The tool pen and open objects: only center align STROKE?

Similar Questions

• All the program icons have the same appearance and open Windows Media Center

  Original title: cannot start a program
  When I click on an any program icon on the Windows 7 Desktop, a window appears with its contents: suggested program to open Windows Media Center. All the programs on the desktop icons have the same appearance.

  Using Word 2007 to get an example:

  I've seen this happen when opening a program via a shortcut on the desktop (for example. LNK file), you are asked what type of program to open it with. After you select theWord (or another program) via the Select a program from a list of programs installedand checkalways use the selected program to open this type of file, the referenced by the shortcut of origin Word document opens in Word as it should.

  The problem is that now all shortcuts (for example. LNK files) on the desktop or in the Explorer will want to be opened by Word and use Word icon to display the shortcut. This is known as a file association and the default icon. The same condition can occur if you have performed these actions on one. JPG or even a. EXE, but the. LNK explanation is much more likely.

  This has happened enough that a small utility was written to cancel the. LNK file association was created. There is a registry hack to do this, but I recommend the utility unLNK for its ease of use.

  A utility to Unassociate Types of files in Windows 7 and Vista
  http://www.Winhelponline.com/articles/231/1/an-utility-to-unassociate-file-types-in-Windows-7-and-Vista.html

  Just use the utility to unassociate the. LNK files. Operating instructions are available on the web page above (the same place to get the utility).

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  k,

  It looks like you might be haunted by the Align attribute to the ghost of the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• Help with the tool pen when moving CS5.1 to CC

  I never use PS, but still did not used to the tool pen in CC, especially when compared to CS5.1.

  I would be eternally grateful if someone could tell me what I'm doing wrong or how do things!

  In CS5.1 I could draw a path with the pen tool, then command-drag on the line between two points to change the shape of the path between these two points. In CC when I ordered-drag path of shape changes but made the way across two points, I am working on.

  In CS5.1 only the length of the handles Bezier control altered, in CC length and angle of the altered control handles, which affects the path I want to change.

  So what I am doing wrong? I use the pen and the path a lot and I'll have to go back to CS5.1 to do any series and complex path works because I can not familiarize themselves with the new CC pen tool. Help!

  Post edited by: Tim Atherton

  Also, with the Direct Selection tool selected see if checking force path by dragging in the options toolbar makes a difference.

  

• Why the tool pen decided to stop letting shapes on the tour?

  I am tracking a series of squares of aerial images of buildings. After I updated my illustrator, the pen tool decided to stop to let me do this in a clean way. For example, I'm doing a sketch for a shopping centre, a floor plan based. I draw a square, my next shape is a rectangle. I hold SHIFT key to allow the tool pen anchor immediately above one of the anchors of the place. Previously, I would, and everything would be fine. Now I'm doing it, and the second that I create my next point, it forces the anchor first outside the anchor of squares. It also leaves not the features overlap each each other. He moves. So instead of having two squares which affect, suddenly 1pt. Where they touch is now 2pt because moving automatically forms without saying me it. So I get my tool of choice to move the points back where I had originally placed. I have no slam on. In fact, it feels almost as if it is anti slam anchors. With glance on this subject makes it even worse. What is going on?

  Here's an example, let me remind you that all these places are supposed to be of the same width and with a uniform wall. The stylus moves my anchors in all directions.

  

  Here is an example of how the front worked pen tool I have updated. Each section is an individual shape. But they overlap with ease.

  

  How can it be a bug in Rectangles to live when he said that it is using the pen to create the forms?

  Mr Nagoo, I suspect it is because you have "" Align new objects to the grid of pixels"turned on (see the wheel of Transform Panel menu).

• New path-layers of all lines with the tool pen?

  Hello! I am currently using Illustrator CS6 as a test version, and when I use the tool pen to make a beaver (school work), it all end in a single layer. I want to have a new layer-path of each line with the pen tool, so I can remove rows from the layer panel too. For the moment, it's a layer that has a picture of a beaver, and I can't see the individual lines that I drew. When I used CS5 recently I had no such problem.

  There is a setting that I can change or does have something to do with the news of CS6?

  If you want to see a 'sex' for each object changes the display of the layer panel by choosing Options from the Panel menu in the layer panel. In the lower part of the Panel options window, make sure that groups and objects are both checked. You will then see a 'sex' for each object.

  I quote 'sex' here because technically they aren't the layers. They resemble layers and are in the layer panel, but they do not exactly allow options that allow actual layers. You can select and move objects in the Panel this way however.

• Where is the tool pen?

  It is a very simple question that I can't understand, and this may sound stupid. Where is the tool pen? I'm pretty new to sequels, I used CS6 for a long time but now in DC, I can't find the pen tool, it used to be in a bar on the top and now it is not there. I feel very stupid, and there is probably a very simple answer. I want to make a mask. IM on mac using Adobe after effects 2015.

  the first thing I teach my students is "reset workspace. When you start with the software and it has so many shortcuts you'll ruin things. probably, you don't see the tools Panel. Windows-> work-> reset standard space.

  and if you want, you can use the shortcut 'G '.

  see if it's ok now

• How do I move the two forms at the same time using the tool pen

  I tried merging groups 1 2 and 3, so they can be handled together. I've grouped them and they merged, but when I try and move with the pen tool they move separately. For my project, I need to be able to change the shape of 12 and 3 using the pen tool, how would I go to do this?

  they set out like a vector Illustrator diagram, I've merged them there and imported, but they always move separately.

  Thanks in advance

  If you work with multiple masters and the tool pen, you use the Ctrl/Cmnd key to change the pen of a selection tool that resembles a small white inverted V. You can drag a selection around multiple points on a path and then hold down the SHIFT key and select more points on a different path. Once selected you release the Ctrl/Cmnd key and when you go near a selected vertex selection tool appears again, but this time it is a small black reverse V. and drag.

  If you want to transform these points then all you have to do is press Ctrl/Cmnd + t when they are selected and you will actually have a better tool paths of transformation you get in Illustrator.

  He is essentially on the functioning of the tool pen in Illustrator if you select the direct selection in artificial intelligence (the key) and then the pen tool (p key) and use the Alt/Option key to switch to the top to convert or Ctrl/Cmnd to direct selection points.

  BASIC Edition of masks stuff covered in the help files and explained in community resources, if you enter editing masks or change forms or the pen tool in the search help field at the top right of the AE.

  If you are using multiple forms on a single shape layer, you can do the same by providing that the forms are curves of Bézier or Rotobezier.

  If the paths of the form or masks are on separate layers, you are out of luck. There is no way to change the multiple paths on different layers at the same time. I don't expect that there is a way to do it. Here's a short demo:

• I get this error message, "could not not use the tool pen because of a program error."  What should I do to fix this?

  Like the above statement, I get this error message, "could not not use the tool pen because of a program error."  What should I do to fix this?   I use PhotoshopCC a lot for work, so if someone could help me quickly, I would be grateful.

  Please read this and acts accordingly (restoration of preferences after making sure all custom presets, actions, patterns, brushes etc. have been registered may be of special interest):

  t http://blogs.Adobe.com/Crawlspace/2012/07/Photoshop-basic-troubleshooting-steps-to-fix-MOS - issues.html

  http://forums.Adobe.com/docs/doc-2325

• How to extrude a path created with the tool pen

  Hi all

  I created a path with the tool pen (part Brown) and now I want to extrude, but output is the set containing the block (see image below)

  Now, I have tried everything, from the grouping of transparent traces, etc., but nothing works.

  How to extrude my way?

  Thank you

  

  It is because you applied an effect hatched the path before extrusion it. You are effectively 'extrusion' the raster image, which is a rectangle.

  Don't, don't. Apply the frame effect to a rectangle and store that as a symbol. Give the desired path to extrude a simple filling and extrude. Then use the veneering of 3D effect feature to map the symbol to the desired surface.

  JET

• In using the tool pen as a Guide?

  Is it possible to use the tool pen of freedom as a guide? I used the "Auto layer blending" and there are some shifts. If I use the tool pen of freedom at the edge where the mixture was made. After I correct misalignments, I want to get rid of the sketch of the pen tool. I tried to put the pen tool on its own layer, but when I deleted the layer, the pen marking tool was still there. Is it possible to get rid of the marking pen after resolving misalignments?

  Thank you

  Lou

  loudiamond wrote:

  Is it possible to get rid of the marking pen after resolving misalignments?

  Delete it tracks Panel.

• Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar...

  Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar. However, if I click with the right button on a link and select "Open link in a new tab", the tab displays the URL in the address bar. If it works when a new tab it's not in a new window.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted the bridge and PS, and I rest

  My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted bridge and PS, and I restarted the computer (Mac). Still the same problem.

  I thank assani, but it wasn't the answer. The problem was, I finally understood, that the "option for generation of quality and preview thumbnails" wasn't on "high quality" as it usually is. I have no idea how this happened as I never change this option.

  Thanks a lot for your help.

  Mitchel Gray

• After downloading CS6, I try to open the .exe file and I get only a text file.

  I'm on a MacBook Pro and I have followed all the instructions, downloaded the Akamai Download Manager, and then the giant 4.79 GB download began.  When it was over, nothing happened, so I clicked on the DesignWebPremium_CS6_LS16.exe and a file in TextEdit keeps opening.  Without Akamai, no installation, nothing.  Then I clicked on the other file downloaded (giant) and I was prompted to choose an application to open.  I sailed the Akamai NetSession and after a long pause, I git a dialog box telling me that Akamai is unable to open this type of file.  I erased my downloads and re-uploaded a couple of times and continues to be the same thing.

  Hi aslalsdkg,

  Please make sure that you have downloaded the correct file as it seems that you have downloaded the file for Windows.

  The .exe file is intended to be run on Windows. MAC Installer has the .dmg extension

  Try to download the software from the direct links on the page: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  But make sure you follow the instructions mentioned on the page before you start the download.

• is no longer able to see the 8 tiles frequently open - show only 4 now - must use the command/scroll down to min size of the mosaic each time

  With the new version of firefox - not able to see tile 8 discovers each tab opening now - only 4 show now - have to use mouse scrolling and the control key to minimize the size of mosaic to see several cages - used to 8 plates and 8 slabs shown whenever a new tab was opened. Basically, I wan to be able to set the screen for 8 tiles not only 4 each time I open a new tab.

  Hi, as you know, you can change the number of tiles on the Page of the new tab to zoom in or out (Ctrl and + key, or Ctrl and - key).

  If you want to keep the same zoom setting when a new tab is clicked: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.preload and double-click on it to change the 'value' of true to False.

  It is also possible about: config to change the maximum number of tiles by scrolling to the browser.newtabpage.columns (or Rows), then right-click > modify to set a new number of 'value '.

  As an alternative, you might like to try the add-on new tab tools.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.