The predefined business services?

Similar Questions

• Endpoint URI to the OSB business service

  Dear team,

  We have defined 3 queues in weblogic.

  Business service must publish to one of these queues according to the State. How to dynamically send uri endpoint for a business service.

  Please suggest.

  Thanks in advance

  Hello

  You can override the URI by adding a routing option.

  Please refer to the section "2.4.26 adding and routing of Actions in the message stream configuration" to.

  http://docs.Oracle.com/CD/E28280_01/dev.1111/e15866/tasks.htm#OSBDV178

  Kind regards

  Anuj

• eror message when I connect a profile of the user of Windows Vista Business Service has no logon.

  eror message when I connect a profile of the user of Windows Vista Business Service has no logon. Failed to load the user profile after wimdows update I have this problem I try safe mode but the gel keyboard, I try F12 boot does not work please, someone came to help me I need my computer for work

  Hello

  as you can not get into safe mode and work within the keyboard freezes in safe mode to do a startup repair disk

  then do a restore of the system of breast

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and to read this information to try to fix the user profile cannot be loaded problem

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• OSB: Security: Business Service: configuration of the password Digest in BS

  Hello

  I have a requirement to connect to the target WS. We pass the user name and password (password digest). The target URL is the same, but we have 7 password different and based on a logic that we need to use any one of the password and call the service.

  I can able to connect to the service by adding headers security and demand from business.

  But when you call the proxy business how do I generate the soap headers with collection of password, Nonce, Timestamp.

  This is the header that I used in BS and it works fine.

  " < soapenv:mustUnderstand wsse: Security = '1' xmlns:wsse = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd ">

  " < wsu:Timestamp WSU: ID = 'Timestamp-13' xmlns:wsu = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd ">

  < wsu: created > 2014-07-08T 22: 28:25.395Z < / wsu: created >

  < wsu: expires > 2014-07-08T 22: 29:25.395Z < / wsu: expires >

  < / wsu:Timestamp >

  " < wsse: UsernameToken WSU: ID = 'UsernameToken-12' xmlns:wsu = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd ">

  user name < wsse:Username > < / wsse:Username >

  " < wsse:Password Type = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordDigest "> passworddigesy < / wsse:Password > .

  " < wsse:Nonce EncodingType =" http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-SOAP-message-security-1.0#base64Binary "> announced < / wsse:Nonce > .

  < wsu: created > 2014-07-08T 21: 23:08.455Z < / wsu: created >

  < / wsse: UsernameToken >

  < / wsse: Security >

  Because the password is different do we need to use several business service or can use only one?

  Please provide your comments.

  Concerning

  Use GOSA username token client_policy at the service of the company. Do not substitute the csf - key in politics and set up a service account PASS-THROUGH at the service of the company.

  No need for multiple business. Let me know if this solved your problem or not.

• How Business Service (file protocol) can read the location of the server XML file

  
  Hi Experts,

  I have a use case where I have to expose a Web service and as a response, I send a large xml (size max would be 18 MB).

  Customer <>- ProxyService (exposed as a Web service) <>- BusinessService (File protocol) < - read - > File.xml

  Here the xml response must be stored in the "SomeName.xml" file in the directory of the same server share path.

  So when the Client calls ProxyService, inturn would call it BS, where BS inturn would have read the contents of the xml file and pass it back as a response to the customer via PS

  Challenge is here using Protocol of file I can't do BS to read the xml file, instead his writing in a new file with conent as input message.

  Can someone let me know is it possible to read a xml file using business service.

  Note: I know that the PS can read a file using the Protocol of files, but my BS need use cases to read the contents of the file.

  Any quick response is more significant.

  Thank you

  Deba

  Cannot use the OSB in this case file adapter, you need to use a file in OSB JCA adapter. Specifically, what is called a 'synchronous reading' JCA adapter type file. Can be created in JDeveloper and then pulls in EPCO, can then be invoked as you want to extract the contents of a file synchronously in a proxy stream.

• Urgent: assigning the payload to the WSDL-based business service

  Hello
  
  I have a business service, wound on a wsdl, which the heading message has several part of string tags, now I'm not sure how to pass values to my business as a payload when I am trying to move to this business service, as there is no XSD to comply, and given that the WSDL is a wsdl client so I can't change it.
  
  Kind regards
  Rahul

  Rahul,

  The WSDL file that you have posted here has a single operation with below the structure of demand-

  
  
  
  username
  password
  
  
  
  abcd123
  1
  ABCDEFG
  
  

  You can use SOAPUI to generate the example XML query for each operation of any valid WSDL.

  Kind regards
  Anuj

• The call using two Business service split join in osb

  Hello
  
  While he was trying to call two business using Split to join the BSO I get failure message from selection in the em Bpel console. I use call activity to invoke the BS and assign to assign to the entry. the entitlement, I am assigning * $request.payload/input * to input.payload . In the em console I get entry like this
  
  
  receiveInput
  June 19, 2012 call 17:05:45 received 'process' partner 'bpelprocess1_client '.
  payload of <>
  < variableentree >
  < name of party 'payload' = >
  XXXXX < customer: process > < / customer: process >
  < / part >
  < / variableentree >
  Assign (pending)
  June 19, 2012 17:05:48 error in assessing <>expression "65 online." The result is empty for the XPath: ' / process: client / customer: entry.
  payload of <>
  xxxxxx < customer: process > < / customer: process >
  June 19, 2012 17:05:48 the following exception occurred while trying to execute the operation of copy on line 63
  payload of <>
  < bpelFault >
  < faultType > 0 < / faultType >
  < selectionFailure / >
  < / bpelFault >
  June 19, 2012 17:05:57 "BPELFault" has not been taken by a catch block.
  June 19, 2012 17:06 the transaction has been restored. Work for bpel '650002' instance has been restored, but the audit trail has been recorded for this instance. A synchronization request, please refer to the customer's request. If it is an asynchronous request, please recover from the recovery console to resend the message to invoke.
  
  
  Can anyone help on this?
  
  Thanks in advance...

  Hello

  I created a sample split join to assign you with a similar use cases that you tried, before the invoke activity that you call a Business Service, an activity Assign Action and write the payload of body in the field of expression and in the variable field, I chose my input activity Invoke variable which is InvokeInput.payload.

  Payload body I pasted in the expression field looks to...

  ------------
  
  Input samples
  
  -----------

  Hope this helps,
  N

• Busy service

  Hi I can not create a support request for my laptop that is under warranty. He says just 'busy Service' whenever I submit the serial number of the product. The power to my T440 brick broke, it will not power or recharge the battery. How can I create a ticket to get this replaced?

  Looks like their number is the following:

  THINK brand products
  English
  03705-500-900 (local rate)
  (The standard warranty support)
  09:00-18:00 Monday to Friday

• backup service Windows are not not under Vista Business services

  The backup service is not listed in the list of services under administrative tools. What is the name I have to search on Windows Vista Business (Ultimate used on this machine before but not more)?

  Hello

  It's an instance of installation of vista operating system that you have posted in

  This is a microsoft specific forum for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Log on to the fault: "the user profile Service service has no logon. User profile cannot be loaded.

  have a 610 Compaq with Vista Business - can not log - message reads "the user profile Service service has no logon. User profile cannot be loaded.

  have a 610 Compaq with Vista Business - can not log - message reads "the user profile Service service has no logon. User profile cannot be loaded.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• THE USER PROFILE SERVICE service failed the logon__User profile cannot be loaded

  I read the previous discussions, so what I need is someone who has the patience and the time to walk through Windows 7 Home Premium for Dummies with me.  I have a friend who has updated all my software on Windows 7 and has added many other applications for a handsome sum.  A FRIEND.  I was on my labtop there is only 1 hour returned to connect and I get this message to the CONNECTION SCREEN...

  THE USER PROFILE SERVICE service has no logon.
  User profile cannot be loaded

  I'm on the front screen.  No office, NO option to use a different connection name, no Director... Just my name and my password.  My Blue tutorial button to the left and my red farm option to the right.  I can't do all the things I've read on because I can't get the properties... blah blah.  I know that I delete anything... I could not... I don't know how.  I just need help, restore peace of mind only I get from a busy daily life.

  Peuvent some please help?

  Hello

  This also happened to me in another case. All local users are unable to connect they get this error. For example if I enable comments or create a local user account that is a member of the 'users' group I get this error when you connect using the accounts of the said that has been set with a blank password. However, I was able to use my administrator account to manage my machine. You probabbly deleted your permissions on the "C:\Users" folder or the root of the drive itself. If you have a local account, you can plug this hard drive into a computer with the same OS as slave then add "everyone" group with full control and select inherit permissions from parent. Restart, and then try. I hope this helps. C =

  -Julius P.

  MCP, MCDST

• Business services switched from blackBerry Smartphones. emails not working not

  I used a unlocked Blackberry Bold 9900 with Rogers in the Canada.  I am in the United States for 5 months and released an ATT plan with data.  I can access the internet, but I'm not getting my emails.  It is said that the Blackberry Internet Service is not connected.  ATT says I need to speak directly with Blackberry to get connected, but it does not seem that option on the site by phone or Blackberry.  Suggestions please.

  Hello

  ATT not quite answered you completely. Indeed, there is no method to contact you BB directly, however... only through formal escalation of a carrier can talk you (for free) to BB directly. It's him formal support how works and ATT have responded you more completely that they did.

  Change of carriers can be tricky. I would advise you to first talk to Rogers and get them to be sure that they have fully released for your device to BB PIN of their system of BIS to 100000%. After that, then check with ATT to be sure that your specific device model is even compatible with their network for AUTOMATIC HRT delivery and maintenance of your appliance.

  If these two are OK, then they (ATT) should be able to set up a BIS account for you in their system. If they cannot, try to get them to tell you exactly why, but do not let you fob off with the answer they gave so far you (because it is impossible to do anyway). They can certainly look deep into their system to tell you what the problem is... for example, unless Rogers really frees your BB PIN of their system, ATT simply cannot create a BIS account to your device.

  In the worst of the worst, I heard that a conference call between the support of BB (note... NOT support the front line, but rather Support dedicated BB) teams of BOTH carriers can sometimes clear up questions.

  But, all in all, unless there is something weirder going on (for example, your BB PIN declared as lost/stolen and locked so far from any business by creating a BIS account), Rogers should be able to release your BB PIN and ATT must then be able to create a BIS account to your device in their system.

  They shouldn't need any involvement of BB to do all this.

  Good luck and let us know!

• BlackBerry smartphones can not change the electronic signature with the Blackberry Internet Service on Orange

  Hello

  I'm on Orange and I am trying to remove the signature when I send the email to my gmail account.

  An earlier thread was really useful-

  R Man

  I'm going crazy trying to figure out how to change the signature on my blackberry curve 8300.  I'm with Orange Business.  On my camera, it displays the option, but cannot be changed.  On my bill online orange it does not mention - in fact it is impossible to get information from blackberry.  Could someone help me?  I keep seeing references to the 'BIS' - which I suppose means Blackberry internet service - but this does not seem to help me?  This is a website / option on the phone / or what?  DRM for any help...

  Bifocals

  Hi and welcome to the forums!

  You're BIS correct is the Blackberry Internet service.

  If you go through the icon to setup e-mail on your phone, you will actually the site of the BIS.

  If you can not change your signature through the device, you can connect to a PC Web site.

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

  The Orange UK BIS site

  https://bis.EU.BlackBerry.com/HTML?brand=orangeuk

  The BIS of the procedures via the PC site

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB03781&sliceId=SAL_Pub...

  But when I go on the site of Orange UK BIS I can't set up a new account as it says there is a already for my phone, and when I clicked on the link "forgotten password" and I sent myself a message that 'username and password do not exist.  Please use your device to access Blackberry Internet Service. "When I use Setup email on the phone, I can see the signature but not change.

  Y at - it a help for me, or am I stuck with this signature?

  Thanks in advance.

  the fastest is to call Orange UK and they will tell you how to connect to your BIS account for editing.

• WebDAV option does not appear on the "Wizard Add Services of role" even after installation

  Hi all

  Here I have an installation Windows 2008 Enterprise SP2 with IIS 7 installed on it. Thus, even after installation of WebDAV through its installer (as seen here ), WebDAV option does not appear on the "Wizard Add Services of role" (under the direction of "Common HTTP features", as seen here)

  I already tried to reinstall IIS and WebDAV role expansion, but no goals.
  Any ideas what goes wrong?

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

• OSB 12 c: Business Service can not reference foreign JNDI

  Hello everyone

  I have two machines. First machine running Weblogic 12 c with some deployed EJB´s and second machine running Weblogic 12 c with Oracle Service Bus 12 c.

  For various reasons, I must have the possibility of invoking the EBJ (first machine) by the (second) Bus Service

  My first step was to create an EJB HelloWorldService, and deploy it to the first machine. Is the remote interface of console weblogic JNDI name. It can be invoked java application and works very well

  EJB. HelloWorldBean #es.enrique.ejb.HelloWorldBeanRemote

  
  

  I then created a foreign JNDI provider in the second machine (OSB one), using the Weblogic console

  
  

  

  I also have a JNDI connection to that called foreign JNDI provider

  
  

  ForeignJNDILink-0

  
  

  Now, I want to configure a business service with access to the foreign JNDI provider. When I put the URI of my business abroad JNDI, I just created, access it complaints by saying:

  
  

  The JNDI ForeignJNDILink-0 there is no provider

  
  

  
  

  Can someone please explain to me what I am doing wrong?

  
  

  My understanding is that the OSB should see the JNDI foreing supplier because they are both in the same machine (the other)
  

  
  

  Thanks in advance
  

  
  

  Ok. I thought about it.

  Instead of working from the web browser, I tried JDeveloper.

  From there, you can create a "JNDI prodiver", specify EJB machine URL, user and password.

  At this point, you can create a Business Service and set the URI: "jejb: [name of the JNDI provider]: [full EJB JNDI]."