the legends transparencies and extra line spacing

Similar Questions

• I see just the apple symbol and a line underneath.

  After having to erase all content and settings on my iphone5 I am not able to use it now I can just see the apple symbol and a line underneath.

  I'm afraid this means that something was wrong during the process... Probably due to a corruption somewhere.

  You can try to reset the phone to first - hold both home and power buttons until the phone will reboot and shows the Apple logo. ONLY release THEN the buttons.

  Then give him 10 minutes to do its thing.

  If she does not recover after that then you'll need to put the phone into restore mode and restore from scratch - iOS software essentially do a factory reset.

  To do this connect the phone to a computer running iTunes, can do the same thing reset the process described above with the following change: once white screen immediately release the power button but keep now in the home button until the iTunes logo appears. Once that happens, iTunes will ask you a restore. Just follow the process and instructions to restore the phone.

  ~ Menageryl

• AVI Clips imported into CS.5.5 has the color green and colored lines

  NOTE:

  I use the video monitor for the CS5.5 program.

  Always trying to between CS5.5 and test the trial version. The new challenge is the color green and colorful lines on the imported. AVI files.

  Of course, some advice would be appreciated. Thank you.

  nVidia card?  Go to the nVidia Control Panel and set the parameters of quality 3D of 'let the application decide '.  If you have an ATI card should there be similar parameters.

  -Jeff

• Satellite P100-286 - vertical on the screen restart and constant lines

  I got this P100-286 with Nvidia Geforce Go 7900 GS and recently the laptop started to freeze options even with vertical lines on the screen tried recovery cd tried to re - install and after installation, that he started to do the same. I have read similar problems in the forum and this is a common problem with Toshiba? I have spend £1500 on this and it is only 3 years old. My friends have older laptops of this almost 6 years old and in good working condition.
  Y at - it a suggestion for this problem or a solution? The heat on the basis of the laptop is really hot and it's like that for centuries.

  Any help is really appreciated after spending so much like to last longer or it is a problem of reliability with the Toshiba brand.

  Hi vns.

  Hmm strange. I have ever read on these issues here in the forum with Satellite P100. Friend of me has the same model and it s still does work correctly, no problems at all.

  Do you have the same vertical lines on a screen? If so, it is certainly associated with the internal graphics card and not watch.
  By the way: you have the same problem in the BIOS or just Windows?

  With regard to the heat on the underside: I think that it s time to clean it and remove dust. You can do this using the jet of compressed air to blow the dust from the cooling fans. That's why it of not necessary to disassemble your laptop.

• Enter the text in the TextBox multiline and new lines

  Hi guys,.
  
  I have a form that accepts an input of users and records in an access database.
  
  The data are in turn attracted a recordset and displayed on an ASP using VBS.
  
  The form takes the info has 1 multiline textbox and I want it to be a simple input box except when the user adds a line break by pressing back I want to be taken into account when the recording is attracted on the detais page...
  
  Earlier no matter how many times I hit return key when you type in the multi line text box and add paragraphs or simple sentances that all come out no line breaks in page when shown?
  
  What I have to do my own text rich editor? or is there something Im missing?
  Thanks in advance for any thoughts.
  Tag

  Tag2007, try using the Replace function:

  Replace (your_string, Chr (13) ")
  ")

  David Powers wrote:
  > Tag2007 wrote:
  > Thanks Im on the site now and don't see the version lite? Do you have
  > link to it please...
  >
  > InterAKT was acquired by Adobe in September and most of its products
  > have been abandoned. The full version of KTML is now part of the
  > Kollection suite.
  >
  > The solution to your problem is very simple, however. I'm sorry I can't
  > gives you the exact coding, because I did not use ASP for many years.
  > However, all you need to do is create a function that looks for a
  > strings for the new line of characters and replaces them with
  (or
  
  (> for XHTML).
  >
  > PHP has built-in (nl2br()) to do so, but in ASP, you will need to
  > Search new character code.
  >

• Update with the Lead feature and several lines

  I have a table such as:

  Table1:

  OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName

  123 11/5/2015-12/31/2099 File5.txt

  123, 7/11/2015-12/31/2099 File7.txt

  or it can look like:

  Table2

  OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName

  123 11/5/2015-11/7/2015 File5.txt

  123, 7/11/2015-11/9/2015 File7.txt

  123 11/9/2015-12/31/2099 File9.txt

  123 11/15/2015-12/31/2099 File15.txt

  I want to take the 2nd to the last EndDate and update with the previous value.

  So in fact, it would look like this.

  Table1:

  OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName

  123 11/5/2015-11/7/2015 File5.txt

  123, 7/11/2015-12/31/2099 File7.txt

  or

  Table2

  OrderNumber EFFECTIVE_DATE EndDate FileName

  123 11/5/2015-11/7/2015 File5.txt

  123, 7/11/2015-11/9/2015 File7.txt

  123-11/9/11/15 to 2015/2015 File9.txt

  123 11/15/2015-12/31/2099 File15.txt

  I got it work in a select statement to a single value. now I just need help it enter an UPDATE statement and update all records.

  SELECT W.EFFECTIVE_DATE, W.EFFECTIVE_END_DATE,

  NVL (LEAD (W.EFFECTIVE_DATE, 1) (ORDER implementation W.EFFECTIVE_DATE), December 31, 99 ') AS 'EFFECTIVE_DATE_NEW '.

  OF WH_ORDERS_REPORT W

  WHERE ORDERNUMBER = '10460992';

  It did not work:

  UPDATE WH_ORDERS_REPORT WH

  SET EFFECTIVE_END_DATE = (SELECT NVL (LEAD (WH2. EFFECTIVE_DATE, 1) (ORDER of WH2. (EFFECTIVE_DATE), DECEMBER 31, 99 ')

  OF WH_ORDERS_REPORT WH2

  WHERE WH. ORDERNUMBER = WH2. ORDERNUMBER)

  I appreciate your help in the creation of an update statement to do this.

  Rap, but it's working now.  I'll confirm with a few other records before I mark as correct, but what I see so far, it is beautiful, thank you!

  merge into WH_LIFELINE_ORDERS_REPORT D

  a_l'_aide_de)

  Select

  DISTINCT ORDERNUMBER,

  CURRENTSTATUSDATETIME,

  NVL (LEAD(EFFECTIVE_DATE, 1) ON (ORDERNUMBER partition

  (EFFECTIVE_DATE order), December 31, 99 ') as EFFECTIVE_END_DATE

  of WH_LIFELINE_ORDERS_REPORT

  ) S

  WE (D.ORDERNUMBER = S.ORDERNUMBER

  AND D.CURRENTSTATUSDATETIME = S.CURRENTSTATUSDATETIME

  )

  When matched then

  setting a day of set D.EFFECTIVE_END_DATE = S.EFFECTIVE_END_DATE;

• The Oracle answers and duplicate lines

  Hello
  
  
  I have a SQL view called "DUP" which shows all lines that are the same
  for the 4 main fields INCNUM, TAKE, SAMP, CORR.
  Now there are a few lines that are duplicates, whereas these 4 key column, BUT
  There are also lines that are duplicates of 100%.
  
  The Oracle answers seems to hide lines that are 100% (all columns, not only 4) duplicates. (there no SEPARATE in SQL).
  How can I avoid this behavior?
  
  Also how to create whole new second report showing 100% duplicates lines i.e.
  who are the same for each unique column?
  
  Thank you
  metalray

  You just have to do the reverse then. Uncheck the separate support feature in the RPD and you will separate in your SQL

  Thank you
  Prash

• the display vertical and horizontal lines

  Help, I went simply to connect and it's my screen. You want to know if it is a known problem and if they should solve this problem, I bought it in January 2013. How is that going to cost I only had a one year apple care.  What is the problem with that?

  same problem as mine, I think that his problem with caused by a discreet graphics card overheating

  What model your MBP is? MBP repair extension for 2011 model is now underway, which ends February 2016

  Apple will replace your free logicboard if your model is matches the list of the products concerned.

  If this is not... just prepared about $200 for reballing the chipset vga (price in my country) or more for replacing logicboard.

• Line spacing InDesign error!

  I use CS4: the last line of a paragraph has a different spacing than the rest of the paragraph. The font size is 10 points and the main is 10 points, but there is more space between the second to the last line and the last line. Looks like this (not as exaggerated)...

  "... shall be deemed to be followed by the words"without limitation"or" but not limited to, "and, when required by the context, the singular includes the plural.

  be used to interpret the provisions.

  Anyone know why or suggestions for a fix?

  Very appreciated

  and vice versa, the feminine gender includes the masculine and vice versa. Section headers and paragraph used in it are for reference only and are not

  In InDesign, leading (aka line spacing) is a character attribute. This means that you can have different stroke applied to text in a paragraph. At least, the most likely cause of the problem is a character in the last line with automatic line spacing or another applied value. The suspect probably is returned at the end of the paragraph. Turn on Type > show hidden characters and select the number of the fly character and change line spacing.

• Spacing problems with the variable in the text captions and smartshapes

  Hello

  I am using Captivate 7.0.1.237 on Windows 7.

  I created a questionnaire that is customized with the last screen showing a message of congratulations and the total score. The total score is variable. The legend appears on the "Edit" mode. But when I publish it as a SWF, spacing stops to the variable.

  Here's what it looks like in edit mode:

  

  Here's how it looks in the browser (F12 and published modes):

  

  I inserted the variable using the accordion Format. What I tried:

  • The simultaneous use of smartshapes and text captions
  • Different browsers (FireFox 24, IE 11, Google Chrome 32)
  • Typed content in Notepad and copy it to the legend smartshape and text.
  • Typed content directly in the legend smartshape and text.

  I get the same result in each scenario.

  Please notify.

  Anthony

  Try to remove the Red extra formatting.

• How to show the two original and change the line

  I have a table looks to and it store the two original and change lines, how can I get the Original lines both edit? In this case, I want to display the first two lines (all columns are composite keys)

  In the meantime, I use more Partition BY with line number, but I get a line

  flag	APPNO	EXAM TYPE	EXAM YEAR	EXAM MONTH	Object
  Origin	1234567890	HL	2015	01

  Art and Design

  Edit

  HL

  2015

  01

  Art and Design

  origin

  SL

  2015

  01

  Math

  New

  SD

  2015

  01

  English

  Please check this one, I think it can meet your needs.

  SQL> with meta_data (flag,APPNO,EXAM_TYPE ,EXAM_YEAR ,EXAM_MONTH,SUBJECT)
    2          as (select 'Origin',1234567890,'HL',2015,01,'Art and Design' from dual union all
    3                  select 'Edit',1234567890,'HL',2015,01,'Art and Design' from dual union all
    4                  select 'origin',1234567890,'HL',2015,01,'Math' from dual union all
    5                  select 'New',1234567890,'HL',2015,01,'English' from dual )
    6  select *
    7    from meta_data
    8  where exists ( select 1
    9                             from meta_data outer
  10                           where flag ='Edit'
  11                              and meta_data.APPNO          =outer.APPNO
  12                              and meta_data.EXAM_TYPE          =outer.EXAM_TYPE
  13                              and meta_data.EXAM_YEAR          =outer.EXAM_YEAR
  14                              and meta_data.EXAM_MONTH          =outer.EXAM_MONTH
  15                              and meta_data.SUBJECT          =outer.SUBJECT)
  16  /
  
  FLAG        APPNO EX  EXAM_YEAR EXAM_MONTH SUBJECT
  ------ ---------- -- ---------- ---------- --------------
  Edit   1234567890 HL       2015          1 Art and Design
  Origin 1234567890 HL       2015          1 Art and Design
  
  SQL>
  

• How to implement the legend in Oracle 11g B2B

  Hello
  I am referring to the http://docs.oracle.com/cd/E23943_01/user.1111/e10229/callouts.htm#CHDEFBDG document and try to implement caption for a specific need.
  Initially, I would like to implement the legend using the simple XML - XML transformation. To do this, I made a few adjustments in oracle B2B, but unfortunately it does not work. Here is the detailed procedure.
  
  (1) I copied a java example Code of an XML-to-XML Transformation example in section 13-2 of the document mentioned above for JDeveloper, code compiled and created the jar (TestCallout.jar).
  (2) I copied the .jar file to a specific path (ex: D:\Oracle\Middleware\user_projects\MyCallout) and mentioned the same way in B2B UI / Configuration tab / Callout Direcotry.
  (3) create a new file .xsl using Jdeveloper where I am mapping from one XML schema format to another format of XML schema.
  (4) I have created a new legend in the Legend tab and here are the details:
  Implementation class: com.mycallout.XMLTransform
  Name of the library: TestCallout.jar
  Now please suggest me where I can quote the path of the .xsl file that I created, Oracle B2B legend UI?
  Should what the name of the parameter and value I mention in the settings section?
  
  Here's my XSL file:
  
  < xsl: stylesheet version = "1.0".
  xmlns:XP20 = "http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20".
  xmlns:bpws = "http://schemas.xmlsoap.org/ws/2003/03/business-process/".
  xmlns:AIA = "http://www.oracle.com/XSL/Transform/java/oracle.apps.aia.core.xpath.AIAFunctions".
  xmlns:MHDR = "http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction".
  xmlns:BPEL = "http://docs.oasis-open.org/wsbpel/2.0/process/executable".
  xmlns:oraext = "http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc".
  xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
  xmlns:ns0 = "http://www.example.org".
  xmlns:DVM = "http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue".
  xmlns:HWF = "http://xmlns.oracle.com/bpel/workflow/xpath".
  xmlns: xsl = "http://www.w3.org/1999/XSL/Transform".
  xmlns: med = "http://schemas.oracle.com/mediator/xpath."
  xmlns:IDs = "http://xmlns.oracle.com/bpel/services/IdentityService/xpath".
  xmlns:BPM = "http://xmlns.oracle.com/bpmn20/extensions".
  xmlns:XDK = "http://schemas.oracle.com/bpel/extension/xpath/function/xdk".
  xmlns:xref = "http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions".
  xmlns:ns1 = "http://www.example.org".
  container = "http://www.w3.org/2001/XMLSchema".
  xmlns:ORA = "http://schemas.oracle.com/xpath/extension".
  xmlns:Socket = "http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator".
  xmlns:LDAP = "http://schemas.oracle.com/xpath/extension/ldap".
  exclude-result-prefixes = "xsi xsl ns0 ns1 xsd xp20 APO aia mhdr bpel oraext dvm hwf med bpm xdk Xref ora socket ldap ID" >
  < xsl: template match = "/" >
  < ns0:Input >
  < ns0:OrderType >
  < xsl: value - of select = "concat(/ns1:OredrStatusInquiryRequest/ns1:BranchPlant,/ns1:OredrStatusInquiryRequest/ns1:OrderType)" / >
  < / ns0:OrderType >
  < ns0:OrderNumber >
  < xsl: value-of select = "/ ns1:OredrStatusInquiryRequest / ns1:OrderNumber" / >
  < / ns0:OrderNumber >
  < ns0:Item >
  < xsl: value - of select = "concat(/ns1:OredrStatusInquiryRequest/ns1:LineNumber,/ns1:OredrStatusInquiryRequest/ns1:Item)" / >
  < / ns0:Item >
  < / ns0:Input >
  < / xsl: template >
  < / xsl: stylesheet >
  
  
  Please help me to go further.

  Now please suggest me where I can quote the path of the .xsl file that I created, Oracle B2B legend UI?

  In step 4, you must add the parameter of legend with the name "xsltFile" which must be of type string, and the value of this parameter must be the absolute path of the XSL file (including the file name). Suppose that you have copied the xsl in the C:\xsl directory and the XSL file name is abc.xsl then the value of the parameter "xsltFile" is therefore C:\xsl\abc.xsl

  Kind regards
  Anuj

• Bug with the aggregate function and no group

  When I run the following query:

  with the_table as
  (
    select 1 as id, 100 as cost from dual
    union all select 2 as id, 200 as cost from dual
    union all select 3 as id, 300 as cost from dual
    union all select 4 as id, 400 as cost from dual
    union all select 5 as id, 500 as cost from dual
  )
  select id, cost
  from
  (
    select id, cost
    from the_table
    --
    union all
    --
    select 0 as id, sum(cost) as cost
    from the_table
    where 0 = 1
    -- group by 1
  )
  order by id;

  I get this result:

  ID    COST
  --  ------
   0  <null>     
   1     100
   2     200
   3     300
   4     400
   5     500

  However, when I "uncomment" the line "Group 1", the query works as expected (without the id = rank 0).
  
  This occurs even when "the_table" is an array.
  
  Someone else comes through this (and if so, how long is a problem)?
  
  The database is 11.2.0.2.0 64-bit.
  
  EDIT: It also happens without a Union - the following returns a single line (with null 0 and cost of id) without the Group By and no line with her:

  select id, cost
  from
  (
    select 0 as id, sum(cost) as cost
    from 
    (
      select 1 as id, 100 as cost from dual
      union all select 2 as id, 200 as cost from dual
      union all select 3 as id, 300 as cost from dual
      union all select 4 as id, 400 as cost from dual
      union all select 5 as id, 500 as cost from dual
    )
    where 0 = 1
    -- group by 1
  )
  order by id

  Edited by: Donbot February 15, 2012 10:29

  Donbot wrote:
  Someone else comes through this (and if so, how long is a problem)?

  The database is 11.2.0.2.0 64-bit.

  This is a documented behavior.

  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/functions003.htm#SQLRF20035

  "
  All except COUNT (*) GROUPING and GROUPING_ID aggregate functions ignore NULL values. You can use the NVL function in the argument of an aggregation function to substitute a value for a null value. COUNTY and REGR_COUNT never return null, but return a number or zero. For all remaining functions of aggregation, * if the DataSet contains no line, * or if it contains only the rows with NULL values as arguments to the aggregate function, * then the function returns null.*
  "

• Color of the text changes and dynamics...

  In some website not expensive creation of software, I you can transform text in rich text and change the color of the individual words within the same text box full of text. Is - there anyway do this in flash CS3?

  Thanks clbeech I actually found an easy way to do it. For your dynamic text box, you can click on the 'html' box in the Properties window for the text box. (Its a small square box with this <> inside her and it's just right out of the box single and multi-line dropdown.) You can then select the text you want to change inside the text box and change its police/size/color, but also that it becomes a dynamic link and it will do so without affecting the rest of the text in your text box.

• Adding column which gives the serial number for each line in the Bulletin Board

  I use the update version 2 Jdev 11 g.
  I'm the filling of all employees from the emp table ADF table.
  My requirement is to add a column more as the first column and header line which displays the serial number for each serial number of row.the is not available in the table emp in database .i want to generate it dynamically when the data are filled in to ADF table.i don't want not to use the method to get the SQL query rownum. I want to get custom code (in the Managed Bean) or set all of the properties in the subject entity or any other object.
  
  Published by: sj0609 on September 8, 2009 09:43

  Hello

  Give an id to the table (say 'currRow') varStatus property. Add a column to the table (for example with a text output), then set it to the value of the output text #{currRow.index}.

  Arun-