the data from the tables of production in Oracle in pipe delimited flat f

Hello
Please someone tel me the query how to extract data in oracle in pipe delimited flat files using plsql stored procedure as updates.plz incremental tel me its urgent

How to extract data in oracle in pipe delimited flat files plsql stored procedure

You can try utl_file.

and also do incremental updates.

This part, I do not understand. Updates of what? The above file?

Please tel me its urgent

Who cares.

Tags: Database

Similar Questions

How do to know all the tables on peoplesoft (on Oracle 8.1) with data
I need to know all the tables on peoplesoft (on Oracle 8.1) < strong > with < facilities > data
and ignore the tables without data.

It takes to write a pl/sql procedure or is there an easy solution?
I wrote an example of code, but I am disconnected programming
for the long and I need help.
Thanks in advance
Pls answer
_______________
Cursosr curtab is select table_name from dba_tables;
curtab() loop
Select count (*) x from curtab;
If x & gt; 0
UTL_FILE. Write ('curtab')
on the other
null;
endif;
end loop;
____________________
Julia wrote:
I need to know all the tables on peoplesoft (on Oracle 8.1) with data
> & ignore tables without data.
>
> It takes to write a pl/sql procedure or is there an easy solution?
> I wrote a code example, but I am disconnected programming
> for a long time and I need help.
> Thanks in advance
> Pls answer
> _______________
> Cursosr curtab is select table_name from dba_tables;
> curtab() loop
> select count (*) x from curtab;
> If x > 0
> utl_file.write ('curtab')
> other
> null;
> endif;
> end of loop;
> ____________________

Consider using the user_tables and it works the relevant schema rather than dba_tables breast or of all_tables as these allows you to specify the schema name too will require.
```
set serveroutput on;

DECLARE
  cursor curtab is
    select table_name
    from   user_tables;
  --from   all_tables where owner = '';
  v_cnt NUMBER;
BEGIN
  FOR t IN curtab
  LOOP
    EXECUTE IMMEDIATE 'select count(*) from '||t.table_name INTO v_cnt;
    IF v_cnt > 0 THEN
      DBMS_OUTPUT.PUT_LINE(t.table_name);
    END IF;
  END LOOP;
END;
/
```
Or...

Ensure that statistics were collected for the schema and examine the value of num_rows in the user_tables view. ;)

Inserting data from one table to another table
Hello

I have the following SQL where I am updating a table by adding new data from another table, but without success.

INSERT INTO
() TOP_PROSPECTS
COMMON_ID
DATE_ADDED
REVIEW_RANK
EVAL_DATE
PM_ASSIGN
WHY_NOTES)
SELECT
t.COMMON_ID
t.DATE_ADDED
t.REVIEW_RANK
t.EVAL_DATE
t.PM_ASSIGN
t.WHY_NOTES
Of
TEMP_IVAN_MARY t
WHERE
COMMON_ID <>t.COMMON_ID

Any suggestions?

Thank you.

Published by: user13822709 on August 14, 2012 09:14

Published by: user13822709 on August 14, 2012 09:15
Is that what you're trying to do with the insert. I think there may be a sign {noformat}<{noformat}{noformat}>{noformat} missing in the where clause. This site eat those, so you need to use the equivalent! = post here.

If I'm wrong about the missing trader, then it looks like you want to insert rows in temp_ivan_mary that are not already in top_prospects. If Yes, then you need something like:
```
insert into top_prospects
   (common_id, date_added, review_rank, eval_date, pm_assign,
    why_notes)
select t.common_id, t.date_added, t.review_rank, t.eval_date,
       t.pm_assign, t.why_notes
from temp_ivan_mary t
where t.common_id not in (select common_id from top_prospects
                          where common_id is not null)
```
Function index and data available volumnes etc. then a mergr can be more effective. Something like:
```
merge into top_prospects p
   using (select common_id, date_added, review_rank, eval_date,
                 pm_assign, why_notes
          from temp_ivan_mary) t
   on (p.common_id = t.common_id)
   when not matched then
      insert (common_id, date_added, review_rank, eval_date, pm_assign,
              why_notes)
      values (t.common_id, t.date_added, t.review_rank, t.eval_date,
              t.pm_assign, t.why_notes)
from temp_ivan_mary t
```
John

The table or view in oracle to Package information
Please give me the name of the table or view in oracle where the names of all packages are available and their associated procedures or functions... otherwise there is a way to inform
```
select text from user_source where  type='PACKAGE';
```
This query can give you defination all package you can know Members (stored procedures/functions/variables etc.) of a package.
But I have no idea about any explicit data dictionary view that lists all the members of the package defined by the user. Hope to see here as appropriate.

extract data from a table to a text file

I need to extract data from a table to a text file, I twist my output is the following...

bash-3. $00 vi tap3roamercosts_20110915144318.txt
lines of 'tap3roamercosts_20110915144318.txt' 393948, 23464348 characters
^ LAFGTD | N | 2011090203000001 | 13242514000064 | 1. 0 | 20. 41220 | 02-SEVEN.-11. 01-SEPT.-11. 0 | 13244
755. 64. 70. 0093794428588 | 0093796234547 | 0 | S2 | E | 412200306902634 | 8. 1. 61500 | 16081 |
| HW | Call to the Roamer. 0 | I have | Roaming billing Inroamer Plan | 1_0_1 | LKA | N_I_Independent
the time of day. Rate of Roamer SMST systems | AFGTD20110902030000010001013242514000064 |
|||||||||||||||||||||

AFGTD | N | 2011090203000001 | 13242612000044 | 1. 0 | 20. 41220 | 02-SEVEN.-11. 01-SEPT.-11. 0 | 13244
853. 44. 70. 234. 0093793252818 | 0 | S2 | E | 412200303198150 | 8. 1. 61000 | 12403 | HW | -Ro
bitter call | 0 | I have | Roaming billing Inroamer Plan | 1_0_1 | N_I_Independent time of Da
There | Rate of Roamer SMST systems | AFGTD20110902030000010001013242612000044 |
||||||||

AFGTD | N | 2011090203000001 | 13242612000047 | 1. 0 | 20. 41220 | 02-SEVEN.-11. 01-SEPT.-11. 0 | 13244
853. 47. 70. 234. 0093793252818 | 0 | S2 | E | 412200303198150 | 8. 1. 61000 | 12403 | HW | -Ro
bitter call | 0 | I have | Roaming billing Inroamer Plan | 1_0_1 | N_I_Independent time of Da
There | Rate of Roamer SMST systems | AFGTD20110902030000010001013242612000047 |
||||||||
.
.
.
.
.

Please help me how to format my output each record in simple lines in oracle sqlplus. Here are the settings I used...

TERMOUT OFF SET;
SET ECHO OFF;
SET LINESIZE 100000;
THE VALUE OF NEWPAGE 0;
SET SPACE 0;
SET PAGESIZE 50000;
SET FEEDBACK OFF;
SET THE OFF POSITION;
SET TRIMSPOOL
SET THE TAB

And what was wrong with the answers that you have on your previous thread?

How to extract data in a text file

Please do not ask the same question again. If there is a problem with the answers provided, then continue on the same thread that tell people what is the problem.

Saying that, this is another possibility for you...

As user sys:

CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
/
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/

As myuser:

CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                     ,p_dir IN VARCHAR2
                                     ,p_header_file IN VARCHAR2
                                     ,p_data_file IN VARCHAR2 := NULL) IS
  v_finaltxt  VARCHAR2(4000);
  v_v_val     VARCHAR2(4000);
  v_n_val     NUMBER;
  v_d_val     DATE;
  v_ret       NUMBER;
  c           NUMBER;
  d           NUMBER;
  col_cnt     INTEGER;
  f           BOOLEAN;
  rec_tab     DBMS_SQL.DESC_TAB;
  col_num     NUMBER;
  v_fh        UTL_FILE.FILE_TYPE;
  v_samefile  BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
  c := DBMS_SQL.OPEN_CURSOR;
  DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
  d := DBMS_SQL.EXECUTE(c);
  DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
  FOR j in 1..col_cnt
  LOOP
    CASE rec_tab(j).col_type
      WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
    ELSE
      DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
    END CASE;
  END LOOP;
  -- This part outputs the HEADER
  v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
  FOR j in 1..col_cnt
  LOOP
    v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
  END LOOP;
  --  DBMS_OUTPUT.PUT_LINE(v_finaltxt);
  UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
  IF NOT v_samefile THEN
    UTL_FILE.FCLOSE(v_fh);
  END IF;
  --
  -- This part outputs the DATA
  IF NOT v_samefile THEN
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
  END IF;
  LOOP
    v_ret := DBMS_SQL.FETCH_ROWS(c);
    EXIT WHEN v_ret = 0;
    v_finaltxt := NULL;
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                    v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                    v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
        WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                    v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
      ELSE
        v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
      END CASE;
    END LOOP;
  --  DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
  END LOOP;
  UTL_FILE.FCLOSE(v_fh);
  DBMS_SQL.CLOSE_CURSOR(c);
END;

This allows the header line and the data to write into files separate if necessary.

for example

SQL> exec run_query('select * from emp','TEST_DIR','output.txt');

PL/SQL procedure successfully completed.

Output.txt file contains:

empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10

The procedure allows for the header and the data to separate files if necessary. Just by specifying the file name "header" will put the header and the data in a single file.

Adapt to the exit of styles and different types of data are needed.

How can I insert data from another table into a table containing a timestamp column
How you insert data from another table in a table if the target table contains a timestamp column. I tried to set the default value of GETDATE() column in the target table, but it does not work.

I use MS SQL
Sorry, I managed to get around this by inserting null as the value

Migration of data from a table to another table
have a table1 that includes the existing data in the format.

~@!%~X1~@!%~Y1 in three different coulmns

creates a new empty table and the need to migrate the data above, which is present in 3 different columns in a column in the new table, as shown in the example below.

table 1 existing data (| separator of columns for formatting)
------------------------------------------------------------------------------------------------------------------------------------
ID name1 | Name2. Name3
123 ~@!%~X1~@!%~Y1 | ~@!%~X2~@!%~Y2 | ~@!%~X3~@!%~Y3
234 ~@!%~X4~@!%~Y4 | ~@!%~X5~@!%~Y5 | ~@!%~X6~@!%~Y6
456 ~@!%~X7~@!%~Y7 | ~@!%~X8~@!%~Y8 | ~@!%~X9~@!%~Y9

Table 2, which will initially be empty and after migration, it should look as follows.

ID name1
----------------------------------------------------------------------------------------------------------------------------
123 ~@!%~X1~@!%~Y1 & & ~@!%~X2~@!%~Y2 & & ~@!%~X2~@!%~Y2
234 ~@!%~X4~@!%~Y4 & & ~@!%~X5~@!%~Y5 & & ~@!%~X6~@!%~Y6
456 ~@!%~X7~@!%~Y7 & & ~@!%~X7~@!%~Y7 & & ~@!%~X7~@!%~Y7

as shown in the example above

Name1 column has ~@!%~X1~@!%~Y1
Column name2 has ~@!%~X2~@!%~Y2
Name3 column has ~@!%~X3~@!%~Y3

Once the data is migrating from table 1 for id - 123 looks like below, before joining data from 3 tables, I need apopend & & for each for the token I read of the tabl1 of name1 to end ii should be added "& &" also when I read the name2 I add "& &" at the end of the string before the concatination.

Here's the sample that deals with data for id - 123 with & & (only & & other symbols are part of the data)

~@!%~X1~@!%~Y1 & & ~@!%~X2~@!%~Y2 & & ~@!%~X2~@!%~Y2

need help in writing a note of migate

Published by: [email protected] on April 2, 2010 15:42
Hello

You are looking for something like this
```
CREATE TABLE table_new
AS
   (SELECT id, name1 || '&&' || name2 || '&&' || name3 name1
    FROM table1);
```
or if you have the table ready
```
INSERT INTO table_new
   (SELECT id, name1 || '&&' || name2 || '&&' || name3 name1
    FROM table1);
```
Thank you

Alen

data from 3 tables with later dates
Hello
Need help with the PL/SQL code, I need to write a code that will get the data from 3 tables with the most recent date.

For an individual ACT_CODE the output of the SQL query should display the data including the last dates back to 3 tables, if there is no
Date of the table, it should show the remaining data (think that the left join will do here)

Names of tables:
Institution_UPDT aiu
AC ASQ_CONTACT
GR_AUTHORIZE gr

All 3 tables have ACT_Code in common

Column names

INSTITUTION_UPDT IAU - IAU. ACT_CODE, AIU.project_id as proj, IAU. UPDT_TYPE_ID, IAU. User_id, IAU. UPDT_DATE

ASQ_CONTACT ac - ac. ACT_CODE as contact_code, ac.project_id, ac.first_name, ac.middle_initial, ac.last_
Name, AC.title, AC. Status, AC.status_date

GR_AUTHORIZE gr - GR ACT_CODE as grad_code, gr.name, gr.title AS grad_title, gr.submit_date

Are the names of the columns date
AC.status_date,
IAU. UPDT_DATE and
Gr.submit_date

Thanks to you all
appreciate your help

Jesh
Hi, Ngoumba,

If a given ACT_Code couldn't miss from any of the tables, then you will use better full outer joins, not a join left outer.

Perhaps it would be more effective to make a UNION of the three tables, then rotate the results in three datecolumns.

You can use the GROUP BY aggregation to get the last date for each ACT_Code in each table.
If you need other columns in the row which is the last date, you can use the ROW_NUMBER analytic function, like this:
```
SELECT  ACT_Code
,     updt_date
,     ROW_NUMBER () OVER ( PARTITION BY  ACT_Code
                          ORDER BY          updt_date     DESC
                  ) AS r_num
FROM    institution_updt
```
The lines with r_num = 1 are the most recent

This is a technique of ot the UNION-PIVOT example:
```
WITH     union_data     AS
(
     SELECT    ACT_Code
     ,       MAX (updt_date)     AS last_date
     ,       1                  AS table_id
     FROM       institution_updt
     GROUP BY  ACT_Code
UNION ALL
     SELECT    ACT_Code
     ,       MAX (status_date)     AS last_date
     ,       2                  AS table_id
     FROM       ASQ_Contact
     GROUP BY  ACT_Code
UNION ALL
     SELECT    ACT_Code
     ,       MAX (submit_date)     AS last_date
     ,       3                  AS table_id
     FROM       GR_Authorize
     GROUP BY  ACT_Code
)
SELECT       ACT_Code
,       MAX (CASE WHEN table_id = 1 THEN last_date END)     AS aiu_updt_date
,       MAX (CASE WHEN table_id = 2 THEN last_date END)     AS ac_status_date
,       MAX (CASE WHEN table_id = 3 THEN last_date END)     AS gr_submit_date
FROM       union_data
GROUP BY  ACT_Code
ORDER BY  ACT_Code
;
```
Published by: Frank Kulash, on September 16, 2009 15:02
Added UNION-pivot example

Extraction of data from two tables without discounting
Hi friends,

I have a problem I want to extract data from two tables without discount in the text field when I will enter any value in a text field, then the value of corressponding must come to textfield corressponding.

for example. There are two table A and B.
Table A has Colunm

S_ID number;
C_ID Varchar2 (30);
VARCHAR2 (4) s;

Second table B Colunm name

S_ID number;
What varchar (30);
L_Name varchar (20);

When I enter in a text field then the c_id 101 s_id, dry, first_name and last_name should come to corressponding text without refresh fields.

How can I do that.

Thank you
Maury
You can use Ajax and there are tons of good examples out there for this purpose;
For example [http://apex.oracle.com/pls/otn/f?p=31517:236:1876567353842241]

Need information about the Tables in database in Oracle Apps

Hello
I am looking for information about the Tables in database in Oracle Apps.
Is it possible that we could see the (column name, description of each column, the primary key, foreign key etc.) the table structure in database (e.g. HZ_PARTIES, CS_INCIDENTS_ALL_B, csf_debrief_headers) used in Oracle 11i applications?

ETRM. Oracle.com

concerning

Pravin

Extracting the data from relational tables in 11.1.2.1
I want to extract the following data sets from relational tables
1 attribute and his partner basic member
2 Smartlist value of an account

Have a code to extract such data? It will be useful in pointing to the correct table names.

Thank you
You will find the table schemas in the [documentation for EPMA | http://www.oracle.com/technetwork/middleware/bi-foundation/epm-data-models-11121-354684.zip]. If this does not work, there are other options to export hierarchies in text files. You can use the lifecycle management or the [EPMA line Generator | http://docs.oracle.com/cd/E17236_01/epm.1112/epma_file_gen_user/launch.html].

Kyle Goodfriend
http://www.in2hyperion.com

Please make sure that you assign your post as answered when an appropriate response is provided (or useful when it takes place) as well as other benefits.

Repeat the extensible data from a table in a new

Hello
I managed to create a table in LC designer4 growing - IE. It is a four-column table with a header line followed by a line where I can add information in three table cells. If I need to have another line I click on the line button Add (placed in the header row), and a new appears. There is also a button that can systematically remove deleted a row. I'll call this my parent table.
So far so good.
Maybe it's better to explain exactly what I'm doing here...
My parent table is a kind of to-do list he calls table X. Each column is as such: 1. what to do 2. who will do 3. When she will be
It is extensible, so if there is more than one action to be carried out it will add extra lines.
I also want to create a new table that is an update on the list to call this table Y:
column a. what needed to be done (these data are extracted directly from column 1 on the to-do list) column B: at - it to happen? column C: if not, why - columns B and C are new and do not pull the data from the to do list.
The problem is twofold: how repeat the data in the column 1 (given the fact that I can't use global data binding as column 1 can have several different entries), and if I can get past this first hurdle, how can I make automaticall table expand to the same amount of lines in table X?
I should mention that I'm a designer so my programming expertise is severely limited. I managed to create the first table by watching the tutorials rather than find out myself. As far as I know the first table is done in javascript.
Any help would be greatly appreciated!

You need to loop through the tables and copies the data from the field.

You have to adapt the example below for your table names and the reference field.

Table1 = table to copy from

Table2 = table to copy to

Row1 = name of the rank that the fields are

ColumnA = the name of the field being copied

Here is the script (put it on the Click event of a button):
```
Table2._Row1.count = Table1._Row1.count;
var vCol1 = this.resolveNodes("Table1.Row1[*].ColumnA");
var vCol2 = this.resolveNodes("Table2.Row1[*].ColumnA");

for (var i = 0; i < vCol1.length; i ++) {
             vCol2.item(i).rawValue = vCol1.item(i).rawValue;
}
```

Copy data from one table to the new table
Hello

I copy data from columns of a table to another table and my query is
INSERT INTO TestTable (empno, empName, deptno)
SELECT empno, empname, deptno
WCP

and it works fine but I want to insert a data column in testTable based on emp.deptno
as if emp.deptno = 10 it will add 1 to the testtable.class column,
If emp.deptno = 20 it will add 2-column testtable.class,
If deptno = 30 it will add 3 to the testtable.class column,

TestTable structure is
EMPNO NUMBER (20)
ENAME VARCHAR2 (50)
DEPTNO NUMBER (20)
CLASS NUMBER (20)

Can someone please help me write this procedure.
Thank you
You can use a case statement as
```
INSERT INTO TestTable (empno, empName,deptno,class_column )
SELECT empno, empname,deptno, case when emp.deptno=10  then 1
                                   when emp.deptno=20  then 2
                                   when emp.deptno=30  then 3
                              end
FROM emp
```
See you soon
Katia

How to publish data from a table using the form
Oracle forms6i

Hai All

I have download the data to the table of forms...

My table T1 columns are in, out, intrinsically, introut, empname, empno

and another table T2 consist of three columns is empno, date, time

In table T2 time fields consist of symbol I, o... I mean IN, O OUT

My Question is when an employee consist of 3 I - the three IN the time

0815 I, 1200 I, 1415 I and OUT 3 times O 1245, 1445 O, O 1715 and empno is 001

If there is no record for empno 001 then insert first 0815 I in table T1 in column IN time then

to update 1200 intrinsically and 1245 update to Introut and 1415 up-to-date addin and 1445 to update addout

Finally in 1715 to outtime

If it is possible to do without Hardcoding the moment Pls tell with some good example

Thanks in advance

Srikkanth.M
There now things are clear... whenever I have free I'll post the code u how to do this...

for now, a few tips can help u

-create the table to store operations travel so then u can't fix your code

-Create the cursor on the T1 line through all the records.

-Control what empno and action i.e. the current cursor (I or O) exists on the same date in T2 or not

-otherwise exists insert a new record check also the SHIFT is coming in time IF is between MAJ 0815 and 1645 and action is 'I' then insert record and column values accordingly

s ' there is, then update the record of the place where empno = cur.empno and attendance_date = mydate;

It may be useful

Baig,
[My Oracle Blog | http://baigsorcl.blogspot.com/]

Reading data from a Table by using the loop

I have a dynamic array within the PDF form. I want to loop through the rows in the table and read the contents of the cell. I successfully get the number of rows in the table. But impossible to read the values in the cells. I put control TextField (txtName) editable in every cell and trying to read its value.
screenshot is below.
I use the code is:
```
 form1.Page1.Subform1.btnReadTable::click - (JavaScript, client)

var rowCount = MyTable._Row1.count;
app.alert("Row Count: " + rowCount);
var i = 0;

for(i=0 ; i<rowCount ; i++)
{
    //app.alert(MyTable.Row1[i].txtName.rawValue); // NOT WORKING
    
    app.alert(MyTable.Row1.txtName.rawValue); // WORKING, But just giving the value for the first row.
}
```
Please tell me how can I get the value of each name in all ranks by making a loop.
Thanks in advance.
-
Afonso

Hi, Afonso,

You must resolve the node for the particular case of i. The syntax is:
```
xfa.resolveNode("MyTable.Row1[" + i  + "].txtName").rawValue;
```
Here there is an example that will show you the loop in action:

http://www.assuredynamics.com/index.php/category/portfolio/two-way-binding-in-tables/

Hope that helps,

Niall

Ensure the dynamics

the data from the tables of production in Oracle in pipe delimited flat f

Similar Questions

Maybe you are looking for