The transformation that is inherited from the lines?

I noticed that this new version of Illustrator CC 2015 had changed the functionality of how is she changing lines.

For example, I have a line drawn at a 45 degree angle.  When you select this line with the Selection tool while keeping the SHIFT key and dragging a point with my mouse, the line is more in line with its original angle of 45 degrees.

Can I change something in my preferences to return about the old features?  It is most annoying.

This is to constrain the direction handles when moving from a path.

If you want to move a point and keep the angle of 45 degrees (or any angle that has been pulled) just take the point (no need to change tools) and move it in the direction of the angle.

No need to use the SHIFT key, the line is a form in this version and automatically snaps to the corner which is drawn in.

Tags: Illustrator

Similar Questions

  • I can't log on my laptop that I inherited from my mother in law...

    I hope someone can help me with this problem!  I inherited a laptop running Windows 7.   The username and password of my late mother in law was locked, and I use it in this way, as there was not a chance to get the password.  Well, someone more than likely one of my grandchildren, opened and shut down the computer.  When I restarted the computer, he asked the password.  I clicked on another user and it must have been my late father in law and of course, I don't know his password either.  When I tried to guess their passwords, it does not work and when I tried to reset the password, he said I need a disk to do so.  I inherited not a disc.  Y at - there someone who can help me?  I would be eternally grateful!  I am at a loss.  All my stuff is in my laptop.  I've been laid up for 2 years and it has been and invaluable asset to my sanity and things!  I'm really lost.  Thank you Paula 54

    It is a violation of the code of conduct of this forum to post information on the cracking of passwords in Windows. Take the machine to a computer repair shop to show the property so that they can solve your problem. When the machine is once again of the device, you must do two things:

    • Create, test, and document an alternative admin account so you never again fall into such a trap.
    • Many people ignore the need for regular backups until they suffer a major disaster. Get a 500 GB drive in a USB case (it costs less than $60!), and then start a regular backup process. Backup once a week is often adequate in a domestic environment.

  • Why my anchor will not stay where I put it? It keeps coming from upward or down the line that I want to connect.

    Can't seem to fix it. It is not a network problem, I tried. The anchor at the end of this line, I train with a box intersection refuses to line up evenly, despite the Illustrator tell my which anchor crosses the box. It seems me to zoom in and see that the anchor is always pushed more high or lower than the vertical line. No matter what I do the line refuses to cooperate. Even delete the file and try on a new file do not work.

    You line up on the pixel grid in the files in question? What version of Amnesty International and the operating system are you using? This new Document profile did you start from?

  • Why is the 200 GB $44.99 a plan inherited from year more expensive than the monthly plan the new 200 GB $2.99 a month plan ($35,88) - what's the catch here?

    Why is the 200 GB $44.99 a plan inherited from year more expensive than the monthly plan the new 200 GB $2.99 a month plan ($35,88) - what's the catch here? is there a reason why the new plan is less expensive? they are trying to phase out the inheritance plan? is there a difference in storage w the new plan and the legacy for the difference in price (of the problems of the different devices w - computer laptop Mac, iPhone, iPad?)

    The only difference is that it is charged monthly.

    As shown in the following, you may be able to increase your storage space or reduce your costs by opting for the monthly package. Annual storage iCloud - Apple Support plans

  • where can I find my document saved that I worked from an e-mail, and then saved using backup on the Word icon?

    where can I find my document saved that I worked from an e-mail, and then saved using backup on the Word icon?

    Here are two things to try:
     
    The file is saved in the Temporary Internet Files folder. To locate the path, open the attachment to new then, and now Alt, press F, and to open the Save as window. In the save window slot, right-click on another file in the list, and then click Properties. On the general tab, copy the full path to the location. Then, open a Windows Explorer window and paste the path copied into the address field. This is where the edited file was saved.
     
    Since Christmas

    Copy this line:

    Search-MS:DisplayName=temp%20Files&crumb=ext%3AZZZ*&crumb=location:shell:cache%5CContent.IE5

    Now press Windows-E, Ctrl-Alt-D-V

    ZZZ change to the extension of the file you edited, and then press enter.

    This should show all the recently saved files in temporary Internet files with this extension. Good luck!

    PS Si the file is, please copy in your documents folder before anything else. Open the copy to work.

  • I need to increase the memory available to an application from command line (DOS window)

    At the cmd prompt, I perform the mem command and get the following. I have 3gig of ram but the mem says I have 0 contiguous extended memory available? Is there a way to access this memeory?

    memory 655360 bytes total conventional
    655360 bytes available in MS-DOS mode
    578240 largest executable program size

    1048576 bytes total contiguous extended memory
    0 bytes available contiguous extended memory
    941056 bytes available XMS memory
    MS-DOS resident in high memory area

    This solution does not work, thanks for the reply but. I found that Vista locks going to the Command.pif running cmd from Windows users, so even if you terminate the process cmd it active again. I also found a mistake in one of the sons were he mentions emm396.exe as a way to check the emm on Vista memory. My Home Premium installation isn't emm386.exe.

    Anyway once again don't thanks for the help no wonder that many stores do not use Vista. There are a number of development tools that run from command line.

  • U3415W, shows that the lines and flickering

    If I plug a DP cable on the screen, it shows nothing and goes into 'emod to save energy'. I have to restart my pc in "safe mode" to see the screen again.

    To remedy this, I tried CDM and this just made the screen start flickering and showing the lines upward, so I googled and someone in this forum said that if I disable the 1.2 DP (which is default) things would go smoothly.

    Ive tried with just the cable of CDM at the U3415W. Did not work.
    Ive tried with the CDM cable to the U3415W and the DP cables my U2713W and then I just get the U2713W to work.

    Ive attached a picture with 2 screens side by side, so you can see what I mean.

    What is my graphics card which cannot handle this?
    Ive attached my information from dxdiag on my display information.

    Help, please.

    ---------------
    Display devices
    ---------------
    Card name: AMD Radeon 200 R9 / HD 7900 Series
    Manufacturer: Advanced Micro Devices, Inc.
    Track type: processor AMD Radeon Graphics (0 x 6798)
    DAC type: DAC (400 MHz) internal
    The device key: Enum\PCI\VEN_1002 & DEV_6798 & SUBSYS_04441043 & REV_00
    Memory display: 2795 MB
    Dedicated memory: 3051 MB
    Shared memory: 3840 MB
    Current mode: 2560 x 1440 (32 bit) (60 Hz)
    Name of the monitor: generic PnP monitor
    Monitor model: DELL U2713HM
    Monitor ID: DEL4080
    Native mode: 2560 x 1440 (p) (59,951 Hz)
    Output type: external Displayport
    Driver name: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
    The driver file version: 8.17.0010.1395 (English)
    Driver version: 15.200.1046.0
    DDI version: 11
    : Model WDDM 1.1 driver
    Driver attributes: Final retail
    Date of the driver/size: 23/06/2015 04:08:44, 1440592 bytes
    Would be WHQL logo: Yes
    Date stamp WHQL:
    The instrument identifier: {D7B71EE2-24D8-11CF-8076-4E24BEC2C535}
    Vendor ID: 0 x 1002
    Device ID: 0 x 6798
    SubSys ID: 0 x 04441043
    Revision ID: 0x0000
    Strong name of the driver: oem50.inf:ATI. Mfg.NTamd64.6.1:ati2mtag_R575:15.200.1046.0:pci\ven_1002&dev_6798
    The driver rating: 00E62001
    Video Accel: ModeMPEG2_A ModeMPEG2_C
    Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
    {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) (YV12, 0 x 32315659) = Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    D3d9 Overlay: Unsupported
    DXVA-HD: not supported
    DDraw status: enabled
    D3D status: enabled
    AGP status: enabled

    Card name: AMD Radeon 200 R9 / HD 7900 Series
    Manufacturer: Advanced Micro Devices, Inc.
    Track type: processor AMD Radeon Graphics (0 x 6798)
    DAC type: DAC (400 MHz) internal
    The device key: Enum\PCI\VEN_1002 & DEV_6798 & SUBSYS_04441043 & REV_00
    Memory display: 2795 MB
    Dedicated memory: 3051 MB
    Shared memory: 3840 MB
    Current mode: 3440 x 1440 (32 bit) (60 Hz)
    Name of the monitor: Dell U3415W (miniDisplayPort)
    Monitor model: DELL U3415W
    Monitor ID: DELA0A7
    Native mode: 3440 x 1440 (p) (59,973 Hz)
    Output type: external Displayport
    Driver name: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
    The driver file version: 8.17.0010.1395 (English)
    Driver version: 15.200.1046.0
    DDI version: 11
    : Model WDDM 1.1 driver
    Driver attributes: Final retail
    Date of the driver/size: 23/06/2015 04:08:44, 1440592 bytes
    Would be WHQL logo: Yes
    Date stamp WHQL:
    The instrument identifier: {D7B71EE2-24D8-11CF-8076-4E24BEC2C535}
    Vendor ID: 0 x 1002
    Device ID: 0 x 6798
    SubSys ID: 0 x 04441043
    Revision ID: 0x0000
    Strong name of the driver: oem50.inf:ATI. Mfg.NTamd64.6.1:ati2mtag_R575:15.200.1046.0:pci\ven_1002&dev_6798
    The driver rating: 00E62001
    Video Accel: ModeMPEG2_A ModeMPEG2_C
    Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
    {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) (YV12, 0 x 32315659) = Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
    D3d9 Overlay: Unsupported
    DXVA-HD: not supported
    DDraw status: enabled
    D3D status: enabled
    AGP status: enabled

    Good point about the button. Get it exchanged.

  • BGP announcement: How do I remove the attributes "next hop" and "metrics" inherited from OSPF?

    Hello

    I use a router THAT WAN Cisco ASR1001 connected via BGP AS65075 with our ISP.

    This router is connected through OSPF with our Cisco 7206VXR/NPE-G2 firewall.

    Topology:

    ISP <- bgp="" -="">RT 1001 <- ospf="" -="">FW 7206 <->LAN

    On the WAN router, static routes are set to null0 to always announce our class C networks.

    Route IP 192.168.10.0 255.255.255.0 Null0 250

    ...

    Network guidelines are placed in our BGP configuration:

    router bgp 65075

    The log-neighbor BGP-changes

    neighbor EBGP-PEER-IPv4-peer group

    EBGP-PEER-IPv4 neighbor fall-over bfd

    neighbour 192.168.88.138 distance - as 65200

    192.168.88.138 a neighbor EBGP peers PEERS-IPv4

    192.168.88.138 ISP IPv4 neighbor description

    next password 192.168.88.138 7 unknown

    !

    ipv4 address family

    ...

    network 192.168.10.0

    ...

    a neighbor EBGP-PEER-IPv4 soft-reconfiguration inbound

    EBGP-PEER-IPv4 neighbor distribute-list prefix-v4 on

    an EBGP-PEER-IPv4 neighbor prefix-maximum 100

    neighbor EBGP-PEER-IPv4-1 filter list out

    neighbor 192.168.88.138 activate

    neighbor 192.168.88.138 filter-list 2

    output-address-family

    A part of these networs are also learned through OSPF. If these routes are present in the routing table:

    RT-01 #sh ro ip 192.168.10.0

    Routing for 192.168.10.0/24 entry

    Known via "ospf 1", distance 110, metric 20, type extern 2, metric 1 forward

    Published by bgp 65075

    Last update to 192.168.0.79 on Port - channel1.28, 7w0d there is

    Routing descriptor blocks:

    * 192.168.0.79, from 192.168.0.71, 7w0d there is, through Port - channel1.28

    See metric: 20, number of share of traffic is 1

    Because these roads are active in the rounting table. Announcing BGP based on his and attributes "next hop" and "metric" are inherited from OSPF:

    RT-01 #sh ip bgp neighbors 192.168.88.138 announced-routes

    ...

    Network Next Hop path metrics LocPrf weight

    ...

    * > 192.168.10.0 192.168.0.79 20 32768 I

    ...

    Is it possible to remove the legacy of OSPF into BGP attributes?

    How to set the "next hop" to the value 0.0.0.0 and "metric" to 0?

    Thank you

    Best regards

    Jérôme

    Hello Berthier,

    NEXT_HOP is a hill & attribute mandatory path including the eBGP value is the IP address of the BGP peer (specified in the neighbor's remote control) where the router learns the prefix. Thus, your peers (eBGP) will still see the IP 192.168.88.138 in your BGP Next Hop as updates. I agree you the output of the command ' sh ip bgp neighbors 192.168.88.138 roads announced "can be confusing, but not worried about it.

    Metric 20 is cause of path must be acquired by OSPF. Copy in default atributte MED BGP metric. So I see that you have only a peer is very important change this value because MED is not transitive, if this value is not propagated by other ACE access your provider. Anyway, if you want to change, you must:

    1. create a list of prefixes with one or more prefixes that you want to "reset" the MED value:

    list of prefixes prefix-to-reset-MED seq 5 permit 192.168.10.0/24

    list of prefixes prefix-to-reset-MED seq 10 permit X.X.X

    2. create a roadmap

    allowed to reset - MED card route 5

    match of prefix-to-reset-MED IP prefix-list

    the metric value 0

    road map provided to zero-MED allowed 10

    !

    The last road map is necessary to ensure that the rest of the prefixes are sent.

    3. apply the road map

    a neighbor EBGP-PEER-IPv4-roadmap given to zero-MED on

    Concerning

  • RowAlreadyDeletedException so that the line exists in the database

    Hello

    JDev 11.1.2.4

    I put in place the mechanism to keep the current line on the restoration.

    http://andrejusb.blogspot.ch/2013/03/ADF-rollback-and-keep-current-row.html

    In a managed bean I call the restore operation, and if the restoreCurrentRow is called on all your.

    The code is in the VOImpl database which all your runs from:

    protected void restoreCurrentRow() {}

    If (currentRowKey! = null) {}

    _logger.fine ("START RESET CURRENT ROW");

    _logger.info ("restoreCurrentRow" + this.getClass () + "" + currentRowKey + "" + this.getName ());

    this.executeQuery (); < = RowAlreadyDeletedException thrown here

    Key k = new Key (currentRowKey.getAttributeValues ());

    [] Found line = this.findByKey (k, 1);

    If (found! = null & & found.length == 1) {}

    Line r = this.getRow (k);

    this.setCurrentRow (r);

    If (r! = null & & currentRowIndexInRange > = 0) {}

    this.scrollRangeTo (r, currentRowIndexInRange);

    }

    }

    _logger.fine ("FINISHING RESET CURRENT ROW");

    }

    currentRowKey = null;

    }

    For on VO, I get an RowAlreadyDeletedException exception:

    < Utils > < buildFacesMessage > ADF: addition of the following JSF error: line entity with key oracle.jbo.Key [2044346 null] is not in VwWrkdclWrkTitle.

    oracle.jbo.RowAlreadyDeletedException: Houston-25019: line entity with key oracle.jbo.Key [2044346 null] is not in VwWrkdclWrkTitle.

    at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:875)

    at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:552)

    at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8311)

    at oracle.jbo.server.EntityImpl.populate(EntityImpl.java:6975)

    at oracle.jbo.server.EntityImpl.merge(EntityImpl.java:7314)

    at oracle.jbo.server.EntityCache.addForAltKey(EntityCache.java:1087)

    at oracle.jbo.server.EntityCache.add(EntityCache.java:541)

    at oracle.jbo.server.ViewRowStorage.entityCacheAdd(ViewRowStorage.java:3173)

    at oracle.jbo.server.ViewRowImpl.entityCacheAdd(ViewRowImpl.java:3799)

    at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:5913)

    at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:3637)

    at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:3492)

    at oracle.jbo.server.QueryCollection.get(QueryCollection.java:2209)

    at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:5125)

    at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2961)

    at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2817)

    at oracle.jbo.server.ViewRowSetIteratorImpl.refresh(ViewRowSetIteratorImpl.java:3058)

    at oracle.jbo.server.ViewRowSetImpl.notifyRefresh(ViewRowSetImpl.java:2797)

    at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1255)

    at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:1413)

    at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:1319)

    at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:1304)

    at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:7211)

    at org.xxx.common.model.adfbc.base.MyViewObjectImpl.restoreCurrentRow(MyViewObjectImpl.java:238)

    at org.xxx.common.model.adfbc.base.MyViewObjectImpl.afterRollback(MyViewObjectImpl.java:230)

    at oracle.jbo.server.DBTransactionImpl.rollback(DBTransactionImpl.java:2544)

    at oracle.adf.model.bc4j.DCJboDataControl.rollbackTransaction(DCJboDataControl.java:1600)

    VwWrkdclWrkTitle is a SQL view.

    In the managed bean, I call a PL/SQL operation. PL/SQL commits the changes, and then I call the restore operation.

    So I set a breakpoint after the operation of PL/SQL and test the SQL and I get a single record. Because the PL/SQL is committed, before restoring SQL must return the same as the restoreCurrentRow method.

    I do not understand this RowAlreadyDeletedException exception because the line exists.

    Thank you

    I changed to a primary key that is never zero, and it works. Seems to be a bug in the ADF.

  • Select the lines with the maximum value for a date where another column is different from 0

    Hello

    I need to write a query on a table (called DEPRECIATION) that returns only the rows whose date maximum (PERENDDAT_0 column) for a specific record (identified by AASREF_0), and where the other column in the table called DPRBAS_0 is different from 0.

    If DPRBAS_0 is equal to 0 in all the lines of a specific record, then return the line with date maximum (PERENDDAT_0 column).

    To be clearer, I give the following example:

    Suppose we have the following data in the table of DEPRECIATION:

    AASREF_0 PERENDDAT_0 DPRBAS_0
    I2011001074331/12/20150
    I2011001074331/12/20140
    I2011001074331/12/20130
    I2011001085612/31/20160
    I2011001085631/12/20150
    I2011001085631/12/2014332
    I2014001223812/31/2016445
    I2014001223831/12/2015445
    I2014001223831/12/20140

    The query must return only the following lines:

    AASREF_0 PERENDDAT_0 DPRBAS_0
    I2011001074331/12/20150
    I2011001085631/12/2014332
    I2014001223812/31/2016445

    Thanks a lot for your help!

    This message was edited by: egk

    Hello Egk,

    The following query works for you.

    SELECT AASREF_0, PERENDDAT_0, DPRBAS_0

    FROM (SELECT AASREF_0,

    PERENDDAT_0,

    DPRBAS_0,

    ROW_NUMBER)

    DURING)

    AASREF_0 PARTITION

    ORDER BY

    CASE WHEN DPRBAS_0 <> 0 THEN 1 OTHER 0 END DESC,.

    PERENDDAT_0 DESC)

    RN

    DEPRECIATIONS)

    WHERE rn = 1

  • Procedure with the DML statements that insert values from 1 to 100 in only one table and it is matching word equivalent in the other

    Can someone help me create a procedure with the DML statements that insert values from 1 to 100 in a table "abc" and the procedure must connect the numbers into words in another table "xyz" without doing a commit explicitly. "."

    Currently on trial...

    SQL > create table abc (num number);

    Table created.

    SQL > create table xyz (num varchar2 (100));

    Table created.

    SQL > ed
    A written file afiedt.buf

    1. insert all
    2 values of 1 = 1 then in abc (num) (l)
    3 when the values of 1 = 1 then in xyz (num) (to_char (to_date(l,'j'), 'jsp'))
    4 * Select the level from dual connect by level<=>
    SQL > /.

    200 rows created.

    And the result...

    SQL > select * from abc;

    NUM
    ----------
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    ..
    ..
    ..
    98
    99
    100

    100 selected lines.

    SQL > select * from xyz;

    NUM
    ----------------------------------------------------------------------------------------------------
    one
    two
    three
    four
    five
    six
    seven
    eight
    nine
    ten
    Eleven
    twelve
    ..
    ..
    ..
    98
    Nineteen eighty
    Cent

    100 selected lines.

  • SQL query to search for the line that contains the identifier for each consecutive group

    Hello

    I'm on 11.2.0.3 Enterprise Edition.

    I have a strange request here - do not know if this is possible without going to procedure...

    Given these data of the sample:

    create table test_status (
  status varchar2(10),
  revision_id number,
  revision_timestamp timestamp);

insert into test_status values ('PROPOSED', 1, systimestamp);
insert into test_status values ('PROPOSED', 2, systimestamp);
insert into test_status values ('PROPOSED', 3, systimestamp);
insert into test_status values ('ACTIVE', 4, systimestamp);
insert into test_status values ('ACTIVE', 5, systimestamp);
insert into test_status values ('PROPOSED', 6, systimestamp);
insert into test_status values ('PROPOSED', 7, systimestamp);
insert into test_status values ('ACTIVE', 8, systimestamp);
insert into test_status values ('ACTIVE', 9, systimestamp);
insert into test_status values ('FINISHED', 10, systimestamp);
insert into test_status values ('FINISHED', 11, systimestamp);
insert into test_status values ('FINISHED', 12, systimestamp);

    Gives me:

    SQL> select *
  2  from test_status
  3  order by revision_id;


STATUS     REVISION_ID REVISION_TIMESTAMP
---------- ----------- -----------------------------
PROPOSED             1 25-SEP-14 04.49.47.954000 PM
PROPOSED             2 25-SEP-14 04.49.47.962000 PM
PROPOSED             3 25-SEP-14 04.49.47.966000 PM
ACTIVE               4 25-SEP-14 04.49.47.969000 PM
ACTIVE               5 25-SEP-14 04.49.47.972000 PM
PROPOSED             6 25-SEP-14 04.49.47.976000 PM
PROPOSED             7 25-SEP-14 04.49.47.979000 PM
ACTIVE               8 25-SEP-14 04.49.47.982000 PM
ACTIVE               9 25-SEP-14 04.49.47.987000 PM
FINISHED            10 25-SEP-14 04.49.47.991000 PM
FINISHED            11 25-SEP-14 04.49.47.996000 PM
FINISHED            12 25-SEP-14 04.49.48.000000 PM


12 rows selected.
ws selected.

    I want to get this result:

    STATUS     REVISION_ID REVISION_TIMESTAMP
---------- ----------- ----------------------------
PROPOSED             3 25-SEP-14 04.49.47.966000 PM
ACTIVE               5 25-SEP-14 04.49.47.972000 PM
PROPOSED             7 25-SEP-14 04.49.47.979000 PM
ACTIVE               9 25-SEP-14 04.49.47.987000 PM
FINISHED            12 25-SEP-14 04.49.48.000000 PM

    Then query the table ordered by Revision_Id, I would get the line containing the highest revision for each consecutive group of status values.  I am able to get the line containing the highest revision for each separate status, value, but I can't deal with the scenario where a state value reappears later.  In the case of the real world, it is a workflow and I need to take into account the fact that an element through the workflow may be redirected to the back front she proceeds forward again.

    Hope it makes sense.

    Thank you

    John

    Hi, John,.

    John OToole (Dublin) wrote:

    Hello

    I'm on 11.2.0.3 Enterprise Edition.

    I have a strange request here - do not know if this is possible without going to procedure...

    ...

    Do not no stinkin' procedure:

    WITH got_grp_id AS

    (

    SELECT the status, revision_id, revision_timestamp

    ROW_NUMBER () OVER (ORDER BY revision_id)

    -ROW_NUMBER () (PARTITION STATUS

    ORDER BY revision_id

    ) AS grp_id

    OF test_status

    )

    SELECT status

    MAX (revision_id) AS revision_id

    MAX (revision_timestamp) DUNGEON (DENSE_RANK LAST ORDER BY revision_id)

    AS revision_timestamp

    OF got_grp_id

    GROUP BY status, grp_id

    ORDER BY revision_id

    ;

    For an explanation of the technique of Difference sets used here, see

    Analytic Question lag and lead and/or

    Re: Ranking of queries

  • How to draw a line (with the line segment tool) then draw another line, from those previous anchor point. When I try immediately draw another line on the other anchor lines it try to turn instead.

    I'm following a course of basic fundamental illustrator on Lynda. The video of "draw straight lines" is troubling me. They draw a line with the line segment and then draw another line coming out the anchor point at an angle.

    Here's where it is troubling me - when I try to drag a line to the anchor point trying to transform the first line, I drew. (the line cursor turns into a selection tool) I can't draw another line connecting the first.

    Advice would be great because it's driving crazy me.

    See you soon,.
    Kyle

    Yes, it is irritating. You must clear the previous line first. If you want to make sure that both ends are perfectly aligned, start by turning on the guides. If you want two lines to be part of the same way, you should use the tool pen instead.

  • I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good

    I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good overall. I export it to JPEG, max quality with the establishment of reference standards. I then open the image and it seems fine, as it did in photoshop. My problems begin to occur when I try to download on Twitter as my profile picture. I tried downloading from my office directly on the site via google chrome. When I download the image then begins to have jagged edges and overlooks the tablets. So I thought it was some performance settings, then I tweaked them and restarted a couple of times and still the same result. He would go on my desk but when uploaded to twitter as my profile picture is horrible. So I tried emailing the image of myself and the download through my phone. I opened the image on my iphone and it seemed fine as he did on my desktop but when I downloaded the image it makes then look blurry. I had this problem when downloading photos Twitter via my iphone, so it doesn't surprise me. I have read different forums saying: you must download it from the office, so I thought it would work like this. This could be a problem of twitter than compresses uploaded photos? Other people can do very much the same way, but it does not work for me. Please someone help me before I put my computer in an oven microwave.

    This could be a problem of twitter than compresses uploaded photos?

    Yes. The rest, we can answer. You wrote a lot, but very little discussion. Instead of accurate information you lose yourself in the vague descriptions. Screw color management to the wrong dimensions that trigger resizing server-side it could be any number of things here.

    Mylenium

  • I want to delete after the line that I m using the script... COIL is not used here

    Hi team,

    1.SQL * more: Production release 11.2.0.3.0 on Mon 19 Nov 08:47:36 2012
    2.
    3 Copyright (c) 1982, 2011, Oracle. All rights reserved.
    4.
    5.
    6. connected to:
    7 oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
    8. with the options of partitioning, OLAP, Data Mining and Real Application Testing
    9.
    SQL > SQL > 2 3
    NAME LOG_MODE INVALID_OBJECTS INVALID_ n/a _INDEXES invalid triggers broken jobs block Corruption
    --------- ------------ --------------- ------------------- ---------------- ----------- ----------------
    DBAS ARCHIVELOG 530 530 6 16 0
    10.
    11 SQL > SQL > disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
    12. with the options of partitioning, OLAP, Data Mining and Real Application Testing



    I'm not above numbered line: i 1-9 and 10-12 to appear when cannot connect to sqlplus, please suggest how to turn them off and I need just of data between people. That is to say one line 11/12/13

    You can also do:

    (1) create a file with to call the script from the sql code:
    .. /.. /.. /sqlplus s username/password @... /... /.. /.. / test. SQL

    (2) create the code sql script:
    .. /.. /.. /.. / test. SQL

    Select * twice;

    and you will get:

    D
-
X

Maybe you are looking for