The simultaneous program based on the different parameter values.

Similar Questions

• Several sprites using the same parameter value

  I'll ask the same question " 'contains' doubt in the hexadecimal color value?" but in a different way, because I realized that the solution is more simple than I thought, and the solutions will also. I have this problem:
  
  property pTargetSprite, pBlendValue
  
  on getPropertyDescriptionList me
  List = [:]
  
  addProp list, #pTargetSprite, [#comment: ' target Sprite: ',]
  [#format: #integer, #default: VOID]
  
  addProp list, #pBlendValue, [#comment: ' mixture value: ",]
  [#format: #integer, #default: 100]
  
  back list
  
  end
  
  
  on mouseDown me
  
  .blend Sprite (pTargetSprite) = pBlendValue
  
  end
  
  I would like to get SEVERAL sprites for 1 parameter, that is to say when the behavior dialog box appears and ask me the "target Sprite:", I entered... Let's say 1, 2, 3,... Regardless of the numbers I want. Therefore, the values of this sprites mix will change according to the mix input value. Right now is perfect, but of course work with only a sprite, but I want to be able to give this value of mixture for several sprites on the same setting.
  
  I guess it must be very simple, but I can't get the answer anywhere in my brain, nor my book Director, or in the forums.
  
  Thank you!!!
  
  

  Rob, Anders... Thank you very much!!! Now it works perfectly.

  spriteList property
  blendValue property

  on getPropertyDescriptionlist
  myPropList = [:]
  myPropList.addProp (#spriteList, [#comment: "enter the sprite channel \])
  (["the numbers to use, separated by commas:", #format: #string, #default: "1,2,3"]).<>
  myPropList.addProp (#blendValue, [#comment: "mixture value:",-])
  ([#format: #integer, #default: 100])
  return myPropList
  end

  on beginSprite me
  spriteList = stringToList (spriteList)
  end

  on stringToList (thisString)
  oldDelim = the itemDelimiter
  itemDelimiter = «»
  thisManyItems = thisString.item.count
  tempList =]
  Repeat with n = 1 to thisManyItems
  tempList.add (thisString.item [n])
  end repeat
  itemDelimiter = oldDelim
  return tempList
  end

  on mouseUp me
  thisMany = spriteList.count
  Repeat with n = 1 to thisMany
  .blend Sprite (value(spriteList[n])) = blendValue
  end repeat
  end

• Could not save the different string value to each element of the array

  I have a configuration of VI to read several channels Veristand project.  The entrance is a table 1 d of channels, (an element for each channel, I want to read).  The channels have different names, each of the elements in the chain must be different.  I am able to edit each item and run the VI, and it works fine.  However, if I save, close and reopen the VI, all elements show the same value (what happens to the value of the last element for which I defined a default value).  Is this behavior planned, or have I missed a configuration setting which would allow different string values?  Please notify.  Thank you.

  GSinMN

  Make sure that you select the table and not only one item when you right click-> set by default on the front panel.

• Get the workflow parameter value before the end of the SOAP client workflow execution

  I'm calling webservices SOAP Orchestrator of my request to run a workflow. I want to get a parameter/attribute value before execution of the workflow.

  Brief:

  I have a XYZ workflow that adds two numbers provided by my application. After that my workflow perform some other features that say 5 minutes.

  My application is the result of the addition from the addition is performed. I don't want to wait for these 5 minutes to finish after what my worlkflow is finished and then obtain the result.

  Hello DeepakPN - first of all, if you use vCO 5.x, we strongly recommend to use the api instead of the old api SOAP REST.

  Now, to answer your question:

  When you run a workflow, the returned soap body includes a return workflow id: this is your workflow token id - essentially the Runspace of your workflow. He looks a bit like this:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
  

  There are several additional lines less than retail, but I left it as an important component of the info here is this tag . The value that it contained should be used with the operation "getWorkflowTokenForId". By providing this ID and your credentials, the resulting SOAP body will contain details of your performance at the time of your request. So, if you have your amount stored as an attribute at the time that you run the query, you will see the results. For my simple test, here is my operation "getWorkflowTokenForId" for a test flow that I came through SOAP:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
              
              1a568e2e-5c15-4b68-9bab-20cb955f0004
              item0
              completed
              completed
              
              20131025120447-0400
              20131025120447-0400
              
  
  
  >
  >
  
  
  
  ]]>
           
        
     
  
  

  Inside the tag, there is a tag that contains each of my entries/attributes. In the code above, 'anyInput' is the input parameter for my workflow and of the "inputTypeName" as an attribute.

  Hope this helps

• The default parameter value does not work in Discoverer Desktop 4i

  Hello
  
  I have a parameter called '' organization '' in the Scout report.
  I want to set its default value to an organization from the list of values. I edited the parameter
  and choose this value from the list in the default value field. But, when I run
  the report, it shows the value used recently for this parameter.
  instead of display the default value.
  I have the same problem with all parametrs in workbooks in Discoverer.
  I use 4i Discoverer Desktop (4.1.41.05.00).
  
  Is that all that I do for Discoverer show me the default value for the parameter, whenever I run the workbook?
  
  Thanks in advance!

  Hello

  Try to set the preference SaveLastUsedParamValue to 0 in the registry.

  Rod West

• Get the default parameter value

  I would like to use the value of the max_no_of_errors parameter in the mapping. Do you know if it's possible?
  I tried something like FULLPACKAGENAME. MAX_NO_OF_ERRORS, but it did not work... Is it possible to do this?
  
  Thank you

  Looking at the specs of a deployed 10.2 OWB mapping package, would be the good variable to make reference to: get_max_errors

  In mapping you need should not specify the name of the package as it will default to local scope.

• 11g DB with the "compatible" parameter value "10.1.0.

  Hello world
  
  I have a upgrade from 9i to 11g r2 database. compatible in this database parameter has been defined as "10.1.0. for this reason, I can't use - for ex-'invisible clues' because they have at least 11.0.0 compatible parameter value.
  
  now I want to change this setting, but I'm not sure what would be done by this action, exactly.
  
  for example, Tom said: "you cannot use some new features like compression table OLTP.
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1203932400346694094
  
  I know invisble index is also depend on this but what else? I couldn't find a sort a list of it. y at - it all? or someone who knows?
  
  Thank you very much.

  OPTIMIZER_FEATURES_ENABLE acts as an umbrella setting to activate a series of features in a version number of Oracle-based optimizer.
  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams165.htm

  compatible
  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams034.htm
  http://docs.Oracle.com/CD/E11882_01/server.112/e25494/create005.htm#i1014800
  http://docs.Oracle.com/CD/E11882_01/server.112/e23633/changes.htm#I638061

• How to display the different attribute value in the ToolTip of selectonechoice

  In the selectonechoice when hovering over the values in the drop-down list, it displays the same value in the ToolTip too. I want to see the value of another attribute in the ToolTip.

  For example if the list displays the name of the lov, ToolTip should show its description attribute value. I tried assigning a different value to shorDesc, but have no effect on the values of the ToolTip.

  

  < af:selectOneChoice value = "#{row.bindings.TfesNdx.inputValue} '"

  label = "#{row." Bindings.TfesNdx.label}.

  required = "#{bindings." ATfes.hints.TfesNdx.mandatory}.

  shortDesc = "#{bindings." ATfes.hints.TfesNdx.tooltip}"/ / changed it to shortDesc =" #{row.bindings.Notes.inputValue} "does not yet "

  ID = "soc17" autoSubmit = "true" >

  < f: selectItems value = "#{row.bindings.TfesNdx.items} '"

  ID = "si17" / >

  < / af:selectOneChoice >

  PS: Using 11.1.1.7.0 version adf

  You probably need property shortDesc on af:selectItem http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_selectItem.html

  For example, you can use af:forEach to make your items to select like in this blog post: http://learnfrommike.blogspot.com/2013/11/adf-using-selectonechoice-in-afiterator.html

  Dario

• In the bindings parameter values

  Hello
  
  I have a jspx file that has a java file support. In the jspx file I have inputText components whose values are linked to a database. In the java file, I can get the values of these components inputText like this:
  String fn = bindings.get("firstName").toString (); where firstName is the id of an attributeValues in the definition of the page.
  At a certain point in my program, I would like to change the values of some inputText. How do you change the value of these links?
  I tried
  bindings.setValue ("firstName", "value");
  but none of these methods.
  I also tried to set the value for the inputText as component
  inputText1.setValue ("value");
  but inputText1 would not be completed until inputText1 is loaded into the page.
  
  Any help would be appreciated.

  Hello

  depends on what is the status of the component. If the component has failed, then the reset button works. If the component has been submitted, then it's a question of what the model is who has updated through this. If the model is ADF, you must give the attribute binding. You access the required attribute with a reference to the ADF link layer - "bindings", then calling bindings.get("name"). Call setInputValue() on it and mount it to JUCtrlAttrsBinding

  Frank

• modify the INSTANCENAME parameter after the backup database

  Hello

  our primary database is configured as follows:

  SQL > show parameter db_name;
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  db_name string prod01

  
  SQL > show the INSTANCENAME parameter
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  instance_name string prod01

  the corresponding backup database is configured as:

  SQL > show parameter db_name;
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  db_name string prod01

  
  SQL > show the INSTANCENAME parameter
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  instance_name string stbyprod01

  Now, the standby database must be enabled. Later, I want to change the stbyprod01 to prod01 INSTANCENAME parameter.

  The question now is: what does take to change the INSTANCENAME parameter? In fact the database pending will be

  already be activated and be considered and treated as a stand-alone database. The former primary database will be used no more.

  I would like to do the following:

  SQL > create pfile = 'initprod01.ora' of spfile;

  SQL > shutdown immediate;

  Oracle # > change the pfile file and change the stbyprod01 to prod01 INSTANCENAME parameter

  SQL > startup;

  SQL > create spfile = 'spfileprod01.ora' of pfile;

  SQL > shutdown immediate;

  SQL > startup;

  That should be all - from my point of view (I know that LISTENER.) ORA and TNSNAMES. ORA should be modified, too).

  If someone has already experiences with the INSTANCENAME parameter change but sees some additional configurations: Please let me know!

  Rgds

  Jan

  1. you can use "alter system set instance_name" to change the value of the instance name.

  2. you must do the following to activate the standby database (NOTE:-this is only for the activation of the backup database and not the passage to digital database)

  1 startup nomount

  2. change the base of Mount Eve.

  3. change the database activate the database pending.

  4. change the database open.

• Presentations of the different browser

  I get a broad vertical spacing between elements on Ff and Opera I get with IE on this page
  http://www.Pieter-Bruegel.co.UK/Gallery/pages/Gallery%20Of%20images.htm
  I prefer the view of EI. What should I do to get this to appear on other browsers, please.

  Yes, you are right. I don't know what the default values are, but since I always
  control that explicitly, I don't need to know.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "smiffy47" wrote in message
  News:f22gbi$GVO$1@forums. Macromedia.com...
  > Thanks, I'm playing with the padding of cell CSS etc. and find how this
  > works. However this made it seems to me that IE and FF use a
  > different
  > default size fill and border of the cell to the other. If the fill is
  > not
  > defined, it seems as default FF a higer default value; That is to say. elements such as
  > images
  > are placed far in part am I correct, and if so, what are the different
  > default values?
  >

• Installer for the simultaneous program defined with the parameters - Script SQL

  I wrote a very simple sql script and I want to save it as a simultaneous Oracle program. I have included a parameter field in the sql script to allow the entry of a value to determine the number of days prior to the script. The script runs correctly in SQL * Plus, but when I try to record it as a competitor Oracle program I get the following errors below:
  

  This works in SQL* PLUS
  
  SELECT emp_id, amount
  FROM tblSalaries
  WHERE hire_date > SYSDATE-&Days;
  
  Enter value for Days: 7
  old    3: hire_date > SYSDATE-&Days
  new  3: hire_date > SYSDATE-7
  
  And it provides my results....

  Although when I save this as a simultaneous program and set the configuration setting and run the simultaneous program and enter the number in the parameter field, work ends with an ERROR with the following:
  

                                                                                                           
  Enter value for Days: EXEC FND_CONC_STAT.COLLECT;
  hire_date > SYSDATE-EXEC FND_CONC_STAT.COLLECT; and
                                      *
  ERROR at line 3:
  ORA-00933: SQL command not properly ended 

  If I put single quotes around '& days', in line 3, I get a different error:
  

  ERROR at line 3:
  ORA-01722: invalid number 

  Do you know what could be the problem?
  Thanks for the review!

  You can try one of these approaches-

  1. replace '& days' in your script with "& 1"- or-".

  2. Add the following to your script at the beginning

  Days := &1;
  

  PL see the developer's Guide Application for your specific version http://www.oracle.com/technology/documentation/applications.html EBS

  HTH
  Srini

• 11.5.9 simultaneous programs log showing the content of another simultaneous program

  Hi gurus

  I have a competitor program that the developer had run into 11.5.9 instance but the log file indicates a different simultaneous program execution.

  What could be the reason?

  Hello

  Maybe the id already exists in your environment.

  Use FNDCPPUR to purge old data and test the issue again.

  Kind regards.

  Philippe.

• ASAP-best place to install the C partition program files or a different partition?

  installation of windows 7 32-bit Professional is underway at present and stuck in the distribution of the partition.

  I have simple command and intend to create several partition inside.

  generally takes 32-bit of windows 7 about 20 GB so I intend to allocate 60 or 100 GB.

  where should I install the applications as google chrome, software buring, Messenger, etc. in partition c partition or different as d, e, etc?

  Program files must be installed in a partition different or is - this ok to install in the c partition?  Is it good to keep the program files in a different partition outside of windows?

  will you please reply as soon as possible because I want to create partition during the installation of windows 7.

  Varadar wrote: installation of windows 7 32-bit Professional is currently under way and stuck in the distribution of the partition. I have simple command and intend to create several partition inside. generally takes 32-bit of windows 7 about 20 GB so I intend to allocate 60 or 100 GB. where should I install the applications as google chrome, software buring, Messenger, etc. in partition c partition or different as d, e, etc?  Program files must be installed in a partition different or is - this ok to install in the c partition?  Is it good to keep the program files in a different partition outside of windows? will you please reply as soon as possible because I want to create partition during the installation of windows 7.

  Hello Varadar, it would be best to let Windows 7 create the larger partition, it can during the installation process.

  After the installation of Windows 7, then install your antivirus software and go to the Windows Update site and download and install all the available Windows updates.

  You can then install all your other programs on the C: partition, or wait until you create other partitions and install the other programs on one or more of the other partitions. It is a personal choice. I did both and prefer to have all my programs on the C: partition with the operating system. When you have finished all the Windows 7 installation process, you can repartition the drive C: and add as much as two more primary partitions.

  Depending on the size of your drive hard, these can be as big or too small that you need to be in the ability of your available hard drive capacity.

  To create additional scores, go to the start ORB, Board Setup, administrative tools, computer management, storage, disk management and a Winodw will fill which shows the 100 MB system partition and the (larger) C: partition.

  Highlight the C: partition (larger), click on it and you will open a Menu that has a few options. Select this option to shrink the partition. You can choose how much to shrink the partition. This will reduce the size of the C: partition and leaves you with a partition unallocated. You can select the unallocated partition and select Create a new Volume, format it in NTFS file system, and choose the size of this partition if you want to add another partition.

  You close just out of all windows. Labels on the partitions can be named (labelled) everything you want them to be.

  I hope this isn't too complicated, but it's a little complicated if you have never done this before.

• Release of e-mail from a simultaneous program in PDF to any member of the team

  
  Hi team,

  I am running Forms of verification Signon periodically, I want the output of this program should be sent to my client in PDF Format.

  How to set up above the need simultaneously to exit in a PDF Format email.

  Please suggest me.

  Thank you

  Anmisha.

  If the output of the program is already a pdf file, then you can just set delivery Options on screen presentation simultaneous program, which will automatically send program output to the e-mail address specified (s).

  Or

  If the output of your program is not in pdf format, you can create a model of data & data definition and exit at the pdf format and set the delivery option.

  I hope this helps.

  See you soon

  AJ