The Windows Installer service could not access while trying to install Skype

Similar Questions

• The Windows Installer Service could not be accessed

  Original title: I get this message: when you try to install a software like Microsoft Plus! for Windows XP or Microsoft Office 2003, Microsoft Windows XP, you may receive the following error message:

  I can't update my programs or even my anti virus...   I get the following message...

  The Windows Installer Service could not be accessed.
  This can occur if you are running Windows in safe
  mode, or if Windows Installer is not correctly
  installed. Contact your support team.

   

  How do I change to run in safe mode Windows... is it still a good thing to do?

  Hello

  Please follow the links below and check the issue:

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003:

  http://support.Microsoft.com/kb/315346#method3

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  For reference:

  Error message "the Windows Installer service is not be available" when you try to install Office

  http://support.Microsoft.com/kb/324516

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps.

• Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

  Crazy became Windows Installer

  have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

  Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

  Hi, Honorine,.

  Follow the steps listed in the following article:

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  See also:

  Problems installing and uninstalling programs on Windows computers

• My Windows Installer does not work. Msg I get: the Windows Installer Service could not be accessed.

  Can't install or uninstall I get this msg.  The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly. Contact your support team. HELP please.

  Hello Monica and DuaneWolfe,.
   
  
  Thanks for posting in the Microsoft Community. I understand that the Windows Installer does not work on the computer windows vista. I also noticed that there is another thread of yours, with the same question, and the thread was answered by Yaqub K August 30, 2012.
  
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-the-Windows-Installer-service-could-not-be/354c393e-CCCA-42AD-9952-4aa70bfdb336
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest you to consult the help article mentioned in this thread and let us know the status of the issue.

  
  Please avoid creating threads in duplicate on the same issue. You can reply to this thread if you need help and I'll be more than happy to help you.

• The Windows Installer Service could not be accessed. Vista Home Premium

  I can't install new programs, updates or software (for printer), without having this error:

  "The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly. »

  I tried without success that all suggested here, including the download of Windows Installer 4.5, which gave a message that it does not apply to my computer.  I have Vista 32 bit Home Premium.

  Having the same problem I have tried most of the above steps, then decided to down load http://download.bleepingcomputer.com/win-services/vista/msiserver.reg and installed according to the instructions and Bingo, I managed to down load the file ' Kies from Samsung.

  Thanks for the help

  Pzem

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• I get the error message, the Windows Installer Service could not be found, is there a solution?

  I get an error message, the Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Is there any solution for this?  Also I can't find service.msi.  Make sure you typed the name correctly and then try again.  Any help I can get for this will be appreiated.  System restore not working anymore.  Carolyn Stallings

  Always, always, first specify what operating system you are using before you begin to explain the problem.

  Try this tutorial. It works for Vista and Win 7.

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

• "The Windows Installer Service could not be accessed. This can happen if Windows install is not properly installed. Contact your support team. »

  I use Vista 64 Ultimate.

  The last item I have installed is iTunes 8. I managed to install, but a few hours later the error pops up.

  I can download is nothing more.
  I can't install anything.

  When I go into computer management and try manually a start, I get this:
  "Windows cannot start the Windows Installer service on Local computer.       "Error 216: 0xd8.

  I can't update anything.

  As I said earlier, when I try to download anything, it looks like it is downloading but no files appear in fact where they should be.

  Please help, I have ALL my work on this computer and I didn't save anything. :(

  Hi VVinter

  Thank you for using the Microsoft Answers Forums!

  We can try a few steps listed below and check.

  Step 1:

  Run an on-line analysis of your PC of malicious software:

  If you want to scan your computer for malware and potentially unwanted on a Web site, please use the Windows Live OneCare safety scanner.

  You can also run Anti-Malware on your computer. Follow the steps in this link:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Step 2: Windows Service install

  To check if the Windows Installer service is set to Disable, follow these steps:

  1. Click Start, click run, type services.msc in the Open text box, and then click OK.
  2. In the list of Services (Local) , right-click Windows Installer, and then click Properties.
  3. If the drop-down list Startup type is set to the value off, select the Manual option in the drop-down list Startup type , Start the service and then click OK.
  4. Click the file menu, and then click exit.

  You can also try to download the latest Windows Installer and install it:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Note: Uninstall one already present in your system to-> program and features in the control panel.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1719: The Windows Installer Service could not be accessed

  Original title: Please help, almost nothing works: video, audio, internet, most of the programs.

  It is a long story and it arrived a bit at random so I have no idea where to start, but I'm going. While trying to install autodesk software, I received the message: Error 1719. Install the WIndows service could not be accessed. This can happen if windows install is not properly installed. Contact your support team. I didn't know what to do so I rebooted and that's where the trouble started. I'm unable to play any audio or video. I am unable to connect to the internet as there is no connection available, but I'd just been connecting to my wireless home network earlier. I am unable to do a system restore because I got the message: System Restore is not working properly on this system. A volume shadow copy Service component has encountered an unexpected error. See the log even application for more information. (0 x 80042302). I think that this problem may have to do with a corrupt registry or some proxy problems or something. I tried to reinstall drivers, but I'm unable to access my cd drive to launch the backup drive drivers provided by microsoft. Please help me, I dual boot ubuntu is how I can access the internet. It must be a software problem if I have my other OS works perfectly. NEEED HELP SO BADLY. THANKS in advance.

  Hi cweb512,

  ·        You have opened a session in normal mode?

  To check that we will follow the tests below:

  (1) you see the mode without fail at the ends of the screen?

  (2) otherwise, and then check the status:

  a. click on start

  (b) in the search box, type msconfig

  c. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  d. under the general tab, make sure a Normal startup is checked.

  e. If not click the option and restart the computer

  Check the status of the Volume shadow copy service and the Windows service install in the services window. Use the following steps to check:

  a. Click Start and type services.msc in the search box

  b. search for services

  c. make sure that the startup type is automatic. Steps to set the auto services

  d. right-click on the service

  e. If the service is stopped and then starts the service

  f. Select Properties

  g and in startup type, select automatic

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  1,2,4 and 5 do not work

  for some reason any when I tried to do the method 3 and go into services, it won't let me change the settings...

  Make sure that you do not take to remote procedure (RPC) Locator call *.
  Right click on the remote procedure call (RPC) > Properties. Can change you it now?

  t-4-2

  I have the same problem, even though this post is very old. and no, it won't work

• Error Msg When trying to download the free program office: "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  Please see the msg of error under the title above.

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to get updates, get the error "The Windows Installer Service could access."

  I use window Vista Home Basic. A few months I get the message "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. I could not get updates for windows or my adding free avg. My windows Defender does not turn. Can you please advise me in what we can do

  Original title: the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team.

  System Mechanic is your troublemaker here and you're not alone! See these recent discussions:

  .

  Contact System Mechanic (iolo.com) support if necessary.

  TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Windows Installer service could not be accessed - error in Windows 7

  Ladies and gentlemen,

  Currently, I get the following error when I try to install any program in the system:

  "The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  Msiexec running from the CMD prompt indicates the verion is Windows® install. V 5.0.7600.16385.

  The service runs. I tried to unreg and regserver via safe mode.  But the error persists. The register indicates the path to the correct image for the msiserver. The service seems to work very well.

  I can't locate a download of version 5 of the MSI installer. All the references found are versions 4.5 and earlier versions.

  I can't run install it Cleanup utility because f of course, it does not allow me to install it. I'm running Windows 7 Ultimate.

  Thanks in advance for your suggestions.

  All users have this problem?  Have you tried another user administrator to see if they have better luck than your current one?

  Have you tried the System File Checker or restoring the system?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  See if something is in conflict with your access installation Service. maybe even Malware?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  See if any of these options will allow you to run with higher privileges .msi file?

  Context menu "Run as administrator" for Vista MSI
  http://www.Symantec.com/connect/downloads/MSI-run-administrator-context-menu-Vista

  Can you extract the files and find a right click on Setup.exe and "Run As an Administrator"?

  Try this from an elevated command msiexec /a prompt (and enter in your full path for the .msi file)

  How to: extract files from an .msi file by using the Windows command line
  http://thebackroomtech.WordPress.com/2007/08/23/HOWTO-extract-files-from-a-MSI-file-using-the-Windows-command-line/

• Error-"Windows Installer Service could not be accessed. This can occur if the windows installer is not installed properly.

  Original title: Windows 7 critical updates

  A number of critical updates made automatically in the last two days.  He was stuck in a loop "failed to install...". "for hours.  I tried to make it a point to restore in safe mode, and it is stuck in a loop (more than 12 hours).  I tried to uninstall and it won't let me.  Now I get "Windows Installer Service could not be accessed.  This can occur if the windows installer is not installed properly. "If I turned off the computer and do not ne pas demarrer start in safe mode, shut up always on the original"failed to install ".  I need help!

  Windows restore points have never been of any property,

  Images of a completely separate hard drive system would be easy to undo this question

  It's so time spent to create system images before downloading and installing windows updates

  http://www.SevenForums.com/tutorials/219533-troubleshooting-Windows-7-failure-boot.html

  http://www.Macrium.com/reflectfree.aspx

  https://www.YouTube.com/watch?v=KQA7NlLvxg8

  If you need to reinstall windows

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

  I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

  Hello

  1. are you able to install other programs?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Start the Windows Installer service

  See the following steps:

  a. click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. set the startup type of Windows Installer to automatic
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Method 3: Unsubscribe and re - register the Windows Setup program.

  See the following steps:

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

  Note: Even if you do it right, it may seem that nothing is happening.

  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

  Note: After you run this command, the operation is complete.

  c. try your application based on Windows Installer again.

  Method 4: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833