There are all sorts of symbols in the upper part of the screen on different things. (Delete, answer, answer all etc)

Similar Questions

• There are horizontal and vertical lines on the screen

  I have an asus game monitor old 2 years... other days I let my 12 year old son House and when I returned, he said my monitor was broken... I shot to the top of the platform and there are... also.i .vertical and horazonaly can see the image on the screen through the lines as if someone in em pencil in... IV never seen this befor... any clues as to get rid of um? Home build phenom 965 be-850 watt he's corsair psu-all sata 1.5 to hdd-7970 saphire dule x - all air cooled and clocked at 4.114

  Check the video cable to the monitor and the computer side, the lines of deformation may indicate when its loose or if you have a bad cable. A bad cable is unlikely, but one cannot rule out completely without trials.

  If you have another monitor or know someone who you can borrow a display test, it would be the fastest and the most effective way to be sure where the problem is.

  If lines change or "move" when you move the mouse or a window autour, this indicates a bad connection or bad cable as indicated above or a problem with the video card. Overclocking can cause this kind of things happen as well so if you have overclocked your hardware, return it back to the factory settings and the problem may disappear.

  If the lines are always the same and do not change when you move the mouse or a window autour, the monitor is probably the problem.

  Figure 8 and 9 on the link below both show what it looks like when the monitor is the problem in the above example: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph05236&lc=en&cc=ie&dlc=en

• I started my computer and there are all these weird symbols as of circles, triangles, squares/boxes in all the different combinations. What went wrong and how can I solve this problem?

  The last thing I remember install was itunes 10.5, so I don't think that is the problem, but this has never happened before.

  ... and there are all these weird symbols as of circles, triangles, squares/boxes in combinations all different...

  If that's what you look for the desktop icons,

  

  ... then the police Marlett has been replaced by the system font. This has been addressed and (I think) solved in the following thread.

  Update loses wing dings font only appear the program has then no value

  No particular answer has been specifically marked as the answer to the problem, but I believe that we have identified and solved the problem.

• How OE 6.0 behaves if there are too many messages stored in the Inbox or sent folders?

  Ability of OE message

  How OE 6.0 behave if there are too many messages stored in the Inbox or sent folders. And the number depends on whether or not they have been read. Is there a limit on the file deleted or is it supported by Auto removes permanent?

  Partially covered in your other post.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

  I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

  I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
  http://support.Microsoft.com/default.aspx/KB/969710

  I currently have Windows Vista Home Premium SP2, 64-bit edition.

  Hello

  Thanks for the response back.

  The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

  Some possible causes for failure Remote Desktop connection are:
  a. authentication level is low/disabled.
  (b) the port of remote desktop can be blocked by a firewall.
  c. remote connections might not be enabled on the remote computer.
  d. the remote computer may be asleep or hibernating.
  e. e user account doesn't have a password.
  f. the remote computer may be too busy to accept more connections.

  To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• I JUST DOWNLOADED AND INSTALLED ADOBE PHOTOSHOP ELEMENTS 13. WHEN I OPEN IT AND PUT AN IMAGE TO CHANGE. THERE ARE ONLY 8 TOOLS SHOWING ON THE SIDE LEFT. THERE IS NO TOOL ERRACER OR OTHERS. WHAT SHOULD I DO TO SOLVE THIS PROBLEM. «"«DINO»»»

  I JUST DOWNLOADED AND INSTALLED ADOBE PHOTOSHOP ELEMENTS 13. WHEN I OPENED IT AND PUT IN AN IMAGE TO CHANGE. THERE ARE ONLY 8 TOOLS SHOWING ON THE SIDE LEFT. THERE IS NO TOOL GUM OR OTHERS. WHAT SHOULD I DO TO SOLVE THIS PROBLEM. «"«DINO»»»

  Hello

  You are probably using the Quick - switch to Expert mode at the top. All the tools are only available in Expert mode.

  Brian

• ESX 3.5.0 317866 there are not enough licenses to perform the operation

  Hello!

  We have not changed anything in our virtual environment for 2 months. And now when I tried to turn on a virtual machine, I got the error

  "There are not enough licenses to perform the operation.

  As I understand it, there was a bug in some versions that should be fixed now.

  Under the configuration of hosts and licensee I have ESX Server edition as unlicensed.

  Then I click on edit and choose ESX Server Standard and click OK.

  But the ESX Server edition remains as unlicensed.

  In the VMware license server tools, everything seems fine. (As far as I see)

  Below, you have the status of License Manager

  Retrieves all the steps in this article and everything seems to be in order

  Ko. VMware.com/kb/7114568

  It simply doesn't get it.

  Rasmus

  --------
  Status
  --------
  Status of flexible licensing on Thursday, February 24, 2011 16:11

  [Detection processes lmgrd...]
  The license server status: 27000@vc
  File (s) on vc of license: license VMware C:\Program Server\Licenses\converter.lic:C:\Program license Server\Licenses\esx1_xx_xx.lic:C:\Program license Server\Licenses\esx2_xx_xx.lic:C:\Program license Server\Licenses\vc_xx_xx.lic:C:\Program license Server\Licenses\vmware.lic VMware VMware VMware VMware:

  VC: license server UP (MASTER) v10.8

  Demon provider (on vc) status:

  VMWARELM: UP v10.8
  Info according to its use:

  Users of P2V_ENTERPRISE: (Uncounted, node Lock)

  Users of PROD_ESX_FULL: (Total of 4 licences;  Total of 0 licenses in use)

  Users of ESX_FULL_BACKUP: (Total of 4 licences;  Total of 0 licenses in use)

  Users of VC_ESXHOST: (Total of 4 licences;  In total, 4 licenses in use)

  V2005.05 "VC_ESXHOST", the name of the seller: VMWARELM
  floating license

  Vc vc (v2005.05) (vc/27000 801) SYSTEM, start game 2/24 14:57, 2 licenses
  Vc vc (v2005.05) (vc/27000 102) SYSTEM, start game 2/24 14:57, 2 licenses

  Users of VC_VMOTION: (Total of 4 licences;  In total, 4 licenses in use)

  V2005.05 "VC_VMOTION", the name of the seller: VMWARELM
  floating license

  Vc vc (v2005.05) (vc/27000 901) SYSTEM, start game 2/24 14:57, 2 licenses
  Vc vc (v2005.05) (vc/27000 702) SYSTEM, start game 2/24 14:57, 2 licenses

  Users of VC_DAS: (Total of 4 licences;  In total, 4 licenses in use)

  V2005.05 "VC_DAS", the name of the seller: VMWARELM
  floating license

  Vc vc (v2005.05) (vc/27000 302) SYSTEM, start game 2/24 14:57, 2 licenses
  Vc vc (v2005.05) (vc/27000 202) SYSTEM, start game 2/24 14:57, 2 licenses

  Users of VC_DRS: (Total of 4 licences;  In total, 4 licenses in use)

  V2005.05 "VC_DRS", the name of the seller: VMWARELM
  floating license

  Vc vc (v2005.05) (vc/27000 402) SYSTEM, start game 2/24 14:57, 2 licenses
  Vc vc (v2005.05) (vc/27000 502) SYSTEM, start game 2/24 14:57, 2 licenses

  Users of PROD_VC: (Total of 1 permit;  In total, 1 license in use)

  V2005.05 "PROD_VC", the name of the seller: VMWARELM
  floating license

  Vc vc (v2005.05) (vc/27000 602) SYSTEM, start game 2/24 14:57

  Users of _PING_SERVER_: (Total of 1 permit;  Total of 0 licenses in use)

  You probably already checked this, but make sure that where it shows the license server in the CR, it says "not found".  If so, modify, change anything, OK.  And he can then reconnect.  This happens a lot in one of our branches in bad bandwidth.

• Black ink cartridge made. R there are 3 other color cartridges in the printer. I would use them instead.

  Black ink cartridge made. R there are 3 other color cartridges in the printer. want to use them.

  Hello

  • What is the brand and model of the printer?

  I suggest you to contact the manufacturer of the printer for assistance.

• Satellite Pro M10 - horizontal lines on the screen in different areas

  Hi all

  I hope someone can help.
  My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.
  It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortly after
  The laptop would crash and enter in a resolution of 800 x 600 16 colors or sometimes freeze.

  Graphic drivers have been resettled, and even a new installation of Windows XP from the recovery CD does not help.
  A reboot doesn't solve what the same thing happens again and after one minute of use, so I thought it might be a video or cooling problem.
  I changed the video card I had a spare part of my last motherboard hoping this would solve the problems, but the problem persists.
  Perhaps a cooling problem? Or problems of motherboard?
  The motherboard has been replaced twice, hoping that this isn't another mobo problem.

  Any advice would be great.

  Thank you.

  Hello

  I m not 100% sure but to me it looks a bit like an overheating problem
  Maybe the graphics card may not be properly cooled after a certain period of time and that's why these strange horizontal lines appear on the screen.

  I wonder how you were able to replace the graphics chip on the motherboard?  :|
  If I m not wrong not the chip is fixed and the replacement is very easy and difficult

  It of always difficult to say what's maybe wrong without running several diagnostic tests in most cases this problem may be related to the defective chip or motherboard and so the following should be checked

  Sorry, but that's all I can suggest.

  Best regards from my friend

• My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

  Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

• Print outs are increasingly large print shown on the screen. Help please.

  Original title: print the problem

  Print outs are increasingly large print shown on the screen. This Cup is right edge

  or way to print additional pages. Help please.

  Hello

  1. facing this problem when printing from all applications or specific application?

  2. What is the serial number and model of the printer?

  You try to print the test page and verify that you are experiencing the same issue.

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

• Is there a button to push that initiates the screen saver without delay to launch?

  Is there a button to push that initiates the screen saver without delay to launch? I want to apply the screasaver with out having to wait the time it takes so that it starts on its own. Looking to see if there is a way to do this?

  Is there a button to push that initiates the screen saver without delay to launch? I want to apply the screasaver with out having to wait the time it takes so that it starts on its own. Looking to see if there is a way to do this?

  see if you can use this tutorial...
  To create an icon to launch the screensaver.

  http://www.howtogeek.com/HOWTO/Windows-Vista/create-icons-to-start-the-screensaver-on-Windows-Vista/

  PS adding...

  An easy way, scroll down for:

  Download of shortcut icons (Vista only). The author has created a "ready-made shortcuts.

  I have not tried. I can't guarantee it.* *.

• How we split the screen for different horizontal and vertical divisions

  Hello
  
  How we split the screen for different horizontal and vertical divisions. I can't use panelSplitter because I need fixed screen and not the division which is movable/sliding. I tried inlineframe, but which fails because you cannot use forms, other trees components... :(
  
  so I would like to know how to do division without panelSplitter.
  
  Thanks in advance,
  Jyothi

  Hi Jyothi,

  If you set the panelSplitter attribute disabled to true, the delimiter becomes permanent/mobile no.

  Kind regards
  Amélie Chan

• I asked firefox to block an image on my blog, but firefox has blocked all images on the blog, there are no images in posts, pages, the theme, each image have been removed from the blog. Is it possible to restore the images.

  Hi, I was working on my wordpress blog that uses the theme "Intrepidity". I wanted to remove a header image I added to the header but could not find a way to remove, so I click right for an option. the option I took was "do you want firefox to block the image? I clicked Yes, and this is the last time I saw a picture on the blog. Firefox has deleted all the images in the blog, even the side bars are gone, the header is not more, every single photo on the post, pages disappeared. The blog is just a shell now. Is there a way I could have restored the blog images. This is the name of the blog:
  http://www.weightlosscontrolreviews.com/

  With the display site, click the site identity button (for more details about what it is to see the How do I know if my connection to a Web site is secure? article), and then click more information. This will open the page info dialog box.

  First, select the permissions tab, make sure that 'Load the Images' is set to allow (default selection should work as well)

  Then select the media tab, and then click the first item in the list. Use the down arrow key to scroll the list. If any element has the option 'Images of block of (field name)' selected, deselect the option.

  This should hopefully solve your problem, but see also the problems that cause to not show images.

  Some add-ons can also block images, for example, if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block images.

• Cannot send photos "there are no associated program to perform the requested operation."

  original title: Windows live mail

  I configured my gmail account in my windows live mail client. yesterday, I tried to send e-mail from the same gmail account to a friend, mail is sent successfully. but they were not able to open the images. I tried to view the slide show on my computer, then I got the error message "requested action cannot be performed, there is no associated program to perform the requested operation" then I tried to download the same images again, I got the same message. I tried to change the extension of all formats of image (for example, .jpg and .jpeg) but still, I had the same problem of association. I tried to change the registry because I had the article on the microsoft Web site, also I did system restore and reinstalled WLM also. HELP PLZ

  Hello
   
  1 have. what article you tried?

  2 is the issue limited to Windows Live Mail?

  3 is the issue limited only with a specific file extension?

  Check out the following and check:

  Method 1:

  Step 1:

  Try opening the file in the Windows Photo Viewer and check if you are facing the issue.

  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  Step 2:
   
  A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page. For example, if you have more than one web browser installed on your computer, you can choose one of them to be the default browser.

  This option allows to choose which programs you want Windows to use, by default.

  If a program does not appear in the list, you can make the default program using set Associations.

  1. open default programs by clicking the Start button, then programs by default .

  2. click associate a file type or Protocol with a program.
  3. click on the file type or protocol that you want the program to act as the default value.
  4. click on the program of change.
  5. click on the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If you don't see other programs or your program is not listed, click Browse to find the program that you want to use and then click Open
  6. click on OK.

  For more details follow the link below:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Method 2:
  Try to create a new user account and check if you have the same problem.
  To create a user account
  1. to open user accounts, click the Start button, click Control Panel, click user accounts and family safety, and then click user accounts .
  2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on to create a new account.
  4. type the name you want to assign to the user account, click an account type, and then click on an account.

  For more information follow the link below:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in the new user account, the user account may be corrupted.

  To fix the damaged user profile, you can check the link below:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  If you are facing problems with Windows Mail, I suggest you according to the query in the following forum.

  http://answers.Microsoft.com/en-us/windowslive

  Hope this information is useful.