The scanner of HP PSC 1215 does not work on windows 7. What should I do?

Similar Questions

• The scanner on my Epson SX525WD does not work on my new Acer's Aspire5742

  The scanner on my Epson SX525WD won't work on my new Acer's Aspire5742.I print of the Acer using the cable network and printer. I know that the scanner is good because I can scan of my 'old' Dell laptop using the printer cable. When I try to open Epson Scan on the Acer, it tells me that the scanner has stopped working. I uninstalled and reinstalled, tried different USB ports, running in XP mode (my Acer is Windows 7), but it does not scan. Can you help me?

  You have installed the drivers scanner? The Epson SX525WD printer has separate drivers for the scanner, you can download them here and then install them:
  http://www.Epson.co.UK/store/printers-and-all-in-ones/Epson-Stylus-SX525WD/drivers-support

  To see if you have Windows 7 32-bit or 64-bit:

  1. Open system by clicking the Start button, right-click computer, and then clicking Properties.
  2. Under system, you can view the type of system, it will say 32 or 64 bits.

  How to install a Scanner:
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  Working with the scanner and Camera Installation Wizard:
  http://Windows.Microsoft.com/en-us/Windows7/working-with-the-scanner-and-Camera-Installation-Wizard

  Setting up a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Try the printer Troubleshooter

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

• HP PSC 1315 does not work on windows 7

  I recently got a new PC with windows 7... I downloaded the driver for my printer (HP PSC 1315) of the HP site, but my PC does not answer with my printer.

  In the HP Solution Center it recognises my printer and shows that it is plugged in and on, but in "Devices and printers" represents a yellow mark at the printer.

  I tried everything, uninstall and re-setup, manual of rights even tried admin identify processes.

  Hello

  Please pass below for the info

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20PSC%201315%20All-in-one%20Printer&v=HP&UID=Q5765AABA&pf=0&PI=0&s=HP%20PSC%201315&OS=64-bit please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• The Ezcosmos program is older and does not work in Windows 7

  It works under DOS programs maybe it's 1995.

  And does not work in Windows7

  and the company has not updated this software since the last editin

  If you have the 32-bit version of Windows 7, you might be able to run it in compatibility mode.  If you have the 64-bit version, you would need something like XP Mode.  XP mode requires you to have the Professional, Enterprise, or Ultimate version.  You can use the Anytime Upgrade If you are not one of these.  Graphics mode XP are not suitable for fast action games, but I get 1360 x 760 with 16 bit color, when I enlarge the window XP Mode.  It's good enough for most applications.

  Good luck.

• After the use of commercial software, Netflix does not work in Windows Media Center.

  original title: a SOFTWARE UTILITY NOW NETFLIX in WMC ON VISTA PREMIUM 64 BIT DON'T WORK. ANY CONNECTION?

  WINDOWS MEDIA CENTER DOES NOT NETFLIX. INTERNET CONNECTION WORKS AND I AM A MEMBER AND WAS SIGNED IN. NETFLIX CHARGE UP AND I GET TO PICK THE MOVIE AND PRESS PLAY. YESTERDAY, 29/05/11 WMC GAVE ME A CANNOT PLAY, UNAVAILABLE TRY AGAIN LATER ERROR MESSAGE. TODAY, WHEN I TRIED IT AGAIN BEGINS TO CHARGE UP, I SEE THE CIRCLE OF ROTATION THEN THE SCREEN BECOMES BLACK AND REMAINED BLACK UNTIL I TOUCHED THE BACK ARROW (BUTTON). ALSO I DO NOT KNOW IF IT IS RELEVANT, BUT ON 27/05/11 I DOWNLOADED GLARY UTILITY SOFTWARE AND I USED IT, SO I DON'T KNOW IF I DELETED SOMETHING I SHOULDN'T HAVE OR UNCHECK SOMETHING WHICH IS SUPPOSED TO BE CLICKED, OR OFF A PROGRAM THAN WINDOWS MEDIA CENTER NEEDED TO RUN CORRECTLY. I HAVE NO IDEA. NEED HELP. ANY IDEA IS APPRECIATED. Thank you!!! FOR THE RECORD, I HAVE NEVER HAD PROBLEM WITH NETFLIX IN WMC BEFORE, IS THAT SUNDAY LAST.

  Hi liitkjay,

  There could be many causes for the issue. First of all, you can read the following article and try the steps to solve the problem:

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  If you're still having problems, you can uninstall the utility software and check.

  You can view the following link to uninstall a program:

  Uninstall or change a program

  Hope this information is useful.

• Download CC for the trial of the Ps does not open but window flashing, what should I do?

  When I click to open the file .exe creative cloud, the window that I'm (folders, browser, etc.) will Flash several times, but the application does not open.  Looks like there is a crash, but no information as to why, or what I can do differently!

  I use a Windows 7 Professional with Service Pack 1.  I downloaded Chrome and IE with the same results.  Firefox only opens even adobe.com, https://creative.adobe.com/products/download/photoshop, or something similar Web sites.

  Sgoddard475 do you get specific error messages when opening the creative Cloud Desktop application.  Please, see install and update the apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for more details on how to install the Adobe Creative applications provided with your membership.

• printers HP psc 1315 does not work with windows 7

  BOTTOM of my son recently gave me an Acer computer

  PROBLEM I can't get my printer to work with this computer... I changed the default printer (HP Laser Jet P2050 Series PCL 6) at the mine and get a troubleshooting message... have also a red light flashing next to change cartridge and one beside copies.

  Hello

  ·         What happens when you try to print?

  ·         What is the code or an exact error message you get?

  ·         What operating system is installed on the computer?

  Method 1:

  Run the fixit provided in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  I suggest that you install the latest driver for the printer and check if that helps:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=374568

  Method 3:

  You can also uninstall the printer and then install and as a default and check if it solves the problem:

  Add or remove a printer

  Change your default printer

  Method 4:

  You can also check out the link below, because it addresses similar issues:

  http://h30434.www3.HP.com/T5/other-printing-questions/sudden-print-cartridge-error-for-PSC-1315-unsolvable/TD-p/277223

• I bought a model of joystick ENTER E - GPV, but it does not work in windows 7. Should what drivers I install to make it work?

  Please tell me any driver so that it works on Windows 7 and

  Hello

  I suggest you to check out the link and that this game pad is not displayed as compatible with Windows 7.

  http://www.Enter-multimedia.com/gamepad_single_vibration.html

  I suggest you to install the drivers in Windows Vista compatibility mode.

  Reference:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I suggest you check the link for additional assistance:

  http://www.Enter-multimedia.com/support.html

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• How can I get rid of a popup telling me I have a virus Zeus.  It locks my screen and try to "erase the history and data, etc." does not work.

  I need help with a popup that locks the screen of my iPadAir2.  Go to the setting and compensation history/data does not work.

  If you have deleted the historical data and Safari Web site, and nothing is resolved, the problem is on the wireless router. Check your router wireless for possible violations.

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• I just bought a new mouse at the Apple store today.  It does not work.  I have a logitech keyboard, not an Apple (they are too small).  My previous mouse worked.  Why not another?

  I wrote this message 4 times now!  Here it is:

  I have a MacbookPro.  I just bought a new mouse today from the Apple Store, because the little door on the back of my old we kept popping off the power.  Now a new does not work with my keyboard and the Apple screen.  I use a Logitech keyboard, with which I have never had problems using the old mouse.  The batteries seem to work.  What is the problem?

  What is a wired mouse or a wireless mouse?

• try changing the settings of iTunes store password does not work: System does not recognize the apple id account password

  Hello.

  When I try to change the settings of iTunes store password does not work: System doent recognize the apple ID account password

  Sign out and then sign in again the apple between the device and what not ID recognize the password very well, but when Im going to change all password parameters, system ask me the password again, I write and ask again... n times.

  I tested in different devices, iphone and ipad, with two different accounts and beta of ios 9.2 and 9.2.1. Still the same error.

  The problem is that when I try to download a free app from app store ask me the password and does not work so I can't download any new script.

  Thanks for your help.

  Best regards.

  Hello bdepaco,

  Thank you for using communities of Apple Support.

  I see that you have any questions, change your password ID Apple via iTunes. Have you tried to change your Apple ID account page? Take a look at the following article for the steps:

  Change your Apple ID password

  Once you have changed your Apple ID password, it presents a few additional measures to be taken.

  What to do when you have changed your Apple ID email address or password

  Best regards.