back to the individual layer "bg" I'll call her to see the new color information once the adjustments have been made. I would like to see how the color of the adjustment layer info is done for all BY making the adjustments.

  There is indeed something odd current.

  This is not the behavior I get from my side.

  Capture instant 1 displays values before adjusting: 128-105 - 57

  

  Now, I add a layer of settings:

  Because I don't have not already change anything the two values are always the same:

  

  

  Now I change the curve:

  

  end the Info shows both the old and new values:

  

  Now, I click on the layer of the image:

  

  and the info panel displays only the new values:

  

  If I click on the adjustment layer:

  

  Then I see the before and after values:

  

  I have PS CC, but that I can remember nothing has changed in this regard.

  If this is not the behavior you see that I suggest you trash the file. Whenever Photoshop strange which is always the first remedy to try.

  Kind regards

  Ronald

• by selecting the color with the Brush tool

  is it possible to choose the FOREGROUND COLOR while using the Brush tool?

  If I hold down the option key and click on the tool icon brush becomes the eyedropper icon, but click on produces only a COLOR of background.

  I know that the tool of the icon itself can choose fade in the foreground or background, but it seems that there is a way to choose the FOREGROUND COLOR while using the Brush tool.

  what Miss me?

  Thank you

  Vince

  It is possible that you have the background color of active play sample in the color Panel. Go to the color Panel and click on the foreground swatch (to make it active) and see if that makes a difference.

  

  MTSTUNER

• Try changing the settings of Vista firewall, but the configuration of the firewall Panel does not respond.

  I'm trying to access the port through the Windows Vista firewall.  When I open the firewall Panel and try to change the settings. The hourglass disappears and will not show the screen for changes.  So you can not close the firewall Panel.  Only way to get rid of it is to use the Task Manager and end task.  Any ideas?

  Hi wolfpackertom,

  Present on the computer some third party software may hinder the process.

  I suggest you try the following steps:

  The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Note: It is not recommended to fork or change options of windows firewall. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage from hackers and malicious software (such as worms).

  He may want to know:

  Understanding - Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  What are the risks of allowing programs through a firewall?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-risks-of-allowing-programs-through-a-firewall

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.