The Oracle answers and duplicate lines

Similar Questions

• I see just the apple symbol and a line underneath.

  After having to erase all content and settings on my iphone5 I am not able to use it now I can just see the apple symbol and a line underneath.

  I'm afraid this means that something was wrong during the process... Probably due to a corruption somewhere.

  You can try to reset the phone to first - hold both home and power buttons until the phone will reboot and shows the Apple logo. ONLY release THEN the buttons.

  Then give him 10 minutes to do its thing.

  If she does not recover after that then you'll need to put the phone into restore mode and restore from scratch - iOS software essentially do a factory reset.

  To do this connect the phone to a computer running iTunes, can do the same thing reset the process described above with the following change: once white screen immediately release the power button but keep now in the home button until the iTunes logo appears. Once that happens, iTunes will ask you a restore. Just follow the process and instructions to restore the phone.

  ~ Menageryl

• How to store images in the oracle database and get back on a jsff page in ADF?

  Mr President.

  How to store images in the oracle database and get back on a jsff page in ADF?

  I have students and employees in my database and want to store their pictures against their ID.

  How to do this?

  Concerning

  Tender,

  You can check the links that explain this below.

  https://tompeez.WordPress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-2/

  Johny tips: ADF: display image files from database as a popup in Application Web ADF

  See you soon

  AJ

• AVI Clips imported into CS.5.5 has the color green and colored lines

  NOTE:

  I use the video monitor for the CS5.5 program.

  Always trying to between CS5.5 and test the trial version. The new challenge is the color green and colorful lines on the imported. AVI files.

  Of course, some advice would be appreciated. Thank you.

  nVidia card?  Go to the nVidia Control Panel and set the parameters of quality 3D of 'let the application decide '.  If you have an ATI card should there be similar parameters.

  -Jeff

• Satellite P100-286 - vertical on the screen restart and constant lines

  I got this P100-286 with Nvidia Geforce Go 7900 GS and recently the laptop started to freeze options even with vertical lines on the screen tried recovery cd tried to re - install and after installation, that he started to do the same. I have read similar problems in the forum and this is a common problem with Toshiba? I have spend £1500 on this and it is only 3 years old. My friends have older laptops of this almost 6 years old and in good working condition.
  Y at - it a suggestion for this problem or a solution? The heat on the basis of the laptop is really hot and it's like that for centuries.

  Any help is really appreciated after spending so much like to last longer or it is a problem of reliability with the Toshiba brand.

  Hi vns.

  Hmm strange. I have ever read on these issues here in the forum with Satellite P100. Friend of me has the same model and it s still does work correctly, no problems at all.

  Do you have the same vertical lines on a screen? If so, it is certainly associated with the internal graphics card and not watch.
  By the way: you have the same problem in the BIOS or just Windows?

  With regard to the heat on the underside: I think that it s time to clean it and remove dust. You can do this using the jet of compressed air to blow the dust from the cooling fans. That's why it of not necessary to disassemble your laptop.

• The Oracle text and locking

  Hi Experts,

  I'm on Oracle 11.2.0.3 on Linux. I've implemented the Oracle text in my database. My production dba told me today that there is some locking problems in production and he sent me a report from ASH. I can post that ASH in a separate email thread, but first of all in this post you ask who are there known issues with Oracle expected text that it causes associated locks or lock? I read somewhere that oracle indexes text get defragmented over time. My full text index is defined as sync on commit. For example, should they be rebuilt over time - say drop and recreate them? What should be the frequency of doing this?

  I'll be very grateful for any pointer on it.

  Kind regards

  OraserN

  There are different ways to optimize, some fast and partial and some more slow and painstaking.  Please see the procedure optimize_index of the ctx_ddl package:

  CTX_DDL package

  The type of optimization and frequency can be set in the index settings, as you do with sync (on commit), or on demand using dbms_job and dbms_scheduler.

• Enter the text in the TextBox multiline and new lines

  Hi guys,.
  
  I have a form that accepts an input of users and records in an access database.
  
  The data are in turn attracted a recordset and displayed on an ASP using VBS.
  
  The form takes the info has 1 multiline textbox and I want it to be a simple input box except when the user adds a line break by pressing back I want to be taken into account when the recording is attracted on the detais page...
  
  Earlier no matter how many times I hit return key when you type in the multi line text box and add paragraphs or simple sentances that all come out no line breaks in page when shown?
  
  What I have to do my own text rich editor? or is there something Im missing?
  Thanks in advance for any thoughts.
  Tag

  Tag2007, try using the Replace function:

  Replace (your_string, Chr (13) ")
  ")

  David Powers wrote:
  > Tag2007 wrote:
  > Thanks Im on the site now and don't see the version lite? Do you have
  > link to it please...
  >
  > InterAKT was acquired by Adobe in September and most of its products
  > have been abandoned. The full version of KTML is now part of the
  > Kollection suite.
  >
  > The solution to your problem is very simple, however. I'm sorry I can't
  > gives you the exact coding, because I did not use ASP for many years.
  > However, all you need to do is create a function that looks for a
  > strings for the new line of characters and replaces them with
  (or
  
  (> for XHTML).
  >
  > PHP has built-in (nl2br()) to do so, but in ASP, you will need to
  > Search new character code.
  >

• the legends transparencies and extra line spacing

  When I use transparent captions, the published version sometimes shows some additional space between the first and second lines. The remaining lines are spaced, but the first has too much space, which seems strange. How that disappears?
  
  Lae

  I just had this same problem. You, by chance, to do a copy & paste in the text of the legend? That's what I did with exactly the result that you are experiencing. For purposes of marketing or flow, I couldn't change my font, so for me it wasn't the issue. I did, however, retyping all the legend and that solved my problem. Maybe it will work for you as well.

  Good luck
  B

• The Oracle cards and the SDO_INTERSECTION problem

  Hi all
  
  I have a SQL query that uses SDO_INTERSECTION and I would use it to create a dynamic theme using the API Oracle cards.
  
  I tried several other applications and they all work very well, displaying the information correctly. My query using SDO_INTERSECTION runs and returns the correct results in SQL Developer, but when I use it to create a dynamic theme in the Oracle cards I get the following error:
  
  * "Request string is too long for no AJAX of Oracle remote access cards."
  
  I read on another thread that you can call MVMapView.XMLHttpRequest (true) for this problem, but if I do, no times are displayed on the map, not even with other requests, so I guess that's not the solution.
  
  My SQL query is:
  

  SELECT * FROM (
  select sum(emissao_fact.quantidade_emitida), 
  sum(emissao_fact.limiar_poluente), 
  ROW_NUMBER() OVER (ORDER BY SUM(quantidade_emitida) DESC) AS rownumber, 
  concelho.concelho_id as idin, 
  concelho.nome, 
  bacia.nome as bacia, 
  SDO_GEOM.SDO_INTERSECTION((SELECT geom FROM concelho concelhox WHERE concelhox.concelho_id = concelho.concelho_id), SDO_DIM_ARRAY(SDO_DIM_ELEMENT('X', -180, 180,.00000005), SDO_DIM_ELEMENT('Y', -90, 90, .00000005)), (SELECT geom FROM bacia baciax WHERE baciax.bacia_id = bacia.bacia_id ), SDO_DIM_ARRAY(SDO_DIM_ELEMENT('X', -180, 180, .00000005), SDO_DIM_ELEMENT('Y', -90, 90, .00000005))) glocal
  from instalacao, emissao_fact, concelho, bacia
  where emissao_fact.instalacao_id = instalacao.instalacao_id AND instalacao.BACIA_ID = bacia.bacia_id AND instalacao.concelho_id = concelho.concelho_id
  AND instalacao.concelho_id = concelho.concelho_id
  group by concelho.concelho_id, concelho.nome, bacia.nome, bacia.bacia_id
  ) WHERE rownumber <= 5

  As I said, it performs well on SQL Developer, is probably not relevant here.
  
  Any ideas? Thanks in advance,
  ~ Ruben

  The problem is "application of string is too long for no AJAX of Oracle remote access cards. It is caused by 1) the mapviewer server is in a different field than where your application is running, and 2) queries sent to the server remote mapviewer are too long. You query has nothing to do with it. You can read the documentation of the API for MVMapView.enableXMLHTTP to learn more about this issue.

  To resolve this problem, you must call MVMapView.enableXMLHTTP (true) to force the client to send AJAX requests via proxy MapViewer servlet. The proxy servlet MapViewer belongs to mapviewer, and it must run in the same domain when your application is running. To activate it, you must only deploy a dummy MapViewer on the same app server where your application is deployed. The proxy servlet will work once mapviewer.ear is deployed. No configuration is required.

  If using proxy MapViewer servlet, this is not an option, you must configure reverse proxy with Apache web server, that is to say where the application runs. Reverse proxies accept the requests sent to mapviewer servlet URL that is local to the application and to transfer requests to the server, in mapviewer to remove. You need to set up one for http://remote-domain/mapviewer/foi and one for http://remote-domain/mapviewer/mcserver. They serve a virtual mapviewer instance running in the application domain. In your application, you must set the mapviewer for the application domain, http:///mapviewer base URL. In the browser, applications are now sent in the same domain, so it is more cross domain issue.

• Update with the Lead feature and several lines

  I have a table such as:

  Table1:

  OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName

  123 11/5/2015-12/31/2099 File5.txt

  123, 7/11/2015-12/31/2099 File7.txt

  or it can look like:

  Table2

  OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName

  123 11/5/2015-11/7/2015 File5.txt

  123, 7/11/2015-11/9/2015 File7.txt

  123 11/9/2015-12/31/2099 File9.txt

  123 11/15/2015-12/31/2099 File15.txt

  I want to take the 2nd to the last EndDate and update with the previous value.

  So in fact, it would look like this.

  Table1:

  OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName

  123 11/5/2015-11/7/2015 File5.txt

  123, 7/11/2015-12/31/2099 File7.txt

  or

  Table2

  OrderNumber EFFECTIVE_DATE EndDate FileName

  123 11/5/2015-11/7/2015 File5.txt

  123, 7/11/2015-11/9/2015 File7.txt

  123-11/9/11/15 to 2015/2015 File9.txt

  123 11/15/2015-12/31/2099 File15.txt

  I got it work in a select statement to a single value. now I just need help it enter an UPDATE statement and update all records.

  SELECT W.EFFECTIVE_DATE, W.EFFECTIVE_END_DATE,

  NVL (LEAD (W.EFFECTIVE_DATE, 1) (ORDER implementation W.EFFECTIVE_DATE), December 31, 99 ') AS 'EFFECTIVE_DATE_NEW '.

  OF WH_ORDERS_REPORT W

  WHERE ORDERNUMBER = '10460992';

  It did not work:

  UPDATE WH_ORDERS_REPORT WH

  SET EFFECTIVE_END_DATE = (SELECT NVL (LEAD (WH2. EFFECTIVE_DATE, 1) (ORDER of WH2. (EFFECTIVE_DATE), DECEMBER 31, 99 ')

  OF WH_ORDERS_REPORT WH2

  WHERE WH. ORDERNUMBER = WH2. ORDERNUMBER)

  I appreciate your help in the creation of an update statement to do this.

  Rap, but it's working now.  I'll confirm with a few other records before I mark as correct, but what I see so far, it is beautiful, thank you!

  merge into WH_LIFELINE_ORDERS_REPORT D

  a_l'_aide_de)

  Select

  DISTINCT ORDERNUMBER,

  CURRENTSTATUSDATETIME,

  NVL (LEAD(EFFECTIVE_DATE, 1) ON (ORDERNUMBER partition

  (EFFECTIVE_DATE order), December 31, 99 ') as EFFECTIVE_END_DATE

  of WH_LIFELINE_ORDERS_REPORT

  ) S

  WE (D.ORDERNUMBER = S.ORDERNUMBER

  AND D.CURRENTSTATUSDATETIME = S.CURRENTSTATUSDATETIME

  )

  When matched then

  setting a day of set D.EFFECTIVE_END_DATE = S.EFFECTIVE_END_DATE;

• Loading the values of XML tag parent in the Oracle table and the values of the child

  <project>
   <id>001</id>
   <name>Math Project</name>
  .
  .
   <team>
   <id>1</id>
   <name> Team Roger </name>
  .
  .
   </team>

   </project>
   <project>
   <id>002</id>
   <name>Science Project</name>
  .
  .
   <team>
   <id>2</id>
   <name> Team Alpha </name>  .
   </team>
   <team>
   <id>3</id>
   <name>Team Romeo </id>

   </project>

  It's the structure of the XML where the content is changed daily and the file is placed in "D:\Test_Dir". I'm trying to load a table (teams) with the details of the team and its corresponding parent, like this project:

  proj_id team_id team_name
  001 1   Team Roger
  002 2   Team Alpha
  002 3   Team Romeo
  Below is the pl/sql block I wrote:
  
  declare
  cursor proj_cur is select project_id from projects;
  proj_rec proj_cur%rowtype;
  begin
  for proj_rec in proj_cur 
  loop
  INSERT INTO teams(team_id,team_name,project_id)
  WITH t AS (SELECT xmltype(bfilename('TEST_DIR','SCRUM.xml'), nls_charset_id('UTF8')) xmlcol FROM dual)
  SELECT  
  extractValue(value(x),'*/id')team_id
  ,extractValue(value(x),'*/name') team_name 
  ,extractValue(value(y),'/project/id') project_id
  FROM t,TABLE(XMLSequence(extract(t.xmlcol,'/scrumwise-export/data/account/projects/project'))) y
  ,TABLE(XMLSequence(extract(t.xmlcol,'/scrumwise-export/data/account/projects/project/people/teams/team'))) x 
  where (extractValue(value(y),'/project/id'))='emp_rec.project_id';
  end loop;
  end;
  
  
  This returns a cartesian product! Any help with this is much appreciated.
  

  A few additional tips BTW:

  -do not use wildcards (*) when you really know the structure of the XML document and the name of the node you want to extract.

  -use the UTF8 character set is not recommended because it supports any valid XML characters. Use rather AL32UTF8 .

  So, similar to Kim:

  select proj.project_id
       , team.team_id
       , team.team_name
  from xmltable(
         '/scrumwise-export/data/account/projects/project'
         passing xmltype(bfilename('XML_DIR','SCRUM.xml'), nls_charset_id('AL32UTF8'))
         columns
           project_id  varchar2(3) path 'id'
         , teams       xmltype     path 'people/teams/team'
        ) proj
      , xmltable(
          '/team'
          passing proj.teams
          columns
            team_id     number         path 'id'
          , team_name   varchar2(100)  path 'name'
        ) team
  where exists (
    select null
    from projects p
    where p.id = proj.project_id
  ) ;
  

  Or a shorter version using a single XMLTABLE:

  select team.project_id
       , team.team_id
       , team.team_name
  from xmltable(
         'for $i in /scrumwise-export/data/account/projects/project
            , $j in $i/people/teams/team
          return element r {
            element project_id {$i/id}
          , $j/id
          , $j/name
          }'
         passing xmltype(bfilename('XML_DIR','SCRUM.xml'), nls_charset_id('AL32UTF8'))
         columns
           project_id  varchar2(3)    path 'project_id'
         , team_id     number         path 'id'
         , team_name   varchar2(100)  path 'name'
       ) team
  where exists (
    select null
    from projects p
    where p.id = team.project_id
  ) ;
  

  And if a project can have no team, you can the outer join the XMLTABLE 2nd instead:

      , xmltable(
          '/team'
          passing proj.teams
          columns
            team_id     number         path 'id'
          , team_name   varchar2(100)  path 'name'
        ) (+) team
  

• Please help with the oracle text and select for each word in the sentence

  Hello
  
  I have a problem with a query which NEEDS to be done in SQL (not pl/sql in the stored procedure):
  
  Suppose that a phrase such as "Church of snowboarding."
  
  Can I divide this by using:
  Select regexp_substr ('church snowboard', ' [^] +', 1, level) word
  of the double
  connect regexp_substr ('church snowboard', ' [^] +', 1, level) is not NULL)
  
  now I have words 'showboard' and 'Church '.
  
  So far so good.
  
  Now I need for each of these words, to create a list of unique IDS collected using text oracle contains the query as follows: (pseudocode)
  for SPLIT.word in "snowboarding", "Church".
  SELECT SCORE (1) NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE CONTAINS (name, SPLIT.word, 1) > 0
  UNION
  SELECT SCORE (1) NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE CONTAINS (name, ' SYN('||)) SPLIT.word: ', GR_THESAURUS)', 1) > 0
  UNION
  SELECT 100 AS NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE NAME LIKE '% "| SPLIT.word | '%'
  
  so of course I have to untangle this UNION to remove duplicates
  
  Anyone here sees a way out of my situation? A way to make the loop in a select (use with and such) then
  Just add a select distinct NO_MATRC, NO_NOM_ from)
  
  I tried, but I'm out of ideas so I thought that some guru here might have the answer ;)
  
  Thanks in advance for any advice
  
  See you soon

  You might end up with something like the XML below, ideally as binding in the query.

  SELECT SCORE (1) NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE CONTAINS (name, e
  Church of snowboard
  
  transform ((JETONS, "{", "}", "AND"))
  transform ((JETONS, "{", "}", "OR"))
  turn ((JETONS, «SYN (",", GR_THESAURUS) ', 'AND'))
  turn ((JETONS, «SYN (",", GR_THESAURUS) ', 'GOLD'))
  transform ((JETONS, «?)) {","} "," AND"))/seq >
  transform ((JETONS, «?)) {","} "," GOLD"))/seq >
  
  
  
  (1) > 0

• The Oracle reports and thermal printer (printer)

  Hello

  I am a very serious problem... I'm designing a software for a retail store... it is a Point of sale software... Now, I try to print the report with a thermal printer (SAM4S GIANT-100), but it does not print... it gives just a tiny piece of paper about 1 cm long with a line in it and that is... I have tried everything but no luck.

  Please help me guys as soon as POSSIBLE the opening is in four days.

  Thanks for your time.

  It uses the CPCL/ZPL programming language. I'm afraid that u cannot design the report

  using GUI.

  Monday, January 26, 2015 08:52:56 community-admin

• the display vertical and horizontal lines

  Help, I went simply to connect and it's my screen. You want to know if it is a known problem and if they should solve this problem, I bought it in January 2013. How is that going to cost I only had a one year apple care.  What is the problem with that?

  same problem as mine, I think that his problem with caused by a discreet graphics card overheating

  What model your MBP is? MBP repair extension for 2011 model is now underway, which ends February 2016

  Apple will replace your free logicboard if your model is matches the list of the products concerned.

  If this is not... just prepared about $200 for reballing the chipset vga (price in my country) or more for replacing logicboard.

• format change of date by default in the oracle database and applications at all times.

  Hello

  my current date format is DD-MON-RR and I would change to MM/DD/RRRR permanently. (not at the session in the database level).

  And please suggest me how to change in application level. - is changing the profile ICX option: Date (at the site level) format mask is sufficient?

  Please suggest.

  Thank you

  Ramanantsoa

  PL see the section called "Release Date in shape" in MOS 393861.1 Doc - also see MOS Doc 1520540.1