The inserts in Apple shipping boxes can be removed

Similar Questions

• How to disable the "Insert smart card" dialog box keeps appearing after the connection?

  Running Windows 7 64 bit on a laptop Dell which includes and integrated smart card reader. My configuration does not require a smart card to log on. I was wondering if the smart card reader has worked, I plugged a card chip used on another system. The driver is installed automatically, so it appears the drive works.

  Now, whenever I log in, the "Insert smart card" dialog box is displayed. If I cancel or close the box, he continues to reappear every few seconds. How to disable this behavior?

  Update: this is somehow connected to Outlook 2003. I have 4 different e-mail accounts. The "Insert smart card" box appears only when checking for my att account (yahoo), which is configured by using POP3.

  Go to the Services.msc and check the settings for the smartcard (manual test) service.

  Tom

  PS 29 December 2011

  The position of the OP, have been reported since a lot of this problem on the some notebooks Dell and HP. There are a few reports that a replacement of the motherboard fixed the problem and the other that the relocation of a certain connector (no mention of exaclly one that) solves the problem. Direct contact with the manufacturer of the laptop computer, Dell or HP wether, might be useful. Try a follow-up if you have already made contact.

  Tom

• double job with firefox (i.e.2) icons are on the i - mac toolbar. How can I remove one of these icons?

  Duplicate (i.e.2) icons have appeared on my toolbar of the i - Mac in Firefox. How can I remove one of these icons, please? Delete Firefox!
  Have you tried the method Apple 'recommended', i.e. parts dragging one of these icons and cares for her... then the copy of the icon should disappear. But it does not... .the duplicate icon then a few 'jumps' back on my toolbar at the bottom of the screen.

  Have also tried the key 'command' and then by dragging the icon desired and holding to it... but the same thing happens... compare to disappear, the icon "just jump" back to my toolbar.
  Would be grateful for any help and advice on the above. Thank you in anticipation of your help.

  The only time I see two icons for a Mozilla application in the dock is when I have to restart after installing an extension or a new theme. The additional icon disappears if I restart again. I have an extension that gives me a reset button to use. There is an add-on for Firefox that can give you a reset button, if you care to try this remedy.
  https://addons.Mozilla.org/en-us/Firefox/addon/re-start/

• My iPad air was posted the message "silent ringtone. How can I remove this?

  I've been driven crazy for several weeks on a daily basis.  "Silent ringtone" message has been appearing intermittently on my iPad air, what happens? I can't remove this item. Does anyone have any suggestions?

  Silent ringtone to the tune of the iPad?

  It's a new

  Nevertheless start by trying to force restart it

  Restart your iPhone, iPad or iPod touch - Apple Support

• I accidentally used an old key sync on my 3rd computer and need to change to match the other 2 computers. How can I remove the incorrect sync key and replace?

  I trying me to computer sync a 3rd and when I looked at what I thought was the key to current synchronization and he came, I realized that the key I used was old and now does not match the other 2 computers. How can I delete the wrong computer key 3rd to enter the correct key?

  Hello, on your computer 3 go in Firefox > options > synchronization and click on 'unlink this device' then you can configure it again with the correct credentials.

• folder files next to the mailbox... How can I remove a unused please

  OK, on the left of your screen to the mailbox are folders:-mail spam, deleted, drafts etc... over the years, I added some, and now wish to remove them, but can't find any way to do this... Please can someone help?

  I don't have a lot of files, but some are empty and so they can be removed...

  Thanks a lot Freddo6849

  Sorry, Firefox send an e-mail, it's a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  http://www.mozillamessaging.com/en-us/support/
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• I have a flip icon Toast I can't remove the program is deleted, but I can't remove the icon

  I have a mt desktop icon that I can't remove. The program is removed, but I can't get the icon go away.

  Hi Darlene,

   
   
   
  1. What is the operating system installed on your computer?
  2. what happens when you try to remove the icon from the desktop?
  3. have you already properly uninstall flip icon Toast?
   
  It shows that the Toast Software Flip is not uninstalled properly; Follow the steps mentioned below and check if that helps.
   
  Try to remove the icon in safe mode and check if I thelps.
   

  Start your computer in safe mode on Windows 7

   
  Start your computer in safe mode in Windows Vista
   
  To start the computer in safe mode in Windows XP
   
  If the problem persists, contact the vendor of the software and check if that helps.

• Mark on the lens... How can I remove it?

  Hi guys,.

  I recently made a short film. I've been passing along fine in the edition: it took me a while, but that's another story... One day I turned totally portable and without a monitor/laptop (my crew was for the most part ill) a darn fly crashes into the lens, leaving a very dirty mark everywhere in my pictures: http://www.flickr.com/photos/61700422@N08/6196948845/in/photostream/lightbox/ I have AE CS5 and am very clever, but this one stumped me. How can I remove it? Of course I tried the route of clone stamp tool (motion tracking, etc.), but there's just too many things to do that I must rub on all images (and I have about 7000 to do)

  If someone could help, I would be very grateful...

  Thank you

  Video_Editor_123

  Revision FX' RE: remplir fill--> extract of the luminance of the video, hide it gradually a bit the model use which results in as an entry for the area fill effect, set its mode to mix edges, play with the settings, the result on the top of your source element using a blend like the color mode or overlay layer. Don't bring back the detzails, but at least still fading...

  Mylenium

• A box with "protector of system parameters" appears with the 0x0eedfade error code. How can I remove it?

  In addition, I also get messages, MSN has encountered a problem and needs to close. This refers to the code 0xc0000005 re MSN.exe.  Whatever instructions I need to correct these errors, please take I don't know anything and give me instructions step by step, please.

  Nextcase,
  Thanks for posting with us.  You have Spybot Search and destroy installed?  If so, uninstall it and reboot your system, then test.  If you do not have installed Spybot then I suggest that you perform a clean boot.  Here is the information on performing a clean boot.  Try this out and let us know what happens.

  Perform a clean boot

  Follow the steps in this article to resolve problems with a clean boot.

  http://support.Microsoft.com/kb/310353

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Everytime I open PC I get a box that says C:\windows\system32\lgfxes.dll must be redownloaded. I don't know where to download from. How do I get the site to download or how can I remove it?

  I use windows Vista.

  Hello

  1. are you aware of any hardware or software changes, prior to the beginning of the question?

  2. I suggest you to follow the links and check.

  Method 1:

  Step 1:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2:

  Put your system in a clean boot state: helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135  
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  See also the link mentioned below, if Service pack 2 is not installed, try to install and check:

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Hope the helps of information provided.

• HP pro book: 4530 Hp light up not with the inserted battery it lights up when I remove the battery

  Hello

  This morning I tried to switch on my hp probook 4530 s and there is no start, then I pluggged in adapter and still it does not illuminate the LED flashes for some time for 8 seconds and stop, when I turn it on again it does the same thing repeatedly. I removed the battery several times and connects ac, but nothing happened. And now all of a sudden turn on with power supply and no battery plugged in it. Can help me please John this question.

  Clint1

  Hello

  Welcome to the HP Support forum.

  This really looks like a hardware problem. Finally, he could end up by for a service. However, for diagnostics it is very important the number of times the LED flashes / issues.

  Please, check these items official 2 HP on these issues, that you experience now. Follow the appropriate steps that correspond to your case to try to resolve the problem:

  > > http://support.hp.com/us-en/document/c01732674

  > > http://support.hp.com/us-en/document/c03515402

  If you've tried everything but nothing works, I fear that you will need to bring your computer (or ship it) service - repair center authorized HP. If the computer is still under warranty, you must first notify HP support. If you don't know where such a Center, please contact HP support for help to find a. Here's more information:

  > > http://support.hp.com/us-en/document/c00372730

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  I would like to know how this happens. Feel free to post again.

• Computer REMANE exists with both names in the list of networks. How can I remove the bogus computer

  A computer will not be seen by each other on the network.  Continue to ask for a password even if no password has been set and the other 3 computers had no problem seeing.  So I created a new user account, w. administrator privileges and amazed the former and also renamed the computer.  Now everyone can see each other.  However, the original name still appears as a separate computer.  Click on it and of course, you get a message "Detection impossible.  How can I get rid of this fake job icon in my list of computers on the network?

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1:
  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  Also I suggest you to return the form mentioned as follows the link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-delete-or-clear-redundant-network/07834191-708d-45F9-9ef2-e779dd930ce3

  Hope this information is useful.

• I think I have the malware installed Pegasus. How can I remove it?

  I received a message of photography through which turned out to be a link to the questionable site. Now, my phone has been badly behave. I ran out of batty in less than a day (which never happens!), he has tried to download something and didn't and then he asked my restriction code.

  I'm sure it is hacked... Is the only thing I can do is to clean and reload from a backup?

  Hi Scifibooknut,

  9.3.5 iOS is available and supposedly solves the problem. But I guess that you already updated to the latest version...

• I tried all the suggestions you and RoboForm gave, can not remove the old version of RoboForm, nor install again.

  I have Firefox 20.0.1 and using RoboForm 7.8.7.5, who had also stopped working and so I upgraded RoboForm to 7.8.8.5 and it will not load even on Firefox, and I'm not able to delete the 7.8.7.5 either. I decided that I can't use Firefox until you solve the problem. I will not use password manager you have in the browser because I don't think that it is safe.

  Also, I would recommend my friends who use RoboForm to also avoid Firefox at the moment.

  You and RoboForm claim that there is a delete button in Firefox, there is no button with Roboform. I even turned off 7.8.7.5 but it will only allow me to activate, I can't delete this version.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  The report please come back shortly.

• When I go looking for a new tab opens to the MyStart by Incredibar. How can I remove this when MyStart was deleted?

  After using the method to delete MyStart and the toolbar and the folder has been deleted, I always get the MyStart search page when I open a new tab. I had submitted my search engine to Google, but when a new tab is opened, it opens to the MyStart search page.

  It works! Thanks Mozilla, I know that I can always count on you guys!