The reports of dashboard Section (view horizontally)
Hi allI have several reports in a section of the dashboard. But it shows one followed by the other as show below.
------------
REPORT1
Report2
Report.3
Rapport4
---------
but I want to display horizontally as
---------
Report1, Report2
Report3 rapport4
----------
Provide suggestions or the inpurts. Thanks in advance.
S
Same as with guests... Put all three in a column and in the properties, select 'display horizontally '.
Tags: Business Intelligence
Similar Questions
-
Navigate between the report and dashboard and pass values between another column
Hello
I have a question about navigate from 1 report to a dashboard page passing value from column 1 to column 2 in the second report...
In OBIEE 11 G, I create link action report 1, column 1 and this link from the action is go to the content of the BI and the destination is a dashboard page, which has used 2 column as a dashboard and there are 3 reports that all use column 2 to filter. Now, the dashboard page 2 column is an alias for column 1 report 1, from the point of view of users, these are the same, but OBIEE point of view, they are different.
My action link is able to access the dashboard, however, the value in column 1 which I clicked on run navigation, not are placed in column 2 as the line of dashboard does not receive this value when navigating...
Since I can't put column 1 in dashboard 2, nor that I can put the 2 column in the report 1. Because our data model is done in the way that if I use column 1 or 2 in both cases, it will be o-ring...
Is there a way around this problem?
Let me know if I need to elaborate
Thank youHello
You are going to have three main dashboard page (i.e., dashboad1, 2, 3) in the dashboard you will be having 3 different relationship with different column aliases (e.g. columnx_alias1, columnx_alias2, columnx_alias3) and you're going to have a dashboard more page say dashboardx a report with columnx. Now if you click on report of dashboard1 to go to dashboardx, click on report of dashboard2 also should go to dashboardx, click dashboard3 report should also go to dashboardx.
1 > you can create 3 variable presentation for column 3 aliases and hide. {{{You can use the union query in sql result say columnx select from table where columnx='@{column1}' union select columnx table where columnx='@{column2}' union select columnx table where columnx='@{column3}'.
2 > now you can hide these guests with variables.Please let me know if you are facing a problem.
Thank you
Yacoub -
Table of contents in the report of the wcf
Hi, I'm looking for include the Table of contents in a report of wcf (by setting the 'see the Table of contents' true in the display configuration layout PDF) and see a blank page is generated for the Table of contents page. The report contains several nested views (up to 4 levels), I tried with different values for "Max depth of content table" 1, 2, 3, 4, 5 and see the page table of contents is always empty. "" Can you please indicate what could be wrong. Thank you, Vincent
Hi Vincent.
Can you post a screencap of report definition page?
Thank you
Robert
-
Hidding in the dashboard Section
Hello
Can someone help me on this please
The requirement is to make a dynamic dashboard where I want to hide some views in the article. IAM doing a Top 10 customers of revenue to regions of the United States, EU, AP. and I gave a dashhboard page guest like "REGION" for the United States, the EU and the AP. This time, I have created a section of the dashboard with three different views for US, EU, AP
If I select any region from the prompt, I should be able to see the three points of view and if I choose the American region, the views of the EU and AP should be hidden. How to get there?
any help will be greatly appreciated.
Thank you
LindaOn the page of dashboard edition, there are properties for each section to set. One of them is the guided navigation. With a guided navigation, you can show or hide a section, according to the results of another query. When this 'conditional' request return lines, you can decide to show (or hide) the section.
First, you must create a separate section for each request. "When you select" US "in the dash prompt then only indicate the section with the American report. The other sections need to be hidden, no?
You must now create conditional queries, which means that 'US' is selected in the dashboard line:
(1) the conditional request for U.S. section must return lines-> U.S. section will be hidden
(2) the conditional request for the EU section should not return lines-> section EU will be hidden
(3) the conditional request for the AP section should not return lines-> AP section will be hiddenThen you must think wisely how to create these conditional requests.
You can consider a request now only the column of the region.
Then you add two filters:
For the request of condtional US:
(1) region is equal to (protect US this filter with filter option)
AND (2) region is invitedTo demand parole of the EU:
(1) region is equal to EU (protect this filter with filter option)
AND (2) region is invitedTo demand parole from AP:
(1) region is equal to AP (protect this foli with filter option)
AND (2) region is invitedWhat happens when you select EU in the dash prompt:
The conditional request US not returns no lines-> U.S. section will be hidden.
Demand of the EU conditional returns to lines-> section EU will be visible.
The request of condtional AP don't returns no lines-> AP section will be hidden.Kind regards
Stijn -
issue of XML report while displaying the total in table @section
Hi all
face the question to the report xml editor.
description of the problem:
view @section block, I have the report total is there, it is the display of each page of the report, I want to display only the last page of the report.
No matter what adea, please share...
Thank you
NicolasTry this
Just keep the total after the end of each, then you will get only on the last page.
or
Logic needed
end="" if=""?>
or send me the model and the xml I can try at my side. E-mail: [email protected]
-
Displays the name of the report in the view 'no result '.
Hi guys,.
It's 10.1.3.4.1
In the * 'No result' view *: is it possible to retrieve and display the name of responses dynamically?
I found two sons:
Do not change the default value, no results text
http://forums.Oracle.com/forums/thread.jspa?MessageID=8312398 & #8312398
Show the title of the report (header) when no results
http://forums.Oracle.com/forums/thread.jspa?MessageID=4575238 & #4575238
but these solutions require customization on a per report basis, and the name of the application must be hardcoded.
Ideally, I would like to have something like:
' Not found for report < script type = "text/javascript" > print report.name < /script > '
I can actually put in the noresults.xml file, which would affect all applications that include the display 'no result '. Replace the section of scorecard or hard code them the name of the application in the results not seen is not easy to manage.
Any ideas or recommendations?
Thank you, best regards.
Alex. -.Hi Alex,
Ideally, I would like to have something like:
' Not found for report '
First thing is seen results no. He's not accepting the "HTML/JavaScript", so we cannot reach the above syntax
Second... There is no option available in results view dynamic name no.
You can do this for the title, but as you say manual labor he's be there
Thank you
Angelique Varanasi -
Disable right click in the report viewer
Hello
I use report viewer provided with Visual studio 2010.
I have a created a drill holes in the report, and when I consider the report of the application (not preview mode). on the right by clicking on the links, I get options like (opens the link in a new tab) etc. I need either disable right click inside the report viewer or remove some of the options in the list that is displayed on right click.
Please give me some solutions to this problem.
Thank you
Ganesh Kumar S
Hello
Please repost your question in the Forum of Visual Studio 2010.
Visual Studio 2010 Forums category:
http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio
Concerning
-
How to get the angles of view (horizontal and vertical) camera?
How to get the angles of view (horizontal and vertical) camera?
The horizontal and vertical field of VIEW properties are available with the camera_get_physical_property() function.
Who is using the C API of the photo. I don't think that you can access by using the control of the camera of Cascades.
-
Using the value of the column of the report in view state
Hi all
I have a little trouble as long as you report column. Here's the problem I have face.
I have a classic report in apex5 (universal theme). Please find the page here https://apex.oracle.com/pls/apex/f?p=62495:5:
I want to have a condition that SAL column should appear only if DEPTNO! = 10. For this, I put a conditional display for SAL column that "point value / expression 1 column! Expression 2 ="and #DEPTNO # expression1 and expression2 10. But this doesn't seem to work. Can someone help me understand the issue.
Note: I want to view only the column of the report, not the page item in the condition.
Thank you
Stephanie.
Kalesh Ravi-Oracle wrote:
I want to have a condition that SAL column should appear only if DEPTNO! = 10. For this, I put a conditional display for SAL column that "point value / expression 1 column! Expression 2 ="and #DEPTNO # expression1 and expression2 10. But this doesn't seem to work. Can someone help me understand the issue.
It is not possible to report baseline values in the State of the reference column. It would be unwise to do so: how APEX can determine if the column should be included or not until all rows are retrieved?
Note: I want to view only the column of the report, not the page item in the condition.
Why? In the example given, this is the correct (and more effective) approach. If the condition must be based on the expected query results, then use a Exists (SQL query returns at least one row) or NOT Exists (SQL query returns no line) condition.
-
How do I view the report of jasper in a separate window in the adf application?
Mr President.
How do I view the report of jasper in a separate window in the adf application?
Concerning
User, tell us your version of jdev, please! You work on this forum long enough to find out!
This https://technology.amis.nl/2011/07/28/adf-11g-show-pdf-in-a-popup/ blog shows how to get pdf. You will need to change the blog to generate first your repost. Here's a thread responding to the same questtionn
Open a report in a new window ADF 11 g
and Re: open a Jasper State in the new page using servlet
Timo
-
Report of BEEP in the use of the content on the Emdedded OBIEE dashboard not working not
Report of BI Publisher throwing error 'Allowed access' seen OBIEE dashboard page.
OBIEE and BEEP is integrated by default when it is installed.
Requirement:
Embed report BEEP in OBIEE dashboard page.
Report parameters a BEEP and then tried the method to incorporate the full report without "Header" information below
Steps for coating
1. connected to BEEP via the URL xmlpserver and link report generated using option "report sharing link.
Below the URL generated for the 'No Header' option
http:// < Server >: < port > / xmlpserver/training/My_Test/Data Model Editor / Oracle BI Analysis Report.xdo? _xpf = & _xpt = 0 & _xdo=%2FTraining%2FMy_Test%2FData%20Model%20Editor%2FOracle%20BI%20Analysis%20Report.xdo & _xmode = 2 & _params_dashboardexpr = xdo%3Axdo%3A_paramssaw.param.Month_div_input=All & _paramssaw.param.Month = * & product = _xt & _xf = html & _xautorun = true
2. copy the generated URL
3. connected to OBIEE analytical URL and created a new dashboard
4. slipped and fell "Embedded content" Dashboard object
5 a. provided the URL copied in embedded content
6 saved the dashboard and it ran.
7 error received unauthorized access
Please note that I received as "Suspicion of Injection of Script" error sometimes.
I see that no permissions related issue because I've been running reports by using administrator privileges.
Details of the attached error.
Thank you!
Problem has been solved by following step below
The spaces in between the name of the report template/folder/data should be replaced with % 20.
URL before change
http://
: /xmlpserver/Training/My_Test/Data Model Editor/Oracle BI Analysis Report.xdo?_xpf=&_xpt=0&_xdo=%2FTraining%2FMy_Test%2FData%20Model%20Editor%2FOracle%20BI%20Analysis%20Report.xdo&_xmode=2&_params_dashboardexpr=&xdo%3Axdo%3A_paramssaw.param.Month_div_input=All&_paramssaw.param.Month=*&_xt=Product&_xf=html&_xautorun=true URL after change
http://
: /xmlpserver/Training/My_Test/Data%20Model%20Editor/Oracle%20BI%20Analysis%20Report.xdo?_xpf=&_xpt=0&_xdo=%2FTraining%2FMy_Test%2FData%20Model%20Editor%2FOracle%20BI%20Analysis%20Report.xdo&_xmode=2&_params_dashboardexpr=&xdo%3Axdo%3A_paramssaw.param.Month_div_input=All&_paramssaw.param.Month=*&_xt=Product&_xf=html&_xautorun=true -
How to activate the keys to generate and view the AWR reports Developer SQL
Version: 4.0.3.16
Build: HAND - 16.84
S/n > (sid) > Performance > AWR report viewer
I am able to select the start and end ID, but the following buttons are disabled:
- Entries Toggel
- Generate the report
- Save to file
- Open in browser
What needs to be done to enable these buttons?
Hello
After entering start Id and the Id of the end, the button "report" will be activated, and then after that the report generated (by clicking the report generate) rest buttons button is activated. As shown in the image below.
Hope it will be useful.
Kind regards
Sanjaya
-
Report of dashboard only to show after click on the button APPLY in the fast dash
Hi gurus,
Is there a way to only display the report in the dashboard if you click APPLY?
By default, even if there is a quick dash, the report shows all values.
We hope you were able to get my point.
Thank you
See here: http://www.mandsconsulting.com/creating-a-run-button-on-a-dashboard-in-obiee-11g
I've done before something similar to, and then above following.
Marc
-
Navigate to the Pivot of the report view
I have a relationship with a column defined as a Navigation to another report. "Is invited" all the filters are defined, and it does not, except for the total line - he does not appear. According to me, when I click on the column, accessing the view or table rather than the opinion of Pivot, which totals are seen.
How can I configure the Pivot display as default view of the report? I don't see other parameters in the Format box of the column where I put the URL to the report.844667 wrote:
I have a relationship with a column defined as a Navigation to another report. "Is invited" all the filters are defined, and it does not, except for the total line - he does not appear. According to me, when I click on the column, accessing the view or table rather than the opinion of Pivot, which totals are seen.How can I configure the Pivot display as default view of the report? I don't see other parameters in the Format box of the column where I put the URL to the report.
Yes, you are right. The default destination view is made up mode. So here are your options (since you describe your situation in detail).
I. Si you have only the crosstab in your report, and then set your compound in page view to display the PivotTable. This way you will show your totals.
OR
II. If you have other views in your report, and then build a view selector and put all points of view. Make the PivotTable view the default view for the view selector.
-
How to view the report by using the style of calendar in obiee
Hello
Can someone tell me how to view the report as the calendar?
When I choose chrystelle, it displays 31 days. 7 column, from Sunday to Saturday, and each cell displays the detailed information, such as sales from today!
Thank you!Hello
Please foloww the below blog...
http://bischool.WordPress.com/2010/10/22/calendar-view-in-OBIEE-and-applications/
Thank you
Vincent
Maybe you are looking for
-
DV6-3034sl: remove the hard drive
I need to remove the hard drive in order to retrieve the data in it. I removed the four screws but the coverage does not move, I would avoid breaking the plastic eventually. Thanks in advance for any help
-
Where is the link for Windows Installer cleanup?
It seems that this link has been deleted.
-
Receive the error code 646 with KB978382, KB969559 updates
I hope that someone to teach me how to fix this microsoft office error code 646 excel 2007 KB978382 and also microsoft office system 2007 KB969559.I hope that I have fix soon... Thank you... * Title *.to solve this microsoft office code 646 error exc
-
How to pass first elements 7 adobe reader Windows XP C: D: disk program
I installed the program Adobe Premier elements 7 on my C: drive and he left me a not found extra space. How can I tranfer (move) on my D: drive without having to uninstall again!
-
Computer crashes when I open Windows Live Mail
I use Windows live mail for quite awhile with no problems. Since yesterday, whenever I opened my mail, my computer just freezes. I can't restart. I have to make a physical break down. The only thing I did yesterday was remove my files temporary in