See the value of zero instead of "the value entered does not match the format of the field [].

Similar Questions

• Error message - the value entered does not match the Format of the field

  I get an error message in Adobe Pro x: "the value entered does not match the format of the field [JF13].

  I have JF13 scheduled as follows:

  Calculate tab:

  If (Number (this.getField("ck4").value) > 0) this.getField("JF13").value = Number (this.getField("FL019").value); else this.getField("JF13").value = "";

  It is programmed in this way, so if the user checks the checkbox in front of the field, only then will JF13 fills a value, which pulls of FL019. I also value parameters 'number' because the data to display in the form of a dollar amount $xxx.xx.

  FL019 is a hidden field on the form which takes an amount of a central computer and its settings can also be programmed to 'Number':

  I get four popup windows with the above mentioned error message, and the only way to make the stop message is to remove the «number» field format. However, when this is done, if a number any ending in a zero is entered, it cuts the zero. This is not acceptable either.

  Is there some kind of script that I could add or otherwise to prevent the error message and the cutting out of the zero on JF13?

  I'm not very proficient with javascript, any help would be appreciated!

  Just include the two quotes, not the comment brackets.

• The value entered does not match the value in the field

  I have a simple form on the page, a field callculates a percentage based on the values entered in 2 other fields, works very well, but then all the entries on the form generates this message "the entered value does not match the value in the field".

  Also, you can remove a tab stop of the fields?

  Just happened again.

• Value entered does not match the format of the field

  Hello

  I need help with an error message that I receive. I received this message before and has received excellent advice on how to solve this problem, but I can't apply this same solution to this situation, as it is different.

  I have a form with 5 fields. The math for those fields should go as follows:

  Zone 1 (JF01) - area 2 (JF01a) = field 3 (JF01b) + area 4 (JF01c) = field 5 (JF01d)

  Here are the scripts that I have on the tabs to calculate two fields "total":

  (I have all the fields to the number with 2 decimal format and a sign of dollar without space)

  JF01b:

  myField = this.getField ("JF01b") var; myField.value = Number (this.getField("JF01").value) - Number (this.getField("JF01a").value);

  JF01d:

  myField = this.getField ("JF01d") var; myField.value = Number (this.getField("JF01b").value) + Number (this.getField("JF01c").value);

  Everything works great - to-zero = JF01d. If this last field happen to add up to zero it is when I get the error message and I have no idea why. If this field is a number greater than zero or even a negative number, that's fine. But there is simply not a zero.

  Any advice is GREATLY appreciated!

  Thank you!!

  EDIT

  I just noticed a few numbers that equal zero work very well, but for some reason, others don't.

  For example:

  10.00 $ - $50,00 = - 40,00 $40,00 + not = $0.00 works fine no problem, but

  180.00 $ - $190,80 = - $10.80 + $10.80 = - $10.80 last field should be zero - No - $ 10.80 and error message appears

  It seems that the error occurs only when there is numbers other than zeros after the decimal point. (Which still confuses me.)

  The likely cause is the result of the subtraction is a number very close to zero, but not quite, which is represented in scientific notation (by example, - 1.23456e - 15), confuses setting routines in the form which uses Acrobat. You can prevent it by rounding up the result of the calculation, for example:

  Subtract and rounded to two decimal places

  Event.Value = util.printf ("%.2f", + getField("JF01").value - + getField("JF01a").value);

• The value entered does not match the format of the field

  I get this error and cannot figure out how to not have pop up, when you use the form.  The calculation and the percentage still works, but you have to click on the box a few times to make them disappear. I'm working on a PDF form, using a drop-down list box, but also calculations with text fields.  It looks like the discount text box that has the selected format category selected as a percentage, is the only time when the form is in error.  If I need this text field to display the number as a percentage.  This text box is also calculated the percentage of discount of a unit cost.  Is there a way to prevent this?

  I used exactly the same formula you provided... Unless you want to say that it is:

  1. (Uprice / DeptEmail)

  In this case simply adjust the last line in the code are:

  else event.value = (1 - (v1 / v2));

• "The value entered does not Format of the field.

  If something similar has been posted, I apologize! I tried to look for it and has not been able to find the answer.

  I have a form to determine the potential savings, if a customer makes our products to a competing product. Our sales staff filling in many areas that allow us to determine the annual cost that the customer currently committed, as well as the potential annual costs associated with our product. At the bottom of the page, using a simple calculation JS, it determines annual dollar savings by changing brands.

  I would also like to include the annual savings as a percentage of current costs, but for some reason, I cannot get the script to work. The error message that appears indicates: "the value entered does not match the format of the field [annual percentage savings]."

  Now, the two fields referenced in my script are formatted in dollars, so I don't know if this makes a difference or not. My script is below.

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;
  var y = this.getField("Cost_Per_Year_Current").value;
  F.value = Event.Value / y.value;

  If (y.value < f.value) event.value = ";

  Given the percentage is not strictly necessary, but it adds to the form, so that any help would be appreciated.

  Thank you!

  Post edited by: MelissaZoller (format)

  I would use:

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;

  var y = this.getField("Cost_Per_Year_Current").value;

  If (y<= 0)="" event.value=''>

  else {}

  Event.Value = f / y;
  If (y< f)="" event.value=''>
  }

  In this way there is no division by zero or a negative number.

• The product key entered does not match any available window images, please enter a different product key

  Original title: complaint of Microsoft

  Dear team,

  Please note that we had bought a laptop Lenovo S 405 of Croma store located at Silver Bow Ludhiana.

  Type of machine:-IdeapadS405APGRTXA84555M4G5008EIN(20196) mode

  Machine Type No.:-59348194

  Serial number of the machine: -.

  Laptop provided with the integrated Windows 8 homepage unilingual, we tried to remove formatting the hard drive & then tried to install Windows 8 PRO that was purchased separately, but the system does not work, system displays a message error that says "the product key entered does not match any available window images, please enter a different product key

  Ask you please help to solve this problem

  Anticipating a quick answer on the same

  Thanking you,

  Yogesh clavreul,

  +

  Hi yogesh,

  This problem could be due to the fact that the product key provided does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  You are able to start after receiving the error message on the screen?

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  For reference, you can check the link and follow the steps proposed by Steven on 24 January 2013:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404B-9b7f-2065bdb91011

  Please let us know if the problem still persists.

• Why microsoft used to support fsx insisting on a product code when all I have is the product key that has been authorized for bu activation does not match their input format

  trying to get a simple answer to my question, I asked the support of microsoft for the contact to ask someone who knows about flight simulator but I can't spend the screen requests I have enter product code - I walked into the box of the product id provided key interest which enabled but said stupid site simply enter the code in the indicated format and it does not match this format once again , I can't communicate with them-i suspect that it is a ploy because there is no available support and it's a time of great runaround.last they do not recognize my computer id code - this time, they have recognized my computer but then obscured code fsx - i don't believe that someone will read this-i has recently received a message to say that my thread on an unanswered question them earlier had been removed and I was wondering who decides that - always has to be someone in life at microsoft

  Hello

  Where have you bought Microsoft Flight Simulator X for?

  Follow the steps in this article.

  
  Solving the problems of activation for Microsoft games and mapping programs

  http://support.Microsoft.com/kb/960480

  Also see this article:
  
  How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
  http://support.Microsoft.com/kb/973457

  If the problem persists, Flight Simulator supports for assistance.
  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• Not able to see the fields within a custom resources optimization

  Hi all

  I am not able to see the fields within a custom value.

  Here is my code for the custom resource optimization:

  public class CustomContentContainer extends VerticalFieldManager{
  
      String content_header;
      int container_height;
      int displayWidth = Display.getWidth();
      int displayHeight = Display.getHeight();
  
      public CustomContentContainer(String content_header,int height){
          super(Manager.NO_VERTICAL_SCROLL | Manager.NO_HORIZONTAL_SCROLL);
          this.content_header = content_header;
          container_height = displayHeight-height;
      }
  
      protected void sublayout(int maxWidth, int maxHeight) {
          super.sublayout(maxWidth, container_height);
          setExtent(maxWidth,container_height);
      };
  
      protected void paint(Graphics graphics)
      {
          int X_POS = 20;
          int Y_POS = 20;
  
          int width = displayWidth;
          int height=container_height;
          int[] xPts = {0, width, width, 0};
          int[] yPts = {0, 0, height, height};
          int[] colors = { 0xffffff, 0xf7f7f6, 0xd4d0cc, 0xb0a9a2 };
          graphics.drawShadedFilledPath(xPts, yPts, null, colors, null);
  
          graphics.setColor(0xc0c0c0);
          graphics.drawRoundRect(X_POS, Y_POS, getWidth()-40, container_height-40, 10,10);
  
          int stringWidth = getFont().getAdvance(content_header);
          graphics.setColor(0xF8F8F8);
  
          graphics.fillRect(35, 5, stringWidth+10, 30);
  
          graphics.setColor(0xFF0000);
          graphics.drawText(content_header, 40, 5);
      };
  
  }
  

  Here is the Code inside the class from the main screen

  settingsContainer = new CustomContentContainer("Settings",vodavaultLogo.getHeight());
          contentContainer = new VerticalFieldManager(Manager.VERTICAL_SCROLL|USE_ALL_WIDTH);
  
          passwd1 = new CustomEditField();
          passwd2 = new CustomEditField();
          contentContainer.add(passwd1);
          contentContainer.add(passwd2);
          contentContainer.setMargin(35,35,35,35);
  
          mainContainer.add(vodavaultLogoField);
          settingsContainer.add(contentContainer);
          mainContainer.add(settingsContainer);
          add(mainContainer);
  

  You must call the super.paint (.) in your paint (...) optimization of resources, if you paint all areas which are added.

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• my information does not match the screen. I have to scroll sideways and vertically for all to see

  my information does not match the screen.  I have to scroll sideways and vertically for all to see

  How can I change the size if it is adapted to the screen?

  Hi Marilyndunn,

  ·         are what application you referring?

  ·         It occurs on all applications?

  ·         If it works well before?

  ·         Did you do changes on the computer before the show?

  You can see the following article for more information about the display settings.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

   

  Make the computer easier to see (optimize visual display)

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-computer-easier-to-see-optimize-visual-display

  Hope this information helps.

• Windows 7 ultimate has received 29 updates today, now when the user icon, click on do not see the field of password for sign on

  Windows 7 ultimate has received 29 updates today, now when the user icon, click on do not see the field of password for sign on

  Hi Richard,

  Thanks for posting your query on the Microsoft Community.

  Thank you for details on the issue and we are happy to help you.

  I suggest to refer to the following article from Microsoft regarding Solutions to problems with the Windows logon and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

  Please let us know if you need help with Windows. We are happy to help you.

  Thank you.

• OBIEE error - Datetime-01-01 value does not match the specified format

  I get this error after the promotion of Production. It works perfectly well on the Test Server.

  I am using SQL server. After launching the date as a varchar, it works fine.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046]-01-01 Datetime value does not match the specified format. (HY000)

  Gurus of OBIEE please help

  JD

  I found the solution as well.

  The Windows Server ODBC driver was old (Version 6). I have who has upgraded to SQL Server Native Client 11.0 and everything works fine.

• ORA-14313: value 'Limit' does not exist in the partition DATASET_OTHER

  Hi friends,
  
  OS: Linux
  Database Version: 10.2.0.2.0
  
  I wanted to add a partition to one of my partitioned table "mapping". Then when I tried to reverse the partitionwith the command below... I got the error ora-14313 code.
  

  Command Used:
  
  ALTER TABLE MAPPING SPLIT PARTITION dataset_other VALUES ('CAP') INTO (PARTITION dataset_CAP TABLESPACE TBS_MAPPING_CAP, PARTITION dataset_other);

  Error :
  
  ALTER TABLE MAPPING SPLIT PARTITION dataset_other VALUES ('CAP')  INTO (PARTITION dataset_CAP TABLESPACE TBS_MAPPING_CAP, PARTITION dataset_other)
              *
  ORA-14313: Value 'CAP' does not exist in partition DATASET_OTHERERROR at line 1:         

  Please suggest what to do and what is the reason for this? coz of some other partition spilit command executed successfully.
  
  Concerning
  
  Umesh

  Umesh Gupta wrote:

  Here are a few recent records in table

  select table_name,partition_name,tablespace_name,high_value,partition_position from USER_TAB_PARTITIONS order by partition_position
  
  TABLE_NAME     PARTITION_NAME     TABLESPACE_NAME     HIGH_VALUE     PARTITION_POSITION
  
  MAPPING    DATASET_NAP           TBS_MAPPING_NAP   'NAP'     379
  MAPPING    DATASET_MAP           TBS_MAPPING_MAP  'MAP'        380
  MAPPING    DATASET_SAP           TBS_MAPPING_SAP   'SAP'        381
  MAPPING    DATASET_OTHER       TBS_MAPPING          DEFAULT            382
  

  Have you checked other values of 378 score very carefully. (Normally) you get the error message means that the value exists somewhere else already.
  You could also point out the high_value_length, just in case where the high_value isn't really what it looks like (e.g. some backspaces hide certain content).

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  Author: core Oracle