The search in a table a value then delete this array element

Hello.

I have an array of VO (id, link, title, url...) I want to get an ID of this array element and remove the element with the corresponding id. Any thoughts on how I would go to this topic?

Thanks in advance!

Ryan

I don't know much on your and this probably isn't the most elegant solution, but you can do something like:

for (var i: Number = 0; i<>

{

If (myVOArray [i] ["id"] is "someId")

{

myVOArray.splice (i, 1);

}

Tags: Flex

Similar Questions

Error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. Unplug all printers on this port, and then delete this port.

Original title: 'RedMon Redirection Port Monitor': pray, harming this pose to my pc?

I recently tried to download a free pdf creator, after which I noticed "RedMon Redirection Port Monitor in my program Menu. I'm exhausted trying to delete it, and yet I get this response: "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port. I need help to deal with this, as I suspect that the Redmon may pose harm to my pc

Hello Apollo,

Welcome to the Microsoft community where you can find all the answers related to windows.

According to the description, it seems that you are having problems with uninstall Redmon as it gives the error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port.

Perform the steps in the link to uninstall Redmon.

http://pages.cs.wisc.edu/~ghost/RedMon/en/redmon19.htm#39

Answer to us if you are having problems with Redmon or any other issue of Windows, and I'd be happy to help you.

Good day!

Hope this information helps.

The search in a table 2d-coordinates for the point of click

I'm doing a VI that creates a layer of 2d points on an image imported (as pictured). These points are generated by a Subvi, which simply draws points over and over again (based on the 3 selections of initial angle). All the coordinates of the points are stored in a data feed that is sent to a registry change for other future functions. Each coordinate corresponds to an electrode, labeled 0-255, goes into the lines first (although that could change, but I guess it would be easy to change). Labels are created through 2 loops (as seen in diagram 1).

I would now like to click on a particular point and put it out in a different color, but also an indicator show me what electrode I clicked. I seem to be at a loss on how to do it! I need explore a table 2d-2 groups of the element, where she looks for the line first, then the corresponding column (or vice versa, it is not serious, but just for ease of understanding, let's say she is looking X first, where the columns first) and compare them to 2 elements (the mouse click coordinates).

Here's what I've done so far. I need to search for the function in the following way; If find X, look no further columns and select that particular column where the X was found and begins to look for the values Y and and then stops when the value of Y is. Once the two values are found, take these out of the loops and throw them in a cluster and the function of drawing lots.

Thank you!

p.s. in case anyone is wondering why I have the function "in the range" in there, it's so that the user does not have to be exact pixel this allows the user to click within 2 pixels of the coordinate of the point.

Hi Daniel!

What do you think of this approach?

We subtract just the mouse coordinates in the coordinated range 2D (Array stores the coordinates of the points on the image), the absolute value and look for the minimum. X and y the selected point index is returned in minutes or the index. You can replicate the fuction "in range" by ensuring min value is not too high.

With regard to:

Andrew Valko

NOR Hungary

After first load FF and I typed something in the search box, I type several words, then clears the box and I have to re-enter my search words. Why?

Loading Firefox 8 I frequently get right into the search box to enter something I want. Usually I can type two or three words, then remove it from the box. I then re - type my search words. It seems that after the first load there is a delay the program refreshes then so what I typed in the search box, I have to enter a second time.

Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode

[ADF, JDev12.1.3] Mastering the form with detail tables: questions about Insertion/deletion, commit / rollback, primary key, handling,...

Hallo,
I have a panelTabbed with 4 tabs. In the 1st tab, there is a master form while each of the other tabs, there is a secondary table. Each tab "reads" vo.
Please see here http://digilander.libero.it/flattit82/OTN_FILES/VoInTabs.png
I created the graphichs/layout and now it's time to take care of the management of the transaction.
In the master tab / form
1)
Here, I would put a button to remove the master record.
When I delete a record in the primary table an automatism in the database (MS SQL Server) will automatically delete any registration which are linked to it in the detail tables.
Could the automated system as this causes problems?
In the Details tabs / tables
2)
I would put a button in each row to delete the line delivering. Can I just drag-and - drop, like button, af line: table the operation "Delete" of the VO istance detail used to create the af: table?
3)
If Yes, by clicking on the button performs the default delete operation. But if need to perform some actions before you run the deletion (or, in General, any other operation), how can I do?
4)
To create a folder that I use Create or CreateInsert? And what are the differences between them?
5)
When I create a new record I need set the value of a field of the VO on which is based the af: table. He filed, let's call it RowDetNumber, is not displayed in the af: table, because it doesn't have be filled in by the user. Mut value is calculated and set "secretly" before posting the new line to the database table. In particular, its value must be calculated as
Select max (RowDetNumber) + 1
of table_on_which_VO_is_based
where some_conditions_on_fields_of_the_same_VO

For example
The VO selects all of the records that have FkId =: value. If value = 3, VO selection records:
ID RowDetNumber OtherFields FkId
1   3     1             ...
2   3     2             ...
3   3     3             ...
4   3     4             ...
The new record must be RowDetNumber = 5.
I would like to know how permorm this.
In general
6)
If the database tables have 1 or more triggers I have to take care of something?
7)
On the book "development of Web Applications with Oracle ADF Essentials - Sten E. Vesterli", I have read it could be problems when you use tables of database non-Oracle with auto-increment fields.
The advice of author uncheck the 'Required' box in the model.
All tables in my database have a primary keys that are auto-increment... so I uncheck the "mandatory"?
8)
In general how do I set these fields? I have to put in OT, VO or both?
Thank you
Federico

Hello

(1) you will need to re - question child iterators so that they do not look stale data

(2) Yes. Ensure that the table is PPRed after deleting the line (should happen automatically if ChangeEventPolicy on iterator is set to ppr)

(3) double click on the button and it creates a bean managed for you. It allows you to check a box to generate the code he would run to remove the line. Everything you put in front of the generated code is your code before

(4) in the case of tables, use createInsert as it adds the new line to the rowset (transaction)

(5) suggest to do this use a database trigger and the data attribute value DBSequence VO type

(6) do not 'drop table' issue in SQL (sorry, couldn't resist ;-))

(7) If you follow the advice of the author, Yes. What it does, I have it does not throw an exception if a value is missing in the validation of the line

(8) usually you set whatever it is at the level of the OS and put only things on VO if you want to override the default value for a specific behavior

Frank

Try to delete a file, but I get a message saying that the file is not found. Need to delete this file because it is screwing my backup system. error "error 0 x 80070091.

I can see the file in the my document directory, but when I try to remove it I get a message saying that it cannot find. Sometimes, I get error 0 x 80070091. No idea how to solve this problem?

I finally got rid of it by reaching the file then delete the archived file. When archiving, you must select the option (delete files after archiving).

PL/SQL to return at the beginning of a table/reset value
Hello

My last task is to have a set of view 1 page of data every n seconds, for example data on each database. The table contains a PK that defines the order. Now if I have 15 databases (unknown number) how can I reset it to 1 when I arrived at the end? I also reset the element name of DB. That's what I try with a PL/SQL procedure (before the regions):
```
begin
IF (select 1 from monitor_status 
where DB_MONITOR_PK = :P2_HIDDEN_DB_NM) = 0 then
:P2_HIDDEN_DB_NM := 1;
--select db_name into :P2_DBNAME from monitor_status
-- where DB_MONITOR_PK = 1;
end if;
end;
```
The idea is if there is no line with the PK then go back to the first, but he complains to select it in the IF statement :(

Mike
GERD wrote:
Hello

My last task is to have a set of view 1 page of data every n seconds, for example data on each database. The table contains a PK that defines the order. Now if I have 15 databases (unknown number) how can I reset it to 1 when I arrived at the end? I also reset the element name of DB. That's what I try with a PL/SQL procedure (before the regions):
```
begin
IF (select 1 from monitor_status
where DB_MONITOR_PK = :P2_HIDDEN_DB_NM) = 0 then
:P2_HIDDEN_DB_NM := 1;
--select db_name into :P2_DBNAME from monitor_status
-- where DB_MONITOR_PK = 1;
end if;
end;
```
The idea is if there is no line with the PK then go back to the first, but he complains to select it in the IF statement :(
Yes, it is not valid in PL/SQL.

Assuming that P2_HIDDEN_DB_NM is is incremented (from observation "when I came to the end"), where and when is it? Cannot be reset it?

Use an exception no_data_found handler:
```
begin

  select
      :p2_hidden_db_nm
  into
      :p2_hidden_db_nm
  from
      monitor_status
  where
      db_monitor_PK = :p2_hidden_db_nm;

exception

  when no_data_found
  then
    :p2_hidden_db_nm := 1;

    select
        db_name
    into
        :p2_dbname
    from
        monitor_status
    where
        db_monitor_pk = :p2_hidden_db_nm;

end;
```

Software exists for the creation of a 'virtual' network card and going to all the traffic on the local network through a proxy server, then by this adapter?

I can access net through LAN and my college requires a proxy for all access to the internet. If you want to use the internet, it is impossible to do not use a proxy. This is a problem for many programs that do not seem to allow you to enter the proxy settings.

any software is to create a 'virtual' network adapter that will pass all traffic network (or any protocol x traffic) through the proxy?

So I have do not need to enter the proxy anywhere... and I have normal internet access.
What I saw is possible with OpenVPN, but it is a vpn service that I need .i just want to use the feature. In OpenVPN I just enter my proxy server in its framework and OpenVPN to connect to a VPN service and routes all traffic to the FAUCET adapter after which I don't need to set the proxy address anywhere... so my idea is how can I use only the last part that is routing all my LAN traffic to a virtual card.

Support the LAN---> proxy---> virtual adapter--->, then software I access the net

That's what I like to do...

Although I am facing this problem on Windows 7, solutions for all operating systems are welcome.

P.S: Proxifier is not my solution to not offer something like this.

Hi Sapan,
Thanks for posting in the Microsoft community!
You can use your favorite search engine and look for the software that meets your requirements.

WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

Change the search engine to the url of the specific Web site

I have the problem by changing the url of search engine for the url address bar and the search engine plugin. My version of Firefox is 35.

Specifically, I want to use Google.co.uk for each search, but it goes to a country different from Google.

I tried to change the subject: config-> keyword. URL: value: "https://www.google.co.uk/#q=", but it does not.

I have tryied changing the search engine plugin, which does not work either.

You need to install a search engine for your favorite country, then select this search engine in "Options/Preferences > Search" as the default search engine.

The Master Table column updated based on the sum of column Table detail

With the help of JDev 11.1.1.6.
I have a master-detail table based on a link to BC.
The main table has a column that displays an InputText or an OutputText, based on the value in another column.
If the InputText is displayed, the user can enter a value and the database will be updated with that value.
If the OutputText is displayed, it must be a sum of a column in the secondary table. Also, this value will be written in the database.
Question:
How can I fill the OutputText in the main table with the sum of the values in a column in the secondary table?
The detail table column is a manually entered InputText field.
Thank you.

Create a spike in the main table and write in its expression as follows - DetailVoAccessorName.sum ("ColumnName");

This will calculate the sum of column table detail and then you can set the value of the transient attribute to attribute DB on backup operation

Ashish

PHP convert the variable date of table format

I can not explain this without showing all the code...

I have a script which basically scrape information off the myspace site and updates the information in a table. I then had the script put this in tabular form. The problem that I'm hoping to get help, I would like to change the date format, and I don't know how I can do this since it is Setup how to loop through the table. If anyone can show me a better way to do it without a loop or a way to convert the date, I'd be very happy.

18/06/2009 22:00-Thursday, June 18, 2009 22:00

<? PHP

include('simplehtmldom/simple_html_dom.php');

$myspace_url = "url I'm scraping."

ini_set ('user_agent', ' scratch/2.5');

$html = file_get_html ($myspace_url);

$i = 0;

foreach ($html-> find ('input [type = "hidden"]') as $k = > $v) {}

If ($v-> name == "calEvtLocation") {}

$shows [$i] ['location'] is $v-> value;.

}

If ($v-> name == "calEvtCity") {}

$shows [$i] ['city'] is $v-> value;.

}

If ($v-> name == "calEvtState") {}

$shows [$i] ['State'] is $v-> value;.

}

If ($v-> name == "calEvtDateTime") {}

$shows [$i] ['date'] is $v-> value;.

$i++;

}

? >

< table border = "0" align = "center" cellpadding = "8" cellspacing = "0" >

< b >

< e style = "text-align: left;" do-size: 12px; "> < /th > venue

< e style = "text-align: left;" do-size: 12px; ' > city < /th >

< e style = "text-align: left;" do-size: 12px; "> Status < /th >

< e style = "text-align: left;" do-size: 12px; "> date/time < /th >

< /tr >

<? PHP

foreach ($shows as $show)

{

echo "< tr >";

foreach ($show as $item)

{

echo "< td > < table > $item";

}

echo "< /tr >";

}

? >

< /table >

Move the $i ++ should not have any effect on the way in which items are displayed thereafter.

How I would deal with the table is like this:

";
}
?>

How can I get the search bar on the home page of Firefox to stop mirroring of what is in the search toolbar?
This seems to be something new, but I usually use the built in the toolbar to search at the top right of my Firefox window to search eBay and I usually go to the Firefox default Home/Start for searches on Google page. Now, it seems that whenever I try to search from the home/start page, I get the results of any search engine is specified in the top search bar. So if toolbar is set to 'eBay' and I search something on the homepage, only eBay results appear.
I don't want to do. I want that the Google search home page every time, no matter what is on my search toolbar. It's really annoying to have to go to the search bar engine resume Google and then my search. I often open new tabs quickly find something relevant to what I'm working on because it requires less effort to hit Ctrl + T to open a new tab that is already on the cover with my cursor in the search field, than using the toolbar where I have to take my hands on the keyboard to use the mouse. How can I fix it. This "improvement" sucks.
I forgot an obvious solution to this problem. I just changed my homepage of "www.google.com" rather than use the default Firefox homepage. In hindsight, it makes little sense to use the default Firefox homepage as an intermediary to Google anyway.

Update Firefox 16 prevents by typing in the search box
I had Firefox 15.1.1 on my netbook and found that when I click on the search bar, the cursor would move toward the front of the word Google and not allow me to type anything in. Reinstall from scratch has not helped. I put it down to a conflict with something else installed.
On my PC the research was working fine until I updated to 14.1.1 16.1.1 and the same thing happened as with my netbook, the cursor would go before the word Google and I couldn't get anything by typing.
I did a restore of the system on my PC and got 14.1.1 rear and the search bar worked. So I then uninstalled Firefox on my netbook and reinstalled with 14.1.1 and it works well.
Either way, while I had 15.1.1 on my netbook, I used a work around by sliding a word in the search bar, google would find it, and then I was able to use the search bar until I closed Firefox.
I've done many research, but could not find a solution to the problem. Create a new profile, such as recommended, did not help. When I uninstalled 15.1.1 off the netbook and reinstalled with 14.1.1 the latter uses the profile without any problem.
I attributed the problem to my configuration on the netbook, but when the problem appeared also on my PC so I can tell it seems to be a bug in 15.1.1 and it had not been resolved in 16.1.1
Hi madperson,.
Many apologies for don't get back to you as soon as possible. Everything now works well using the latest version, after that I decided to uninstall Firefox, delete the Mozilla folder and start again.
My current Mozilla file is about 20 MB while the old record was 44MB. I can only assume he had a lot of unnecessary information in this folder and that something created the problem I posted.
Thank you for your response.

Strange message appears when searching for the search bar
This happens whenever I search from the search bar...
I type a few words into the search bar and press ENTER. Then a small dialog box (subtitled "Application Javascript") appears, displaying a short message: shows "research #2", as the attached picture.»
I have to press the OK button in the dialog box to close it. The research begins to move forward.
What does this message mean short? How can I get rid of him?
Nothing is changed in the "manage search engine list.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
Makes no changes on the start safe mode window.
https://support.Mozilla.com/kb/safe+mode
If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.
Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:
Help > restart with disabled modules
Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)
https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

Windows 7 continues the search for updates
Recently, I have restored my laptop to factory settings, and after you install the service pack 1 update, this does not block the search for updates. I tried everything on this site but without success. Help, please. Thank you.
The installation of the plant is the worst possible Windows, that no tech fan would go because of the bloatware and installation utility factory duplicate that interfere with better integrated in the operating system versions. Corruption as it is so just wait until you make a clean reinstall Windows 7 .
If you want to try to wrestle with the factory install, so first thing I "d to recover some lost performance is Clean Up Factory Bloatware. " It also checks and fix the integrity of the installation itself, which is not only limited but damaged by bloatware.
Then, if the problem run the troubleshooting Windows Update - Microsoft Windows Help tool
Then, try to Reset Windows Update components.
Finally, as a last resort, run the System Update tool .
Let us know how it goes and if there are any questions or problems.

The search in a table a value then delete this array element

Similar Questions

Maybe you are looking for