the user gets after warning when opening document "cannot handle the request because a modal dialog box or warning is active.

This occurs after the user connected to the mac Server network share and open an Indesign document.

The user has the right to full user for the network share and all documents.

This warning means that there is an open dialog box (in this case most likely off the screen or hidden behind something else).

Tags: InDesign

Similar Questions

  • Cannot process the request because a modal dialog box or the alert is active

    I can't work for the life of me why I get this message when "cannot process the request because a modal dialog box or the alert is active. I simplified my code to reproduce the problem.

    All I want to do is have a dialog box that allows me to edit items on the page... But it does not seem to allow it. I must be missing something simple.

    var selection = app.activeDocument.selection[0];

dialog = new Window('dialog');

var button = dialog.add('button', undefined, 'Resize');

  button.onClick = function() {

  selection.geometricBounds = [0, 0, 10, 10];

};

dialog.show();

    If you use 'dialogue', then you must leave the modal state to interact with the app was done by closing the dialog box.

    var w = new Window('dialog');
var v = w.add ('edittext');
var b = w.add('button');
b.onClick = function(){
    w.close(1);
}
if (w.show()==1) alert (v.text);

    Or switch to modal MOM like brother suggested dialog boxes...

    Loïc

    Ozalto | Productivity-oriented - Loïc Aigon

  • process on the main window to stop running after the closure of a modal dialog box

    Hi everyone, I am new to Oracle Forms so any help would be appreciated.

    Here's the scenario: I'm on MY_MODALESS_WINDOW and run a trigger that looks like:

    ================================
    execute_trigger ('TRIGGER_1');
    If form_failure then goto FAIL; end if;

    show_window ('MY_MODAL_DIALOG');
    synchronize;
    raise form_trigger_failure;

    execute_trigger('TRIGGER_2);
    If form_failure then goto FAIL; end if;

    < < FAIL > >
    null;

    ================================

    -No error in compilation.
    -Here is the number: TRIGGER_2 has never been called/executed after the closure of the MY_MODAL_DIALOG?

    Thanks again,

    Published by: user12216598 on March 12, 2010 09:07

    As I said before, open a modal window does not stop execution of the current procedure. If you need this behavior, put your modal window and all its components in another form module and use CALL_FORM to open this form. Then the execution stops at the CALL_FORM statement and and will continue after the CALL_FORM when you leave the form called.

  • How to remove "modal dialog box or alert" when the script is underway?

    Hi all

    I've created a script that will set the text of the rtf files from a folder to a document on a different page based on the correspondence. But if a font which was in doc file but absent on my mac, showed an error when running the script.

    This means that Indesign has opened a missing alert police box and script stop to this line and the error shows "cannot process the request because a modal dialog box or the alert is active.

    Is possible to remove this error and the script is continue to place all RTF files? I have little knowledge of try/catch.

    indesign #target

    myDoc var = app.documents.item (0);

    sourceFolder var = Folder("/Users/admin4/Desktop/ec_txt");

    myFiles = sourceFolder.getFiles ("*.rtf");

    var myFrame1 = myDoc.pageItems.itemByID (111076);  Switzerland

    var myDoc.pageItems.itemByID = myFrame2 (111114);  euro area

    var myFrame3 = myDoc.pageItems.itemByID (111146);  Germany

    for (var i = 0; i < myFiles.length; i ++)

    {

    switch (myFiles [i].name.slice (6, myFiles [i].name.lastIndexOf ("_")))

    {

    case 'Switzerland_en ':

    myFrame1.parentStory.insertionPoints.item(-1).place (file (sourceFolder + "/" + myFiles [i] .name))

    break;

    case 'Eurozone_en ':

    myFrame2.parentStory.insertionPoints.item(-1).place (file (sourceFolder + "/" + myFiles [i] .name))

    break;

    case 'Germany_en ':

    myFrame3.parentStory.insertionPoints.item(-1).place (file (sourceFolder + "/" + myFiles [i] .name))

    break;

    }

    }

    To remove alerts, you can use different levels of user interaction.

    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;

    Not forgotten to reset after the end of the script with the following:

    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;

    Hope it resolve your request.

    --------

    Green4ever

  • Position of the modal dialog box

    Hi,.

    Could someone explain to me how the op i tion to the wide a modal dialog is calculated?

    I put the height of my modal dialog box to 780px (all of the page of the dialog box is displayed), and the modal dialog box is displayed at the top of the window:

    780px.PNG

    A user complains that the modal dialog box is located roughly halfway to the window and having to drag upward to display all items and buttons.


    After you change the height to 600px, I get the same answer (the modal dialog box is about to halfway through the window) on my environments: different types of MacBook (Air/Pro), a window PC, all modern browsers.

    600px.PNG

    Then sometimes (how SMART is that! ) ) the modal dialog box (with the height value 780px) is positioned at the top of the page, sometimes the top less x.


    Thank you


    Jos

    Thanks John:

    Hello

    Thanks John: How to persist APEX dialog size and position. HardLikeSoftware

  • interaction of the modal dialog box with master apex 5

    Hello

    Apex 4.2 that my links has been built with sql only for the specified lines, links point to event opening the modal dialog box.

    Can you tell me how should I format link to open the modal dialog box for interactive report?

    Hi jareeq,

    jareeq wrote:

    Apex 4.2 that my links has been built with sql only for the specified lines, links point to event opening the modal dialog box.

    Can you tell me how should I format link to open the modal dialog box for interactive report?

    Please see the example of a modal dialog box of region in sample dialogue is available in packaged Application.

    This will give you an idea how to call a modal dialog box for interactive report link.

    or better create sample on apex.oracle.com which will be easier for users to give you the appropriate solution.

    Kind regards

    Jitendra

  • How to set the location of the display of the modal dialog box?

    Hello

    Setting the height of a modal dialog box seems to influence the position of the modal dialog in the window.

    (See also the Position of the modal dialog box)

    If anyone can confirm this? And if so, how can I handle it?

    Thank you

    Jos

    Hello

    Thanks John: How to persist APEX dialog size and position. HardLikeSoftware

  • Why do I get restore window when opening firefox since the update

    Why do I get restore window when opening firefox since the update. I don't want to restore but it appears every time instead of my homepage as shown

    A likely cause is that you first close all Firefox Windows and then close the Firefox application.

    Some noted that closing of Firefox (Firefox > Quit) while the browser window is always open works for them.

    • Bug 845681 - close all windows and abandonment of Firefox eventually led to about: sessionrestore to appear the next time you start

    (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

  • How do you get a password to open document

    How do you get a password to open document

    Hi blackwell78,

    You need Acrobat to apply a document password. Please see Acrobat help. Securing PDF files with passwords for more information.

    Best,

    Sara

  • Article not saved when the item is in a modal dialog box of jquery

    Hi all


    I followed the instructions here:
    http://shijesh.WordPress.com/2010/04/10/jQuery-modal-form-in-Apex-4/
    to create a modal jquery dialog, this is the code that I added in the html header:
    <link rel="stylesheet" href = "http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/
redmond/jquery-ui.css" type="text/css" />

<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.js"> </script>
<script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/jquery-ui.js"> </script>
<script type="text/javascript">
$( function() {
   $('#ModalForm').dialog(
   {
        modal : true ,
        autoOpen : false ,
        width : 425,
        closeText : 'Close',
        stack : false,
        resizable : false,
        buttons  : {
            Cancel : function() {
                     closeForm();
                } ,
            Save : function() {
                updateMEMOVELD();
            }
                   }
   });
});

function openForm()
{
    $('#ModalForm').dialog('open');
}

function closeForm()
{
    //$('#ModalForm input[type="textarea"]').val('');
    $('#ModalForm').dialog('close');
}

function updateMEMOVELD () 
{
   var get = new htmldb_Get(null, &APP_ID.,    
                    'APPLICATION_PROCESS=f_memo', 0);
   get.add('P9_MEMOVELD',$v('P9_MEMOVELD'));
   var gReturn= get.get();
   //alert(gReturn);
   //alert($v('P9_DATUM'));
  $s('P9_MEMOVELD',gReturn);
  alert($v('P9_MEMOVELD'));
  $s('P9_MEMOVELD_COPY',$v('P9_MEMOVELD'));  
  $('#ModalForm').dialog('close');
}
</script>
    my situation is a little different, my modal doesn't have to perform a sql update, just to change a field
    the user will then record in the main form
    for some reason any field never gets updated in the db
    I even created an application on the application called f_memo process:
    BEGIN
  APEX_UTIL.SET_SESSION_STATE('P9_MEMOVELD',:P9_MEMOVELD);
  htp.p(:P9_MEMOVELD);
END;
    Why my domain is not send to the db?
    It works when I remove this from the header of the region:
    < d i v id="ModalForm" title="Add Person" style=" d isplay:n one  "   >
    but then of course I have more a modal dialog box



    What's wrong?


    I put the code online at apex.oracle.com
    workspace XONIXRS
login/password demo/demo
    Run the application
    Click lijst (invoices) without (in the region of the right sidebar)
    Then click on the button Search (search)
    a report is displayed, click on edit on the first line (200900017)
    now, a form appears, click the memo of pure and simple button
    now the modal shows upward, change the field and click Save
    Click ok (for warning) and then click on save the invoice
    you stay on the same page
    Now click on town
    and then click on edit on the first line (200900017) new
    then click on note even once, you will see that the memo has not been changed

    How comes?

    KR
    Martin

    The problem is that the creation of a region of a modal rise this area of the html code. Take a look at the DOM when you run your page and not the html source code, because that does not reflect the changes to the DOM is the loading of the page. This means that your memo field is far from the FORM tags and actually only submit to the session state. The issue is not addressed when you send page! You can follow through your debugging page. Memo is not saved and untreated.
    Try saving the value of session state is not enough, it does not really matter in this case. The time that you submit the page, session state is crushed by the submitted values of the elements.
    So what I did:


    • Move P9_MEMOVELD to the FACTUUR region, as well as all other db fields

    • change the type of hidden

    • the protected value not

    • in modal region to create a new page P9_MEMOVELD_POP, type textfield element

    • Set the source to always use a page element as a source, with the source P9_MEMOVELD

    • change of function updatememoveld:

      function updateMEMOVELD ()
{
   /*
   var get = new htmldb_Get(null, &APP_ID.,
                    'APPLICATION_PROCESS=f_memo', 0);
   get.add('P9_MEMOVELD',$v('P9_MEMOVELD'));
   var gReturn= get.get();
   //alert(gReturn);
   //alert($v('P9_DATUM'));
  $s('P9_MEMOVELD',gReturn);
  alert($v('P9_MEMOVELD'));
  $s('P9_MEMOVELD_COPY',$v('P9_MEMOVELD'));
  */
  $s('P9_MEMOVELD',$v('P9_MEMOVELD_POP'));
  $('#ModalForm').dialog('close');
}

      If you want or need the session state as a whole belongs to you, it depends on if you are using this also dynamically on the page and therefore to influence results, but I don't think it will be (it's a Memo field...)



    Additional notes:

    • Be careful with the jquery libraries! The standard libraries are included, but you add previous versions too! 1.4.2 this could cause problems of...

    • Use your models better. Why did you would wrap a region in the div tags? Change or add a model of region to be DIV tags You can then easily assign a static id in this region and target. This will save you from enveloping the wrappers wrapped (cause it is what looks like the code that is generated in the end).

  • Dialog boxes that are not active until the user clicks

    When I click on anything that opens a dialog box in Windows 7 Home Premium (version 6.1), I then have to click the dialog box to make it active.  An example is an Excel file protected by password... when I opened the file, the password used to be active for me box so I can just type the password and press ENTER... now I have to first click on the box.
    It started a while ago and more of a nuisance than anything else... I hoped that it could be corrected in an update of Windows, but so far nothing has changed, which leads me to think that I need to change something about myself.  I have reset my keyboard and mouse settings by default, but that made no difference, so I'm open to suggestions!
    Thank you
    Kim.

    Hi Kim,

    Follow the troubleshooting methods listed below.

    Method 1: Run a SFC scan.

     

    Sfc/scannow will inspect all the important Windows files on your computer, including the Windows DLL files. If the System File Checker detects a problem with any of these protected files, it will replace it.

    Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

    http://support.Microsoft.com/kb/929833

    Method 2:

    Follow the steps below.

    (a) open registry, click Start, type regedit and press ENTER.

    (b) locate the key:

    HKEY_CURRENT_USER\Control Panel\Desktop

    (c) on the right pane right-click on the following key and choose Edit:

    (d) ForegroundLockTimeout

    (e) select decimal Base and enter 0 (zero) in the value data box, and then click Ok.

    (f) out of the registry and restart the computer.

    Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    You can also see the question in a new user account. If you have a new user account, and then connect to that, or else you can create a new user account, and then check. Follow the steps below.

     

    Create a user account

    http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-7

    Write to us at the State of the question. We will help you to come.

  • APEX 5.0 after you close a modal dialog box, I want to introduce the parent page, without losing session values

    I have a parent page that triggers a modal dialog box in APEX 5.0. When the user confirms in the dialog box, it closes the dialog box by using the process of dialogue.

    In the parent page, if I do not have a dynamic action "Dialog box closed", the user returned to page with the values, they recently came again here. If I add a closed action dialog box to send the page, the values are lost - it's as if the page refreshes before submitting. Someone knows how to solve this problem.

    Thank you.

    user3282753 wrote:

    Please update your forum profile with a recognizable username instead of "user3282753": Video tutorial how to change username available

    Also, is it possible to display the success message from the Page of the dialog box without updating the parent page.

    See Roels Blog: display a success message after you close a modal dialog box

  • Have 12 items. Many worked on 8.1, my new laptop has Windows 10. Now the elements photo editing software will open the image in raw, but once I did my settings and try to 'open image', it tells me it "cannot complete my request because an error occurred."

    Well, I typed my question in my title.  I have had absolutely no problem under windows 8.1 to 12 items, but unfortunately the death of my laptop could not be repaired, so I had to get a new 8.1 one and that time windows was no longer available on the laptop I wanted. Who would have the go-getter, comparable to my old and able to handle my photography.  SO I have an I7 processor 2.6 Ghz with 6 MB of cache and 16 GB of Ram with Windows 10 64-bit operating system.

    As indicated above, while the Publisher will open the photos in camera raw, once I made my changes and try to "open image" I get the message he, "it cannot complete my request because an error occurred." I tried uninstalling and reinstalling several times with the same results.  I made also all updates have been made. About 10% of the time, it will open up the photo, but then when I try to record it says that I don't have enough memory.  Do not know how this can be, this configuration of the computer is basically the same as my other, only difference is windows 10.  Not even close to a full hard drive. No other program running. Help!

    reset your preferences - https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  • How can I open the "Convert to indexed colors" dialog box with custom presets?

    Hello

    I need to automatically open the "Convert to indexed colors" dialog box in Photoshop. Before and after that I have a few scripts that are running, so it is not possible to open the dialog manually. Also, I want to put some custom presets (like the number of colors, etc.).

    Find something similar to what I want for the color range selection (opens the dialog with the presets you put in that):

    function colorrange(enabled, withDialog, fuzziness) {
    if (enabled != undefined && !enabled)
      return;
    var dialogMode = (withDialog ? DialogModes.ALL : DialogModes.NO);
    var desc1 = new ActionDescriptor();
    desc1.putInteger(app.charIDToTypeID('Fzns'),fuzziness);
    var desc2 = new ActionDescriptor();
    desc2.putDouble(app.charIDToTypeID('Lmnc'), 31.22);
    desc2.putDouble(app.stringIDToTypeID("a"), 0.86);
    desc2.putDouble(app.stringIDToTypeID("b"), 0.31);
    desc1.putObject(app.charIDToTypeID('Mnm '), app.charIDToTypeID('LbCl'), desc2);
    var desc3 = new ActionDescriptor();
    desc3.putDouble(app.charIDToTypeID('Lmnc'), 95.34);
    desc3.putDouble(app.stringIDToTypeID("a"), 54.59);
    desc3.putDouble(app.stringIDToTypeID("b"), 49.85);
    desc1.putObject(app.charIDToTypeID('Mxm '), app.charIDToTypeID('LbCl'), desc3);
    desc1.putInteger(app.stringIDToTypeID("colorModel"), 0);
    var desc4 = new ActionDescriptor();
    var desc4 = executeAction(app.stringIDToTypeID('colorRange'), desc1, dialogMode);
  };

    How can I get the same thing for the indexed color conversion dialog box? Apart from doing a lot of guessing about the stringIDs.

    Is there some kind of "table of choice" for char and string ID?

    Guys thank you very much in advance! This forum has been a great help on several occasions.

    OK never mind I got it, stupid me.

    He has recorded with Listener Script and changed the "DialogMode" parameter of the function of executeAction "DialogModes.No" at "DialogModes.All".

    var idCnvM = charIDToTypeID( "CnvM" );
            var desc249 = new ActionDescriptor();
            var idT = charIDToTypeID( "T  " );
                var desc250 = new ActionDescriptor();
                var idPlt = charIDToTypeID( "Plt " );
                var idClrP = charIDToTypeID( "ClrP" );
                var idSele = charIDToTypeID( "Sele" );
                desc250.putEnumerated( idPlt, idClrP, idSele );
                var idClrs = charIDToTypeID( "Clrs" );
                desc250.putInteger( idClrs, 4 );
                var idFrcC = charIDToTypeID( "FrcC" );
                var idFrcC = charIDToTypeID( "FrcC" );
                var idNone = charIDToTypeID( "None" );
                desc250.putEnumerated( idFrcC, idFrcC, idNone );
                var idTrns = charIDToTypeID( "Trns" );
                desc250.putBoolean( idTrns, false );
                var idDthr = charIDToTypeID( "Dthr" );
                var idDthr = charIDToTypeID( "Dthr" );
                var idDfsn = charIDToTypeID( "Dfsn" );
                desc250.putEnumerated( idDthr, idDthr, idDfsn );
                var idDthA = charIDToTypeID( "DthA" );
                desc250.putInteger( idDthA, 75 );
            var idIndC = charIDToTypeID( "IndC" );
            desc249.putObject( idT, idIndC, desc250 );
        executeAction( idCnvM, desc249, DialogModes.ALL ); //Change from NO to ALL

  • How to open a modal dialog box of click of a button on the Panel?

    Hi all

    I tried to open a modal dialog box on the click of a button on the Panel the other day. But failed. I managed to have a panel appear on click of a button. But the Group appeared at the forefront of the parent panel. I don't want to. Here are some screenshots of what I managed to do and what I want to do.

    This Panel will appear on the click on the button "Click." Note that the child Panel cannot be moved outside the bounds of the parent panel.

    1.JPG

    Instead, I want the behavior of the child Panel as shown below. As the modal dialog box that appears when we create a new action game in the Actions Panel.

    2.JPG

    This Panel can be moved all around the application window. Kindly guide my way through from there to achieve.

    Thank you!

    Post edited by: poortip87

    You can open a modal secondary window like this:

    var w: Window = new Window(); A mx:Window, or your own subclass

    w.type = CSXSWindowTypes.MODAL_DIALOG; in the package com.adobe.csxs.types

    w.Open ();

    There are up to four types of different windows that you can open in the form of secondary windows, although not all are currently available in all products.

    HTH

    David.

Maybe you are looking for