The system of acquisition as in LabVIEW SIGTERM signals

Similar Questions

• Using the acquisition card in Labview

  I am considering the purchase of an NI PCIe-8242 acquisition card to go with my camera ace acA1300-200uc of Basler. I can't find any documentation on how to actually use the inside of a frame grabber Labview, and I'm very inexperienced with regard to the use of Labview. Anyone has any advice or tips on how I can use the acquisition card?

  For reference, I need start a video stream given a trigger to an different Labview vi, then take some pictures and save them to a directory on the computer in the first 30 seconds. I need to keep the video stream up to the end of the trial. But I can't save any video - only a few pictures.

  Thanks in advance!

  Although he needed the VDM, why would you recommend the duration?  He couldn't really use it.  It would be wasted money.  The only value to it is if you already have an application built using the VDM development software.  (which is more than one Service that is more than the card it looks)

  If you have no customer Service, certainly grab some cheap acquisition cards.  If you already have GOING, I would skip the tips here to blindly buy the card and test your USB3 ports prior to the purchase of surplus material.

  As far as how you would work with the BT acquisition card?  Really, you won't.  You will work with the camera that you plug in LV you won't see anywhere mentioned acquisition card.  In MAX, it'll be the camera.  In LV, you will use the resource name of MAX.  The acquisition card will just be additional USB3 ports.

• LabVIEW function to detect the 32 bits (X 86 Program Files) vs 64-bit (Program Files) of the system?

  I'm looking for a function to LabVIEW that detects if the system is 32-bit or 64-bit.  The reason is that I need to change our paths to shoot either the X 86 Program Files folder or in the Program Files folder, I prefer to do this programmatically so they don't have to do it manually every time.

  Thank you.

  I have it.   Thank you

  http://forums.NI.com/T5/LabVIEW/win-OS-type-bit/m-p/1534730#M569747

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• Edge counting and Source of Timing for timed loop on the request for Acquisition of data - not acquiring data on specified rising edge

  Operating system: Windows XP

  Hardware: PCI 6259

  Terminals used: PFI0 and PFI2

  Counters used: Ctr0 and Ctr1

  IM developing an application for the acquisition of data where timed loop synchronization source comes from my PFI2 (using the string A of an encoder).  IM basically trying to acquire data based on the number of ticks from my encoder.  For the synchronization source, I use counter 1 to capture the rising edge and have the loop time-acquisition of data.  At the same time, Im using the counter 0 to count the number of rising edges so I know exactly in what tick data was acquired.  PFI0 and PFI2 are connect to channel A of the encoder.

  Questions:

  Timed loop acquires data at each tick, because when I discover the data (text) file is missing count of my encoder value.  Is it because there is a limitation on the Windows operating system?  I used a noculars to measure the frequency at the maximum rotation of the channel encoder and 6,757 kHz.  All solutions?

  Also, is there anyway I can route the source channel internally an encoder to generate synchronization source instead of using another counter?  I have attached my VI.

  Hello

  All the samples that you acquire will be read by LabVIEW in a sequential manner. Figure 4-21 on the M-series on page 80 (4-34) shows that you will acquire all the samples you request all channels that you enjoy in sequentially.

• 15 - ac122tu: PCI of Data Acquisition and the controller driver of laptop HP 15-ac122TU signal processing

  Hi team,

  I just install windows 7 edition integral and peripheral Bluetooth windows 8.1 is not be detectable, when I search for problem that I came across this PCI data acquisition and Signal Processing controller driver is missing and a unknown device driver missing shownup in my result of troubleshooting. Please help me

  Please find the screenshot for your reference

  Thank you

  

  Hello:

  See if these drivers work...

  CQI PCI controller:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the heat of the system
  protection to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71638.exe

  Bluetooth:

  This package contains the installation package driver for Realtek bluetooth in the laptop models running a supported operating system.

  File name: sp71288.exe

  Unknown dev:

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• Layers of abstraction appropriate to the system of standardized tests

  Hello, I am working on Standardtised test system designed for functional testing of manufactured products.

  Material, a part of the consinsts system of:

  1. system test unit, which provides the power, charges, generating functions, etc. and a PXI chassis with some devices.

  2. everything is related to a test set-up through a mass at the interface of interconnection.

  3. test contains all the material customized to the DUT.

  The goal is to have several units to test systems that could be easily interchangeable and can accept any test set-up. Any test ficture should be plug-and-play capable on any unit test system. In addition, any component of the system must be interchangeable with a component identical to SW without modification and with different components (different provider, different series, different interface etc.) with the least amount of modification to SW. This requires a hardware abstraction layer. What is not clear to me, what is the recommended strategy and how the software layers should be split between TestStand and LabView.

  Assuming that the usual layers of the Test Application-> Application specific layer-> specific to the software device - plug-in-> drivers, what should go where and how it should be implemented?

  Currently, all layers are implemented in TestStand with ASL and DSSP layers more often intertwined. TestStand sequences directly access LV hardware drivers. Adding new hardware needs to edit these two layers, but exits Test Application intact, but it is clear that this approach is not well dimensionnera.

  Plase advice.

  Thanks in advance!

  IVI is a well established and documented standard. You would have to take design decisions less and less code to write. It is easy to use MAX to assign class-specific drivers. You have existing steps on TestStand to IVI. I don't see where it's more complex than from scratch.

  If you went with IVI, I would use the types of step TestStand place class functions in LabVIEW. If it was me, and using lvoop, I would create a step customized for each class type.

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• Error 15 with COLD LAKE in nisyscfg.lvlib:Set the System Image

  Recently updated the code that worked for imaging cRIOs in LV and LV 2012 2011 should be replaced by the new and improved nisyscfg.lvlib screw: define a System Image, get a System Image, etc,...

  I get the following error message when my installed executable tries to imagine a cRIO: ' 15 error occurred at the library function node call in nisyscfg.lvlib: Set the system (folder) .vi:1-> nisyscfg.lvlib Image: System to define Image (file) .vi:1-> GetSetSystemImage.vi'. Displays the possible reason: ' LabVIEW: resource not found. "

  What products/installation packages are required for the system of screw configuration? I'm including NISysCfg_Runtime and NISysAPI_Framework.

  Thanks for your time.

  Problem solved! Correct installation packages are: NISysAPI_Framework, NISysCfg_Runtime, mDNS_Responder, NI_Curl, NI_SSL_Support, NI_TraceEngine, NI_RPC and the mxRmCfg.dll.

• Monitor the files installed in the system by the installer

  Hi all

  I have a program to install my application built through LabVIEW. I need to follow as *.dll files and other files that are installed on the system.

  Can we get a list of the files installed by the installer on the system for the purpose of monitoring?

  Thank you.

  Parag - D

  
  

• E/s digital USB-6008 changes when the system starts

  I was intending to use the USB-6008 housing in a critical application in which the digital I/o lines are used to trigger relays.  The relay should activate when I ask them programmatically.  Otherwise, they must remain open.  The problem is that during a reboot of the operating system, the e/s digital USB-6008 go up and down several times - opening and closing my relay.  It is not acceptable for my application.

  Is it possible to prevent the lines to reach logical high except if ordered to do so?

  There is no way to set the startup on the 6008 States.

  As the system USB boot devices and turns on power to the computer and off the power to the USB ports, on the DIO lines go up and down several times.

  You will need to put a logic of material extra, just after data acquisition to ensure that potentially dangerous output combinations cannot affect the relay and the elements they control.

• The card using PCI-GPIB hangs the system (Windows 7)

  Hello

  I am running Labview 11.0 (32-bit) on Windows 7 (64-bit) computer and card PCI-GPIB to communicate with instruments.

  Can I use GPIB to send commands to the device, but when I used "Measure and Automation" and analysis of the instruments he runs right first time, but if I scan again the system crashes completely (no reaction to any seizure).

  Same thing happens if I use I/O Assistant VI, I can get a response from the instrument and on the second call, the system hangs. Yet, I can send as many orders without any problem, so the source is in the reading stage.

  The PCI-GPIB card worked perfectly well for years on another computer running Windows XP.

  Someone already had this problem and what can be the source of it?

  I had a similar problem, but I just found out that the motherboard was not good...

  Try in another computer... Optionally, you can uninstall and install back the NI 488 drivers. 2...

  -Germain

• Why the basis of NOR-DAQmx for LabVIEW options are grayed out using a custom installation (with Action: Skip)?

  I try to install NOR-DAQmx Base 3.7.0 LabVIEW 2013 (LV is installed). When I try to install Standard, it does not settle for LabVIEW (only the tools common and C and USB), but gives a successful installation message.

  

  When I try to custom installation, all the "...". for LabVIEW 20XX"options are unchecked, dimmed and Action says 'Skip '.

  

  I try this on a 2011 MacBook Air 11 '' running OS 10.9. LabVIEW works very well.

  Thanks for your suggestions.

  Hello

  DAQmx Base gray if poster LabVIEW Installer is not detected on the LabVIEW support system. Did you install LabVIEW and then move it to another location?

  The LV location controls DAQmx Base is...

  / Applications / National Instruments/LabVIEW LabVIEW.app

  Thank you

  Steven T.

• Computer says Runtime Engine installer does not meet the system requirements.

  I am running mac OS 10.4.11 on an iBook G4 (ppc).

  I try to install the LV 8.6.1 runtime in order to use editing utilities were created by the user with the scripts of LV.

  I have LV 8.5 (with installed scripts).

  

  "You can not install a Labview 8.6.1 run-time engine on this volume.  Make sure that your system meets the requirements.

  Is the system requirements, the same as the LV 8.6.1 development environment?

  LV 8.6.1 does not not on ppc processors?

  Thank you!

  The requirements for a time of execution is the same as the development system. Don't know what you would be able to do it with just the execution anyway.

• Install OR Vision on the system in real time

  Hello

  I am trying to install NI Vision RT and NOR-IMAQ RT on my controller PXI-8108. However, I still get an error, there are unresolved dependencies and that some version of NIVISSVC is necessary.

  

  Does anyone know a solution to my problem?

  Is this problem related to the problem described in the knowledge base (Document ID: 46PK6PP6)?

  Some data from my host system:

  -LabVIEW 8.6.1

  -Measurement & Automation Explorer 4.6.1

  -NI Vision 8.6 (treatment of Image and Machine Vision, and Services)

  NOR-IMAQ 4.1

  OR-IMAQ I/O 2.2

  NOR-IMAQdx 3.2

  The PXI controller:

  PXI system (OR PXI-8108)

  PCI-GPIB

  -Chassis 1 (PXI-1042 (q)

  PXI-6733

  OR PXI-8432/4

  PXI-6233

  Thanks in advance for your help

  Bernd

  After installing Vision 9.0 and NOR-IMAQ 4.4 on my host, I had no more problems with the installation on the system in real time.