The firmware download

Similar Questions

• LaserJet CP4025: How long should the firmware download via ftp for LJ CP4025 since Windows 10 take?

  I started ftp - ing fw_7.220.2 to a 10 (64-bit) Windows CP4025 nearly two hours ago.  The printer says "receiver upgrade" screen, th prompt commands on the computer is not yet at the command prompt.

  Should I give up?  If so, how can I go about safely?

  Thanks for any suggestions.

  -Joanna

  This is where I downloaded, but just didn't know that I can run the exe file in the second download.

  So I should all download by turning the printer off?

  -Joanna

• 8610 all-in-one printer: I can't download the firmware update to remove the dynamic security

  "For not original hp ink users an update of the firmware option to remove the dynamic security is now available for select Officejet, Officejet Pro printers Officejet ProX."

  I have bee patiently for the "fix".   Following the posted signs: http://support.hp.com/us-en/document/c05308850?openCLC=true

  Step 2) "click your HP printer model in the table below and run the file to update the firmware downloaded from your Internet browser."

  Seems to have no option to run the download of my Internet browser.

  I use Safari (and that's all I intend to help).  When I click on the download, I get an error message that says: there is no application to open the file. I tried to right click 'open with' - any of these options are internet browsers.

  Can you offer any help?

  Hello

  Option updte to remove the functionality of dynamic security listed in the document is only intended for a Windows PC.

  Download and install the update by using the following link for Mac OS:

  http://FTP.HP.com/pub/softlib/software13/printers/OJP8610_R1640B.dmg

  Kind regards

  Shlomi

• Toshiba 40SL980G - the Youtube app after the firmware update.

  Hello

  So today, I've updated the firmware of my TV (40SL980G) and after the update of the youtube app is missing and also the social place of Toshiba places is not accessible.

  I did reset TV after the update.
  I checked the firmware download page, but this model is not which are listed there.

  Someone here could help me on how to solve this problem I would really appreciate it.

  They are probably going to change something in the places of Toshiba.

  If a new firmware update is available, try to install the latest version.
  Otherwise I recommend the service Toshiba Places in the next few days again.

• WRT610N Version 1 - broken to the firmware link.

  Title pretty much everything said. The Support page has an option to download the new firmware for hardware version 1, but the link is broken. I'm pretty upset that the customer service guys do not have fiogured it out & it fixed yet

  As sabertooth has mentioned, the Firmware download link works perfectly. It could be your browser, try using Firefox and check if you are able to download the firmware on your router...

• Where to download the firmware for Toshiba 19BL502B TV

  Hello

  Is there a place where I can download the firmware for my Toshiba 19BL502B TV, so that I can install on a USB key and update?

  I've already asked about the firmware that supports Xvid in the forum "New TV model Discussion", but had no luck. As I said in my previous post, the online manual for the machine indicates she has support Xvid, while my paper manual is that the part removed.

  My previous post was:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=134

  And here you see a photo with a comparison of the two manuals.
  I seek to change the firmware of the TV so that it supports Xvid, whether a new firware update or an older one.

  Thank you

  Frank.

  Hello

  Have a look here:
  http://www.DL.Toshiba.com/dly/index.jsp?region=GB&lang=en

  This is the place where you can download the firmware for Toshiba TVs

• 40L5443DG TV: how to download the firmware no TV?

  Hello
  my internet connection is 3G.
  So, I fear for my smart tv 40L5443DG to connect to the 3G internet.
  I would like to download the latest firmware on a personal computer instead.
  I would also like to know the firmware change log, before update!

  Where can I see for my smart TV?

  Best regards.
  Mike (France)

  Currently you can not download the USB SW update for your model, it can be added at a later stage. Please, use the method to update the network for now.

• Is there a way to download the firmware from a GUI Labview for an Actel FPGA or an ARM processor?

  I don't know if it's possible, but I have a couple of test that must be accomplished where several firmware is requested to be downloaded on the pcb. So, whenever I need to open Flash Pro (microsemi) and download the firmware for the Actel FPGA and then come back to labview. I wonder if there is a way to do it since my labview Vi so firmware will download automatically?

  Thank you

  You should be able to make TCL scripts inside your Flash Pro software.  They have a macro generator which will just imitate what you do.  Save this TCL file.  You can then load Flash Pro via the Exec System with a parameter pointing to this script file.  Flash Pro will then run this script and close once.

  

• LaserJet M4345 MFP firmware upgrade failure using the HP Download Manager

  Hi all

  I have a LaserJet M4345 multifunction printer, and I tried to see if there is any updated firmware for the printer.
  When I try to access the web configuration interface, I see that the printer is running a firmware with 20070213 code 09.071.8

  I downloaded the software from the HP Download Manager to try to update the printer automatically with a simple procedure.

  The program finds the printer and said that she needed upgrade. He showed that the printer is model J7949E and current firmware V.33.14 while the update of the Firmware version has been V.33.21

  I leave the program to start the process of update, but as soon as I said to start the update immediately (do not), a new window will appear showing the status of update and it closed after less than a second, replaced by another saying that the firmware update was complete.

  Although I was skeptical about the process in so little time, I tried to check again the printer web configuration interface, but it showed that the firmware was always the same, I saw earlier (20070213 09.071.8). To try to detect the printer from the Manager software download HP found that the printer was still need upgrading (and asked me if I wanted to do now). Try once led to the same results.

  I tried to restart the printer, the program and the computer with no result.

  I'm running Windows 7 32 bit and the printer is connected to the router which I connect this pc wireless.

  If I can provide any other information, please let me know.

  Thanks in advance for any help you can provide.

  Piero

  Hey Unreal, the product that you have is a printer. These commercial products can be a little tricky. For the best chance of finding a solution, I would post in the forum for HP Business Support.

  You can find the Board Commercial LaserJet here:

  Business - LaserJet HP Support Forum

  Take care!

  Sean

• WRT54GX4 - "the firmware/driver for this product is no longer available for download."?

  "(The firmware/driver for this product is no longer available for download. "We regret any inconvenience that this may cause you.) »

  What is the meaning behind it all! I mean I get that the WRT54GX4 is 5 years and more, but lights up! Why delete the firmware of the site?

  Does anyone have a copy of the latest version, they can download? It would be greatly appreciated.

  Yes, please go to this site.

• How can I download the firmware for another platform

  Hello. I am trying to download the update of firmware for WRT160N (HW ver3) for a router connected to a XP machine.

  I download a bin file from a Mac and the download page for show me, but I think that's a Mac - I need the (32-bit) version of Windows XP (exe file)?

  Anyone know the direct link to download XP?

  p.s. I can't connect the XP machine to the Internet, it should be uploaded on the Mac.

  Firmware is not executable.  You downloaded the bin file, which is the firmware file.  Access to your administration pages of routers and fine to the firmware upgrade section and follow the instructions, and that it points to the bin file.

• What is it? Is it safe to download the firmware

  What is it? Is it safe to download the Firmware?

  

  And what is Xperia with Facebook...?

  When I login my Facebook with facebook...

  He stated on the Notification

• Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type

  Title: download original ROM files on Vista

  Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type. Patches?

  You must get the update of the firmware that can handle the type of file the same place ROMA, you got the firmware file.  From what I see, they seem specific to the product updated. http://www.FileInfo.com/extension/ROM if they don't have it, talk to their technical support staff and ask them what type of program is required to install the firmware provided in ROM format and where you can get it.  Vista doesn't have the ability to read a file ROM type  Some software must be added to give this capability.

  Here is an article I read: "various hardware upgrades and emulators use the ROM file extension." A user needs a flash program usually available on the website of the manufacturer of the motherboard. The user must not flashing BIOS unless the user knows that he has the image of his mother. An error or the computer may be turned off when the wrong BIOS image is flashed. "So be very careful here, or you can completely disable your system.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• U2410, download the Firmware?

  Can someone please tell me where I can download the Firmware for my Dell Ultra Sharp U2410 monitor that I bought in December 2010. All my predefined modes have a pink tint to them, outside the personal color, which I had to use, I wonder if the new firmware fixes and makes other presets usable.

  Thank you

  Paul.

  Hi Chris,

  I tried five times, the gray screen does not appear, just a black screen that says no hdmi cable in a moving box, I pressed and held down the first and fourth at the same time, don't just go on any diagnosis, I did this correctly, it will not just go into the Diagnostic mode.

  If you can give me a link to download the latest firmware, I can Flash the monitor to see if this fixes my problems.

  I was happy using the color setting customized for the past five years, it of just that I now put in place a good system with a very good graphics card and wanted to see how I can get my settings, such as the use of other parameters such as the Adobe RGB, without all the different levels of pink hue, I get on all the other parameters outside the custom color.

  Best wishes

  Paul.

• I downloaded the firmware on my computer, my EWS does not appear after uploading. Help!

  try connecting my wireless printer, it's a M1217nfw MFP lazerjet. 7 is a 64-bit window.

  I didn't update my operating system, I had no problems with the error. I had just downloaded the firmware on my computer. Someone posted that you could do it manually and put your IP address in a web browser and the built-in Web server would jump to the top... Not happened in both cases.

  If someone could tell me if the firmware is actually downloaded on my computer, what would be useful. (a step by step to download the firmware).

  Not a problem at all. Please show support for the community by clicking on the Blue Star of congratulations in the post so we have solved your problem.

  Thank you!