The lighter font changes after entering

Similar Questions

• Automatic setting of the M58 BIOS change after a few days.

  In fact, the problem is related to the boot sequence.

  I put the system BIOS AHCI disable and the HARD drive on the boot option will be excluded and I have to manually change the IDE HDD to the included side so that the system to boot from the HARD drive.

  But after a few days, the system will ask me boot error 1962 durong.

  When I go to the sequence, the IDE HDD going to sit on those excluded from BIOS to start starting site.

  Try to Flash the BIOS to version 5ckt48aus to 5ckt50aus (Latest), already, but still hit with the problem.

  Help, please.

  You can refer to the URL below for more visibility.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=SF08-D0203

  Hi Peter,.

  The problem I encounter is due to AHCI HARD drive setting and only after WOL.

  If you do not use AHCI 3, 4 & 5 will be AHCI / IDE HDD SATA not.

  You can change the BIOS setting followed steps below:
  1. power on the system and press 'F1' enter the BIOS utility.
  2. go to the "Device" option, make sure that "Enable the SATA AHCI" change to "disable"(if you don't use AHCI, pls ignore this step).
  3. go to the "Start" option, select "Boot Sequence"
  and ensure that the IDE HDD: is not in the section 'Excluded from the boot order' to [Primary] start sequence screen.
  4. press "2" to enter "start sequence screen [automatic],
  and ensure that the IDE HDD: is not in the section 'Excluded from the boot order' to [Auto] sequence start screen.
  5. press "3" to enter "start screen for sequence [error],
  and make sure that the IDE HDD: is not in the section 'Excluded from the boot order' on-screen of start sequence [error].
  6. press "F10" to save and exit the setting.

  Make sure that the HARD drive is not in the list of the excluded for all 3 optios. Primary, automatice & error.

  Let me know if this helps or not.

• Help! All icons on the desktop has changed after downloading a program! __

  I downloaded a program and just suddenly all my desktop icons changed to the program's icon.  I can't change after reboot, or try to change each one individually through the Properties tab.  Don't know how to get back them.  Any ideas?  Thank you

  Hello

  Restore the. File associations LNK using the 1st link here and others as needed.

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Font change after you have selected text does not work when you have multiple lines

  For readability, I'm usually out of order in the new font Courier. So I select the text I want to change the font and choose a font "Courier New". This works well when there are only a few lines. But when there are a lot of lines, it won't work. I have to do it 3 or 4 times so he can work.

  For some reason, the command below are output has been changed to "Courier New" only once. So I couldn't reproduce the problem now.

  Someone complained a similair problem?

  I use Firefox on Windows 7

  Example:

  SQL > create tablespace TEST_TS3 datafile '+ DATA_DG' size 25G

  autoextend on

  MaxSize 32767 m

  Local extended management

  single 4 m size

  Auto segment space management;  2 3 4 5 6

  Created tablespace.

  SQL > select BLOCK_SIZE, INITIAL_EXTENT/1024/1024, 1024/1024/NEXT_EXTENT from dba_tablespaces where nom_tablespace = 'TEST_TS3 ';

  BLOCK_SIZE, INITIAL_EXTENT/1024/1024/1024/1024 NEXT_EXTENT

  ---------- ------------------------ ---------------------

  8192                        4                     4

  -Just found out that the default INCREMENT size is 100 MB (at least in 11.2.0.4)

  SQL > select FILE_NAME, BYTES/power (1024,3) BytesInGB, increment_by INCREMENT_BY_BLOCKS, (increment_by * 8192) /power (1024,2) IncrementByInMB

  2 of dba_data_files where nom_tablespace = 'TEST_TS3 ';

  FILE_NAME BYTESINGB INCREMENT_BY_BLOCKS INCREMENTBYINMB

  -------------------------------------------------- ---------- ------------------- ---------------

  25 12800 100 +DATA_DG/hrcpdas/datafile/test_ts3.413.887991171

  SQL > ALTER TABLESPACE TEST_TS3

  ADD DATAFILE '+ DATA_DG '.

  SIZE 2g

  AUTOEXTEND ON NEXT 256K

  MAXSIZE 30G;  2 3 4 5 6

  Tablespace altered.

  SQL > select FILE_NAME, BYTES/power (1024,3) BytesInGB, increment_by INCREMENT_BY_BLOCKS, (increment_by * 8192) /power (1024,2) IncrementByInMB

  2 of dba_data_files where nom_tablespace = 'TEST_TS3 ';

  FILE_NAME BYTESINGB INCREMENT_BY_BLOCKS INCREMENTBYINMB

  -------------------------------------------------- ---------- ------------------- ---------------

  25 12800 100 +DATA_DG/hrcpdas/datafile/test_ts3.413.887991171

  +DATA_DG/hrcpdas/datafile/test_ts3.414.887992467 32 2.25-> 256 KB

  Unfortunately, publishers OTN suffer many peculiarities of the editor of the forum. The problem you describe is known, and there are many others. For a more complete list, including tips, see the list of problems the Publisher and the bugs forum.

  The thread has in the meantime been archived and cannot be updated more. Many problems have been fixed and some returned as newer versions of browser can have introduced other issues. Using the list is not really make sense unless there is cooperation with the administrators of site or the forum software developer (s). The last to date, Jive Software, seems to be deaf-blind, and resilient to the feedback from users.

  To validate the command line or SQL, you can highlight the text with the mouse and apply "Syntax" forms the > toolbar editor. This automatically applies a fixed font Courier 10.

  It is explained in the previous, more or less obsolete Oracle Community Forum Guide - part 3/3, 4.2 ECMA

• According to the browser font changes

  Site built must with Verdana defined as fonts throughout the site, but the police changes depending on the browser used.  Help!

  Verdana is a 'web safe '. The notion of a 'web safe' font is a bit inappropriate. A web safe font is actually a list of fonts.

  

  The ToolTip that appears when you hover over "Verdana" in the list of Safe Web fonts shows the policies 'rescue' or the 'font stack' associated with this web security police.

  The idea with secure web fonts must choose will use the fonts that visitors to your site can be found on the majority of computers, devices and versions of operating systems. However, without a font is on 100% of all computers and devices. When "Verdana" is not on the particular visitor's computer, or the device of the browser will be 'rescue' to Tahoma. If Tahoma is not available, it will be help in Geneva. If this is not available, it will ask the browser to select a sans serif font.

  Even if Verdana is available on the visitor's computer or device, it cannot be the same version of Verdana you use (and therefore can have measures of subtly different fonts and line breaks so different). Even if it is the same font, the layout breaks and the line of text may still vary to a browser due to the subtle differences in text layout engines in each browser. Where the font is not available at all and the browser must relief appearance to a different font, and the layout of the text will be significantly different.

  For the display of more coherent policies (although always with some variation of browser and OS operating system browser) and live text in the browser, use Web fonts. Click on the option 'Add Web fonts' in the menu fonts and add Web fonts to your menu. These fonts are automatically downloaded from Typekit to the computer or device used by a visitor to the site, so the same font is always used. (However, made and differences of line break will be produced again due to differences between the browsers and operating systems.)

  Another, although usually less desirable option is to use system fonts. When a system font is used Muse converts the text block to an image. This leads to slower page load times, but where a specific font should absolutely be used, it may be the only alternative. Muse automatically generates 'alt text' for the image so that the original text is always there for the search engines to index and screen readers to read, but the user will be unable to select or search the text on the page in the browser.

  The idea with web fonts secure is to choose fonts that are on the majority of computers, devices and versions of operating system of your site visitors should be used, but not a font is 100% of all devices. When "Verdana" is not on the particular visitor's computer, or the device of the browser will be 'rescue' to Tahoma. If Tahoma is not available, it will be help in Geneva. If this is not available, it will ask the browser to select a sans serif font.

  Even if Verdana is available on the visitor's computer or device, it cannot be the same version of the font you use (and therefore can have subtly different font metrics). Even if it's the same police, the layout of the text and line break can vary from a browser to a browser due to the subtle differences in text layout engines in each browser. Where the font is not available at all and the browser must relief appearance to a different font, and the layout of the text will be significantly different.

• How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

  March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

  Hello

  If you think the update caused the blue screen then uninstall it to check.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ==============================================================

  If not, remove the updates help then we can troubleshoot the BlueScreens.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Installed Enigmail. Some "writing". The toolbar (fonts, change color, margins etc is missing? How to get the toolbar?

  Before installing Enigmail, there was the bar containing the fonts (increase or decrease) change of color, margins (left, Center, right) tool etc..
  In the menu by selecting "special characters", etc. was present. Now, nothing! No way to select menus toolbar with these elements.
  A real disappointment! Any help to restore the toolbar of composition would be greatly appreciated.

  Mitchell

  Christ1,

  Yet once, thank you for your follow up to my question.

  I followed your instructions; solve the problems I was experiencing.
  Thank you for taking the time to explain how to re - engage the formatting of composition.

  I hope that the other gentleman encounter the same problem also reads this information provided by you, as well.

  Kind regards

  Mitchell

• Resolution of the image has changed after the calibration of the image

  Hi all

  I put my webcam resolution up to 1280 x 720, but after the Calibration of the Image, the video changed to 1364 x 730.

  This affects at the coordinate of filtering? It is very important in my application.

  BTW, Pattern Matching 4, there is an exit of matches (real world), how to give him information to translate from pixel in mm? Currently I use corresponding pixel and use a few calculations to translate correspondence in mm. And where is the origin of the actual coordinates? It is also in the upper left corner as pixel coordinates?

  Hello

  You can try using the "IMAQ convert Pixel to Real World VI" to transform the coordinates of the pixel to the real world coordinates.

  Best regards.

  Daniel.

• I couldn't activate the quick user change after I disabled it. Where can I find vrlogon.dll to remove?

  I have a professional operating system from XP.  I had to disable the quick change of user for a program to work. Now, I want to activate the fast user switching, but all options on the screen appear in gray.  An error message told me to delete vrlogon.dll.  Where the vrlogon.dll? See attached message.  "A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the following program. "The following file name can help you identify the program that made the change: vrlogon.dll.

  Look to see if you have installed a fingerprint reader from IBM which has a protected connection and causes the error vrlogon.dll.
  Look at the following links:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-58845

  http://help.Lockergnome.com/Windows/screen-fast-user-switching--ftopict521451.html

  This is the 3rd party website and Microsoft cannot guarantee that problems resulting from the use of this information can be resolved. Changes / using this information is at your own risk.

  Thank you!

• Published the picture of changes not updated

  I have LR CC 2015.5.1 and have just begun with her.  I created an account (zenfolio) online and have a set of services to publish upward with a VERY popular plugin.  Downloading the pictures very well, but if I do changes in LR I'm being of course that I should see them change in the online service, once I re - publish, correct?  Is not the case.  No change is reflected, although LR shows they are changed and after the re - publish, they return in the area "published photos.  Any idea what I might be missing?  I searched a bit here and found similar problems, but not the same thing.

  Republication must replace the existing image on Zenfolio, I see three possibilities for your problem:

  (1) the type of file uploaded to Zenfolio is set to "Original".

  ~ Only your original unedited file is downloaded, even if there are changes that he

  (2) there is no editing to develop to the photo but "Marked to republish" has been triggered due to a metadata change IE new keyword. (See the section "Metadata that trigger republish" configuration of the plugin to see that everything is set to what you want)

  ~ Image on Zenfolio will not change, but the metadata will be updated.

  (3) if the images were renamed on Zenfolio after publication that may break the link of file between LR and Zenfolio. "So, in the next release, it will download a new copy of the image to replace the ' missing/not linked" to your gallery (according to the sort order of Zenfolio Gallery they are in last in the gallery)

  Create a new gallery of test with just a few pictures and after downloading to provide an exposure (or any other change of very recognizable development) single and republish. See if the problem still occurs with this new gallery?

  (Note: use the new test photos that aren't already on Zenfolio.)

  Change the sort order of the Zenfolio Gallery "Commander free download" then it is easy to find photos republished.

  Click on the Info button for the Zenfolio photo and see if the updated of changes after it was re-released.

  -BH

• Need to reduce the font size after that make it is too big and now save the changes is not displayed. ALT-space bar/entry does not work.

  You have already answered this in forum Windows 7 here, http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/f464c81d-26a2-49be-aa58-9ab335e64f0c

  but when I press Enter, it returns the window moved to its ' original location - so the problem still exists.

  Also... When you press Alt - Space Bar, the control box is impossible to read the large font size does not fit in the size of the box.  I pressed Alt - M in any case, that gave me the cross and allowed me to move the window, but like I said "enter" returns just the prior position window.  Need more help. Thank you.

  Hello

  Method 1.
  After pressing Alt + space + M you must hold the left key of the mouse and then place the window in place. Check if this is useful.

  Method 2.
  Try changing the size of police as a result of the article below and check if that helps.
  Make the text on the screen larger or smaller
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-text-on-your-screen-larger-or-smaller

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Changes after the Incopy fonts spacing content update

  I'm having a problem trying to understand what is happening with my spacing of the font for a text box that has been allocated and updated by one of our editors.

  I don't know what version of incopy there is probably don't not CC. I use Indesign CC Build 11.2.0.99.

  The amendment to its update should not change anything, except a paragraph near the end of the text box, but for some reason, all the text is changing. The text is formatted in the way that I want to first capture screen, then after update of much tighter sound and flows differently. Monitoring, kerning and all text attributes seem to be exactly the same. So miss me something somewhere, or there may be a compatibility issue if it has an older version. I'm not sure. Any ideas?

  

  The second paragraph breaks completely false after update. Nothing is changed in this paragraph by the Publisher.

  

  It is essential to know which version is used, and to ensure that all policies are the same.

• problem with fonts (eith text layers) after entering the serial number

  

  

  PS CS6 x 64 Extendet

  After entering the serial number moved layers of text in the files which were made in the the trial version

  Welcome to the forum!

  I never heard talk about fonts moving once someone enters a serial number, but here are a few things to try:

  1. If you use a font management program, make sure that the fonts you need are still installed and assets.

  2. If you do not use a font management program, make sure that the fonts you need are in the proper location for your operating system.

  3 read the tips at http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html and see if any apply to your situation.

  I'm sorry I don't have more specific suggestions. Maybe someone else on this forum can help?

• Changing from PC to Mac. I finally managed to download CS6 Design Standard. After entering the serial number it says that it is not valid even if I've copied correctly from the disk.

  Where should I go now?

  Serial numbers are specific to operating systems as are the versions of the software... your Windows of CS6 version will not work on a Mac and your windows serial number will not work on a Mac.  Since it is CS6 you have the possibility to change platforms.  See the following for instructions:

  Product order | Platform, language Exchange

• LAPTOP HP 15: BUTTON (F12) WIRELESS LED LIGHTS AMBER COLOR AFTER STOP OF THE LAPTOP

  THE BUTTON (F12) WIRELESS LIGHT AMBER COLOR AFTER STOP OF THE LAPTOP. THE AMBER LIGHT LIKE THAT AFTER PRESSING THE POWER BUTTON ON THE LAPTOP. MEWANS TI LAPTOP DON'T SE NOT GOOD SHUT DOWN ON GIVING THE STOP COMMAND. ASK FOR HELP ON THIS ISSUE TO YOU.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K