The mail is in a loop trying to send the same letter without success

Similar Questions

• I can't open attachments ._DOC. I tried combining write, wordpad and othereswith without success. I refused access to iexpl because of security settings. I have no WORD from the Office of M. advice?

  I can't open attachments ._DOC. I tried combining write, wordpad and others without success. I refused access to iexpl because of security settings. I have no WORD from the Office of M. advice?

  You must change the extension of the name of _DOC in just DOC. Then you will need a program to open the file; the free Word Viewer, as well as a compatibility pack, if needed, should do the job. How to obtain the latest Word Viewer

• Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.

  Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.   Any ideas?  It is my wife's favorite.

  Hello giant,

  It is not possible to use 16-bit on a 64-bit computer applications/games.

  However, you can download and install Wondows XP Mode for windows 7. Later, you can install your 16-bit application in XP mode.

  You can download the application from the link given:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  After back and let us know if it helped to solve your problem.
   
  Thank you and best regards,
  R uma - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to close my account msn without success. I do not have a paid subscription, but it tells me that I do,

  I'm trying to close my account msn without success. I do not have a paid subscription, but it tells me that I do,

  How does this relate to the features of Windows Update?

  See...

  How to contact MSN customer service
      http://support.Microsoft.com/kb/940784

• I have error codes 80070079 and 8007045 D, have tried to install updates several times without success

  Hi all

  I have error codes 80070079 and 8007045 D, have tried to install updates several times without success. They are made to security update & probably really need them.  I was able to other updates but not those four for the last month or two.  Thanks for your help!

  See if this thread is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-7-error-code-8007045D-cant-install-updates/03258f34-3f25-4134-B194-6c18b4acf521>

  UTC/GMT is 01:30 on Monday, July 9, 2012

• Windows allocate two disks with the same letter

  I had a systems problem where the computer would not be arrested because of the computer by providing two different players with the same ID letter ("F") during the race. The program kept asking I have reformat the drive "F". I had a former player ID'd as ('' F ''), I accepted. When the computer has been restarted I had reformatted the bad drive which was not initially ID had as player ("F").

  I get a message stating, Windows has assigned a drive letter for the U3 drive that already has another on your computer, or there is no more available on this machine drive letter. Try disconnecting that drives any network that you have connected to your computer, and then restart U3 by double clicking on launch 3. exe or the U3 icon of the CD-ROM system. Once the U3 Launchpad is running, you can reconnect the network drives.

  I deleted all the additional disks (4) and restarted the computer and still get the same message with all the drives removed. I followed the instructions as guest above and restarted the computer and still get the same message.

  The line above also comes with a troubleshooting option button, but when I select this it takes me to the Web and trying to sell me U3 drives.

  How to resolve this conflict.

  Go to start / Control Panel / administrative tools / computer management / disk (with the drive plugged already of course) and make sure that the screen is maximized and then press the PRTSCR button.  Then click on start / all programs / Accessories / Paint and open and right click on the area map and click on paste to create an image of screenshot of disk management.  Enregistrer save as Disk Manager, then select it. JPG file type and put it on your desk at the moment.  Then, go tohttp://skydrive.live.com/ and open a free SkyDrive account if you do not already have one, then add the. JPG file to a folder on SkyDrive.  Click on the file and on the bottom right, it will provide information on the file whose link to access. Please copy this link and post it here in your next reply so I can see for myself rather than ask a thousand questions on what he says.

  I don't see how you could have used all the letters of reader available unless you have drives mapped to all kinds of network locations or even just disks, partitions or folders on your own computer (but a lot of them).  How many local mapped make you thing you have (as opposed to say the computer)?  I also don't understand how the system can assign the same letter to two different drives, partitions, networkk places, records or other in all circumstances - something is wrong and I don't know what it is given the information available at this stage.  Maybe see Disk Manager will help you.  Which version of Vista you are using (for example, 32-bit Vista Business SP2)?

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to share files between Win 7 computers in the same workgroup without set up homegroup?

  How to share files between computers to win 7 in the same workgroup, without setting up any homegroup?

  We tried to avoid putting in place the homegroup. Because we fear us will not be able to share files between win 7 homegroup computers and Vista & XP?

  Thank you.

  Ok. We got it to work.

  In the folder tab property shares.

  Click on 'Share' - choose people to share with, click on the drop down tab, select 'All', click 'Add', in the table below, to the right of everyone, click on the "Permission level", we choose 'read '. Then, in the background, we click on "share". The next dialog box is 'your folder is shared', click 'done '.

  Click on 'Advanced sharing', [x] check share this folder. Click on 'OK '.

  Then, click on 'OK' to the folder property.

  Then, your folder is shared on your network working group of Win 7.

• I'm trying to open Media Encoder - but without success

  I'm trying to open Media Encoder - but without success. He use to work perfect

  When I start it up, he tells me he's going clouse downwards. What can I do to restore the program?

  Media Encoder is CS6

  Windows 7

  Can you try to keep Alt + Ctrl (Win) cmd (Mac) + SHIFT while launching the SOUL?  This clears the application preferences and can help.

• Is there a way I can share files between users on the same Mac without an internet connection?

  Hello world!

  Quick question here: is there a way I can share files between users on the same Mac without an internet connection?

  I have two users say that A and B. If I go the long way via the 'Go' menu > 'Computer', I ended up being told to contact my computer or the network administrator for assistance. Both users are admin one and file sharing is allowed in system preferences... I have to admit that I use 10.9.5 because my MacBook Pro would not work with OS Xs national parks.

  Any ideas would be cool because I'm sure that it used to work fine with "Snow Leopard" without being connected to the internet - or should I just send an email to myself and recover the files on the other user :-) to recover my USB is

  Choose go to folder from the Finder Go menu, provide/Users/Shared/as the path and place the files.

  (142147)

• Can two people use Cloud applications simultaneously with the same subscription without problem? [was: Hello, my question is...]

  Buy the package "all applications" can two people use aplicacioes at the same time without problems?

  NO.

  The OWNER can activate on 2 computers but use only on one at a time

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations may NOT be used at the same time (noted in the link above of the license)

• Adobe CS5 uninstall - reinstall on the same computer without using the last instructions of activation code?

  I'm on a MacBook Pro with OS X Yosemite.  Computer has been completely cleaned, stored, updated, no problem other than my Adobe CS5 software will not work.  Photoshop, if I'm lucky that it will download, but a few minutes of the crash using.  InDesign won't open at all.  Illustrator, does not open.  Flash, none open - help from Adobe will not update because it says a file is corrupted etc etc etc etc.  I have my original disks with serial numbers to reinstall the software.  All I want to know is how to properly uninstall all the software on my computer and reinstall on the same computer without using my second activation code.  I can't seem to find clear, concise, simple instructions for this process.  "Disable" something before I have uninstall?  Where should I go for it?  What should I do once I have disabled everything I'm supposed to deactivate and uninstall the software, then reinstall?  I must return to some site to reactivate whatever it is I'm reactive?  I don't want to use my second activation code.  That's all.  Why customer comes from say the quick simple solution by phone beggars belief.  Yes.  I am quite aware that it is old software.  But it's your Adobe software.  Support me.  Because when you do not have, I have to post negative passive-aggressive messages like that on a forum online so that everyone can see.  I'm sure that you have all of the embarrassment of opportunity as you read this.  But I just want to assure that I do what I'm supposed to do without screwing anything other than it already is.  Any help is greatly appreciated!

  Uninstall using the own uninstaller from adobe by the use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and reinstall.

  p.s. I'm not an adobe employee and these forums are user forums.

• Get the same results without line of sight

  Hi gurus,
  
  My version of the database is 10.2.0.4.0.
  
  I have a couple of tables as follows:
  
  

  CREATE TABLE xxgroups(group_number NUMBER, description VARCHAR2(30));
  
  INSERT INTO xxgroups VALUES(1,'Group 1'); 
  INSERT INTO xxgroups VALUES(2,'Group 2');
  INSERT INTO xxgroups VALUES(3,'Group 3');
  INSERT INTO xxgroups VALUES(4,'Group 4');
  INSERT INTO xxgroups VALUES(5,'Group 5');
  
  CREATE TABLE xxgroup_persons(group_number NUMBER, person_number NUMBER, first_name VARCHAR2(30), last_name VARCHAR2(30));
  
  INSERT INTO xxgroup_persons VALUES(1, 1, 'John', 'Smith');
  INSERT INTO xxgroup_persons VALUES(1, 2, 'James', 'Smith');
  INSERT INTO xxgroup_persons VALUES(1, 3, 'Joe', 'William');
  INSERT INTO xxgroup_persons VALUES(2, 4, 'Julien', 'Ford');
  INSERT INTO xxgroup_persons VALUES(2, 5, 'James', 'Kelly');
  INSERT INTO xxgroup_persons VALUES(3, 6, 'Francis', 'Smith');
  INSERT INTO xxgroup_persons VALUES(5, 7, 'Jerry', 'Ford');
  INSERT INTO xxgroup_persons VALUES(5, 8, 'Alfred', 'Willis');
  INSERT INTO xxgroup_persons VALUES(5, 9, 'Jon', 'Preston');
  
  COMMIT;

  I would like to get a query to return for each group, the person with less person_number (if no one assigned to the group, then the query must return again with an empty person group). I know I can do this by using for example:
  

  SELECT group_number, person_number, first_name, last_name 
  FROM (SELECT a.group_number, b.person_number, b.first_name, b.last_name
             , RANK() OVER (PARTITION BY a.group_number ORDER BY person_number) person_order
        FROM xxgroups a, xxgroup_persons b
        WHERE a.group_number = b.group_number (+)
       ) 
  WHERE person_order = 1
  ORDER BY group_number;
  
  GROUP_NUMBER PERSON_NUMBER FIRST_NAME                     LAST_NAME
  ------------ ------------- ------------------------------ ------------------------------
             1             1 John                           Smith
             2             4 Julien                         Ford
             3             6 Francis                        Smith
             4
             5             7 Jerry                          Ford

  but it would be possible to achieve the same results without inline mode?
  
  Thank you.

  You can try this function KEEP:

  scott@orapdt>  SELECT a.group_number,
    2         min(b.person_number) as person_number,
    3         min(b.first_name) keep (dense_rank first order by person_number) as first_name,
    4         min(b.last_name) keep (dense_rank first order by person_number) as last_name
    5  FROM xxgroups a, xxgroup_persons b
    6  WHERE a.group_number = b.group_number (+)
    7  group by a.group_number;
  
  GROUP_NUMBER PERSON_NUMBER FIRST_NAME                     LAST_NAME
  ------------ ------------- ------------------------------ ------------------------------
             1             1 John                           Smith
             2             4 Julien                         Ford
             3             6 Francis                        Smith
             4
             5             7 Jerry                          Ford
  
  5 rows selected.
  

• A few weeks ago, I started having problems to make the links and buttons to work on various Web sites. I tried the steps help without success. What gives?

  When I go to some web sites, I can't some of their links or buttons to work. For example, I can't "vote" and see the results on the MSN home page or go to my account on the homepage of Ancestry.com. Some links work, but others do not. They do not work in Internet Explorer either. I tried all suggestions for plug-ins and extensions that gives Support of Mozilla. I have run Windows 8.1, have Java as well as JavaScript. I tried to understand what is happening. Any help would be appreciated!

  Ronmissy2008, it's immediate. I'm sorry to hear about you, not being able to access some links, or use the buttons to vote on issues or read articles. " First, I call your Internet service provider and have them check your router '. There is a possibility that it may need an update of the firmware, because you have upgraded to Windows 8.1. Firmware is integrated software that implements network protocols and security for this specific model of hardware device. More Wi-wired routers and are designed to perform a firmware upgrade process. The manufacturer will be able to make improvements to your router. When I arrived AT & T U-verse, my router updated its firmware that took a few minutes to perform. Click on the link for more information on firmware updates:

  (http://compnetworking.about.com/od/wifihomenetworking/qt/firmwareupgrade.htm)

  If your service provider is done with the update of the firmware on the router, then try to update your Windows 8.1 software.

  1.) Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on settings, tapping or clicking on PC, change settings and then typing or clicking on update and recovery.

  TAP 2.) or click on choose how to install the updates.

  3.) under important updates, choose the option you want.

  4.) under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click on apply.

  (http://windows.microsoft.com/en-us/windows-8/windows-update-faq)

  That's all I could think of at this moment. No doubt call your Internet service provider and let them know you have upgraded to Windows 8.1 and your router needs to be checked. In addition, ask them to update the firmware, if necessary. Then run Windows update. I'll do more research on this issue. Let me know what results you receive after completing the firmware update and windows update.

• 650 satellite will not start, tried the usual suggestions without success

  Satellite C650 willing daughter of a screen empty other than a flashing cursor in the top left when the laptop is turned on. I have read the various threads (not on this site) and tried to turn on/off and pressing F8 (also tried F9 and 0 zero) to try to do a system recovery but nothing else happen to beep for a few seconds and then back to the screen empty.

  She has not the recovery disks. Can anyone help.

  The laptop is under warranty until December 5, but I don't know if it would be covered for this problem?

  A few days ago, I had the same problem. I tried everything but to no avail. I m not 100% sure, but I think it was a virus or something similar something killed hat.

  In my case, only the clean OS install solved the problem. I ve used created recovery DVD and now I use factory again.

  I recommend you order on https://backupmedia.toshiba.eu/landing.aspx's original toshiba recovery disc
  Install the OS using this disk and everything will be OK again.

• PS do not launch in DW CS6, tried the main setting without success, FW launches suggestions wo?

  tried to adjust lance FW as primary, without success, any suggestions would be greatly appreciated

  Steve
  

  @careyonadobe, to add to the answer of Thomas, another thing, you can try to do is do not use the list "Preset" editors pick "Photoshop". Instead, click on '+' sign on my screenshot below, browse to the location of Photoshop, select the .exe or .app for Photoshop file in your hard drive. See if it helps.