"The value entered does not Format of the field.

Similar Questions

• See the value of zero instead of "the value entered does not match the format of the field [].

  I use the simplified notation filed to perform subtraction on a budget form.

  They all have an excellent work and have no problem display a value of zero when it's a simple subtraction (value1-value2).

  However, on my last field I want to take the total income and subtract what I spent (approximately 40 fields) and get a balance zero.

  When I try to do it I get this warning "the value entered does not match the format of the field [].

  The calculation works fine and displays the correct value for all the foregoing ".» 01 "and displays negative numbers. 01 "and underneath as well (if I go on the budget), she just may not show a zero, which is my goal for this equal to zero each month.

  I tried to watch if the forms and have not found an answer that works even for my situation.

  
  Happy to post the form here, just do not know how to do it.

  Thanks in advance,

  The custom calculation script may be something like the following:

  Get the value of field of income, as a number

  var v1 = + getField("Income").value;

  Set up an array of domain names

  var aFieldsToSubtract =]

  "ThithesB,"

  "TailleB,"

  "EFundB,"

  "MortgageB,"

  "HomeItemsB,"

  "HomeRepairsB,"

  "ElecticB,"

  "GasB.

  "WaterB."

  "SewerB,"

  "TrashB,"

  "PhoneB."

  "InternetB."

  "AutoInsB,"

  "UmbrellaB,"

  "IdentityB,"

  "CosmeticsB,"

  "ToiletriesB,"

  "PocketEBB,"

  "PocketCBB,"

  "GiftsB,"

  "HouseSuppliesB,"

  "PersonalOtherB,"

  "PersonalOther2B,"

  "GroceriesB,"

  "RestaurantsB,"

  "ClothingB,"

  "CarGasB,"

  "CarRepairsB,"

  "CarOtherB,"

  "MedicalBillsB,"

  "MedicalOtherB,"

  "EntertainmentB,"

  "VacationB,"

  "DebtCarB,"

  "DebtStudentLoan1B,"

  "DebtStudentLoan2B,"

  "DebtStudentLoan3B,"

  "DebtCreditB,"

  "DebtOther1B,"

  'DebtOther2B '.

  ];

  Subtract the values in field

  for (var i = 0; i)< afieldstosubtract.length,="" i="" +="1)">

  v1-= + getField(aFieldsToSubtract[i]).value;

  }

  Set this field value by rounding the result to the nearest

  Event.Value = util.printf ("%.2f", v1);

  Do not think of this as a band-aid, think the correct way to perform the calculation, because it is. Note that "Thithes" may be a spelling error.

• Error message - the value entered does not match the Format of the field

  I get an error message in Adobe Pro x: "the value entered does not match the format of the field [JF13].

  I have JF13 scheduled as follows:

  Calculate tab:

  If (Number (this.getField("ck4").value) > 0) this.getField("JF13").value = Number (this.getField("FL019").value); else this.getField("JF13").value = "";

  It is programmed in this way, so if the user checks the checkbox in front of the field, only then will JF13 fills a value, which pulls of FL019. I also value parameters 'number' because the data to display in the form of a dollar amount $xxx.xx.

  FL019 is a hidden field on the form which takes an amount of a central computer and its settings can also be programmed to 'Number':

  I get four popup windows with the above mentioned error message, and the only way to make the stop message is to remove the «number» field format. However, when this is done, if a number any ending in a zero is entered, it cuts the zero. This is not acceptable either.

  Is there some kind of script that I could add or otherwise to prevent the error message and the cutting out of the zero on JF13?

  I'm not very proficient with javascript, any help would be appreciated!

  Just include the two quotes, not the comment brackets.

• Value entered does not match the format of the field

  Hello

  I need help with an error message that I receive. I received this message before and has received excellent advice on how to solve this problem, but I can't apply this same solution to this situation, as it is different.

  I have a form with 5 fields. The math for those fields should go as follows:

  Zone 1 (JF01) - area 2 (JF01a) = field 3 (JF01b) + area 4 (JF01c) = field 5 (JF01d)

  Here are the scripts that I have on the tabs to calculate two fields "total":

  (I have all the fields to the number with 2 decimal format and a sign of dollar without space)

  JF01b:

  myField = this.getField ("JF01b") var; myField.value = Number (this.getField("JF01").value) - Number (this.getField("JF01a").value);

  JF01d:

  myField = this.getField ("JF01d") var; myField.value = Number (this.getField("JF01b").value) + Number (this.getField("JF01c").value);

  Everything works great - to-zero = JF01d. If this last field happen to add up to zero it is when I get the error message and I have no idea why. If this field is a number greater than zero or even a negative number, that's fine. But there is simply not a zero.

  Any advice is GREATLY appreciated!

  Thank you!!

  EDIT

  I just noticed a few numbers that equal zero work very well, but for some reason, others don't.

  For example:

  10.00 $ - $50,00 = - 40,00 $40,00 + not = $0.00 works fine no problem, but

  180.00 $ - $190,80 = - $10.80 + $10.80 = - $10.80 last field should be zero - No - $ 10.80 and error message appears

  It seems that the error occurs only when there is numbers other than zeros after the decimal point. (Which still confuses me.)

  The likely cause is the result of the subtraction is a number very close to zero, but not quite, which is represented in scientific notation (by example, - 1.23456e - 15), confuses setting routines in the form which uses Acrobat. You can prevent it by rounding up the result of the calculation, for example:

  Subtract and rounded to two decimal places

  Event.Value = util.printf ("%.2f", + getField("JF01").value - + getField("JF01a").value);

• The value entered does not match the value in the field

  I have a simple form on the page, a field callculates a percentage based on the values entered in 2 other fields, works very well, but then all the entries on the form generates this message "the entered value does not match the value in the field".

  Also, you can remove a tab stop of the fields?

  Just happened again.

• The value entered does not match the format of the field

  I get this error and cannot figure out how to not have pop up, when you use the form.  The calculation and the percentage still works, but you have to click on the box a few times to make them disappear. I'm working on a PDF form, using a drop-down list box, but also calculations with text fields.  It looks like the discount text box that has the selected format category selected as a percentage, is the only time when the form is in error.  If I need this text field to display the number as a percentage.  This text box is also calculated the percentage of discount of a unit cost.  Is there a way to prevent this?

  I used exactly the same formula you provided... Unless you want to say that it is:

  1. (Uprice / DeptEmail)

  In this case simply adjust the last line in the code are:

  else event.value = (1 - (v1 / v2));

• The product key entered does not match any available window images, please enter a different product key

  Original title: complaint of Microsoft

  Dear team,

  Please note that we had bought a laptop Lenovo S 405 of Croma store located at Silver Bow Ludhiana.

  Type of machine:-IdeapadS405APGRTXA84555M4G5008EIN(20196) mode

  Machine Type No.:-59348194

  Serial number of the machine: -.

  Laptop provided with the integrated Windows 8 homepage unilingual, we tried to remove formatting the hard drive & then tried to install Windows 8 PRO that was purchased separately, but the system does not work, system displays a message error that says "the product key entered does not match any available window images, please enter a different product key

  Ask you please help to solve this problem

  Anticipating a quick answer on the same

  Thanking you,

  Yogesh clavreul,

  +

  Hi yogesh,

  This problem could be due to the fact that the product key provided does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  You are able to start after receiving the error message on the screen?

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  For reference, you can check the link and follow the steps proposed by Steven on 24 January 2013:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404B-9b7f-2065bdb91011

  Please let us know if the problem still persists.

• Not able to activate Windows 7 get "the product key you have entered does not seem to be a valid Windows 7 product key.

  Original title: the product under the asus laptop key

  Hello

  I have a problem to activate windows using the product under my laptop key. He says "the product key you have entered does not seem to be a valid Windows 7 product key. Help me solve this problem.

  0xC004F050 usually means that you have misinterpreted a character - or G/C/6 and 8/B or Y/V are the most common, an O/0 is almost always a Q

  Please note that the following characters cannot be used - A E I L N O S U Z 1 0 - so don't bother trying unless you like noise it does :)

• ORA-14313: value 'Limit' does not exist in the partition DATASET_OTHER

  Hi friends,
  
  OS: Linux
  Database Version: 10.2.0.2.0
  
  I wanted to add a partition to one of my partitioned table "mapping". Then when I tried to reverse the partitionwith the command below... I got the error ora-14313 code.
  

  Command Used:
  
  ALTER TABLE MAPPING SPLIT PARTITION dataset_other VALUES ('CAP') INTO (PARTITION dataset_CAP TABLESPACE TBS_MAPPING_CAP, PARTITION dataset_other);

  Error :
  
  ALTER TABLE MAPPING SPLIT PARTITION dataset_other VALUES ('CAP')  INTO (PARTITION dataset_CAP TABLESPACE TBS_MAPPING_CAP, PARTITION dataset_other)
              *
  ORA-14313: Value 'CAP' does not exist in partition DATASET_OTHERERROR at line 1:         

  Please suggest what to do and what is the reason for this? coz of some other partition spilit command executed successfully.
  
  Concerning
  
  Umesh

  Umesh Gupta wrote:

  Here are a few recent records in table

  select table_name,partition_name,tablespace_name,high_value,partition_position from USER_TAB_PARTITIONS order by partition_position
  
  TABLE_NAME     PARTITION_NAME     TABLESPACE_NAME     HIGH_VALUE     PARTITION_POSITION
  
  MAPPING    DATASET_NAP           TBS_MAPPING_NAP   'NAP'     379
  MAPPING    DATASET_MAP           TBS_MAPPING_MAP  'MAP'        380
  MAPPING    DATASET_SAP           TBS_MAPPING_SAP   'SAP'        381
  MAPPING    DATASET_OTHER       TBS_MAPPING          DEFAULT            382
  

  Have you checked other values of 378 score very carefully. (Normally) you get the error message means that the value exists somewhere else already.
  You could also point out the high_value_length, just in case where the high_value isn't really what it looks like (e.g. some backspaces hide certain content).

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  Author: core Oracle

• Auto-Flow does not formatting to the master

  I'm placing a Word 2010 document in an InDesign document with facing pages. The text of the Word document up correctly, but the formatting does not work.  For example, if I have three columns in both of my Master pages, "automatic formatting" place in two columns and the top and bottom margins (height) are too high and too low.  Any idea what could go wrong?  Here's the Master pages.

  

  This is the first release after auto-flux (note two columns):

  And the second (two columns and margins hurt).

  Thank you!

  Steve and Peter,

  Thank you for having responded (I was expecting a notification by E-mail of responses, otherwise I would have responded earlier).

  It turns out that it seems that something was wrong with my master page. I had a similar master page in the same document, and it auto-coulait the same text Word with no problems, so I made a copy of the master page and used with complete success.

  I deleted (slight) to the original master page, I'd probably not able to recreate the same problem to understand what happened.  In practice, I don't need to know anyway, because everything works well now!

  Thanks again.

• I installed Windows 7 Ultimate (32 bit) on another computer as my old drive crashed. The old key that I entered does not work. What should I do?

  My laptop crashed and I started my laptop to another and installed Windows 7 above.  I tried to activate with my old Windows 7 Ultimate key (which was on my dead computer) but it does not work.  What should I do?  Hope I didn't buy the new Windows 7 key.

  Windows 7 Ultimate come preloaded on your old computer?

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You may need to consider investing in a new license if this is the case:

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

• The mouse scroll wheel does not correctly order of fields of Photoshop

  Hi guys,.

  Some general info:

  1. I have Logitech Keyboard K800 - it have its own receiver

  2. I have mouse Logitech (MX1100) - it has its own receptor

  3 Photoshop CS6 x 64-latest updates

  4. Windows 7 x 64-latest updates

  5 set point - latest version

  6. more than system information (please let me know if I should post the entire text of popup Photoshop System Info):

  Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08 / 08:21:00:00) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: Intel CPU Family: 6, model: 10, Stepping: 7 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading FP

  Physical processor count: 4

  Number of logical processors: 8

  Processor speed: 3410 MHz

  Built-in memory: 16342 MB

  Free memory: 9098 MB

  Memory available to Photoshop: 14718 MB

  Memory used by Photoshop: 90%

  Tile image size: 128K

  Image cache level: 4

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  Video card provider: NVIDIA Corporation

  Renderer videocard: GeForce GTX 560/PCIe/SSE2

  Display: 1

  View the limits: = top: 0, left: 0, bottom: 1050, right: 1680

  Video card: 1

  Graphics card: NVIDIA GeForce GTX 560

  OpenCL Version:

  Driver version: 9.18.13.1090

  Driver date: 20121229000000.000000 - 000

  Video card driver: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um

  Video mode: 1680 x 1050 x 4294967296 colors

  Legend of the video card: NVIDIA GeForce GTX 560

  Memory: 1024 MB

  Texture size video Rect: 16384

  Serial number: 92298292820550253494

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

  Temporary file path: C:\Users\kckfm\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  F:\, 685.6 G, 198.8 G free

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

  Additional Plug-ins folder: not defined

  Some other info:

  You know that you can control the fields of Photoshop http://screencast.com/t/ApVseKYRxz with the mouse wheel. Quite handy indeed. Just click on the field and spin the wheel and change the values.

  The problem:

  My mouse wheel is unable to control the entry boxes in this way. I select the field, spin the wheel and nothing happen. When I turn it faster a couple of times, that values are changing - odd ha? Scroll normally - don't change, scroll fast change. But to scroll quickly is not an option because I can't change the values slightly in small increments... There is a bug really...

  What I tried and did not work:

  1 restarted Photoshop

  2. connect / disconnect and change of the different receivers two USB slots.

  3. last Reintalling drivers SetPoint (after uninstalling I run ccleaner)

  4 put the logs all settings by default (because I specifically programmed some MouseKeys to Photoshop).

  5 install earlier versions of SetPoint drivers.

  6. set my UEFI BIOS to default values.

  7 restart the BIOS to load all the drivers again, but still no luck

  (the last think I did is to reinstall Photoshop)

  What I've researched so far:

  1. when I restart the computer and run Photoshop it works perfect HA! , but after a few seconds it is not words again...

  2. when I stop the SetPoint software, when I stopped it, it word perfect.

  3 when I unplug the keyboard receiver it word perfect, but I have no keyboard :)

  4. everything works perfectly in Illustrator and After effects.

  5 also, I noticed that when I CameraRaw images scrolling - http://screencast.com/t/xKnn6cY9 the I scroll more difficult and more difficult to achieve - spin the same problem.

  6. also in photoshop and bridge scrolling here - is quite smooth and works perfectly - http://screencast.com/t/75IXMG6Zria

  Perhaps the most important part - when I start to experience the problem:

  I had the same setup, same everything and everything worked well.

  I have installed the SSD drive, reinstalled Windows (same as before), updated my UEFI BIOS. Installed Photoshop and set point and problem began.

  Posted same request to Logitech, but you want to ask for help too.

  Thank you!

  Hi all

  I found a solution.

  1. uninstall your current driver of the set value.

  2. run CCleaner - http://www.piriform.com/ccleaner

  3. download an older version of setpoint - http://www.oldapps.com/setpoint.php

  (I used the SetPoint 6.15 software (x 64), I tried 6.20 6.32, 6.50, but no luck)

  4. now, all right!

  Thank you!

  Someone can it mark as resolved? Thank you!

  SK

• New shortcut tab (cmd T) and 'enter' does not work

  Hello

  As mentioned above, the new shortcut to the tab (Cmd T) does not work.

  In addition, when you enter, for example, a password, and then hit the key enter, doesn't work, too. (entering a url, then hit enter to work, if...).

  My first guess is that the shortcut cmd T is already in use by another application, it is not, though. I checked this (preferences-> keyboard-> shortcuts).

  The shortcut worked until yesterday after I had updated to el capitan.

  Someone at - it a similar problem and knows how to fix?

  Retina not MBP 13 inch, osx 10.11.1

  Restart your Mac and then try the command-T Safari shortcut keyboard.

  Command + T works fine on Safari / El Capitan v10.11.2 for me.

• Call for equal value node does not event second controlled vi

  Sorry about the start a second thread after I thought that one was resolved.

  However, I have two vi... Control.VI and Responder.vi.  Has Responder.VI of a button that triggers an event when pressed (latch mode).  However, when I try use call node Control.value placed to manipulate the button, the answering machine change button (T/F) value, but the event is not raised.  In a local property node to the answering machine, there will be an option of val (s.de)... but in the node to invoke or invoke property which option does not seem to be available.

  All I really want to do is have the Control.vi because of the event controlled by the button in Responder.vi work without having to rewrite the answering machine.

  All thoughts.

  Thank you.

  Well, I'm happy to hear that someone is going to have to review the code that worked.

  This behavior has been there as a property nodes have been around and I've not met another scenario where this has caused a lot of trouble.

  If you mod your code and trigger that event would have saved the day, while it is using a user event and adding that the case of the event, who manages the Boolean value...

  That Scratch!

  What an another invisable boolean that is not defined for the lock and the mod, then your case of event to manage this boolean and that you are using now?

  As always, I am just trying to help.

  Ben

• Windows 8 OEM or 8 Pro on portable UEFI - product key entered does not match

  Hello, I have a laptop (Asus Zenbook UX32VD) UEFI which Windows installation has been replaced by a Linux distro, including the recovery partition.

  There is no trace of Windows on the drive I can find, however when I plug in my USB from Windows 8 Retail Pro , created with the tool here: http://windows.microsoft.com/en-US/windows-8/upgrade-product-key-only (using the appropriate license key) and when I choose "install", the Setup program indicates it starts, but then stops with a message: "the entry of the product key does not match any of the Images available for Installation Windows. Enter a different product key. I can't enter the right one. I am convinced that the key OEM of Windows 8 is still somewhere in the BIOS.

  Anyway, how to install anything? Either version would be perfect. I read that I can stop Setup to read the license key from the BIOS by pressing one of the buttons F #. I tried them all without success.

  Former title: OEM Windows 8 or 8 Pro on laptop UEFI

  I remember seeing 'Windows 8' in the system, as well as "AAOEM" at the end of the key applet; and it is multilingual, from the beginning and x 64. The OEM key will work with the 8.1 Windows installation?

  And the problem is, I can't download the ISO right now: I get "Download was not completely successful" when using media creation tool (where I could select Windows 8.1 we x 64). I use it on another laptop running Windows 8.1 UK x 64. Anyway, I've tried and succeeded in a clean install of Windows 8 Pro in a virtual linux machine (so no embedded OEM key), answering my basic needs; However, it is really a temporary solution.

  As I said before that the tool of "Upgrade Windows with only a product key" requires a key I have only for Pro 8, and the keys to the list of default keys Windows ADK are considered as invalid, and so I can not end up with Windows 8 (.1) non-Pro in this way.

  I also found this: http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/bipass-uefi-provided-product-key-to-install/a271067b-d655-4b46-8b52-b3f191b9370c and created the PID.txt file with the key; have not yet tried, but it looks promising.

  Creating a file PID.txt won't help you in the slightest. Although it is possible to use a generic key in a PID.txt around enter your product key during the installation of Windows... It will only make problems with product activation later down the line.

  Windows 8.1 [edition variant A] will not activate with a 8.1 Windows [edition variant B] where possible editions are:

  Windows 8 = Windows 8.1

  Windows 8 single language = Windows 8.1 single language

  8N = Windows 8.1N Windows

  Windows 8.1 with Bing

  Windows unilingual 8.1 with Bing

  Windows 8 Professional = Windows 8.1 Professional

  Windows 8 Professional N = Windows 8.1 Professional N

  Through the .iso image file editions until does not have your product key is the best solution at the moment unfortunately.