The data in a loop of consumption does not evolve
Help!
I am reading different voltage to an interval of 500ms in a loop of producer and move to the consumption loop. However, I notice that the values in the loop of the consumer do not change even when the voltage has changed?
What can I do?
You're probably stuck in inner loops. Given that the value of the voltage of the capacitor is powered in from out of the loop, this value will be used only inside the selection loop until the loop stops running. Thus, if the first capacitor voltage is lower than the upper threshold voltage, then the inner loop in the load case will never end.
You don't need the inner loops at all. You want to test against thresholds exactly once for each reading of the voltage. The lead of the comparison to a case structure. If the condition is true, write to the output channel and change the State. Otherwise, do not write and return to the same State on the next reading.
Another thing. When you stop the program, you can set the output before close so your capacitors do not sit it loads.
Lynn
Tags: NI Software
Similar Questions
-
I bought a new concole. I transferred all my data, except the pfofiles of xbox live. It does not accept my password or security question answer. I don't get a password reset email.
Hello
-What is the new console you bought?
-What is the exact error that you have found and where are you?-Is the XBOX password which is not accepted.
If there is a problem with the XBOX, I recommend you ask your question on the forums xbox for better assistance.
http://www.Xbox.com/en-us/forumsPlease provide us with more information about the issue so that we can better help you.
Suggestions for a question on the help forums
http://support.Microsoft.com/kb/555375 -
A model of TV Sony KDL-32BX330 has somehow display the date or time? MENU button does not
A model of TV Sony KDL-32BX330 has somehow display the date or time? The button MENU has no option to select or adjust the time or date... maybe a new firmware?
Hello, manual,.
There is no option to display the time and date of the TV Sony KDL 32BX330.
We cannot comment on future firmware updates, nor can respond us if a product will not in the future it does not currently feature.
If my post answered your question, please mark it as an "accepted Solution".
-
HP Deskjet 2132: The date showing on my screen but does not print on the sheet.
The header and the footer shows on my computer screen, but it does not print on the print current sheet.
I tried the solution, but it did not work, and the strange thing is that if I change from Portrait to landscape of the date part prints but not all of it. 21/02/16 just found the problem. I was using the Google Chrome browser and I switched to Mozilla Fire fox. Walla, the problem has been resolved. Thanks a lot for your help. I don't know much about computers so I'll have more questions later.
-
I tried to re-indexing and dragging, but nothing happens. I also tried tweaking permissions, removing .txt in the apple loops index file - as other solutions I've read in the Apple community, but still no loops in the browser. Someone had this problem? I'd appreciate the help.
El Capitan 10.11.5
The index of Apple Loops loops for the version of the logic you are using is stored in...
~/Music/audio music Apps /Databases/LoopsDatabaseV09.db
Delete this file - then try to re - indexing loops.
-
Anyway to save the data in a loop without using shift register or feedback loop
Hi all
I've been thinking, is it possible to save data in a loop to the next iteration without the use of a shift register or a feedback loop?
I need the possibility to reload the data within a loop from a file of lvm, but I want to use the same data until I have load some new.
The reason why I don't want use the node registry or feedback shift is due to speed, although I don't know if the registry change
in fact moves all the data of one register to another, or if it is stopped until a change data occur.
I want to reuse data medium and large (6 measure of strength, pressure 2, 1 flow channels) of about 10 s data in each file with samplingsrate of 2 kHz...
In my testing program, I have several CPU demanding computations and 3D graphics, so I want just to minimize the CPU loading as much as I can for each part of the
software...
I am enclosing a small VI to explain what I mean.
I have now, I shouldn't use the express VI and I'll change that as well - it's just a proof of concept!
Hope you guys can help me better understand this shift register...
Thank you!
-Tommy
If the speed is the name of the game, go with the flow (data) and stick to a shift of registers or feedback node. No data is moved, their job is to do pretty much exactly what you describe. Any other solution, control/locals/globals will imply a copy of the data, and then you will have problems with speed.
-
What can I do?
A
In the menu bar, you select
▹ System Preferences... ▹ Notifications application icon ▹ Mail ▹ Badge: on
If the badge is still not displayed or displays the wrong count, see below.
B
Please stop Mail. Force quit if necessary.
Back up all data before proceeding.
If you use OS X 10.11 ("El Capitan") or version later, triple - click anywhere in the line below on this page to select:
~/Library/Mail/V3/MailData
If you use an older version of Mac OS X, use this line:
~/Library/Mail/V2/MailData
Copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select
Go ▹ go to folder
in the menu bar. Paste in the box that opens by pressing Command + V, then press return.
A file window opens. In it he must be files with names as follows:
Index of the envelope
ExternalUpdates.storedata
Move these files to the desktop, leaving the window open. Other files in the folder can have names more long that begin as above. Move these files, if any, in the trash.
Mail recovery. It should invite you to re - import your messages. You can get a warning that the index is corrupted and that Mail must quit smoking. Click OK. Generally speaking, the process takes a few minutes, but this can take hours if you have gigantic mailboxes. In this case, you will be able to speed things up temporarily by adding your file to the list of personal information protection in the Spotlight preferences pane. Remove it when Mail has finished importing.
If the import operation stalls or fails with an error message, quit Mail, delete the two new index files (maintenance of the original that you moved to the desktop) and try again. According to several reports, the second attempt can succeed if one does not.
Test. If Mail now works as expected, you can delete the files that you moved to the desktop. If not, post your results.
-
To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.
Hello m.velentino,
Not sure if you are still having the error message isn't valid win32.applicaiton.
Get the error: not a valid 32-bit application can have several origins:
I have listed some of them below.The file is corrupted, bad or missing.
-If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
-If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.File is not designed for your version of Windows:
-If you try to run a program that is not designed for your version of Windows, you can get this error.
-Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
-If the program is an MS-DOS program more former start program or Windows, you can get this error.
-If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.File is a virus, worm or other malicious program file.
- This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
-If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
Hardware incompatibility.
-If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
-Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)Let us know if these suggestions help you.
Marilyn
-
Hello
I use ORACLE 11g R2 & RHEL 5 DB.
My task of bottom line is I want to send an AWR & ADDM report by mail to myself and the other members of my team all the hours for a particular user. I did a procedure for the same thing. When I perform this procedure from the sys user then it is run successfully and we even receive emails with attachments well. When I try to run this procedure from the particular user, it gives me the following error: -.
"ORA-13605: the ADDM:1987121644_4118 of task or a specified object does not exist for the current user."
When I explored my procedure, I found that the error was in the query that is used to generate the report of the ADDM. The same query within an enforcement procedure s successfully with the sys user, but not in the other user. The query is as below: -.
When I accessed the sight of dba_advisor_tasks separately then I saw that each task the ower name was "SYS" user. So its gives me error when I have the fire of the other user. When I run it from SCOTT I get the following error: -.select dbms_advisor.get_task_report(task_name,'TEXT','ALL') as ADDM_report from dba_advisor_tasks where task_id = (select max(t.task_id) from dba_advisor_tasks t, dba_advisor_log l where t.task_id = l.task_id and t.advisor_name = 'ADDM' and l.status = 'COMPLETED')
I tried to use the view data dictionary with 'USER_'... like USER_advisor_tasks, but this returns null if it doesn't produce any report ADDM.ORA-13605: The specified task or object ADDM:1987121644_4017 does not exist for the current user. ORA-06512: at "SYS.PRVT_ADVISOR", line 3189 ORA-06512: at "SYS.DBMS_ADVISOR", line 590 ORA-06512: at line 1 ORA-06512: at "SCOTT.SEND_MAIL_FOR_AWR_ADDM_REPORT", line 72 ORA-06512: at line 2
What should I do to run my (other than the user SYS) user SCOTT procedure and must generate the ADDM report.
Thanks in advance.Look at the signature of the function:
function get_task_report (task_name in varchar2, type in varchar2 := 'TEXT', level in varchar2 := 'TYPICAL', section in varchar2 := 'ALL', owner_name in varchar2 := NULL, execution_name in varchar2 := NULL, object_id in number := NULL) return clob;
See owner_name.
So:
select owner,task_name, dbms_advisor.get_task_report (t.task_name,'TEXT','TYPICAL','ALL',t.owner) as ADDM_report from dba_advisor_tasks t where task_id = (select max(t.task_id) from dba_advisor_tasks t, dba_advisor_log l where t.task_id = l.task_id and t.advisor_name = 'ADDM' and l.status = 'COMPLETED');
-
the update of firefox 28 for mac does not, the bar just rotates, I can't get the update
the update of firefox 28 for mac does not, the bar just rotates, I can't get the update. Thank you
Hello
Try to get the full version here:
Then just install it.
-
Question
I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.edit, escaped mod < s > in order to avoid the line through question
A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try
ALT + SHIFT + S
and see if it works.
I don't know of any way to change this so that the change is not necessary. There may be an add-on?
-
my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
Once iTunes to work properly, you should be able to fix your device.
TT2
-
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you have currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert a different SIM card of a carrier supported or to ask that this iPhone be unlocked by your operator. For more information, contact Apple.
< re-titled by host >
Not sure what your question is. The error message is clear: the device is locked to another carrier. It must be unlocked before you can use the SIM card, you try to use. Contact the carrier to get it resolved. Only they can help you with this.
See you soon,.
GB
-
The iTunes upgrade issue in early 2015 does not not on OS 10.6.8. How I found an earlier version of iTunes?
General search for versions of iTunes available - http://support.apple.com/downloads/#itunes
Note: Running an old version won't sync with a device iOS9. The only way to do is run a new version of the OS.
-
The button create a new paragraph style does not work for me, is this a bug or something stupid I did?
Pages on El Capitan 10.11.1 v5.6.1.
I just created a quote indented using ITC Garamond Book Italic with left and right margins altered. Well selected, I clicked on the + symbol in the paragraph, named the new Styles pop-up style Indented quote and you press return.
Always selected in the body of the document, I applied the body paragraph Style to restore the normal formatting and then with the text again, the paragraph of citation Style indented - who worked as expected.
If you want that your new Style of paragraph to survive across documents, you will need to save it in a model. You can also have two different Pages, documents open in Pages v5.6.1, and copy/paste the custom styles between the selected text in these documents by using the Format menu.
Maybe you are looking for
-
Bluetooth stopped working, no longer have a Fn + f5 command?
Hello I use my Lenovo Y530 for some years now with little problem, but something happened recently that I can't explain. I left Windows Media Center open for an extended period, which caused my computer to have a major freak out. I tried to stop, but
-
Icon Message Email of blackBerry Smartphones WON'T go!
I have an icon on my phone indicating I have 2 e-mails waiting to be read. The icons were already here before I updated the operating system, after update I went to the Inbox and there was nothing, So I deleted the Inbox, and Setup again my e-mail se
-
How can I convert a PowerPoint file to share with someone who doesn't have PowerPoint?
How can I convert a PowerPoint file to share with someone who doesn't have PowerPoint?
-
System.out.println ("New Record");BindingContext exDup13 = BindingContext.getCurrent ();System.out.println ("kjjk45345323245");DCBindingContainer dbDup13 = (DCBindingContainer) exDup13.getCurrentBindingsEntry ();System.out.println ("kjjk45345345");DC
-
HelloI just finished the free 30 day trial of Adobe Acrobat. I went and downloaded a paid version of the software (but with less features). I had to remove the upgraded to this version. I have paid but now cannot find the program on my laptop (whi