"the machine virtual source is not recognized" using VMWare Converter stand-alone 4.01

Similar Questions

• Using the stored procedure: Source does not have a target executable

  I'm a guy from MS - SQL, so I'm fairly familiar with T - SQL syntax, but feels a heck of a time trying to take the code I wrote for SQL and turn this works with Oracle.
  
  in any case, I'm using Oracle SQL Developer, and I have a stored procedure that calls the Alter Table statement and adds a column. Just trying to get this one to work before moving on to the other that I have. I get the message that source does not have a target executable when I try to run this command.
  
  create or replace PROCEDURE rta_conv_addcolumn (rtatablename1 in varchar (20),)
  rtatablename2 in varchar (20),
  rtacolumnname in varchar (256),
  rtacolumninfo in varchar (256))
  AS
  DECLARE rtasql VARCHAR (4000);
  BEGIN
  IF EXISTS (SELECT * from user_tables WHERE table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename2)
  Then rtasql: = ' ALTER TABLE ["+ rtatablename2 +"] ADD "+ rtacolumnname +" "+ rtacolumninfo;
  Run (rtasql);
  END rta_conv_addcolumn;
  
  If I try to compile I get the following messages, which make no sense, since the syntax I use to declare the input variables seems to be good.
  
  Error (1.54): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (2.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (3.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (4.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (6.1): PLS-00103: encountered the symbol "DECLARE" when expecting one of the following: begin function package pragma procedure < an ID > subtype type use < a between double quote delimited identifiers of > form current cursor external language the symbol 'start' is substituted for 'SAID' continue.
  Error (15.5): PLS-00103: encountered the symbol "RTA_CONV_ADDCOLUMN" when expects it one of the following values: If

  Adds the column to the table specified in rtatablename1, if there is neither rtatablename1 nor rtatablename2.

  NOT TESTED

  create or replace PROCEDURE rta_conv_addcolumn(rtatablename1 in varchar,
  rtatablename2 in varchar,
  rtacolumnname in varchar,
  rtacolumninfo in varchar)
  AS
  rtasql VARCHAR(4000);
  count1 number;
  count2 number;
  count3 number;
  BEGIN
    SELECT count(*) into count1 FROM user_tables WHERE table_name = rtatablename1;
    SELECT count(*) into count2 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename1;
    SELECT count(*) into count3 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename2;
    IF count1>0 AND count2 = 0 AND count3=0 Then
      rtasql:= 'ALTER TABLE '|| rtatablename1 ||'ADD ' || rtacolumnname || ' ' || rtacolumninfo;
      Execute immediate rtasql;
    END IF;
  END rta_conv_addcolumn;
  /
  

  Max

  Published by: Massimo Ruocchio, December 12, 2009 02:15
  Missing AND

• Receive error message when converting 5.1 VSphere virtual machine using VMWare Converter

  I am moving some Virtual Machines out of my server for VSphere, using VMWare Converter. When I select the source of success and the machine then I get a "failed to get hardware information for the selected computer". I tried two different machines. One is a Windows 7 and the other is a Windows Server 2003. The end of the game is to move them to a server with only VMWare Workstation.

  The research I've seen some users corrected it by changing the OS of the VM, but that did not help me. I have attached the diagnostic logs. Any help is appreciated.

  You must use the latest version of Converter 5.0.1 - 5.0 does not work

• Expanded the bad virtual disk but not Guest OS - Shrink?

  Not quite another question generic "shrink the VMDK.

  I accidentally spread the bad virtual disk in vCenter 725 GB to 1 TB. Fortunately, I realized that until I expanded the partition to use the new space in Windows. Is it possible to reclaim that space? In the virtual machine settings, I have the options of arrow to "reduce" the size down, but I'm not sure on the impact at the prompt to do. Certainly if the guest has not been extended to consume this space then it should be recoverable?

  as you're talking about: the option arrow in the virtual machine settings

  This does not leave you reduce (Shrink) the size of the virtual disk, which has already been strengthened. This option is useful in the case when we say you went into settings of the virtual machine, the disk size increased from 10 to 20 GB, but not yet committed that change and you want to return to 15 you can then use this arrow to do.

  Please visit following KB, is the answer to your question, use VMware converter.

  VMware KB: Increasingly, the thinning and shrinking of the virtual disks for VMware ESX and ESXi

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

  The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS

  

• Hello, I recently bought a new iMac and I am wanting to install Lightroom for her, but I'm having some trouble with the key to series is not recognized. There is no disk drive on the new Mac, so I can't just pop the disc in. Is there anyway I

  Hello, I recently bought a new iMac and I am wanting to install Lightroom for her, but I'm having some trouble with the key to series is not recognized. There is no disk drive on the new iMac, so I can't blow my disc. Is there a way I can download it simply by using the key to series on my package? I tried the section "Redeem Code", but said air key is not valid. Thank you

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  VM will be restarting inbetween fixing and explains the operating system not found.

  Please help me on this

  Thank you

  Anand

  What Linux distro are you trying to install?

• Windows activation error - 0 x 00000279. the sepecified product key could not be used

  activation of the window, instantly need product key to activate my str. window 7 pc but, why I get the error of activation code 0 x 00000279. the sepecified product key could not be used after the second time I try to reinstall windows 7 str...?

  Click Start, type: CMD

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Leave the command prompt

  Restart your computer

  Try again activate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc

• I recently bought a Canon 5 d camera SR and when I imported the photos taken in Lightroom RAW gave me the following message: "files are not recognized by the RAW format support in Lightroom (73)" what should I do?

  I recently bought a Canon 5 d camera SR and when I imported the photos taken in RAW, Lightroom gave me the following message: "files are not recognized by the inLightroom of support for the RAW format (73)" what should I do?

  Hello

  Looks like you may not have the latest version of Lightroom as the Canon 5 d R raw files are supported in Lightroom 6.0 and above (not in previous versions)

  Devices supported by Camera Raw

• Cannot start area Planner and the server process in the machine virtual App/lot

  Hello
  
  After the change of /etc/tnsnames.ora in the machine virtual App/Batch:
  
  [Psadm2@psovmab LOG] $ /etc/tnsnames.ora more
  H91TMPLT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  ((ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.133) (PORT = 1521)))
  (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = H91TMPLT.corp.peoplesoft.com))
  )
  
  I can't start Task Scheduler field and the server process:
  
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 197 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 198 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)

  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 793 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec BBL - one:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 773 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 495 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  Try to start...

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 801 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSWATCHSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSWATCHSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSQRYSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSQRYSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSAMSRV o ./LOGS/stdout e ./LOGS/stderr - A - APPDOM d s PSSAMSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKHND o EI ./LOGS/stderr s PSBRKHND_dflt:BrkProcess - APPDOM d s PSBRKHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKDSP o EI ./LOGS/stderr s PSBRKDSP_dflt:Dispatch - APPDOM d s PSBRKDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBHND o EI ./LOGS/stderr s PSPUBHND_dflt:PubConProcess - APPDOM d s PSPUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBDSP o EI ./LOGS/stderr s PSPUBDSP_dflt:Dispatch - APPDOM d s PSPUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBHND o EI ./LOGS/stderr s PSSUBHND_dflt:SubConProcess - APPDOM d s PSSUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBDSP o EI ./LOGS/stderr s PSSUBDSP_dflt:Dispatch - APPDOM d s PSSUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSMONITORSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSMONITORSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JSL o ./LOGS/stdout e ./LOGS/stderr - A - d - m 5 - M 7 - //hrapp.xflash.com:9000 I have 5-j ANY - 40 x 10 - c 1000000 JSH w s:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JREPSVR o ./LOGS/stdout e ./LOGS/stderr - A - W Pei /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 774 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  
  Thank you

  Please, once you connect to the application server Peoplesoft VM with psadm2, run the following:

  env|grep LANG
  

  And post the result.

  LANG should be C, if this isn't your side follow these steps:

  export LANG=C
  

  And re-start the Appserver field.
  To keep consistency during the startup of the server, add the line in the psadm2 user .bash_profile.

  Changed the .bash_profile or any other initialization file? Because everything should be fine by default.

  Nicolas.

  Published by: Gasparotto N on December 30, 2009 19:09

• Can not power on VM after restore acronis backup using VMWare Converter

  I've restored a VM for VSPhere 5.1 using acronis backup VMWare Converter. The conversion completed successfully, but the virtual machine does not start and I get the following error message. Any guidance is appreciated

  An error was received from the ESX host turning on VM Testdns.

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/deb7682b-d932a578/DNS Test/Testdns/Testdns.vmdk'

  Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  Indeed IT loks like a problem with the used file format (twoGbMaxExtentSparse) hard which is no more supported with ESXi. Your options are either convert virtual disks using the command-line vmkfstools on the ESXi host (in this case, you must load the VMkernel multiextent module) or by downloading the hard files and convert them using vmware-vdiskmanager command-line utility. Another option is to download the virtual machine on a local system, and then use VMware Converter to convert to the ESXi host.

  Useful URLS:

  virtuallyGhetto: 2gbsparse Disk Format No Longer Working on ESXi 5.1

  VMware KB: Cloning and virtual machines with vmkfstools disks conversion

  VMware KB: Repair of a virtual disk Workstation 7.1 and Fusion 3.1

  André

• Using Vmware Converter to increase the size of hard drive

  Hi, I just want to confirm something

  I had a few VM with ESXi 4.  Some are Windows 2003 Server and some Server 2008

  Some of the servers I need to increase hard drive space soon.

  I use Vmware Converter to increase the size of this way, I have my old copy of the VM in case.

  My understanding is that if I use the converter to resize the drive, then Windows will automatically be able to use the space, even the C drive.  So he did not need to use a third part util as Partition magic.

  Is this correct?

  Thank you

  Mike

  Fix.

  But you'll have a new vNIC with a new MAC address.

  So don't forget to set your network configuration after the conversion.

  André

• Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  I want to create a virtual machine using VMWare Converter 4.0 from an Acronis True Image to ESXi Server 3i .tib backup file. The conversation seems to be working, but when I try to start the virtual machine, it begins to start, displays the Windows 2003 splash screen briefly and then fails with a blue screen with the following error:

  STOP: 0X0000007B (0XFFFFFADFD520F3C0, 0XFFFFFFFFC0000034, 0 X 0000000000000000, 0 X 0000000000000000)

  Looking through the forums I've seen this error mentioned with 64-bit Windows 2003, but no mention of 32-bit?

  Any help much appreciated.

  THX

  > Thanks, unfortunately the .tib Acronis True image files do not work with Converter 3.0.3

  You already have a virtual computer that start - it's just bluescreens - so no need to run the full convert again.

  Juist use Converter 3.0.3 to configure the virtual machine - part seemed to have failed

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html