Cannot allocate 0.002 MB memory... I have 32 GB of RAM

Similar Questions

• Cannot allocate 0.002 MB memory

  I have an iMac 3.4GH 16 GB of ram. I don't understand why would I suddenly get this message. I use Mavericks 10.9. I use after effects CC the last version.

  

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• After cc 12 and Maveriks: cannot allocate 0.003 MB memory.

  Hello, I have problem with after cc 12 and Maveriks.

  The problem is:

  (76: 0)

  Cannot allocate 0.003 MB of memory. Decrease memory for rendering of this framework requirements, or install more RAM. (12803 / text engine data). For more information, see www.adobe.com/go/learn_ae_mem

  You know the problem?

  waiting for response.

  Thank you

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• Cannot allocate 0.000 MB memory

  Hello

  I'm running after effects CC on a Macbook Pro, with 16 GB of Ram and 70 GB of free space running OS Maverick.

  After I had the program open for about 10 to 30 minutes, I get a dialog that says:

  "Impossible to allocate 0.000 MB memory, decrease memory for rendering of this framework requirements, or install more RAM... »

  I had no such problem with CS6... Dialogue essentially paralyzes the program, because just hit OK brings up another identical message and does not allow to fix or change anything. I have to force quit... It tends to be a grace period of 10 minutes or I can work before she starts to happen again.

  Is this a bug, is there a trick in this stop error message? The program seems to perform very well until this warning appears.

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• Cannot allocate 0.000 MB of memory.

  I keep getting this message while he was working on a project in AE.

  "Cannot allocate 0.000 MB of memory. Decrease memory for rendering of this framework requirements, or install more RAM. (12803 3D camera data / standard). For more information, see www.adobe.com/go/learn_ae_mem (5027: 3)"

  I deleted the cache in AE and premiere. I left first and the TEA so that EI is the only thing running. I even reset the pram Mac, but we are still receiving this error.

  I am running Adobe after effects CC 2015.3 (13.8).

  OS X Version of Yosemite 10.10.5

  iMac 27 inches, end of 2013)

  Treat 3.5 GHz Intel Core i7

  16 GB 1600 MHZ DDR3 memory

  Macintosh HD boot drive

  Graphics NVIDIA GeFroce GTX M 780, 4096 MB

  Please let me know if you need more details, and I'll be happy to provide.

  Thank you for your time and help in advance. Any suggestions are welcome.

  Looking forward to you soon.

  George

  Hello

  You may have a few third-party plugins that requires an update. Please check below the places and remove them to confirm.

  1 MAC HD or startup drive > library > Application Support > Adobe > commune > Plugins > 7.0 > MediaCore.

  2 applications > After Effects > Plugins.

  Second, there are 5 default folders. So, remove everything it to check the cause.

  

  Vinay

• Fehler beim co-chair der speaker: 12 (cannot allocate memory)

  Hello

  We have a big problem with one of our virtual machines.

  We use Symantec BackupExec 2014 and this seems to cause huge problems with the VMDK files.

  The thing is, this special VM has thausands of disk files vmdk divided into blocks of 4MB.

  Makes this virtual machine is so slow, that we were unable to work with her.

  So, what you do everything first? right... try to turn...

  But this time: ERROR. Nothing happens. The machine does not start.

  I would try to take a look at the vm-folder on the volume of SAN. But even here, nothing happens. just of hundreds of «...» »

  So I tried to download the whole file. Here, I recognized on the thausands of vmdk files. After that, I cancelled the copy and began to consolidate the disk files.

  After 4 and a half hours (every 10 minutes he took a step forward 1%), the system has halted the process with 12 error (cannot allocate memory)

  I tried to find a solution on the web. But nothing about this kind of problem again.

  does anyone have a tip? Or better, a solution that would be the next us?

  Thanks in advance

  Hackert

  Der Versuch die Maschine zu clones ist eine gute idea zweifelsfrei. Klappt ist alles ok Wenn wenn nicht - durch die grosse Anzahl der Snapshots - muss die Kommandzeile und ein wenig Handarbeit hold. Es gibt Kommandozeilen VMware-Tools die yesterday used werden können. DAS sind vmkfstools (as ESXi und/oder vmware-vdiskmanager as VMware Workstation.) The VMware KB article http://kb.vmware.com/kb/1004545 shows wie das in meherern Entert gemacht werden kann, wenn die Anzahl der zu gross wird und nicht mehr works etc. clones Snapshots. Important ist dabei eine der Daten zu haben current safety, falls was dabei schiefgeht.

  André

• Cannot power on VM - cannot allocate memory

  I started to see this random question on VM on our companys (3 guests) ESX cluster. I had to stop working on this cluster until we can solve the problem

  I encountered a similar problem before that related to snapshots, but this problem occurs on machines that have ever been instant and in the past, had been working perfectly.

  An excerpt from the log file of the VMware virtual machine:

  2013 07-09 T 00: 41:32.918Z | Worker #0 | I120: DRIVE: OPEN scsi0:0 [' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' persistent R]

  2013 07-09 T 00: 41:32.918Z | Worker #1 | [I120: DRIVE: OPEN scsi0:1 ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' persistent R]

  2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: FileIOErrno2Result: unexpected errno = 12, cannot allocate memory

  2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: AIOGNRC: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (c0002) (0 x 2013).

  2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: OBJLIB-FILEBE: FileBEOpen: unable to open ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (786435).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot open (cannot allocate memory): ObjLib_Open failed. Type 3

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LINK: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-STRING: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LIB: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' with flags 0xa cannot allocate memory (786441).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DRIVE: cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': failed to allocate memory (786441).

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': open with success (10) size = 53687091200, hd = 3565896. Type 3

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-DSCPTR: open [0]: 'JD-5-Manager - flat hard' (0xa)

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: Msg_Post: error

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.literal] cannot allocate memory

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LINK: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (0xa): vmfs, 104857600 sectors / 50 GB.

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' or one of the snapshot disks it depends on.

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: ----------------------------------------

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LIB: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (flags 0xa, type vmfs).

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISK: disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' a UUID 60 00 c2 9 c cf e7 7A d0 - c9 a4 f2 29 3f 42 e7 e9'

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DRIVE: OPEN "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" Geo (6527/255/63) BIOS Geo (0/0/0)

  2013 07-09 T 00: 41:32.933Z | VMX | I120: DISC: discs of opening had 16 ms.

  2013 07-09 T 00: 41:32.933Z | VMX | I120: Module DiskEarly market failed.

  2013 07-09 T 00: 41:32.933Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2013 07-09 T 00: 41:32.933Z | VMX | I120: scsi0:0: numIOs = 0 numMergedIOs = 0 numSplitIOs = 0 (0.0%)

  2013 07-09 T 00: 41:32.933Z | VMX | I120: Closing of disc scsi0:0

  2013 07-09 T 00: 41:32.933Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': closed.

  2013 07-09 T 00: 41:32.937Z | VMX | I120: WORKER: asyncOps = 3 maxActiveOps = 2 maxPending = 0 maxCompleted = 2

  And the vmdk disk file:

  # Disk DescriptorFile

  version = 1

  Encoding = 'UTF-8 '.

  CID = 4ed52c7e

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "vmfs".

  # Description of the measure

  RW 629145600 VMFS "JD-5-manager_1 - flat hard."

  # The database disk

  #DDB

  DDB. Deletable = 'true '.

  ddb.virtualHWVersion = '8 '.

  ddb.longContentID = "8264138edeb9f6fb2afaf3be4ed52c7e".

  DDB. UUID = "60 00 C2 98 c9 03 10 f9 - 19 1A 34 a1 ba e3 1 c c3"

  DDB. Geometry.Cylinders = "39162.

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "63".

  ddb.thinProvisioned = '1 '.

  ddb.adapterType = "free".

  As you can see that the parentCID is the correct setting for a vmdk with no snapshots.

  Tips to solve this problem?

  Thank you kindly.

  After asking, I checked the vmkwarning log and found the following:

  / var/log # tail vmkwarning.log

  (2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

  (2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

  (2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

  (2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

  (2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend

  (2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP

  (2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend

  (2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP

  (2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

  (2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

  Which leads me to the following VMware KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004424

  Using PowerCLI, I checked the total size of all the VMDK files on a member of the cluster with the following command:

  PowerCLI > Get-hard drive - Datastore |-ExpandProperty CapacityGB select | measure - sum - ave - max - min

  County: 78

  Average: 197.730180789263

  Sum: 15422.9541015625

  Maximum: 544.49609375

  Minimum: 50

  Property:

  According to this article, the maximum size supported all open VMDK files was only 8 TB, so I was much higher than that, so fall on issues.

  I adjusted the VMFS3. MaxHeapSizeMB at the maxmum 256 MB to compensate and that solved this problem.

• db_load error: cannot allocate memory

  Hello

  When I try to import a dump file, I always get this error:

  
  

  db_load: BDB2055 lock table is out of available lock entries

  db_load: cannot allocate memory

  I performed "db_load f outdb/outdb2 - h env xass.db".

  
  

  and I put max locks:

  dbenv-> set_lk_max_locks (dbenv, 1000);

  but it does not work.

  
  

  What should I do to avoid this problem?

  Thank you for your help in advance

  
  

  
  

  Mark

  
  

  
  

  Update:

  
  

  I did some tests, and I found that if I increase the number of locks by 'set_lk_max_locks' in the DB_CONFIG file, db_load operation will be a success.

  The point is that the larger db file may need a very high value of locks, then why "db_load" does not release the locks during the ongoing procedure? Is this a bug for the bdb?

  because I can not increase the infinite number of locks!

  If this is not the case, How can I cause "db_load" release of transaction locks?

  Is someone can help me?

  Mark

  Hi Mark,

  If you import a dump file into an existing, open environment with flags of (can be several) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true, you may encounter the error on "lock table is out of available lock entries" when the dump file is very large. Db_load process will not release the locks because he have to provent other processes to access the database under construction to ensure the consistency of the data in the transactional environment.

  The general average to load a database from a dump file is to specify an empty directory as the base directory. Hereby, the database will be created in a private non transactional environment, and you can copy the database in your environment running once completed the process of db_load.

  Kind regards

  Winter, Oracle Berkeley DB.

• This error: "java.io.IOException: error = 12, cannot allocate memory.

  I tried to run a simple workflow in vCenter Orchestrator (VCO) which accesses the command prompt by using this script:

  var myCommand = new Command ("ls");
  myCommand.execute (true);
  System.log (myCommand.Result);

  We use VAPP VCO and we continue this error:

  "Wrapped java.io.IOException: cannot run program 'ls': java.io.IOException: error = 12, cannot allocate memory (Workflow: Test2 / Scriptabletask (item0) #1)"

  Any suggestions? This script is copied and pasted directly from the VCO manuals, where our confusion.

  Have you tried to increase the memory of the virtual machine?

  I assume that you already have tried to restart the virtual machine without increasing the memory, just?

  Christophe.

• put db failed for "cannot allocate memory".

  Hi exports BDB.

  
  

  I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:

  (1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)

  (2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?

  (3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?

  (4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?

  (5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?

  BRS,

  Min

  Hi Min,

  The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.

  (1) the memory will be allocated heap if you have not defined a function alloc.

  (2) all databases in an environment share the same cache (16 m here).

  (3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.

  (4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:

  https://forums.Oracle.com/thread/2560134

  The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.

  To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.

  Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.

  This thread can help you on this:

  https://forums.Oracle.com/thread/2557981

  5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.

  Kind regards

  Winter, Oracle Berkeley DB

• AMT: cannot allocate memory - is there limit to the databases on a single box num

  Hello
  
  Specification of the server:
  Windows 2008 R2 x 64 with all updates applied
  
  Oracle 11.2.0.1 Standard Edition with Patch 16 applied (which corresponds to all the live database version)
  
  10 GB OF RAM
  
  I have a standby server that has all my databases to watch over him
  
  Recently, I added about 8 new databases on hold to take to 102 and since then I get an intermittent error of TNS. AMT-12531: TNS: cannot allocate memory
  
  I have scripts that loop in all databases one at a time, they start the standby database, apply the new recovery logs archived and close the database
  
  It worked perfectly for years but I started having problems after you have added a few other databases, it probably defective 1-3 times so it is inconsistent.
  
  With all databases only idling server use 6 GB out of the 10 GB RAM available so there is a lot of memory free
  
  If I withdraw half a dozen databases in the scripts, it starts working again.
  
  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages
  
  Server has been restarted several times and sometimes travel a couple of times before failing and sometimes will fail in the first inning thanks to
  
  Failures are normally towards the end of the script, IE. has applied the newspapers to 95 databases and fails when the 96th!
  
  I reorded the data bases in the script and it still fails at the end, not on a specific database
  
  I also added restarts listeners for scripts that made no difference
  
  I've now changed my scripts, then real windows service does not work for databases and the script makes a net start before applying the newspapers and a net stop eventually. She's now going through without a problem but I would go to the bottom of the issue and keep windows running services in the starting and stopping of their adds time for labour to apply the logs across all databases
  
  Thank you
  Robert

  Have you tried a note

  AMT-12531 on Windows 64-bit [ID 1384337.1]

  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages

  I don't think that you need several headphones if a listener is enough to support all of your databases running on a server.

• Help.  Error "cannot allocate memory".

  Hey all,.

  I tried a search first, and I tried google.  I have to look at a PC that has CS5 or CS5.5 tomorrow, it runs Windows 7 64 bit with 16 GB of Ram.

  The error given is:

  "Cannot allocate 0.000 MB of memory. Or decrease memory for rendering of the framework requirements

  or install more RAM. (Object 123803/U.Mem) »

  And I have no idea.

  I suspect, it might be in the way that there AE set up, but wont know until I see the machine.  Any suggestion is appreciated.

  See you soon

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• Cannot start the DSC Shared Memory

  I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.

  I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.

  Thank you!

  Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...

• Calc Dynamics Processor cannot allocate more than 350 the heap block of

  Dear users of Essbase,

  I am trying to implement some logic in order to get my calc done by dynamic calc and formula on members.

  My dynamic member calc with formula is not limited to offsetting the conditional statement to the role of alternative only, I see no problem.

  But in order to get the correct result, I include under condition ISMBR statement and restrict level 0 patch replacement on a sparse Member, I get this ' error Essbase (10127000): dynamic calc processor cannot allocate more than the blocks [350] from the jump. The parameter CalcLockBlock is too low or the size of data cache setting is too low. Increase the setting of the CalcLockBlock or the size of data cache setting and then try again '

  IF (@ISMBR (@RELATIVE("ALTERNATIVEROLLUP",0)))

  IF (@ISUDA ("SCENARIO", "XXX"))

  do something...

  ENDIF

  ENDIF

  I looked through this forum and tried to fix my problem in making changes on Essbase.cfg of DATACACHESIZE and DATAFILECACHESIZE values.

  I also checked in the settings of CALCLOCKBLOCK and the error message shows his tent to allocate more than the default value no. blocks that is 350 blocks in my tests.

  I have CALCLOCKBLOCK with HIGH as 4900, settings default than 350. Hope this is good enough.

  As it is on the dynamic calc and formula approach based on, would like to know how to face this question set.

  If you have encountered this problem would like to take suggestions. Thank you.

  Kind regards

  Praveen

  Of course, JM, it was my test script.

  I would like to change my script to be the best :-).

  And I could get rid of the Essbase error in improving more all hides and CALCLOCKBLOCK parameters.

  The operating current system cann't be changed to try chaning type of dimension and other changes required for the TBLAST property. It is one of the obligation that I work. Then try my best to correct and come out with the best solution.

  It is easy to build the new app with fresh demands to try to include new features to the existing system.

  Thanks a ton for your time and your suggestions.

• the essbase database access issue: Essbase cannot allocate enough blocks to perform the calculation

  Hello

  I have a problem with my report and smartView and I have this error:

  «Query execution error: error: internal error Essbase JAPI: [(1012700): dynamic calc processor cannot allocate more than the blocks [1982] CAs.]» The parameter CalcLockBlock is too low or the size of data cache setting is too low. Increase the setting of the CalcLockBlock or the size of data cache setting and then try again"

  
  

  Block size: 51648

  
  

  CalcLockBlockDefault: 10000

  CalcLockBlockDefault: 20000

  
  

  Thank you.
  

  Try DynamicCalcCache 199 M in cfg, recycle essbase services... and check

  See you soon!

  SH! going