The generator of Document can be stored on the physical documents generated to be accessible afterwards?

Similar Questions

• The system restore points, how can be stored/kept?

  I had problems restore XP on the computer of a friend.  I can't after installing SP3, a question that will be asked in a separate post.

  In an effort to not having to do a full system recovery on the computer in question, with this latest attempt to recover the operating system and install all updates, I started the creation of restore points for the system after each step, I took to get things running and upward.

  And that is, after installing SP3, with installation fails and then going back until the restoration of the system to an earlier configuration, I found none of the points longer existed the system restore.   :-(

  Is there a maximum number of restore points in the system that can be stored in XP and later Windows operating systems?

  Hey, Jose,

  I'm sorry for the late reply to your post, but I removed the weekend baby a bad back that makes me mad.

  I'll try to put your comments in quotes, with my response immediately after, flea.

  The hard drive is 160 GB.  The car had 2 partitions, the recovery partition.  Before reinstalling everything from scratch, I've used Easeus Partition Manager Home Edition to create a 3rd partition to move the original data of C:\ drive to your new partition so my friend can sort files and keep it as he and his family want and discard the rest.  I just copy everything that I can, because I don't know who, what, and where they have stored files.  I actually found a file stored in the recovery partition, but I moved it.

  "Here are some reasons that XP will remove RPs.

  'http://support.microsoft.com/kb/301224 '.

  • Read the KB article.  To make sure that we are on the same page, I get "system drive" means C:\.
  • Lack of free space should not be a problem.  C:\ is 32 GB, 10.1 GB used.  D:\ is 111 GB, GB used 21.2.  E:\ is 5.98 GB, used 5.00.  E: is the recovery Partition.
  • No disk compression
  • Did not display the warnings system restore.
  • I do not turn off System Restore fo any player.
  • This isn't an upgrade of the system to an earlier version, I just turn on the computer the way it came, new out of the box.
  • The system was always restored from the recovery Partition.  I have a set of restore CD, but they have been written about the recorded side with a felt marker.  I have not tried cleaning off the coast, this will be my absolute last resort.   :-)
  • Disk cleanup does not give me tabs and options as mentioned in the article.  I guess that these show upward when you upgrade from a previous version of the operating system.
  • I don't think I'm under low disk space.    :-)
  • Does not not after the age of 90 days, nor have I have reduced the size of the data store.  I didn't know either of these possibilities before you read this KB.  See how the KB has been written, I suppose that these two parameters can be changed.  Can you point me in the right direction for how to do this?  I have a computer multiboot (XP Pro and Vista Ultimate Edition) and I would change the date of age never delete a restore point, because the computer is rarely used nowadays.

  "I don't know that when you install SP3 and it goes well, a single method to uninstall SP3 is to restore the system to the time before SP3 was installed:

  http://support.Microsoft.com/kb/950249

  This would mean that you would still RPs after that installation of SP3 (if things were favorably) and that was my observation. »

  • When I started to have problems, I simply started from scratch with a Destructive Restore process.  When I'm really frustrated after several failures, I started looking for a quicker way to get back to a point just before I installed SP3 and found this KB.  After that, it was the safe boot mode and using the Control Panel Add/Remove programs to remove the SP3.  And I got very, very familiar with the process!   Laughing out loud

  "Other things I can think can remove all restore Points are third party maintenance and system cleaning tools, poorly designed or introducing a third part malfunction anti malware tools, etc..".  Malicious software can disable the system restore (temporarily of course), but I never saw remove Restore Points.  The XP disk cleanup will also delete all but the most recent restore Point. »

  • Other Easeus Partition Manager, I never got far enough along to try any other third party software.  My "modus operandi" is updated completely OS and Internet Explorer before I install any other software and update it.  However, with the idea of the recovery Partition, do not not the software isn't an option.

  "If they are all absent, it always seems that a human element involved somewhere."

  • I learned long ago, the days of 8-bit, unless there is a real hardware failure, almost all computer problems can be tracked to a human being.
  • Not all system restore points were missing, just the first I created which is involved by creating a restore point after you change the system, such as the removal of my friend doesn't use software.  For example the software to connect to an ISP with a modem.  They got the DSL.   :-)
  • All deletions of software would help speed up the computer for his own use.  The rest of the family is like me today, Mac users.   :-)

  "To answer your question:

  The settings default for the accumulation of Restore Points is 12% of the size of the monitored hard drive or 90 days (both values are adjustable of course).  Microsoft seems to draw attention to the way in which the Restore Points "live."   "Then, the oldest Restore Points will start to get deleted to make room for new Restore Points (see also KB950249).

  • 12%, eh?  Is it possible, in fact, I have exceeded this number by 12% by creating too many restore points?  Knowing what I was doing, which seems to be a possiblity says, as restoring all points were never deleted, only the earlier.

  I'll certainly post the info you suggested in the post on the SP3 forum.

  "Do or do not. There is no test. »

  • "Luke, the force is with you." :-)

• Where can I find the physical files of APEX_APPLICATION_FILES

  Dear Expert,.
  
  I got the files from 'SELECT id, name FROM APEX_APPLICATION_FILES' list
  
  F1761593527/f101.sql 1605213787030003
  F928641689/f101.sql 1605004091027283
  F1237766750/Doc1.rtf 1686620894182663
  F1530590835/blebul1a.gif 1687611599284065
  F1328258633/lippologo1.jpg 1609417775069075
  F199693486/Doc1.rtf 1685122925154852
  F1852805503/SQLAnywhere12_Full.exe 1682930319090730
  1683026294099067 F796050035/new document texte.txt
  1683131489100554 F823097404/new document texte.txt
  List.RTF 1683316167115060 F747145779/product
  
  where can I find the physical files?... It also removes the physical files if I run "DELETE FROM APEX_APPLICATION_FILES WHERE ID = '1682930319090730'?
  
  Please notify
  
  Thanks and greetings
  Luke

  Hello

  Yes, you can use delete statement to delete the file.

  Kind regards

  Patel Kartik
  ------------------------------------------------------------------------
  http://patelkartik.blogspot.com/
  http://Apex.Oracle.com/pls/Apex/f?p=9904351712:1

• iPad Pro. The keyboard can be used remotely (not physically attached) or you can use a standard apple wireless keyboard

  iPad Pro. The keyboard can be used remotely (not physically attached) or you can use a standard apple wireless keyboard

  I assume that you mean the keyboard built into the 'smart cover' - it must be in contact with the iPad.

  A wireless keyboard Apple has been reported as working with an iPad Pro. Plug Apple for the new State of "magic keyboard" that it requires a Mac with os x 10.11 or later - he does not mention the iPads. Third-party Bluetooth keyboard should work.

• What type of file can be stored in I cloud drive... I was told only pdf and pages, numbers and keynotes... is that correct?

  What type of file can be stored in iCloud drive... She was told only pdf. and apps pages, numbers and keynotes... is that correct?

  You can store any type of file in iCloud drive.

• How to export a user instance data and import it into another instance of a directly without storing the physical file.

  Dear all,

  I need your help I need to export data from user a (1 instance) and import it on another an instance without storage on location.

  I used to do as an export of data about the physical location and then import into another instance where I stored the dump file on physical location.

  Now I don't want to follow these method (standard method), is there any way possible means kindly share with me. Thank you very much in advance.

  Dear VA Napoleon,

  Thank you for your immediate response. If it's possible means gives the example script.

• If I buy 1 license of creative cloud I can open it from different workstations in the office, or is - this only accessible from 1 desktop computer?

  If I buy 1 license of creative cloud I can open it from different workstations in the office, or is - this only accessible from 1 desktop computer?

  Lmwhitfield please see Creative Cloud on 2 PCs where this subject has been discussed.  I also recommend searching the forum, because it is a common theme in the Adobe Creative Cloud forum.

• How the physical machine can communicate with the virtual machines as well as the internet should work on a virtual machine

  Hi team,

  I ask that you forgive for asking a silly question without doing a free search.

  I'm using VMware workstation 6.5. I am able to communicate with both machines by selecting 'only option of home. "

  Is there a way by which the physical machine can communicate with the virtual machines.

  At the same time through the VMS, is it possible to access the Internet from the physical amchine.

  Help, please.

  Concerning

  Sriapti

  When you use a bridged vNIC the customer acts as any other host, so that you can access is by his IP (or name if a DNS configuration exists as you acceding to any other host.) What tools you can use depends on the guest operating system and the software available.

  I assume you mean access deskopt. Then you can use RDP (Windows Terminal services) or VNC (tight/tiny).

  For Linux, you can use this last or all the flavors of SSH. In the case of Linux, I use VNC through SSH tunnel. You can also tunnel X through SSH, so if you have an X server on another host (such as the Hummingbird for Windows), you can open your own office remotely there.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• How can I change the physical address associated with my Airport Extreme

  I moved, but when I look for devices by using find my iPhone devices connected to my Airport Extreme base station seem to be at my old location. How to upgrade the physical address associated with the Airport base station?

  To the best of my knowledge, there is no way for the user to do. Finally, the database of Apple will update. There is some anecdotal evidence of that having an iPhone connect to airport speeds the process.

• How can I associate the virtual machine to the physical NETWORK card?

  Hello

  I have a host, has two physical network adapters.

  I want to use one for VM and give an ip address for this but I do not know how to configure it. In my view, "Manage virtual networks" fuction for this...

  Thank you!

  You should already have a phyiscal WHAT NIC assigned to VMnet0 (bridged). So if the choice as vonnection for a guest. Create a second connection open by assigning the physical NIC then to VMnet2, for example (VMnet1 is already in use). Assign this connection to the second guest.

  AWo

• AppleScript to obtain the physical path of a picture in the Yosemite photos app

  In iPhoto, we had this nice XML file with the metadata for each image in iPhoto.

  In the Photos of Yosemite application, there is no file.  So, I wrote an Applescript script that loops on each folder, subfolder, album, etc. and write the details to an XML file.

  When code loops, I have:

  Repeat with img in each media element of myContainer

  and I get these details:

  • file name: 2011-07-10 020. JPG
  • Keywords: 2011-07-10
  • name: missing value
  • Description:
  • favorite: false
  • Date: Monday, July 4, 2011 at 12:34:30
  • ID: 9XCpq6SzSD666TwlCHW8HA
  • height: 3240
  • Width: 4320
  • altitude: missing value
  • Location: valuemissing missing value

  But nothing in these attributes tells me where the actual image file is on the hard drive.  Anybody know a way in AppleScript to obtain the physical path of a picture in Yosemite photos app?

  Thank you!

  There are two categories of images within a library of Photos: 1) copied - no external location information stored (by default) and image is stored in the photo library and 2) referenced - only the pointers to the location of external images are stored in the photo library, and location information to real image from the file menu and context menu as file referenced in the Finder menu item slide show can be found.

  In pictures preferences: general Board, there is an import: box - copy items to the photo library. Apparently, this option is enabled by default, as it was the once Photos migrate my iPhoto library. It also means that I don't have category 2 above and the menu items are gray, because there is no location of external file stored in the photo library.

  More on that here on different application.

• Delete several partitions in the physical model

  Hi all

  I don't know if anyone has the same need for me, if this is maybe because I don't know how to do something which is already being implemented.

  Anyway, my question is:

  How can I remove multiple partitions (400) both from the same table in the physical model?

  I choose the partitions, but the popup does not work, I can press the button Delete in the toolbar, but don't participate in anything.

  I imported my data dictionary, a scheme with several tables that have lots of partitions and I'm not interested to save these partitions.

  When I try to generate the DDL generates all partitions and I don't want the DDL with thousands of scores on the inside.

  the number of tables with partitions is not so high but isn't comfortable to go one by one by selecting the partitions and deleting the object (400 times in one table),

  I can change the table to say that is not partitioned and all partitions will disappear but I so need to again change the table and include the fields for partitions and partition, not useful,

  Another option would be to select when importing, if I want to import only a single partition for each table

  but I do not know is at the end there just because I think only delete partitions with a single operation should be sufficient, at least for me

  Thanks in advance

  Hello

  I connected an improvement on that request.

  An approach that could help is to use the dialog box compare models to control which partitions are imported.  However, this feature is available in version 4.1 (EA1 and ai2).

  If you have something in your model before making your import (for example a fictitious Table), the dialog box compare models will be displayed after the import.

  In tree compare models, if you expand the node of a Table with partitions, it will appear a range Partitions, the node list Partitions or Partitions to hash.  If you uncheck this node, the subordinate entries for all the individual partitions will become selected, and they will not be included when you use the merge button.

  If you have many Partitioned Tables and you want to do this for all Partitions of your range (for example), you can move from tree to table in the dialog box view to compare, and then change the option SET to the range Partition Type (top-right) and then use the button to deselect all (upper-left) to deselect all Partitions of the range.

  David

• Type of object in the physical model

  Hello

  We try to get a complete reference level for the database for deployment, but lack us the 'Types' in the physical model.

  (1) Generate DDL is not creating scripts for "CREATE TYPE" instruction to create the specification of a object type.

  (2) timing of the model with the data dictionary lists recently added external tables

  Thanks in advance

  Zafar

  Hi zak,.

  (1) Generate DDL is not creating scripts for "CREATE TYPE" instruction to create the specification of object type.

  Statements to CREATE or REPLACE TYPE should be generated for structured Types and collection Types in your model.

  Are your structured Types and the Types of Collection selected on the tabs in the Options of the generation of DDL DDL generation phase?

  (2) timing of the model with the data dictionary lists recently added external tables

  Are they newly added in the database or newly added in your model?

  Note that synchronize the model with the data dictionary does not detect the new objects added to the database.  You will need to do a data dictionary import to import additional objects.

  Support of external Tables has been extended in version 4.0.2.840 of the Data Modeler.  They can now be created in the form of Tables in the relational model, and appropriate external table properties can be set in the properties of physical model for the Table.

  If they are created in this way, then synchronize the dictionary of data with the model should identify as newly added in the model.

  David

• Dynamic ResourceBundle without the physical file.

  Hi guys,.

  We have a product that runs in a web environment that should allow customers to translate entries bundle to the runtime and the changes to be picked up without redeployment.  Reach us successfully the goal to translate resources through the use of implementing ListResourceBundle, but the problem is that we cannot offer customers the option to add a new language (new place).  Currently, we need the physical resource bundle java, so that users start to translate the text when running.

  Does anyone know any solution that will allow us to dynamically register new Bundles?

  Thank you

  Florin

  Rather buried in the docs, but the following method

  public static final ResourceBundle getBundle (String baseName)

  The parameter as following documents

  baseName-the base name of the resources, a full qualified class name all

  You then nee a class that solves all calls to the database.  I suspect, however, that you will actually finish by using the version of classloader explicit class because he might try to add the extension to the language the name of class (just guessing), and if this is the case then a custom class loader can be used to return (maybe) a single class with a semantics of construction or a proxy.

  In any case, the final class resolves to a call to the database.

• virtual network card to the physical network mapping and default loadbalancing

  What Virtual Machine virtual network card is map physical NIC.

  For example.

  lets assume Vswitch1 on host1 esx dedicated for the network of the virtual machine (port group) and it has 6 cards network linked to it (vmnic1, vmnic2, vmnic0, vmnic3)

  Load policy (default) Balancing - from the originating virtual port (it balances only outbound traffic through all the nic assigned to vswitch1 right?)

  ESXi host1 <-Vswitch1 (the VM network) <---(vmnic 0-vmnic 3)

  Lets assume that esxi hosting 6 virtual machines and each virtual machine has two network cards configured.  Through some documents, come out of that when the virtual machine is running, it gets connected to the ports of availabe on virtual swicth. say, I turn on the virtual machine in the order VM1, VM2... VM6.

  Vmname virtual adapter port on virtual switch1 Mapping of the physical network adapter                        

  VM1 eth0, eth1 1.2 which mappeed of the physical NIC to eth0, eth1?

  VM2            eth0,eth1                              3,4                                      ?

  VM3            eth0,eth1                              5,6                                      ?

  VM4            eth0,eth1                              7,8                                      ?

  VM5            eth0,eth1                              9,10                                    ?

  VM6            eth0,eth1                              11,12                                  ?

  Since we use load balancing based on the virtual port, can two virtual map of the same virtual machine are mapped to the two physical NETWORK card I want say eth0 VM1 is mapped to the (physical nic) VMNIC0, VM1 eth1 get connected VMNIC1 (physical nic).

  It would be great if you could explain how the virtual network adapters are mapped to the physical NIC Y at - it a command or a script to the list NIC(of all vms hosted on esxi) virtual NETWORK adapter mappings physical in detail.

  .

  sansaran wrote:

  Is there a way to know what virtual NIC to connect to which physical NIC

  With the virtual NETWORK adapter, you hear the virtual card inside the VM? If if and when you use several VMNIC like you, there is no visibility in vCenter (usually vSwitches, we see with Distributed vSwitches).

  However, you can use the command-line ESXTOP tool in the view 'n', for the connection between the virtual machines and the outgoing vmnic.