the iPod line out 5 or 6.

Similar Questions

• Qosmio X 770 - 11 c - how to disable on board the speakers when you use Line Out?

  Hello

  Is it possible to disable on board to intervene when the output line is used.

  Currently, if I plug in a cable to the socket of hadphone and choose alignment on the realtek Control Panel, sound is output line out as expected, but also through the internal speakers.

  Is it possible to stop this and don't have sound out through the output line?

  Thank you

  Graeme

  If you want to hear his helmet only you should choose option helmet.
  Disconnect the cable and reconnect it. When you see the small window on the screen where you can choose between the headphones and output line options choose headphones and you'll hear on external display only.

  In case you have disabled this pop-up dialog box you can activate it manually. Open the Realtek Manager connect the external device and when you see active point black on the right side make double click here and change the settings.

• I have an iPod hooked up to a Pioneer AVH-X4700BS 160, and nine times out of ten the iPod reads OK TO DISCONNECT.

  I have an iPod hooked up to a Pioneer AVH-X4700BS 160, and nine times out of ten the iPod reads OK TO DISCONNECT.

  It seems normal. What happen?

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade and fade out and the yel

  I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?

  Rickey

  Thanks for the follow-up report.

  Just a lit bulb. Maybe the answer, maybe a spleen.

  Look carefully at the audio track of the timeline in the vicinity of title of the file.

  

  The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where

  the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with

  Volume: level as shown in the screenshot.

  Hope it's the factor involved.

  RTA

• How to fill out the "to:" line with a variable email address?

  I'm new to coding and am not sure how to ask my question. I have a link in an 'Email' symbol that I would like to have the window open to a 'mailto', but there are several instances of that symbol on the timeline, each using a different email address. If the [symbol]. Email.Click code reads as follows:

  Window.Open ('mailto:'+ sym.getVariable = ("emailWindow"), "_self")

  and the line in the Stage.creationComplete code that is supposed to call the variable code reads:

  sym.getSymbol("Details_David").$("Email").html ("[email protected]" "").setVariable("emailWindow","[email protected]");

  With this code, the browser opens a window of mailto, but the ' to: ' line readings, "indefinite".

  Either in the [symbol]. Email code. Click, I have:

  Window.Open('mailto:"emailWindow"',"_self")

  without the "emailWindow" as the variable name, the "to:" line to the mailto line reads, "emailWindow".

  How to fill out the "to:" line with a variable email address?

  Otherwise, it works better:

  1)

  replace

  sym.getSymbol("Details_David").$("Email").html ("[email protected]").setVariable("emailWindow", "mailto:[email protected]");

  with

  sym.getSymbol("Details_David").$("Email").html ("[email protected]");

• How to better master with this model s/n, sides IN and OUT in the same line.

  Hi all!
  I'm just facing some old historical table where, to the transaction recorded in the same line, something like:
  
  column name
  ==============
  ref_no,
  x_id,
  product_id,
  product_amt,
  -* IN part
  in_flag-(IN)
  in_customer,
  in_address,
  -* PORTION
  out_flag-(OUT)
  out_customer,
  out_address
  
  Nice shipping biz where we can have the two sides met in the same line, they have same value for IN and OUT_flag = actual values 'IN' and 'OUT', woou!
  I really expect to have this table in different model where a line is an entry, probably with PK = ref_no + in_out_flag.
  But it looks like I can do anything on this design, and now I choose upong xactions request entry and EXIT, IN/OUT fixing portions on a common part with the UNION. This, the only way I can see how to solve this problem, or I'm not right? And I need to pack all in the stored procedure.
  
  Appreciate your comments how to do this, I'm really new to Oracle, however have some exp.
  And comments about these models db as well! -).
  
  
  Best
  TR

  I don't understand what problem needs to be solved.

  What criteria an independent observer would conclude that a correct solution has been posted.

  Published by: sb92075 on September 11, 2010 17:19

• Links out to the new line?

  I am currently working on a new site based on CSS on a test server.
  
  I came up against a problem that makes no sense. Links included in the text to other pages or the destinations which have a CSS hover effect sometimes appear on a single line (correct), but at other times the line of text break on the following line when either before I hover over the link or after. This then breaks the flow of the page instead of the background color showing just behind the link. because of the lines of fracture to the other line shows effect hover on the full range?
  
  It is not systematically; It comes and goes; I don't see where it comes from; two lines that contain links will appear exactly the same in construction, but react differently with the mouse?
  
  Any help with this problem would be greatly appreciated. 2 links behave differently on the same page?

  > [b} #column a: link, a: visited {I thought would cover the rules]
  > for
  > the right column.

  Not quite.

  This is known as grouping the descendant selectors in a list separated by commas.

  However, each item in the list (between commas) is treated independently.

  "#column a: link, a: visited" is the same as #column a: link {;} rules more
  a: visited {rules ;}

  After the comma, he must again specify the id selector "#column" then
  Display: block applies only to one: went inside the '#column '.

  In other words, "#column a: link, a: visited" should be "#column a: link,
  "#column a: visited.

  As it is written currently, all States visited the tag is set to
  Display: block, which causes the break on lines after having clicked on everything
  link in the body of the text.

  --
  Concerning

  John Waller

• Line out Dock to USB Mac connection

  I have a dock station to connect my iPhone 4s, what happens if I connect a cable (used to charge an iPod shuffle) to a USB port in my Macbook Pro and across (male 3.5 mm connector) cable at the entrance to the dock line?

  taking female mini-jack 3.5 mm of dock is out is not the entrance

• Composers not appearing in the Menu on the iPod

  Well, I have several 1000 songs on my iPod.  When I connect my iPod to my computer and click on the device, I see all my songs and artists.  When I unplug and browse the device I can't see some of them.  I then did a search on the iPod for the "ten" for "Dixie Chicks" and it found 4 albums. Even with the terrible lines and others also.  Anyone know why this is happening?

  When you say "composers", do mean it actually composer and not artist?  These are two separate data fields of the songs in iTunes. Most of the songs should have populated artist field, but many cannot have an entry for compost.

  If it's something that worked before and not now for some reason, the cause can be corrupt data on the iPod.  If all of your songs in your iTunes library, you can do a Restore on iPod using iTunes.  This erases iPod, reinstall its software and sets it to the default settings.  The restore button is on the settings of the iPod summary screen in iTunes.  Then sync your music library to the iPod as before.

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• How can I lock the "to:" lines in the window of writing?

  Since the last version of Tbird, when you enter a ' to:' address, as soon as I hit tab or enter, the ' to:' line scrolls to the top and looks that I did not choose an address. But I really, it's just that I do not see the address because it scrolls upwards out of sight.

  With the help of Win8 64-bit Win7 on Sony VAIO mode.

  Thanks heaps for all your help!

  I followed your suggestion to safe mode (which solved my problem) then go back and using the process of elimination to weed out the offending module.

  The Add on the cause of the problem was "Stationery 0.8.4" by Arivald (photo below). I don't remember installing or never using it, but whatever...

  I'm glad to be back to normal again. Extremely grateful to you and the Group of volunteers that run Mozilla. I liked your products!

• Cannot restore the iPod

  I read the discussion for corrupt iPod Classic and tried all of the listed suggestions.

  The iPod is not recognized by iTunes (latest version for my MacBook) and does not appear in the Finder.

  When you run the diagnostic tests, he said the "cannot open device" and underneath that says "ERROR!" «Stop diag»

  It does not appear in the disk utility so I can't try to repair the disk.

  I tried restoring the DFU on the MacBook.  When I did this and open iTunes, it appear a message about restoring the iPod and has continued to prepare for the iPod but nothing ever happened.  I left that he connected for at least 20 minutes.

  I also tried to plug it into our Windows laptop and it was acknowledged in the Manager of devices like Apple's USB device, but not in iTunes.

  Any other suggestions?

  See iPod displays an icon 'X' Red - Apple Support. Apple may not have much interest in the classic iPod service. The line was removed some time ago. I would normally say that you look at corrupt iPod Classic, but if the error message indicates that the drive will not mount so you will not be able to read the stats.

  See this recent post by Kenichi Watanabe - Re: iTunes save my iPod Classic 160 Gb -which gives a link to a possible replacement of DIY drive.

  TT2

• Cut a file .mov without loss of quality on the iPod touch

  Hello

  I have a new iPod touch 64 GB with many clips of film (long).

  Soon, I'll run out of space!

  How can I adjust the .mov files (which are too long) on the iPod

  without quality loss?

  Do I need a special app for this?

  Thank you.

  You should be able to do it directly from the camera without a third-party application. See http://www.betterhostreview.com/cut-videos-camera-roll-iphone.html for an example. Personally, I would backup the originals to a computer first.

  TT2

• T - Bird does not check the subject line of an email. (v24.4.0).

  Hello
  When you compose an email that I chose to have Thunderbird 24.4.0. Search for the words misspelled with underlined time and spell check before you send him.
  During testing, I noticed that he points out and checked out everything except the line 'object '.
  Thunderbird will highlight misspelled words in the "Subject" line but not seeking a correct word before sending them as it does with the body of the email.
  You are aware of this and there's a difficulty on the way?

  Thank you very much
  -v-

  It is true that when you select Options/check spelling, the object is ignored, but if "The spelling as you type" is activated, subject misspelled words are underlined, and right click on the text proposed corrections. So, it works in a limited sense. This bug may be relevant.