The user profile does not load at startup - vista help
When I turn on my computer and choose me as the user (which is the only user he is listed on the computer), I get an error messgae saying: unable to load the user profile...
How can I fix it?
Thanks much for the ideas! really enjoyed
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not work:
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
The user profile does not load correctly
Running Vista Ultimate. I have 2 user accounts, the two administrators. If a user remains logged on for any period of time (more than 10 minutes), disconnects, and then another user logs on, they will get the dreaded "your user account is not load correctly."
A reboot always restores the afflicted user account. Web an extensive search doesn't have all the solutions near mine.
Examined the msgs of following error in the application event log: 1511 1515 WARNING WARNING 1502 1508 error. This just started recently.
Appreciate your help.
Have installed kaspersky AV and media center tv pack units.
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the updated Google (if you've added the Google toolbar, Chrome or the z
Google Earth) has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with
a temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you can't access your old account you can still use an Admin to migrate to a new
(remember to always leave an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
The user profile does not load
I received the message, the service user profile Service does not logon, user profile cannot be loaded. How can I fix?
I received the message, the service user profile Service does not logon, user profile cannot be loaded. How can I fix?
You have another admin account, you can connect?
If so, please do it and then run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.In the window to logon safemode, you see another admin next to your account? If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft Support below.
Tutorial from Microsoft support :
There are several methods, go through one by one.
Method 3 has a "fix it for me" application
http://support.Microsoft.com/kb/947215For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
User profile does not load correctly, the user could not be connected.
I tried to login to my account to administrator with my correct password and it says "user profile can be connected, user profile does not load correctly ' or something to that effect. Even when I login as a guest and enter my admin password on the user accounts settings and click ok, it won't let me access or modify accounts. Please help me, I am not able to access one of my documents or pictures of my guest account.
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
I am the administrator on my pc. and my user profile does not load.
recently, when I connect I get a message saying that the user profile does not, or will not, support. How can I fix it? Be admin, I can't make all the changes that my profile does not load. I can connect with my husband and children, as their loading user profiles, but, when I try to make changes and type my password properly, it won't connect so I can't do anything! Help! Thank you!
Yes, you will lose everything when you re-install.
If you are able to logon to an account that can back up personal files as much as you want to keep on an external hard drive, or Flash drives or DVDs.
You will need to re - install all the programs you already have installed.
-
original title: user profile
. When in safe mode, I see all my apps, but in normal mode, it does not load properly.
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
The user profile does not properly
Turning on my computer these days, I get a message that says:
Your user profile was not loaded correctly: you have been logged on with a temporary profile, the changes you make to this profile will be lost when disconnected. Please see the the event log for more information or contact your administrator.
I have Windows vista, SP2 on my toshiba computer
I'm not the most computer intelligent person, but in this case everything that has been saved on my computer such as photos, music, etc. is not on the computer. Anyone have suggestions on what to do or try on this message.
Thank you
Toshibasheila
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).These problems and similar bugs can help:
A temporary profile is loaded after you connect to a Windows Vista-based system
http://support.Microsoft.com/kb/947242How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlSome programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html-----------------------------------------------
Try these to erase corruption in the case where it plays a role.
1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/9282283. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Other methods:
Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
accounts that may be difficult. If necessary you can also reset your password in the accounts.
Do not forget to leave your Admin account and the other to the desired level.Make another Admin account with your password and use it to fix the others if necessary. (just for
repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlYou can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
my user profile does not load correctly
my user profile does not correctly load system continues to connect with a temporary file. All I had on my screen disappeared! How can I get that back as it was? I tried to restore to an earlier time, but no luck.
Hello
Check this box:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
Does that help?
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
The user profile was not loaded correctly___
My profile does not load correctly! It sends me to a temporary profile... and I can't fix it! I have tried everything I know to try... Please help!
Create a new profile and copy the old files to your new profile. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Windows vista user account does not
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
Windows 7 admin user profile does not load, but other profiles will be
all other profiles will load I have second admin profile but need to the other profile I think it was manuely deleted files
Hello
Thanks for joining us on the Microsoft Community Forum. Please answer a few questions to refine the question.
1. what happens when you try to connect to the administrator account?
2. do you get an error message?
3. are you aware of changes to the computer before the show?
I suggest you perform the steps described in the article:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryHope this information helps. Please reply with the status so that we can help you.
-
Unable to connect: the user profile failed to connect, the user profile cannot be loaded
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Thank you Fiona
OK all of a sudden my laptop no longer works so I restart and when it asks me to enter my password as it does whenever I turn on the computer or restart I got this message today the USER PROFILE does NOT logon, PROFILE not CAN NOT BE CHARGE. What - what IT MEANS AND HOW can I FIX? Help, please!
First try to restart your PC and press the F8 key, and then choose last known good configration.
If that has not resolved the issue of follow-up:
http://Windows.Microsoft.com/en-AU/Windows-Vista/fix-a-corrupted-user-profile
-
the user profile service service has no logon and the user profile cannot be loaded. IAM not able to switch on the laptop. How to solve this problem?
My laptop is Sony's new Vaio. Windows7. 4 GB of ram and 2.1 billion hertz processor with dual-coreHi ravichandrans36,
Thank you for using Microsoft Windows forum.
This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
To resolve this issue, follow these steps:
1 delete the profile by using the computer properties dialog box. To do this, follow these steps:
a. Click Start, right-click computer and then click Properties.
b. click on change settings.
c. in the System Properties dialog box, click the Advanced tab.
d. under user profiles, click settings.
e. in the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
2. Click Start, type regedit in the start search box and then press ENTER.3. Locate, and then expand the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList4 right-click the SID that you want to delete and then click on remove.
5 log on to the computer and create a new profile.
For more information, see: http://support.microsoft.com/kb/947215
EDITING REGISTRY WARNING:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756Kind regards
Aziz Nadeem - Microsoft Support -
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.
I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.
Hi HiteshAstan,
one) don't you recall making any changes to the computer before this happened?
(b) what exactly happens when you sign in to your account? You get a specific error message?
Step 1: Let us check if the problem persists in safe mode
Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
If the problem persists, you can deduct that the user account is corrupted
Step 2: Create a new administrator account and then try to repair your user account
Create-a-user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
After the back if you have any questions
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I can not connect and it says failed to connect to the profile.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Maybe you are looking for
-
How to change the location of the Start button?
Original title: Start button My Start button is in the upper right corner instead of the bottom left. Does anyone know how to change it back?
-
Windows XP Professional; Information System
I have a Dell GX 260, which had been renovated. It has Windows XP Professional loaded.I don't have access to the Windows XP disc. The problem is:When I go to start > all programs > Accessories > system tools > system information, ratherto get the sys
-
I can't install Windows XP Professional on my new hard drive.
original title: I can not get my copy of windows xp pro to record I had to buy a new hard drive to my HP pc, I rebooted my windows xp pro. Now, I can't activate.
-
10 update won't even boot, forgoing any errors
Whenever I have try and install windows 10 nothing happens, no errors, the process of downloading the file and then still nothing
-
ASA Checkpoint VPN S2S disorders <>
Hi all I struggled to understand some of my ASA debug output that has a VPN configured with a remote control point. In short; the problem lies in the timers to generate a new key P1 & P2. I've defined two timers like 28800 (8 hours). We paired these