The Web App submitted user - categories

Similar Questions

• Is it possible output display of list of items in web app using two categories?

  Help, please! Is it possible output display of list of items in web app using two categories? For example, I want to list all the items web app 32098 marked with categories 189076 AND 190266, excluding items that have been marked with one of these categories. Site is not currently liquid activated, but I could enable, if necessary. Any suggestion would be appreciated.

  I highly recommend the App search Web use if you ever want to search by multiple fields.

  I recommend against the use of categories. Avoid as much as possible, categorization items if you can. Try to work on your web applications around the areas of web application development and web app datasource, if you can.

  This allows you to easily filter a web application defined by one or more fields with precision and fast!

  Here is an example of a site using web app search find a floor - Tauranga carpets and floor coverings

  Here's another example of site Web too: our range of rolls of carpet

  However, if you insist and require the use of categorize, I know to categorize, you can have 1-to-many relationships, so I think that Robert Bell said that it the best, you can simply filter web app items from several categories. Even if using liquid - by the way, as output of fluid tell you not what the element is qualified.

  My recommendation is to rethink your application web, if possible, do not use categories.

  Hope this helps,

  Stephen

• What happened to the Web Apps for Web marketing package?

  What happened to the Web Apps for Web marketing package? We have put in place three clients as part of this package as test sites, employing several situations where web Apps had a critical role. Then after that the option to purchase the hosting package disappears, leaving customers without the ability to edit it content apart from removing the tag of the page module.

  I think that this should be left on the Web marketing package, because not all users who might use it need ecommerce.

  Any ideas?

  Joel. Software now everywhere.

  It is not a trial mode.

  This is the phase of development of a site and the developer must know the system, what is the cost of the project, what the customer needs and which package they will use.

  Each project we and know and define what we do and outlines the packet type etc in the contract to the client.

  I have to say that if any valid partner on an issue that has not done this is wrong in my eyes. Sorry:(juste mon avis parce que si quelqu'un est la construction d'entreprises en ligne et sites Web pour les personnes dont ils ont besoin de savoir ce qu'ils font.)

  Many keys of development for SAAS offer everything what but you choose the plan, much of these days trial opens to all features for a short period of time.

  Was a case where the trial modes had limited features, but then people complain that they can't trial features they are interested.

  Regarding the packages themselves: they are not good, not well thought out on several levels and need re-doing.

• Problems with the web app FDM

  Hello
  
  I am getting below error while running the data map in the web app FDM. FDM - 11.1.1.3 version. Where I could find the this error stack trace? Please could you help me solve this problem.
  
  
  Error - "an exception occurred during the execution of the current web request. Please contact the administrator to review the stack trace in the event log for more information about the error"
  
  Source: http://ProdServerName/HyperionFDM/AuthorizedPages/LogonPage.aspx
  
  Thank you
  Michel K

  This problem is resolved after removing the special characters to the corresponding Oracle table - tdatamap.

  Thank you
  Michel K

• The use of tags in the web app page point thanks to a model

  Hey guys, I'm having a problem here. I have the list on my list of web app so that a user can click to go to the landing page the selected items. I created a template for the landing page web app. The problem is that in my template I {tag_whatever} on the page and all relevant tags for that particular item. For some reason, the BC does not render the tag. Oddly enough, it is not also make a {module_loggedIn} tag that is on this page. I don't know what to do here. I need people to click on the name of the item web app and then land on a page that shows the rest of the web content of the app element. How should I proceed? Thank you all!

  Damien

  P. S.

  Web Apps landing page, I mean the URL that is generated for each individual part of web app. Thank you!

  Tags render only part of British Colombia he is part of. Tags of web app only make layouts of web app.

  If you choose a model for a web application element which will not include these tags.

  You need to apply labels and manage layouts of the web application itself. You have the list, the list view backup and detail and can also create your own layouts extra list as well.

  In regard to the tag module that you listed there. This isn't the right module and why it won't be rendered. It's - {module_isloggedin}

  For a web app list view that you do not create a page for this, you use its great layout. You use the tags associated with this layout, and then you create the HTML for this page layout and add the tags in there.

• No Option of the Web - App for Emoticon size

  Image: http://puu.sh/qa29U.png
  Problem: There seems to be no setting to enable these emoticons are line height or scaling via cosmic scales within the web client of Skype version. As you can see, it's the other sympathy users seem very unfriendly... (which is obviously not the real problem).

  I see that the function has now found its way to the latest version of Skype Web. Thank you!

• The Web of LabVIEW user interface directly to the sensor with Ethernet connection

  Hello

  Is it possible to connect to the interface user Web of LabVIEW directly to a sensor with Ethernet connection?

  By directly, I mean without using any Web Service LabVIEW VI.

  Thank you

  Marcelo

  Hello

  The only communication with other devices using the Web user interface designer is through web services, either motorized or not LabVIEW. To connect with a sensor with the generator of the user Web interface without using LabVIEW, the sensing device must be accessible via HTTP and give you a way to read its data using XML web services based on.

• Create a table for the web app components

  Hi all, I want to create one to display a list of web app components with the headings at the top of the table and the list of results, then under. See the result here Focus apartments, Brisbane

  I have 2 paintings put up here on the page, with the titles and the other containing the results. So there is no surprise for it being 2 completely separate tables that they don't line up correctly with each other during the display of the results.

  If I insert lines in the webapp layout, he repeats to each item in the list, which we don't want.

  How can I get these headers and data to align properly? No doubt there is a better way than this attempt. Thank you

  Create the table with thead and tbody element on the page. In the tbody add your module tag web app. In the available list web app only include the row in the table (not an entire table).

• Page of search results on the Web App

  I'm not new to BC - but I have to be over looking something. I have a Web App form search on a page, I removed the module of results, I've swapped the new results page for the oid {module} (or whatever it is) and placed the tag search results on the search page to what I'm pointing...

  The feature works fine ON the same page-, but the system can't find the page (i.e. Page not found) when I try to move the search results to the new page. Please help me! I'm sure it's something stupid that I am- but I'm going nuts! Thank you!

  Hey there,

  You do not replace the action of the form with this module your which replaces with this pageID with a right to the url of the page id...

  & ID = /-search results-page

• Hide the paging of the web app

  How to hide the paging in web apps... Look at a source I can see the code, but can't find where I can disable it in British Colombia (or Dreamweaver)?

  Hello

  I suggest looking in your module style sheet file and update the reference swap to ' display: none '.

  Before:

  

  After:

  

  I hope this helps!

  -Sidney

• Best practices for the secure connection of the web/app site

  Hello, all,.

  I'm nearing the end of my project and could use some advice on creating a connection to it.

  First, I really want to avoid using the CFLOGIN/CFLOGINUSER, if possible.  I know that a lot of people use it and everything, but after some things I read online, I'm not comfortable with it.  I would like to create one from scratch.  I googled for it, but I'm not finding anything that does not use CFLOGIN.

  That said, another thing that concerns me now is a connected administrator beyond what can make any session scope.  No matter how long I programmatically set the session, I believe that it may not exceed what is defined in CFAdmin.  So if I put manually the session expires in an hour, but the CFAdmin said 20 minutes, the session will not last more than 20 minutes.  :/

  One last thing.  (I have little desire to Columbo, now) simultaneous connections.  I want to ban them and set it so that when an admin is connected to already, only a second connection without a disconnection, first, to deny the second attempt to logon.  Is it difficult to organize?

  I have included the class for BCrypt in my admin section and plans using them to encrypt passwords before their insertion in the database.  Yes or no?

  V/r,

  ^_^

  UPDATE: ALSO - how is it hard to put it so I can see who is connected and 'boot' any who (assuming I think that their account has been compromised)?

  WolfShade wrote:

  So, how do _you_ track the status of the connection? I have never created a connection; When I currently have a job, the network manages the authentication/authorization via common access cards.

  I create a login page, authenticate the user, and if valid, I create a user bean (I use FW/1 and he loves beans and once you get the hang of them they are flexible and powerful) and store this in the session bean. The bean understands everything right the user could have (admin, user, Editor, etc.). So somewhere in the application startup process I check the rights necessary to the requested page or action and validate it against the user bean (or bean user exist even in the case of a user not connected). To disconnect, simply remove the user from the session bean.

  You can search a little more on how to apply the rights and roles to a site and a user. I founded the framework that I use on an article for box fuses and describes rights such as locks and key - locks applied to the site and keys given to users. Once you have a basic framework that the rest is easier than you may think right now.

• Element of the web app as a destination of a secure page?

  Can I have an element of web application as a destination of a secure page?

  No, you can use the Web Pages.

• appvolume Setup is complete but get error below when opening the web app-volume Manager interface. Cannot start the volume App Manager "cannot load this file - tiny_tds.

  "failed to start volume App Manager" boot failure Unable to load the file of this type - tiny_tds

  

  Hi Paul amstaur,.

  This question says, I've met before, and there is a permission problem. Please do below things to get rid of.

  Since you have already installed the app volume, go back to the snapshot, or install a vanilla OS. Provide a sufficient permission in the local security policy, if you install SQL express as well as the volume of the app as the backup Administrator, debug as an administrator, log in as a service to the domain user. Also make sure the time is correct on the computer. You must restart the computer after you gave permission.  Most of the cases you already have full filled what mentioned above, but still you get an error.  To get rid of it, you must copy the appvolume installation files to the local directory, may be in the C drive and recommending only not to mount the ISO in virtual CD ROM, instead of copy and extract the ISO locally.  the next important thing is that you must run the setup.exe AppVolume run as administrator.

• deploy the cloud app without user

  Hello

  How to manage a cloud of installation if the user that is supposed to received the invitation is not here

  as that admin if I install the app the user will still be able to use his app?

  Hello

  If you are the named user workflow then user must accept the invitation and the connection to

  Creative cloud desktop application.

  If you do the serial number workflow then there is no problem you can install the software on the computer of the end user.

  Allows the user the application installed on comeback because it is preactivated.

  Kind regards

  Sumit Singh

• Get the Web app points / details to show Up on the model of Mobile too

  Hello

  I have elements of web application displayed on the model they are assisned to, but needs them to appear on a mobile model too.

  Of course, I'm using mobile media to the platform and using a separate/mobile folder.

  Here are the current site

  http://cajobjournal.BusinessCatalyst.com/

  Click on any item and you can see the details appear on the desktop model.

  Any thoughts on the best solution to workaround?

  Thank you, Montreal

  Solved. Some minor CSS and the settings to the model that receives all the system and app.