The process of creating repetitive form

Similar Questions

• Hide the filling while creating a form (need help)

  Hello

  I crossed to Illustrator after use Freehand for many years to create my vector art. I'm fighting with illustrator but because I tend to create lines by a form. example here http://www.dot2.uk.com/sugar.html so I need to be able to make these forms while being able to hide the filling. Hope that makes sense. Can you help me (I mean, it's... When you create a form using paths, it tends to fill the area that you create! I don't want that, I just need to see the way I created and so he can fill when it is in place.)

  

  Perhaps this step might help, the blue form is in layer 1 and the other layer of shapein 2, if you press 'Ctrl' + clik on the "eye" icon, you will see this form in mode plotted.

• How uncheck you a checkbox to the radio while CREATING a form?

  There are a lot of discussions about how to disable a checkbox radio on a form to fill out, but what about when the form was created? I get 2 phone numbers in my form and I need the customer to check their main phone number. So I really need a box of the radio. While creating the form in Acrobat, I hit preview to make sure that everything is going well and when I test the check radio boxes, one of them is activated and I can't cancel it. I don't want a default checked telephone numbers, but rather wish both uncontrolled until the client fills out the form. How can I get rid of this preview control?

  Yes, it will certainly work as you want with check boxes. As mentioned, the key is to give them the same name, but different value of exports (for example, Yes, no). You set the value to export on the Options tab of the field properties dialog box.

  To reset a form in Acrobat 9, select "forms > clear form.

• Check all the items of the box manually created tabular form

  Hi all
  
  A manual generated in form for users to enter data more effectively, we need to create several columns are by using the checkboxes as:
  
  apex_item. CheckBox (10, empno, decode (jobtype, 'P', 'CHECKED', null)) jobtype
  
  Is there a way I can add a checkbox in the column header when the user clicks the header of each checkbox in the column even is will be checked? I found this blog of Carl,
  
  http://carlback.blogspot.com/2007/09/mini-check-all-HOWTO.html
  
  very useful to know but unfortunately none of our box columns are in the first column.
  
  Thank you very much for your time and your help.
  
  Best regards
  Pete

  Replace f01 f10 and add onClick = "checkAll (this)" your master check box in the header. " This is taken directly from the generated apex tabular presentation.

  
             function checkAll(masterCheckbox) {
                  if (masterCheckbox.checked) {
                      for (var i = 0; i.checked==false) {document.wwv_flow.f01[i].checked=true;highlight_row(document.wwv_flow.f01[i],i);}}} else {rowsNotChecked=0;for (var i = 0; i
  

• What is the process to create WiFi network with laptops?

  I want to connect several laptops within our own created WiFi network. So please guide me on this network to create and add portable computers in this network that will generate.

  Hi priyagayatri,

  Welcome to the HP community! You might be able to do what you are looking for, but this will depend on a number of things. I will need more information from you. What is your product number? What operating system do you use?

  Find your product on a laptop number:

  http://support.HP.com/us-en/document/c00033108

  Find your operating system:

  http://Windows.Microsoft.com/en-CA/Windows/which-operating-system

  Thank you

• How can I import my folders of bookmarks created on a Dell laptop to an Apple iMac and clean up the mess I created trying to create a new set of bookmarks and folders on the iMac?

  I couldn't find and import from the version of Firefox on my Dell laptop to an iMac from Apple records containing the addresses of favorite Web sites. In the process, I created a hodgepodge of unwanted bookmarks. Please give me a step by step process to import the files into the version of Firefox on the iMac. The process to achieve this seems very awkward and counter-intuitive. Goes the same for the creation of new files and Web site addresses in these files on the version of Firefox installed on iMac of bookmarking.

  The easiest way is to use the Sync feature to synchronize the bookmarks on the two installations of Firefox. To use sync, please refer to How can I set up Sync on my computer?

• Driver management has completed the process to add the HdAudAddService Service

  At windows 8, just upgraded to 8.1 windows and sound does not just work. I refreshed the pc, the sound seems to come back but then then after 10 hours, the problem came back use a toshiba satellite pro just 1 year and it is in perfect condition until I upgraded to 8.1 windows and this is the message that appears on the sound properties

  Driver management has completed the process to create the Service HdAudAddService of ID device Instance HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0.

  Driver management concluded the process to install the driver hdaudss.inf_amd64_70c6945afa5f06b5\hdaudss.inf for the Instance ID of device HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0x0.

  Method 1 worked 100% here!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/driver-management-has-concluded-the-process-to-add/04857a5a-5c8e-4790-9D24-5f4c40591a0e

  YES!

  No need to uninstall my drivers!

  I worked in the Services and tinkered with him and he started etc but change for local totally worked!

  YES!

  Thank you!

• That one is the best way create a parameter to use to call report

  Designer/forms have the ability to create a form with no linked items (columns of data inot according to) with lov to reports...
  
  How can I do this with adf bc, jdeveloper.
  
  Thank you

  If you don't need the database interaction you do not have to use the ADF BC for your reports calling.
  It would be simpler just to write a simple Java class that has a method that accepts parameters and call reports - then you can expose it as a data control and link to your JSF pages.
  Here is a basic example of how to work with a simple class in service data control:
  http://blogs.Oracle.com/Shay/2009/07/java_class_data_control_and_ad.html

• Invoke the process of implementation of the method of automatic activity

  Hello
  
  I want to call a business process of the automatic activity of another process craft deployed on the same engine and same project as well. Please provide steps, if possible for the same thing.
  Thanks in advance.

  Hello Ketan,

  Here's how you can create an instance in a process using the logic in the activity of the automatic method. This example uses the "Fuego.Lib.ProcessInstance.create ()" method below within a process:

  // "args" is an associative string array (Any[String])
  argsIn as Any[String]
  // this assumes that the Begin activity has two argument variables
  //   named "nameArg" and "amountArg" and you're setting them
  //   to the variables "name" and "amount" respectively
  argsIn["someArgVarName"] = "Hello"
  argsIn["someBpmObject"] = myBpmObject
  
  // logic here to determine the name of the process to create an instance in
  idOfProcess as String
  idOfProcess = 
  ProcessInstance.create(processId : "/" + idOfProcess, arguments : argsIn, argumentsSetName : "BeginIn") 
  

  ProcessInstance is in the catalog inside Fuego.Lib.

  The processId parameter (the variable "idOfProcess" in the logic above) is the thing that I most often live with that. This is the text that you see when you process in the project right-click browser tab-> "Properties". Look at the value in the field 'Id' and not the field 'Name' (the name without a space). Prefix with "/" as presented here and if you have deployed this using a unit of Organization (UO) then prefix this chain also.

  The third parameter is almost always "BeginIn". Start of activities in a process can have several incoming argument mappings, the default value is "BeginIn". See your, double-click the process Begin activity and seek on behalf of mapping in the upper left corner of the dialog box.

  "argsIn" is the set of variables of incoming arguments you want to spent in the process. A common error is to type the names of the variables argument entering without the double quotes, as follows:

  . . .
  // this will *NOT* work
  argsIn[someArgVarName] = "Hello"
  argsIn[someBpmObject] = myBpmObject
  . . .
  

  Here is the correct syntax:

  . . .
  // this *WILL* work
  argsIn["someArgVarName"] = "Hello"
  argsIn["someBpmObject"] = myBpmObject
  . . .
  

  In this example, the process has two argument variables. It doesn't matter if the incoming arguments are arguments of primitive type (e.g. String, Integer, Decimal...) or objects of BPM, it is always in the same way. In this example, there is an incoming string argument, called "someArgVarName" and an argument entering BPM object called "someBpmObject".

  Hope this helps,
  Dan

• The replacement of the PK in the process to insert the form after this

  Hello

  I'm quite new in the world of the APEX and I'm having a problem I want to please appreciate any input on... I use APEX 5.0.

  I have a form page to insert (P2) to a new section in my table of queries (with PK of 'ID' column). The billing ID (P2_ID) page is hidden (not sure if that makes a difference)... I then have a process after submit type "Send E-mail" and I want to include information about the new entry in the email.

  Each substitution that I do, as & P2_Description, & P2_Requester. etc works fine, but the replacement of the ID (PK - & P2_ID) does any work. I presume it is because at that time, the recording has not intervened in the table, and the sequence/trigger has not generated the following value?

  How can I please pass this value to the process/electronic mail? I tried to use P3_ID (P3 being the form of update page) and it works, but it always sends the previous entry.

  I'm sure that it must be simple, but as I said I'm pretty new to APEX and could not understand how! Is it possible to have this identification number to pre-fill the next value in the table field, before the present? And what happens if someone else creates a new entry at the same time?

  Thanks in advance

  George

  Hi George,.

  User807933-Oracle wrote:

  Thanks a lot for your reply Jitendra,.

  Do I have to use a different page for "Return Key in Item" element other than P2_ID?

  Under the settings for the DML processes, I have:

  Primary key column: ID

  Main key: P2_ID

  and added P2_ID to return key in the element. Support operations is just "Insert..."

  However, it is always empty when it arrives on the enamel. My process to send the e-mail message must be in a different area? I'm currently after shows. Maybe add to the treatment area, after the DML process?

  Thanks again!

  How are you referring to the item values in the process of your e-mail?

  your mail sending process should be after the insertion process.

  Kind regards

  Jitendra

• I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why.

  I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why / tell us step by step what we should do?

  OK, I re-read your question. It's actually expected behavior. The user must manually send the email.

  If you want it to be a silent process, then you must either install a script on the local computer of the user who will do this, or use any email but something as a service web to which you directly submit the form data.

• Hi, I need to know if it is possible to create a form to send emails on behalf of a user of the site automatically

  Hello

  I would like to know if it is possible to create the process described below?

  We want to transfer and distribute e-cards with messages customized through built-in forms. We want customers to be able to enter information into these forms so that an e-card can be sent automatically to the email of the recipient. The recipient must then be able to click on a link that will take them to the e-card (hosted on the site) where they see the card and a personalized message below.

  Thank you

  IFF the receiver is already in the CRM possible BC to send them an email triggered by a form submission. (Defining EID to the ID of the recipient sends the autoresponder form to them, rather than the issuer of the form).

  To send emails to the arbitrary address, there is no support in British Colombia. You integrate a third-party solution.

• Problem by invoking the process task on the update in the form of process field

  Hello world
  
  I extended LDAP ICF connector...
  I created the domain name like AccountOwner < search >
  I try to AccountOwner update creation process, but is not triggering the process task when the accountOwner field is changed
  This case invoking the task in process of update UD_LDAP_USR if any field changes in form
  Anyone has an idea on the problem of higher level
  Can give you some ideas why this was not the exception
  
  
  Kind regards
  
  Nana Gorrepati
  
  Published by: nanga Cormier on March 1, 2013 12:20

  You get only one or the other in this task you mention. If your process definition contains "Update UD_LDAP_USR" as a name for the task, it will still work to update any field. If you want tasks to run individually on a change, rename this task as "TEMP UD_LDAP_USR updated" so it does not fire.

  -Kevin

• IOM 11 GR 2 - unable to suppress the display of the process iPlanet form

  11 GR 2 IOM or 11.1.2
  SJSDS connector 9.0.4
  
  I have configured the SJSDS connector, it resources, etc. and can manually directly available iPlanet to a user of the IOM through the interface of the identity.
  I configured the process shape to pre-fill all the necessary fields.
  I checked the box Auto Save form within iPlanet process user definition.
  
  It is my hope that when the administrator directly affects the resource to a user they will not be presented with the form to process. However, when we directly allocate the resource, the process shape appears causing the administrator to submit the form.
  
  I double checked the documentation for Auto Save form in the developer's Guide to Oracle Identity Manager 11 g Release 2 (11.1.2) - E27150-03 and the Guide of connector Oracle® Identity Manager for Sun Java System Directory Release 9.0.4 - E10446-12 and I think that my expectations are correct.
  
  (1) no matter who has successfully deleted the form of courses on-line or manually provisioning SJSDS via the interface of the identity?
  (2) would Auto Save form only linked to demand of commissioning?
  
  Thank you in advance.

  They are also good questions, but I'll give you the details :-)

  (1) what does the box 'Auto Save form' useless? -

  NO, if you don't do this then your Provisioning will be blocked in the Validation System.

  (2) you can "Auto-save" the form of the Application Instance?
  According to Oracle either hide these attributes or delete these attributes, but there is no clean way to remove such things.

  Question for you:
  If you don't want automatic backup of your Instance of form then why did you create that.

  Workaround solution:
  If you don't want Application Instance and then create an Instance of the Application more without any form

• Is it better to create a form for the 25 different forms?

  We have a Telco Application (in the form of 10g) which has about 200 forms that are called from the main menu. Off than 200 forms on * 25 * are forms of type 'upload file' (see below).
  
  http://www.freeimagehosting.NET/alg6q
  
  As you can see, it's small size. The feature is:
  *(a.) Select a text file (which includes tabular data) of the client computer.
  When the file is selected, it is also copied to a directory on the DB server machine. The file name displays the full path of the file in the client computer.
  * (b) * when the user press the load button, form calls a stored procedure that is packed. We create an EXTERNAL table mapped to the file in the directory db and read the contents of a temporary table in the comic book.
  * (c) * when the user press the Process button, the temporary table is read and our Telco tables are updated using these data.
  * (d) * you can view the records of error and the correct records discovered during treatment, with the option to view the file . This will display 2 Oracle reports.
  * (e) * you can delete the contents of the temporary table by using the option delete temporary .
  
  This story goes like this: our application is in the form of 10g. Now, we want to update this application Forms 11 g value. We met one of the problems was the FileUploader bean that we use in the forms above. This does not work in 11g. Solution has been found using WebUtil. Now, we must change all the 25 forms (obviously).
  
  
  Now here's the really important part: our managers feel that in the future also we may have to move to these 25 forms (due to problems/upgrades future with WebUtil and so on) and they want us to create a form for 25 forms. For example, in a form.
  
  (a.) we have a list box at the top where chooses to uses which upload function he wants.
  (b.), the file is selected (and then transferred to the DB directory).
  (c.) now when users click on the load button to execute the charge process packed for the selected workload file option.
  (d) when he pressed the Process button we need to run the program for the selected file download function unit.
  (e) when the user presses the button view the file, it should display the correct records and invalid records (found after treatment) 2 speed. The reports differ from a function to a function.
  (f) it can delete the records in the temporary table by using the Delete Temp button.
  
  Is it good idea? My first study tells me that it isn't a good idea since we have a form with too many features. What are the advantages and disadvantages of this approach and what is the best solution?
  
  Published by: user12240205 on June 25, 2012 01:16

  The code is not DUPLICATED. The code to load and process is completely different from form to form.

  Looks like the old method of copy-paste-adapt.
  But it surely is something all forms have in common, no? Even if the code is not duplicated the process is (select the file, download it, treat it, call a report, delete temporary data). Look at what needs to be done in general, create an API on that and let your forms to use this API. Ways to form stuff can be done via the user triggers, procedures referenced/copied, etc.. If I were you I would go back, look at the code and see how I can do an API.

  see you soon