three of my five psd files continues to receive "the importer reported a generic error.

Similar Questions

• importer reported a generic error with .psd files

  Hello

  Recently updates to Cs5. I get the "importer reported a generic error" when I try to import a .psd file. I have photoshop CS 2 installed.

  When I try to import jpeg, tiff or any other fotmat still I get errors such as "the bitdepth is not supported" and other such errors. I can't import still images. It's really frustrating.

  Work is about to export a still of the time line. Open in photoshop and save it as a psd with layers. import the layer I first wanted to import.

  any ideas of what could be the cause?

  Welcome to the forum.

  There are several considerations with still images:

  They MUST be RGB.

  They cannot be indexed or CMYK.

  They cannot be progressive JPEG.

  They can be a higher resolution to 8 bits.

  PSD have had problems, if a layer (or more) are smaller than the full pixel x pixels of resolution.

  They cannot be larger than 4096 x 4096. Prosaic, quality will be better, if we adapt to close the project frame size in PS.

  Let's see - to be a little more "they can't be', but I can't think of them now.

  All the foregoing apply to one of your images?

  If the above does not apply, so please give us details of the problem files.

  Good luck

  Hunt

• I continue to receive the same email again and again and not can't get the rest of my email address

  One of my friends sent me an email with an attachment. I received it very well, but now, I continue to receive the it again and again and more like it is stuck and cannot receive any emails more. Need help!

  Try to connect to your account via webmail and delete the message here.

• I get an error message Firefox is already running. I rebooted and redownloaded the program and continue to receive the same message

  Question
  I get an error message Firefox is already running. I rebooted and redownloaded the program and continue to receive the same message

  See:

  • https://support.Mozilla.com/kb/Firefox+is+already+running+but+is+not+responding
  • http://KB.mozillazine.org/Profile_in_use

• I am trying to cancel my hotmail account, but continue to receive the error one message or several paid services on my account must be cancelled everything first.

  I am trying to cancel my hotmail account, but continue to receive the error one message or several paid services on my account must be cancelled everything first.  I am not and have never been subscribed to all the services, I have a free account.  No one knows what to do to cancel the account?

  original title: I can't cancel my hotmail account

  Here is an article explaining how to avoid the trap of "paid services" during the closing of a Hotmail account: How to close a Hotmail account

  Noel

• We try to update the software on a computer and continue to receive the error 1719:

  We try to update the software on a computer and continue to receive the Error Message 1719: "Installer cannot access the Windows service". We tried to repair Windows install several times by the cancellation of registration registration without success. Windows Installer continues to block the update of the program

  We tried to install a new version of Kaspersky and have met the above problems.

  Hi Jug,

  Thanks for posting the question on the Microsoft Community Forums. I understand that while trying to update the software, you get an error 1719: "could access the Windows service install.

  This question is can be caused due to:

  You install or remove a program that uses Microsoft Installer Service to install a program on your computer. The Windows Installer Service is not running. The Windows Installer registry settings may be damaged or wrong.

  I suggest you check out the link to the troubleshooting steps.

  Error "The Windows Installer could access the Service" when you install or update programs on Windows 7 or Windows Vista.

  http://support.Microsoft.com/kb/2642495

  WARNING:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

  How to back up and restore the registry in Windows.

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What

  I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What would be my next step to get this race?

  CS2 (or earlier version) activation server has disappeared, then read below

  You MUST use the special number on the page, not your original serial number

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• Hello! We have formalized an annual subscription CC adobe, but show adobe that long three days, payment has passed, but we cannot receive the online chat, document does not. What is a problem?

  Hello! We have formalized an annual subscription CC adobe, but show adobe that long three days, payment has passed, but we cannot receive the online chat, document does not. What is a problem?

  Hello

  We do not have any active subscription under your account.

  Please share the following details in a private message so that we can help you properly.

  Order no:

  e-mail address:

  Thank you

  Varun

• I recently bought a Photoshop CS6 upgrade. (Dec 9, 2014).  Today, I downloaded the file (Photoshop_13_LS16.7z downloaded this OK when I tried to execute the file (Winzip) I received the message following 'failed to initialize installer.) Could be due

  I recently bought a Photoshop CS6 upgrade. (Dec 9, 2014).  Today, I downloaded the file (Photoshop_13_LS16.7z

  This downloaded OK

  When I tried to execute the file (Winzip) I received the following message

  "Installer failed initialize." Could be due to a missing file.  Please download Abobe support Advisor. »

  I tried to do and he told me that Adobe support Advisor no longer exists.

  Could you please say a solution.

  Extract it to a different location inside a folder dedicated and make sure not to destroy the hierarchy of files and folders within the archive. Also run the installation with privielges stuff and sufficient user security turned off.

  Mylenium

• Why some files are missing from the import screen?

  I'm trying to import some files in LR, but the import screen appears not all files that are in the folder I chose.

  I noticed that only when there are multiple files with the same base file name.  For example, when the file contains the following files, LR will display all of them in the form of import:

  • file. MP4
  • File1.jpg
  • File2.jpg
  • ...

  However, "file1.jpg" will not be shown in the import screen when the file contains the following files:

  • File1. MP4
  • File1.jpg
  • File2.jpg

  I was unable to find a LR preference that covers it.  Have I forgotten?

  Thank you!

  Here is a proposal... the emphasis on the word "guess"... When you have file1.mp4 and file1.jpg, .jpg is considered to be a "sidecar" and will not be imported... unless... you select the option in the preferences (general tab) that says: "Treat JPG files files next to raw as separate photos..." Yes, I know says "raw" option and your file is a 'mp4', but need you less than a minute to try ita

• Continue to receive the KB928365 when I try to start it I get a failure message.

  OT: How can I get them to stop sending me KB928365?.

  Microsoft keeps clogging my phone with this update line.  It's for .net Framework v2, but my computer has only v4.  I get the update, and when I try to start it I get a failure message.  How can I get Microsoft to stop giving this gift?

  Hide it.

  1. click on start, point to all programs, and then click Windows Update or Microsoft Update.
  2. click on customize.
  3. Click to uncheck the box next to the update you want to hide.
  4. expand the update you want to hide, and then click the checkbox "don't show me this update again".
  5. click on review and install the updates.

  Information about the update: https://support2.microsoft.com/kb/928365/en-au

  Known issues that may occur during the installation of the update

  • You receive a Windows Update '0 x 643' error code or an error code Windows install "1603" when you try to install an update for .NET Framework 1.0, 1.1 or 2.0
    For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
    923100

    (http://support.microsoft.com/kb/923100/)

    When you try to install an update for .NET Framework 1.0, 1.1 or 2.0, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  • You receive an error message "the folder 'Program Files' contains an invalid character" when you try to install an update to security for .NET 2.0 Framework
    For more information about this problem when you install an update to security on 64 bit versions of Windows Server 2003, click on the number below to view the article in the Microsoft Knowledge Base:
    923101

    (http://support.microsoft.com/kb/923101/)

    Error message when you try to install an update to security for .NET Framework 2.0 on a computer that is running Windows Server 2003 x 64 Edition: "Error 1324. The folder 'Program Files' contains an invalid character.

• LR does not recognize jpg files in file to download for the import

  I use LR 6.6 and I downloaded a few jpg files that I am now trying to import into LR.  Jpg files are in individual folders in a main folder in downloads.  When I try to copy the jpgs on import, I click on individual records, but LR does not open the file.  Any suggestions?

  Then, it is a file permissions issue. The folder that you put them in all first not permissions writable by your user name.

  You use a Mac or a PC Win.

  This option is in LR preferences, general tab, the Options to import at the bottom of this article.

• Dropped audio at the end of one. File VOB (problem with the import. VOBs, I guess)

  Here's what I did. I created several DVDs by recording VHS videos for them. I copied these DVD on my PC, giving me dozens of DVD files with. VOB files in them. I imported the. VOB files for each DVD in Premiere Pro sequences, but still get (which means that every time) dropped audio since the last images of each. VOB file in the sequence. So, in between all of them. VOB file in a video DVD full, there is a very brief break in audio. To be exact, the audio is 'cut' last 13 executives of each. VOB. However, the start of the next. VOB in the sequence begins with the audio as it should (at the very 1st picture). Video is not cut at the end of each. VOB and usually the transitions in the next. VOB smoothly, with no problems. However, occasionally, the latest image of one. VOB looks "glitched" (imagine two sequential images overlapping each other, but within a framework... so that you can see two of the same person who overlap who move from the 1st to the 2nd section). When this happens, the start of the next. VOB file in the sequence is largely pixelated for the first 2 or 3 images.

  I guess it's a problem with the import of first Pro CC. VOB files (she just can't handle.) VOBs). I would like to know if anyone has had a similar problem, and if you have found a solution.

  It is a long-standing problem.  Here's my work around.

  http://www.videohelp.com/software/XviD4PSP

  (Download version 5, not 7.)

  

• Download the file: continue to change the display settings

  Hi all

  These days, he continues to be for no reason.
  I put the display settings to my download folder. The list, by group type, sort by last modified.
  However, without one apparent for this folder, other than asking to display its content, the undisciplined directory view my files in a detailed list with the default sort.

  My path to the download folder have been changed from the original.
  As my Windows is not in English, the name of path is also different from the display name (don't think that will have an impact as the path name is different from the name in all versions of windows-English).

  The setting for the folder is 'General Elements' (in properties/customize).

  Does anyone have the same problem before? In my view, is not only in the download folder.
  Any idea to fix it? I tried using desktop.ini, because I used to do it a lot before, but nothing has changed in this file, when I tried to change the display using the browser configuration.
  As I don't remember the setting of desktop.ini, I looked in the documentation.
  Here: http://hwiegman.home.xs4all.nl/desktopini.html
  And here: http://msdn.microsoft.com/en-us/library/windows/desktop/cc144102%28v=vs.85%29.aspx
  I changed the setting to 3 Vid == Mod.
  As the problem appeared at random times, I do not know if my problem is solved :/

  I have of course a question of law in the desktop.ini file.
  If anyone has any idea... =)

  I had a similar problem.

  Certain way when you change the name of the folder.  He lost the file that held the parameters.

  I found that the easiest way is to rename the damaged library, I recommend

  "Temp of library".  Then create a new library with the name of the library, in your case downloads.

  or whatever you want to call it.

  Then in the pane left right click the new library.

  And then in the left pane right-click the library damaged, then copy the 'Library locations' by using the 'include a folder"in your new downloads folder.

  Close windows Explorer.  Reopen and verify that your settings are as you wish.

  You can delete the corrupted library.

• Continue to receive the error - cannot download episodes of your workflow

  Hello

  I'm using feed burner to add to create RSS feeds to add my

  ITunes podcast.

  But, when I add this feed - http://feeds.feedburner.com/wordpress/ueef

  I get the error message - unable to download episodes of your workflow.

  I want to connect Itunes to thisblog - where I'll post my future podcasts. At the moment I have a test post with a link to the

  file (which is hosted on an account of google reader with permissions to be available for anyone who wishes to

  Download or listen.

  I'm new pod casting and not really sure that I can do to solve this problem.

  Will be grateful for any assistance.

  Thanks in advance.

  There is no file at the URL you give to your Feedburner feed.

  The blog that link you has a link of RSS, but there is no media files. The episode on the blog page has a link to a media file to Google Reader, but it does not play and also the URL has no extension (for example, .mp3) so he won't have a podcast.

  Google Drive caused a lot of problems, and the indications are that he is not a suitable place to host a podcast.

  WordPress will build a podcast for you, but you must provide the URL of file media that are a direct link to the file, the extension and play in a browser, rather than forcing a download. I can't advise on the specific features of Wordpress, but they have a help page at https://en.support.wordpress.com/audio/podcasting/

  You can also find it useful to consult my page 'help you get started' on podcasting at http://wilmut.uk/pc