The triggered alarms and Notification by Email
Hello. Where can I configure the notification email for alarms triggered in VirtualCenter? Help, please. Thank you for your time.
Find the object that contains the definition of the alarm. Change the settings of the alarm, go to the Actions tab, click Add at the bottom, select e-mail notification in the action and email in the value. Before you do this, you must make sure that SMTP is enabled. To do this, change the configuration of the server virtual center management, go to the mail section and add your mailhost and on behalf of the sender.
-KjB
VMware vExpert
Tags: VMware
Similar Questions
-
Purpose of the triggered alarm
Hello
I am trying to create a script that sends an email with all the daily alarms from VMware. I did everything, but the part that identifies the object that is actually in a State of alarm. I use the code below I've seen in other similar questions, but I can't find anything in the SDK that will produce this object. I can get it only to point to the object where it is actually defined. Am I missing a property which will produce who or what I have to drill down to each object in the inventory and check for alarms triggered?
$vcenter = "vcntr01".
SE connect-VIServer $vcenter
$datacenters = (get-data center * | get-View)
{foreach ($datacenter to $datacenters)
foreach ($triggered in $datacenter. TriggeredAlarmState) {}
$alarmDef is get-view-Id $triggered. Alarm
Write-Host "$((get-vue_$alarmDef.Info.entity).name) $($alarmDef.Info.Name).
}
}
Thank you!
Try like this
Get-Datacenter | where {$_.ExtensionData.triggeredAlarmState} | %{ $_.ExtensionData.triggeredAlarmState | Select Time, @{N="Entity";E={Get-View $_.Entity | Select -ExpandProperty Name}}, @{N="Alarm";E={Get-View $_.Alarm | Select -ExpandProperty Info | Select -ExpandProperty Name}}}
-
When to go to the Orange homepage and log in emails, get a white blank page.
Original title: my e-mail page is empty
When I go to the Orange homepage and sign in to my email, I get only a blank white page.
Hi AvzGaz,
1. what web browser do you use?
2. This only happens when you use emails Orange?
3. have you been able to connect to Orange before emails without any problem?
4. did you of recent changes to the system?
You can view the following support Orange link and check if it helps.
Webmail - I have problems signing in Webmail
If you are facing problems with the Orange mail, you could get in touch with Orange for additional assistance:
http://help.Orange.co.UK/orangeuk/support/personal/contacting_us?link=footer_contact_us
-
When I open "Select icons and notifications appear in the task bar" one of the things it lists is "GLBD565.tmp" which seems to be left by the installation of a software product. The icon is not active and I doubt if it still exists, but it appears in the list. That list is maintained and how to remove the dead of her spots?
The entries to Customize Notifications cannot be removed selectively. You can, however, clear the set lists by using the following registry change.
Click Start, type regedit in the Search box and press ENTER.
- Locate and then click the following registry subkey:Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify HKEY_CURRENT_USER
- In the Details pane, click the IconStreams registry entry.
- On the Edit menu, click delete, and then click Yes.
- In the Details pane, click the PastIconsStream registry entry.
- On the Edit menu, click delete, and then click Yes.
- Exit Registry Editor.
- Restart the Explorer.exe process. To do this, follow these steps:
- Press CTRL + SHIFT + ESC.
- On the process in the Task Manager tab, click the process explorer.exe and then double click on end process .
- On the file menu, click new task (run), type Explorer and click OK.
- Exit Task Manager.
(c) Microsoft Corporation
-or-
Download and run a VBScript script that automates the steps above.
How to delete items from the Notification area in Windows 7/Vista/XPRamesh Srinivasan, Microsoft MVP [Windows Desktop Experience]
-
I think that I asked the question as best as I can. On Internet Explorer, I could click at the bottom right and move from 100% to 150%.
Given my view, this change would be extremely useful.
Hi dsbloom65,
You can try using the Zoom. This will decrease the size of everything on the page. You can try to hit CTRL and + a few times to try it. CTRL and 0 it will return to normal size.
If this isn't what you're looking for, you, you might want to look at some of the options in Firefox Accessibility features - make Firefox and web content work for all users . There is much good information in this article.
Hope this helps!
-
In the support section, explains that when that you delete the POP account you must move the files of electronic mail to the local folder before deleting because if you do not, this process is not easily reversible. So I hope someone can help this fool who does not do and that I can somehow retrieve old emails, because it implied that they cannot be definitely missing still.
_ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Recover_Deleted_Account
-
Windows 7 - lack of power icon in the status bar and notification Bar
Hello
My power (battery) indicator icon is missing from my taskbar and also "it does not appear in the notification area. I use Windows 7.
Can you help me?
Thank you.
HM
Hello
This should help you:
"How to enable or disable the system icons on the taskbar in Windows 7 and Windows 8"
http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html
See you soon.
-
BlackBerry Z10 need help with the facebook chat and notifications
Hey, guys.
Since I updated to version 10.2.1.2102 of the software I was not able to receive messages from the hub of blackberry facebook chat. Before the update whenever I had my phone connected to a wireless network it was automatically getting messages facebook on the hub. Now, although I can send messages and receive messages if this contact is online, once I close the conversation hub is gone and I don't get the messages, only the "new messages of * person *" e-mail after a certain time.
In addition, I don't get notifications about birthdays of the people. I get the "next event" x hours notification on the lock screen, if I go in the calendar I see the notification at the top of the page, but it does not sound to warn me of my birthdays from the contacts.
Can someone help me with this two problems? Thank you!
Fact. I needed to update the facebook app.
-
Add the date in the name of the output file and settings to email body
Hello
Anyone has idea how to add to the name of the output file?
Second question: maybe who knows how in Planner put parameters in email body?Matt
I found the solution. I used the wrong column with a value constant and later used burst (deliver and divide by this column). Useful: https://docs.oracle.com/cd/E21764_01/bi.1111/e18862/T527073T555155.htm https://community.oracle.com/thread/606864?tstart=0
-
Impossible to connect to the smtp server and send an email using javamail.
Hi all
I am struggling with sending e-mail with javamail api.
I've visited a few forums but not be able to solve the problem then post here.
Details of the situation are:
1 SMTP - to which we are able to connect with telnet and able to send emails that work even between the firewall.
2 tried to disable IPV6 from my windows machine 7 after reading something - java tries to connect to smtp with IPV6 and it should be disabled so that javamail work.
3 has tried to run the same code to a linux environment. in this environment, we are also able to connect to the smtp with telnet server and send mail
the code I have tried is below.
import java.util.*; import javax.mail.*; import javax.mail.internet.*; import javax.activation.*; public class SendEmail { public static void main(String [] args){ String to = "[email protected]";//change accordingly String from = "[email protected]";//change accordingly String host = "smtp.somthing.com";//or IP address //Get the session object Properties properties = System.getProperties(); properties.setProperty("mail.debug", "true"); properties.setProperty("mail.smtp.host", host); properties.put("mail.smtp.starttls.enable", "false"); //properties.put("mail.smtp.port", "25"); //commented as its by default takes 25 Session session = Session.getDefaultInstance(properties); ////compose the message try{ MimeMessage message = new MimeMessage(session); message.setFrom(new InternetAddress(from)); message.addRecipient(Message.RecipientType.TO,new InternetAddress(to)); message.setSubject("Ping"); message.setText("Hello, this is example of sending email "); // Send message Transport.send(message); System.out.println("message sent successfully...."); }catch (MessagingException mex) {mex.printStackTrace();} } }
I get the errors are
DEBUG: JavaMail version 1.4.7 DEBUG: successfully loaded resource: /META-INF/javamail.default.providers DEBUG: Tables of loaded providers DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Oracle], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Oracle], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Oracle], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Oracle], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Oracle], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Oracle]} DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Oracle], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Oracle], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Oracle], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Oracle], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Oracle], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Oracle]} DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Oracle] DEBUG SMTP: useEhlo true, useAuth false DEBUG SMTP: trying to connect to host "smtp.something.com", port 25, isSSL false Exception in thread "main" java.lang.RuntimeException: javax.mail.MessagingException: Could not connect to SMTP host: smtp.something.com, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect at emailer.SendMail.main(SendMail.java:64) Caused by: javax.mail.MessagingException: Could not connect to SMTP host: smtp.something.com, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1961) at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:654) at javax.mail.Service.connect(Service.java:295) at javax.mail.Service.connect(Service.java:176) at emailer.SendMail.main(SendMail.java:58) Caused by: java.net.ConnectException: Connection timed out: connect at java.net.DualStackPlainSocketImpl.connect0(Native Method) at java.net.DualStackPlainSocketImpl.socketConnect(Unknown Source) at java.net.AbstractPlainSocketImpl.doConnect(Unknown Source) at java.net.AbstractPlainSocketImpl.connectToAddress(Unknown Source) at java.net.AbstractPlainSocketImpl.connect(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:321) at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:237) at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1927) ... 4 more
someone had a problem like this?
suggestions are welcome...
The server I used was not accessible from the telnet command or java code.
However when I telnet to the server it was implicitly redirected to another server that I failed to notice.My sincere apologies to all
I'll take more precautions before posting and check the facts in more detail. -
Run for the triggered alarm settings
Hello.
I set an alarm to call a script whenever a virtual computer is vMotioned with the following code:
My $alarmScript = "C:\event-reporter.bat";
my =::get_service_content()-> alarmManager Vim $alarmMgr;
my $alarm = Vim::get_view (mo_ref = > $alarmMgr);
My $alarmExpr = EventAlarmExpression-> new (eventType = > 'VmMigratedEvent');
My $alarmAction = RunScriptAction-> new)
script = > $alarmScript
);
My $alarmTrigger = AlarmTriggeringAction-> new)
action = > $alarmAction,
red2yellow = > 1,
green2yellow = > 1,
yellow2red = > 1,
yellow2green = > 1
);
My $alarmSpec = AlarmSpec-> new)
name = > 'VM vMotioned. "
Description = > "Trigger to run the VM startup script."
activated = > 1,
expression = > $alarmExpr,
action = > $alarmTrigger,
);
My $newAlarm = $alarm-> CreateAlarm (entity = > $vm, spec = > $alarmSpec);
I would like to improve this alarm from the run settings to the script during the VM migration, more specifically the IP address to the accommodation ESX host recently migrated VM. I know that using the ActionParameter constants, you can spend TIME info, but I don't know if it is possible to pass information of the object (VM), the alarm is associated.
Thank you.
Juan Aristizabal.
The "ActionParameter" provides only a set of constants whose value is replaced by the processor of the action with the performance values. You will not be able to pass a custom constant whose value can be substituted for the IP Address of the host (in your case).
-
How to remove the Message ID and reference of emails
When I send a message or a message, I want to receive way back, received-spf, X-google-dkim-signiturer-x-gm-message-etat
View | Headers | Normal. Yours is, in my view, a value of "All".
No menus? http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html
-
wireless network icon has disappeared from the State system and the notification bar
wireless network icon disappeared from the tray system and notifications (that is to say, it is no longer a wireless icon by the clock where I can see networks, connect to the network, or see the strength of the network). How to bring back icon?
See the following article: http://support.microsoft.com/kb/945011. It should help to solve your problem.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
My husband touched something and my usual position for the start icon and notification bar went to another location. I want to the bottom of the screen where it has always been. I tried all the 'tools' that I could find, and the suggestion was to drag. It does not work. Help!
Hello kenpam,
You can 'unlock' before you drag.
http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar
Unlock and move the taskbar
Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.
TaskbarTo unlock the taskbarRight click on a space empty in the taskbar. If a check mark next to him doesn't lock the taskbar , the taskbar is locked. You can unlock it by clicking lock the taskbar, which removes the check mark.
NoteTo lock the taskbar into place, right-click an empty space in the taskbar and then click lock the taskbar , so that the box is displayed.
To move the taskbarClick on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.
-
Custom event is not captured by the Task Scheduler and unable to trigger by e-mail for the event
Hello world
We have installed the 9.0 table in our windows 2008 R2 server and Scheduler tasks to send if you find error occurred for the application in it. That's why we created SMTP inside. First, we have implemented the Task Scheduler and generate an error in the application of the table and run the task manually and we receive by e-mail. But when we go for automation by the custom event. The steps below that I follow:
1. click the Start button, and then select administrative tools > Task Scheduler.
2. click on the task of creating in the Actions pane on the right.
3. in the dialog box create a task in the name text box, type a name for the task and provide a description if you want.
4. in the section security options, select run whether user is logged in or not.
5. click on the triggers tab, and then click the new button.
6 to start the task drop-down list, select an event.
7. in the settings section, select custom and click the new event filter.
8. for the event level, select the error box.
9. selection of the Source, in the event source drop-down list, select the table server checkbox.
10. click OK to close the new dialog box even filter and then click OK again to close the new trigger dialog box. The event trigger is now configured.
11. in the dialog box create a new task, click the Actions tab and click the new button.
12. in the Action new dialog box, in the drop Action, select send e-mail.
13. under the settings section, fill in the form as required, including the SMTP server.
Note: It is necessary to enter the valid e-mail addresses in the From and to text boxes.
14. click OK to close the new dialog Action.
15. click OK to close the dialog box create a task and finish configuring e-mail alert.
If please see this and feel free to contact me if you have any information.
Concerning
Valerie
Mob: 469 345 3625
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)*
Maybe you are looking for
-
VS 2012 Windows 7-based Application crashes on Windows Server 2012
A generated application on a Windows 7 machine does not work on Windows Server 2012 but works fine on other desktops. An exception of type "attempted to read or write protected memory. It is often an indication that other memory has been corrupted. "
-
Allright here is some experience of what has happened so far. There are several games that I play with my new computer windows vista laptop. I can play Starcraft BW without any problem. When I got the laptop, I was able to play Guild Wars without any
-
How to get the PIN NUMBER in decimal format?
I was wondering if there was a way to get the PIN device in decimal?
-
Error to get blackBerry Smartphones when you log in to the blackberry app world
Hi I have a problem with the blackberry app world when I try to download from blackberry app world it ask to connect with blackberry ID but when I connect it says an error has accurred and I have to try again what can I do?
-
need to reset password do not know how?
don't know how to get my password, or how to change it as I said. and also, they say that I have an e-mail that if a problem it is. This address is also on the Gmail. ? my little son said that he who canceled because I don't use it that much